Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read
Read More

Dlouhá životnost PCD nástrojů zajišťuje až 10 krát vyšší produktivitu v porovnání s karbidovými nástroji.

 

PCD nástroje pro vysokorychlostní obrábění hliníku významně zkracují čas obrábění.

Různá provedení stopkových fréz s PCD, vrtáky s PCD a výstružníky s PCD pokrývají různé aplikace a strategie obrábění hliníku a významně zkracují časy obrábění a zvyšují produktivitu.

Vhodné pro hrubovací i dokončovací operace, všechny nástroje jsou připravené pro mikromazání (MQL).

Ostré řezné hrany a čelo s nízkým třením zaručují vynikající jakost obrobeného povrchu.

 

PCD nástroje

  • Ostré řezné hrany
  • Povrch čela s nízkým třením snižuje tvorbu nárůstků na řezné hraně
  • Výjimečná odolnost proti opotřebení, dlouhá životnost nástroje
  • Krátké dodací lhůty díky standardní nabídce nástrojů s PCD
  • Vhodné pro mikromazání

Vrtáky / Výstružníky

Drills

Stopkové frézy

end mills
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • N Non-Ferrous Materials (138)
    • N1
      Wrought Aluminum
      (138)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (138)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (138)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (138)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (44)
    • N6
      Carbon, Graphite Composites, CFRP
      (44)
    • N7
      MMC's
      (44)
Applications
Applications
  • Blind Hole Finishing Blind Hole Finishing (37)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (49)
  • Drilling Drilling (67)
  • Face Milling Face Milling (44)
  • Pocket Pocket (18)
  • Pocket Helical Pocket Helical (18)
  • Pocket Milling Pocket Milling (18)
  • Pocket Plunge Milling Pocket Plunge Milling (18)
  • Ramping Ramping (18)
  • Shoulder Milling Shoulder Milling (44)
  • Shoulder Roughing Shoulder Roughing (44)
  • Shoulder Square End Shoulder Square End (44)
  • Slot Milling Slot Milling (44)
  • Slot Square End Slot Square End (44)
  • Through Hole Finishing Through Hole Finishing (32)
  • Trochoidal Milling Trochoidal Milling (44)
Cutting Diameter
Cutting Diameter
  • 0.234 in (1)
  • 0.237 in (5)
  • 0.25 in (5)
  • 0.256 in (1)
  • 0.276 in (1)
  • 0.281 in (1)
  • 0.295 in (1)
  • 0.313 in (5)
  • 0.315 in (5)
  • 0.328 in (1)
  • 0.335 in (1)
  • 0.345 in (1)
  • 0.354 in (1)
  • 0.374 in (1)
  • 0.375 in (5)
  • 0.391 in (1)
  • 0.394 in (5)
  • 0.406 in (1)
  • 0.414 in (1)
  • 0.422 in (1)
  • 0.433 in (1)
  • 0.438 in (3)
  • 0.453 in (2)
  • 0.473 in (6)
  • 0.484 in (1)
  • 0.492 in (1)
  • 0.5 in (6)
  • 0.512 in (1)
  • 0.531 in (2)
  • 0.551 in (3)
  • 0.564 in (1)
  • 0.572 in (1)
  • 0.578 in (1)
  • 0.591 in (1)
  • 0.61 in (1)
  • 0.625 in (6)
  • 0.63 in (6)
  • 0.65 in (1)
  • 0.669 in (1)
  • 0.672 in (1)
  • 0.69 in (1)
  • 0.709 in (3)
  • 0.728 in (1)
  • 0.748 in (1)
  • 0.75 in (6)
  • 0.768 in (1)
  • 0.787 in (6)
  • 0.866 in (1)
  • 0.876 in (1)
  • 0.984 in (3)
  • 1.0 in (3)
  • 1.102 in (1)
  • 1.125 in (1)
  • 1.181 in (1)
  • 1.25 in (3)
  • 1.26 in (3)
  • 1.417 in (1)
  • 1.438 in (1)
  • 1.5 in (2)
  • 1.563 in (1)
  • 1.575 in (3)
  • 1.653 in (1)
  • 1.655 in (1)
  • 1.969 in (1)
  • 2.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.95 mm (1)
  • 6.0 mm (5)
  • 6.351 mm (5)
  • 6.5 mm (1)
  • 7.0 mm (1)
  • 7.15 mm (1)
  • 7.5 mm (1)
  • 7.95 mm (5)
  • 8.0 mm (5)
  • 8.326 mm (1)
  • 8.5 mm (1)
  • 8.725 mm (1)
  • 9.0 mm (1)
  • 9.5 mm (1)
  • 9.525 mm (5)
  • 9.925 mm (1)
  • 10.0 mm (5)
  • 10.326 mm (1)
  • 10.5 mm (1)
  • 10.726 mm (1)
  • 11.0 mm (1)
  • 11.125 mm (3)
  • 11.5 mm (2)
  • 12.0 mm (6)
  • 12.3 mm (1)
  • 12.5 mm (1)
  • 12.701 mm (6)
  • 13.0 mm (1)
  • 13.5 mm (2)
  • 14.0 mm (3)
  • 14.3 mm (1)
  • 14.5 mm (1)
  • 14.675 mm (1)
  • 15.0 mm (1)
  • 15.5 mm (1)
  • 15.875 mm (6)
  • 16.0 mm (6)
  • 16.5 mm (1)
  • 17.0 mm (1)
  • 17.075 mm (1)
  • 17.5 mm (1)
  • 18.0 mm (3)
  • 18.5 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (6)
  • 19.5 mm (1)
  • 20.0 mm (6)
  • 22.0 mm (1)
  • 22.25 mm (1)
  • 25.0 mm (3)
  • 25.401 mm (3)
  • 28.0 mm (1)
  • 28.576 mm (1)
  • 30.0 mm (1)
  • 31.75 mm (3)
  • 32.0 mm (3)
  • 36.0 mm (1)
  • 36.525 mm (1)
  • 38.1 mm (2)
  • 39.7 mm (1)
  • 40.0 mm (3)
  • 41.95 mm (1)
  • 42.0 mm (1)
  • 50.0 mm (1)
  • 50.801 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.0 mm (1)
  • 6.351 mm (1)
  • 7.95 mm (1)
  • 8.0 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (2)
  • 12.0 mm (1)
  • 12.701 mm (1)
  • 15.0 mm (6)
  • 15.875 mm (7)
  • 16.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 24.0 mm (1)
  • 25.0 mm (1)
  • 25.401 mm (3)
  • 28.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (2)
  • 40.0 mm (3)
  • 50.801 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.237 in (1)
  • 0.25 in (1)
  • 0.313 in (1)
  • 0.315 in (1)
  • 0.375 in (2)
  • 0.394 in (2)
  • 0.473 in (1)
  • 0.5 in (1)
  • 0.591 in (6)
  • 0.625 in (7)
  • 0.63 in (1)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.946 in (1)
  • 0.984 in (1)
  • 1.0 in (3)
  • 1.102 in (1)
  • 1.25 in (2)
  • 1.26 in (2)
  • 1.5 in (2)
  • 1.575 in (3)
  • 2.0 in (1)
Cutting Length Min to Cutting Length Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 34.9 mm (2)
  • 35.0 mm (1)
  • 40.301 mm (2)
  • 43.0 mm (4)
  • 48.7 mm (3)
  • 49.0 mm (4)
  • 53.1 mm (4)
  • 55.6 mm (3)
  • 56.0 mm (4)
  • 60.0 mm (6)
  • 63.0 mm (4)
  • 64.5 mm (2)
  • 71.0 mm (4)
  • 73.0 mm (1)
  • 74.5 mm (1)
  • 77.0 mm (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.054 in (3)
  • 0.062 in (2)
  • 0.067 in (4)
  • 0.076 in (7)
  • 0.083 in (4)
  • 0.088 in (7)
  • 0.093 in (6)
  • 0.097 in (4)
  • 0.1 in (2)
  • 0.11 in (4)
  • 0.113 in (1)
  • 0.115 in (1)
  • 0.12 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.748 in (4)
  • 0.906 in (2)
  • 0.984 in (2)
  • 1.339 in (4)
  • 1.379 in (3)
  • 1.417 in (3)
  • 1.496 in (3)
  • 1.614 in (3)
  • 1.655 in (1)
  • 1.693 in (4)
  • 1.713 in (2)
  • 1.732 in (2)
  • 1.772 in (6)
  • 1.988 in (1)
  • 2.0 in (1)
  • 2.087 in (4)
  • 2.165 in (4)
  • 2.205 in (3)
  • 2.244 in (1)
  • 2.382 in (3)
  • 2.402 in (4)
  • 2.48 in (1)
  • 2.618 in (4)
  • 2.677 in (1)
  • 2.777 in (3)
  • 2.795 in (1)
  • 2.874 in (1)
  • 3.012 in (2)
  • 3.031 in (3)
  • 3.189 in (1)
  • 3.248 in (2)
  • 3.269 in (4)
  • 3.642 in (1)
  • 3.661 in (4)
  • 3.761 in (1)
  • 3.976 in (4)
Reach Min to Reach Max
Reach
Reach
  • 19.0 mm (4)
  • 23.0 mm (2)
  • 25.0 mm (2)
  • 34.0 mm (4)
  • 35.0 mm (3)
  • 36.0 mm (3)
  • 38.0 mm (3)
  • 41.0 mm (3)
  • 42.0 mm (1)
  • 43.0 mm (4)
  • 43.5 mm (2)
  • 44.0 mm (2)
  • 45.0 mm (6)
  • 50.5 mm (1)
  • 50.801 mm (1)
  • 53.0 mm (4)
  • 55.0 mm (4)
  • 56.0 mm (3)
  • 57.0 mm (1)
  • 60.5 mm (3)
  • 61.0 mm (4)
  • 63.0 mm (1)
  • 66.5 mm (4)
  • 68.0 mm (1)
  • 70.5 mm (3)
  • 71.0 mm (1)
  • 73.0 mm (1)
  • 76.5 mm (2)
  • 77.0 mm (3)
  • 81.0 mm (1)
  • 82.5 mm (2)
  • 83.0 mm (4)
  • 92.5 mm (1)
  • 93.0 mm (4)
  • 95.5 mm (1)
  • 101.0 mm (4)
Reach Min to Reach Max
Connection Style
Connection Style
  • Short Taper Reamer Shank (17)
  • Straight-Cylindrical (121)
Number of Flutes
Number of Flutes
  • 2 (87)
  • 3 (2)
  • 4 (36)
  • 5 (2)
  • 6 (11)
cornerConfiguration
Corner Style
Corner Style
  • RADIUS (44)
Corner Radius
Corner Radius
  • 0.008 in (6)
  • 0.01 in (6)
  • 0.012 in (9)
  • 0.015 in (16)
  • 0.016 in (7)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (6)
  • 0.25 mm (6)
  • 0.301 mm (9)
  • 0.375 mm (16)
  • 0.4 mm (7)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (44)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (44)
Corner Chamfer Min to Corner Chamfer Max
application
Coating
Coating
  • Uncoated (49)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KD1410 (44)
  • KD1415 (94)
Drill Type
Drill Type
  • 81-01 (49)
Helix Hand
Helix Hand
  • N (45)
Lead in Length
Lead in Length
  • 0.2 mm (45)
Lead in Length Min to Lead in Length Max
Lead In Length
Lead In Length
  • 0.0 in (45)
Lead In Length Min to Lead In Length Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.008 in (2)
  • 0.01 in (2)
  • 0.011 in (4)
  • 0.014 in (4)
  • 0.017 in (3)
  • 0.019 in (3)
  • 0.023 in (6)
  • 0.029 in (3)
  • 0.03 in (3)
  • 0.037 in (2)
  • 0.038 in (2)
  • 0.048 in (4)
  • 0.049 in (6)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 5.301 mm (2)
  • 5.801 mm (2)
  • 7.301 mm (4)
  • 8.6 mm (2)
  • 9.1 mm (2)
  • 11.0 mm (3)
  • 11.701 mm (3)
  • 14.701 mm (3)
  • 14.8 mm (3)
  • 18.2 mm (3)
  • 19.1 mm (3)
  • 24.201 mm (2)
  • 24.6 mm (2)
  • 30.901 mm (2)
  • 31.1 mm (2)
  • 31.701 mm (3)
  • 31.951 mm (3)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (121)
  • SHORT TAPER (17)
Back-End Diameter
Back-End Diameter
  • 6.0 mm (5)
  • 6.351 mm (6)
  • 7.95 mm (6)
  • 8.0 mm (8)
  • 9.525 mm (7)
  • 10.0 mm (8)
  • 11.101 mm (2)
  • 11.125 mm (4)
  • 12.0 mm (9)
  • 12.701 mm (8)
  • 14.0 mm (6)
  • 14.3 mm (2)
  • 15.875 mm (7)
  • 16.0 mm (9)
  • 17.45 mm (1)
  • 17.5 mm (4)
  • 18.0 mm (6)
  • 19.05 mm (5)
  • 20.0 mm (10)
  • 25.0 mm (7)
  • 25.401 mm (2)
  • 30.0 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (5)
  • 35.0 mm (4)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.237 in (5)
  • 0.25 in (6)
  • 0.313 in (6)
  • 0.315 in (8)
  • 0.375 in (7)
  • 0.394 in (8)
  • 0.437 in (2)
  • 0.438 in (4)
  • 0.473 in (9)
  • 0.5 in (8)
  • 0.551 in (6)
  • 0.564 in (2)
  • 0.625 in (7)
  • 0.63 in (9)
  • 0.687 in (1)
  • 0.69 in (4)
  • 0.709 in (6)
  • 0.75 in (5)
  • 0.787 in (10)
  • 0.984 in (7)
  • 1.0 in (2)
  • 1.181 in (2)
  • 1.25 in (5)
  • 1.26 in (5)
  • 1.379 in (4)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Karbidové stopkové frézy

Stopkové PCD FRÉZY • ALCC • 2-břité • 1,5 X D • Vnitřní chlazení
(6 Products)
  • Face MillingFace Milling
  • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Trochoidal MillingTrochoidal Milling
  • Slotting: Square EndSlotting: Square End
  • Slotting: Square EndSlotting: Square End
  • Helical MillingHelical Milling
  • Plunge MillingPlunge Milling
  • PocketingPocketing
  • Ramping: BlankRamping: Blank
  • DrillingDrilling
  • 100665610100665610
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes
6752777 ALCC2RA0600N010HAR020IM ALCC2RA0600N010HAR020IM KD1410 Straight-Cylindrical 6.0000 .2362 6.0 .2362 10.0000 .3937 57.0000 2.244 36.0 1.417 0.2000 .0079 2
    List price:
    $311.59 /each.
    Your price::
    6752778 ALCC2RA0800N015HAR020IM ALCC2RA0800N015HAR020IM KD1410 Straight-Cylindrical 8.0000 .3150 8.0 .315 15.0000 .5906 63.0000 2.480 36.0 1.417 0.2000 .0079 2
      List price:
      $373.90 /each.
      Your price::
      6752779 ALCC2RA1000N015HAR020IM ALCC2RA1000N015HAR020IM KD1410 Straight-Cylindrical 10.0000 .3937 10.0 .3937 15.0000 .5906 76.0000 2.992 40.0 1.574 0.2000 .0079 2
        List price:
        $392.59 /each.
        Your price::
        6752780 ALCC2RA1200N020HAR030IM ALCC2RA1200N020HAR030IM KD1410 Straight-Cylindrical 12.0000 .4724 12.0 .4724 20.0000 .7874 83.0000 3.267 45.0 1.771 0.3000 .0118 2
          List price:
          $492.30 /each.
          Your price::
          6752791 ALCC2RA1600N025HAR030IM ALCC2RA1600N025HAR030IM KD1410 Straight-Cylindrical 16.0000 .6299 16.0 .6299 25.0000 .9843 95.0000 3.740 48.0 1.889 0.3000 .0118 2
            List price:
            $660.55 /each.
            Your price::
            6752792 ALCC2RA20600N028HAR030IM ALCC2RA20600N028HAR030IM KD1410 Straight-Cylindrical 20.0000 .7874 20.0 .7874 28.0000 1.102 108.0000 4.252 50.0 1.968 0.3000 .0118 2
              List price:
              $791.42 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Karbidové stopkové frézy

              VÍCEŘADÉ STOPKOVÉ PCD FRÉZY • ALCR • 2-břité • 2 X D • Vnitřní chlazení
              (3 Products)
              • Face MillingFace Milling
              • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Trochoidal MillingTrochoidal Milling
              • Slotting: Square EndSlotting: Square End
              • Slotting: Square EndSlotting: Square End
              • Helical MillingHelical Milling
              • Plunge MillingPlunge Milling
              • PocketingPocketing
              • Ramping: BlankRamping: Blank
              • DrillingDrilling
              • 100665610100665610
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes
              6752793 ALCR2RA1200N024HAR030IM ALCR2RA1200N024HAR030IM KD1410 Straight-Cylindrical 12.0000 .4724 12.0 .4724 24.0000 .9449 83.0000 3.267 45.0 1.771 0.3000 .0118 2
                List price:
                $660.55 /each.
                Your price::
                6752794 ALCR2RA1600N032HAR030IM ALCR2RA1600N032HAR030IM KD1410 Straight-Cylindrical 16.0000 .6299 16.0 .6299 32.0000 1.259 95.0000 3.740 48.0 1.889 0.3000 .0118 2
                  List price:
                  $872.43 /each.
                  Your price::
                  6752795 ALCR2RA2000N040HAR030IM ALCR2RA2000N040HAR030IM KD1410 Straight-Cylindrical 20.0000 .7874 20.0 .7874 40.0000 1.574 108.0000 4.252 50.0 1.968 0.3000 .0118 2
                    List price:
                    $1,028.22 /each.
                    Your price::
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is not available
                    Replacement Product This item may be available through a distributor

                    ORIGINAL PRODUCT

                    Rohové frézy

                    Víceřadé stopkové PCD FRÉZY • 2-3-břité • 1,25 X D • Vnitřní chlazení
                    (3 Products)
                    • Face MillingFace Milling
                    • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                    • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                    • Trochoidal MillingTrochoidal Milling
                    • Slotting: Square EndSlotting: Square End
                    • Slotting: Square EndSlotting: Square End
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes
                    6752800 ALSR2RA2500N032HAR040IM ALSR2RA2500N032HAR040IM KD1410 Straight-Cylindrical 25.0000 .9843 25.0 .9843 32.0000 1.259 115.0000 4.527 56.0 2.204 0.4000 .0158 2
                      List price:
                      $791.42 /each.