Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík

Indexovatelné vrtáky

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1458)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1455)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (1455)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (1458)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (1458)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (1455)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (1437)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (1437)
  • M Stainless Steel (1442)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (1442)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (1442)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (1430)
  • K Cast Iron (1451)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (1451)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (1451)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (1451)
  • N Non-Ferrous Materials (1387)
    • N1
      Wrought Aluminum (1384)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (1384)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (1384)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (1372)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1378)
    • N6
      Carbon, Graphite Composites, CFRP (1366)
    • N7
      MMC's (1356)
  • S High-Temp Alloys (1419)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (1413)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (1413)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (1419)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (1419)
  • H Hardened Materials (883)
    • H1
      Hardened Materials 44-48 HRC (883)
    • H2
      Hardened Materials 48-55 HRC (883)
    • H3
      Hardened Materials 56-60 HRC (883)
    • H4
      Hardened Materials >60 HRC (883)
Vybrat první volbu
  • BR (71)
  • CN (275)
  • DE (275)
  • GB (164)
  • IN (70)
  • SG (102)
  • US (366)
Applications
Applications
  • Chain Drilling Chain Drilling (82)
  • Convex Drilling Convex Drilling (1019)
  • Corner Drilling 45° Corner Drilling 45° (82)
  • Cross Hole Drilling Cross Hole Drilling (82)
  • Drilling Drilling (1654)
  • Flat Bottom Drilling Flat Bottom Drilling (576)
  • Half Cylindrical Drilling Half Cylindrical Drilling (82)
  • Inclined Entry Drilling Inclined Entry Drilling (1056)
  • Inclined Exit Drilling Inclined Exit Drilling (1056)
  • Stacked Plates Drilling Stacked Plates Drilling (576)
  • X-Offset Drilling X-Offset Drilling (1029)
Cutting Diameter
Cutting Diameter
  • 0.197 in (1)
  • 0.237 in (1)
  • 0.315 in (7)
  • 0.394 in (7)
  • 0.473 in (4)
  • 0.492 in (11)
  • 0.5 in (18)
  • 0.512 in (11)
  • 0.531 in (19)
  • 0.551 in (20)
  • 0.564 in (13)
  • 0.572 in (17)
  • 0.591 in (22)
  • 0.595 in (12)
  • 0.61 in (17)
  • 0.625 in (18)
  • 0.63 in (21)
  • 0.65 in (18)
  • 0.656 in (15)
  • 0.669 in (21)
  • 0.687 in (2)
  • 0.689 in (15)
  • 0.69 in (16)
  • 0.704 in (14)
  • 0.709 in (19)
  • 0.728 in (16)
  • 0.734 in (15)
  • 0.748 in (20)
  • 0.75 in (20)
  • 0.768 in (16)
  • 0.781 in (15)
  • 0.787 in (23)
  • 0.807 in (8)
  • 0.814 in (19)
  • 0.828 in (21)
  • 0.845 in (16)
  • 0.846 in (4)
  • 0.866 in (21)
  • 0.875 in (23)
  • 0.886 in (4)
  • 0.906 in (36)
  • 0.925 in (4)
  • 0.937 in (2)
  • 0.939 in (16)
  • 0.946 in (19)
  • 0.965 in (4)
  • 0.969 in (16)
  • 0.984 in (36)
  • 1.0 in (34)
  • 1.004 in (4)
  • 1.024 in (16)
  • 1.031 in (11)
  • 1.032 in (1)
  • 1.043 in (8)
  • 1.063 in (32)
  • 1.094 in (11)
  • 1.102 in (17)
  • 1.125 in (18)
  • 1.143 in (19)
  • 1.156 in (12)
  • 1.158 in (4)
  • 1.181 in (21)
  • 1.187 in (1)
  • 1.188 in (12)
  • 1.219 in (13)
  • 1.22 in (19)
  • 1.25 in (21)
  • 1.26 in (17)
  • 1.281 in (8)
  • 1.282 in (1)
  • 1.299 in (16)
  • 1.313 in (16)
  • 1.339 in (16)
  • 1.375 in (21)
  • 1.379 in (15)
  • 1.407 in (10)
  • 1.417 in (15)
  • 1.437 in (2)
  • 1.438 in (14)
  • 1.457 in (16)
  • 1.469 in (11)
  • 1.476 in (4)
  • 1.496 in (15)
  • 1.5 in (24)
  • 1.532 in (10)
  • 1.536 in (15)
  • 1.563 in (16)
  • 1.575 in (16)
  • 1.614 in (11)
  • 1.625 in (17)
  • 1.655 in (11)
  • 1.657 in (10)
  • 1.687 in (2)
  • 1.688 in (11)
  • 1.693 in (12)
  • 1.732 in (11)
  • 1.75 in (14)
  • 1.772 in (12)
  • 1.811 in (12)
  • 1.813 in (13)
  • 1.85 in (11)
  • 1.875 in (14)
  • 1.891 in (11)
  • 1.929 in (11)
  • 1.937 in (1)
  • 1.938 in (11)
  • 1.969 in (11)
  • 1.988 in (2)
  • 2.0 in (20)
  • 2.008 in (10)
  • 2.047 in (11)
  • 2.087 in (10)
  • 2.125 in (19)
  • 2.126 in (10)
  • 2.165 in (10)
  • 2.205 in (5)
  • 2.244 in (5)
  • 2.25 in (9)
  • 2.283 in (6)
  • 2.323 in (5)
  • 2.362 in (5)
  • 2.375 in (8)
  • 2.402 in (5)
  • 2.441 in (5)
  • 2.48 in (7)
  • 2.5 in (9)
  • 2.52 in (5)
  • 2.559 in (5)
  • 2.598 in (1)
  • 2.638 in (1)
  • 2.677 in (2)
  • 2.717 in (1)
  • 2.75 in (1)
  • 2.757 in (1)
  • 2.795 in (1)
  • 2.835 in (1)
  • 2.874 in (2)
  • 2.914 in (1)
  • 2.953 in (1)
  • 2.992 in (1)
  • 3.0 in (1)
  • 3.031 in (1)
  • 3.071 in (3)
  • 3.11 in (1)
  • 3.15 in (1)
  • 3.189 in (1)
  • 3.228 in (1)
  • 3.25 in (1)
  • 3.307 in (1)
  • 3.543 in (1)
  • 3.781 in (2)
  • 4.016 in (1)
  • 4.252 in (1)
  • 4.529 in (1)
  • 4.803 in (1)
  • 5.118 in (1)
  • 5.513 in (1)
  • 5.906 in (1)
  • 6.22 in (1)
  • 6.378 in (1)
  • 7.087 in (1)
  • 7.678 in (1)
  • 8.387 in (1)
  • 9.055 in (1)
  • 10.236 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 8.0 mm (7)
  • 10.0 mm (7)
  • 12.0 mm (4)
  • 12.5 mm (11)
  • 12.701 mm (18)
  • 13.0 mm (11)
  • 13.476 mm (8)
  • 13.5 mm (11)
  • 14.0 mm (20)
  • 14.3 mm (13)
  • 14.5 mm (17)
  • 15.0 mm (22)
  • 15.101 mm (12)
  • 15.5 mm (17)
  • 15.875 mm (18)
  • 16.0 mm (21)
  • 16.5 mm (18)
  • 16.651 mm (15)
  • 17.0 mm (21)
  • 17.45 mm (2)
  • 17.475 mm (15)
  • 17.5 mm (16)
  • 17.85 mm (14)
  • 18.0 mm (19)
  • 18.5 mm (16)
  • 18.651 mm (15)
  • 19.0 mm (20)
  • 19.05 mm (20)
  • 19.5 mm (16)
  • 19.826 mm (14)
  • 19.85 mm (1)
  • 20.0 mm (23)
  • 20.5 mm (8)
  • 20.651 mm (19)
  • 21.0 mm (21)
  • 21.451 mm (16)
  • 21.5 mm (4)
  • 22.0 mm (21)
  • 22.225 mm (23)
  • 22.5 mm (4)
  • 23.0 mm (36)
  • 23.5 mm (4)
  • 23.8 mm (2)
  • 23.826 mm (16)
  • 24.0 mm (19)
  • 24.5 mm (4)
  • 24.625 mm (16)
  • 25.0 mm (36)
  • 25.401 mm (34)
  • 25.5 mm (4)
  • 26.0 mm (16)
  • 26.175 mm (11)
  • 26.201 mm (1)
  • 26.5 mm (8)
  • 27.0 mm (32)
  • 27.8 mm (11)
  • 28.0 mm (17)
  • 28.576 mm (18)
  • 29.0 mm (19)
  • 29.35 mm (12)
  • 29.401 mm (4)
  • 30.0 mm (21)
  • 30.151 mm (1)
  • 30.175 mm (12)
  • 30.951 mm (3)
  • 30.975 mm (10)
  • 31.0 mm (19)
  • 31.75 mm (21)
  • 32.0 mm (17)
  • 32.525 mm (8)
  • 32.551 mm (1)
  • 33.0 mm (16)
  • 33.35 mm (16)
  • 34.0 mm (16)
  • 34.926 mm (21)
  • 35.0 mm (15)
  • 35.7 mm (10)
  • 36.0 mm (15)
  • 36.5 mm (2)
  • 36.525 mm (14)
  • 37.0 mm (16)
  • 37.301 mm (2)
  • 37.325 mm (9)
  • 37.5 mm (4)
  • 38.0 mm (15)
  • 38.1 mm (24)
  • 38.875 mm (10)
  • 39.0 mm (15)
  • 39.7 mm (16)
  • 40.0 mm (16)
  • 41.0 mm (11)
  • 41.276 mm (17)
  • 42.0 mm (11)
  • 42.051 mm (10)
  • 42.85 mm (2)
  • 42.875 mm (11)
  • 43.0 mm (12)
  • 44.0 mm (11)
  • 44.45 mm (14)
  • 45.0 mm (12)
  • 46.0 mm (12)
  • 46.051 mm (13)
  • 47.0 mm (11)
  • 47.625 mm (14)
  • 48.0 mm (11)
  • 49.0 mm (11)
  • 49.2 mm (1)
  • 49.225 mm (11)
  • 50.0 mm (11)
  • 50.5 mm (2)
  • 50.801 mm (20)
  • 51.0 mm (10)
  • 52.0 mm (11)
  • 53.0 mm (10)
  • 53.975 mm (19)
  • 54.0 mm (10)
  • 55.0 mm (10)
  • 56.0 mm (5)
  • 57.0 mm (5)
  • 57.151 mm (9)
  • 58.0 mm (6)
  • 59.0 mm (5)
  • 60.0 mm (5)
  • 60.325 mm (8)
  • 61.0 mm (5)
  • 62.0 mm (5)
  • 63.0 mm (7)
  • 63.5 mm (9)
  • 64.0 mm (5)
  • 65.0 mm (5)
  • 66.0 mm (1)
  • 67.0 mm (1)
  • 68.0 mm (2)
  • 69.0 mm (1)
  • 69.851 mm (1)
  • 70.0 mm (1)
  • 71.0 mm (1)
  • 72.0 mm (1)
  • 73.0 mm (2)
  • 74.0 mm (1)
  • 75.0 mm (1)
  • 76.0 mm (1)
  • 76.2 mm (1)
  • 77.0 mm (1)
  • 78.0 mm (3)
  • 79.0 mm (1)
  • 80.0 mm (1)
  • 81.0 mm (1)
  • 82.0 mm (1)
  • 82.551 mm (1)
  • 84.0 mm (1)
  • 90.0 mm (1)
  • 96.0 mm (2)
  • 102.0 mm (1)
  • 108.0 mm (1)
  • 115.0 mm (1)
  • 122.0 mm (1)
  • 130.0 mm (1)
  • 140.0 mm (1)
  • 150.0 mm (1)
  • 158.0 mm (1)
  • 162.0 mm (1)
  • 180.0 mm (1)
  • 195.0 mm (1)
  • 213.0 mm (1)
  • 230.0 mm (1)
  • 260.0 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (195)
  • Stable (304)
  • Unstable (250)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 8.0 mm (2)
  • 9.601 mm (1)
  • 10.0 mm (2)
  • 11.3 mm (1)
  • 24.0 mm (1)
  • 25.0 mm (4)
  • 25.401 mm (3)
  • 26.0 mm (3)
  • 26.975 mm (1)
  • 27.0 mm (4)
  • 28.0 mm (5)
  • 28.6 mm (3)
  • 29.0 mm (5)
  • 30.0 mm (5)
  • 30.175 mm (2)
  • 31.0 mm (5)
  • 31.75 mm (3)
  • 32.0 mm (5)
  • 33.0 mm (5)
  • 33.325 mm (2)
  • 34.0 mm (5)
  • 34.95 mm (3)
  • 35.0 mm (4)
  • 35.7 mm (2)
  • 36.0 mm (5)
  • 37.0 mm (4)
  • 37.275 mm (2)
  • 37.5 mm (4)
  • 38.0 mm (4)
  • 38.1 mm (10)
  • 38.401 mm (6)
  • 39.0 mm (8)
  • 39.676 mm (2)
  • 40.0 mm (4)
  • 40.45 mm (4)
  • 40.5 mm (3)
  • 40.651 mm (2)
  • 41.0 mm (2)
  • 41.301 mm (3)
  • 41.651 mm (2)
  • 42.0 mm (11)
  • 42.875 mm (2)
  • 42.901 mm (7)
  • 43.0 mm (1)
  • 43.5 mm (5)
  • 44.0 mm (4)
  • 44.45 mm (5)
  • 44.7 mm (2)
  • 45.0 mm (7)
  • 45.25 mm (2)
  • 45.276 mm (4)
  • 46.0 mm (4)
  • 46.026 mm (2)
  • 46.5 mm (5)
  • 46.6 mm (2)
  • 47.0 mm (1)
  • 47.625 mm (9)
  • 47.651 mm (3)
  • 48.0 mm (11)
  • 48.5 mm (3)
  • 48.7 mm (3)