Chamfer Inserts for use with KSEM
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (12)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(12)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(12)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(12)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(12)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
- M Stainless Steel (12)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(12)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(12)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(12)
- K Cast Iron (12)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(12)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(12)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
- N Non-Ferrous Materials (12)
- N1Wrought Aluminum (12)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(12)
- N3High-Silicon Aluminum Alloys Si >12.2%(12)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (12)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (12)
- N6Carbon, Graphite Composites, CFRP (12)
- N7MMC's (12)
- S High-Temp Alloys (12)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(12)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(12)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(12)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(12)
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC7015 (4)
- KC7140 (4)
- KC7315 (4)
insertGeometry
Insert IC Size
Insert IC Size
- 5.551 mm(3)
- 6.351 mm(3)
- 7.95 mm(3)
- 9.525 mm(3)
komu
Insert IC Size
Insert IC Size
- 0.219 in(3)
- 0.25 in(3)
- 0.313 in(3)
- 0.375 in(3)
komu
Cutting Edge Length
Cutting Edge Length
- 9.625 mm(3)
- 11.0 mm(3)
- 13.75 mm(3)
- 16.5 mm(3)
komu
Cutting Edge Length
Cutting Edge Length
- 0.379 in(3)
- 0.433 in(3)
- 0.541 in(3)
- 0.65 in(3)
komu
No filters matching ""
