Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Systém modulárních vrtáků KSEM

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1389)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1389)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1389)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1389)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1389)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1193)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1193)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1164)
  • M Stainless Steel (1060)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1060)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1060)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1060)
  • K Cast Iron (1081)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1081)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1081)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1081)
  • N Non-Ferrous Materials (944)
    • N1
      Wrought Aluminum
      (944)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (944)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (944)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (944)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (864)
    • N6
      Carbon, Graphite Composites, CFRP
      (864)
    • N7
      MMC's
      (864)
  • S High-Temp Alloys (944)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (944)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (944)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (944)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (944)
  • H Hardened Materials (29)
    • H1
      Hardened Materials 44-48 HRC
      (29)
    • H2
      Hardened Materials 48-55 HRC
      (29)
    • H3
      Hardened Materials 56-60 HRC
      (29)
    • H4
      Hardened Materials >60 HRC
      (29)
Select First Choice
  • BR (111)
  • CN (265)
  • DE (245)
  • GB (197)
  • IN (189)
  • SG (161)
  • US (258)
Applications
Applications
  • Countersinking Countersinking (42)
  • Drilling Drilling (595)
  • Inclined Entry Drilling Inclined Entry Drilling (549)
  • Inclined Exit Drilling Inclined Exit Drilling (549)
  • Stacked Plates Drilling Stacked Plates Drilling (549)
Cutting Diameter
Cutting Diameter
  • 0.4921 in (29)
  • 0.5 in (27)
  • 0.5039 in (25)
  • 0.509 in (24)
  • 0.5118 in (37)
  • 0.5157 in (25)
  • 0.516 in (26)
  • 0.5197 in (26)
  • 0.531 in (26)
  • 0.5315 in (24)
  • 0.5512 in (30)
  • 0.5709 in (23)
  • 0.5906 in (36)
  • 0.5937 in (25)
  • 0.594 in (25)
  • 0.6102 in (30)
  • 0.6299 in (30)
  • 0.6315 in (23)
  • 0.6335 in (23)
  • 0.6339 in (23)
  • 0.634 in (26)
  • 0.6358 in (24)
  • 0.6374 in (23)
  • 0.6378 in (27)
  • 0.6406 in (24)
  • 0.641 in (26)
  • 0.6496 in (30)
  • 0.6693 in (32)
  • 0.672 in (25)
  • 0.689 in (31)
  • 0.7283 in (23)
  • 0.748 in (42)
  • 0.75 in (37)
  • 0.7559 in (29)
  • 0.757 in (30)
  • 0.7571 in (28)
  • 0.7579 in (31)
  • 0.7587 in (28)
  • 0.759 in (31)
  • 0.7606 in (28)
  • 0.7618 in (29)
  • 0.7622 in (27)
  • 0.763 in (27)
  • 0.7657 in (30)
  • 0.766 in (29)
  • 0.7677 in (44)
  • 0.8071 in (28)
  • 0.8268 in (28)
  • 0.846 in (23)
  • 0.8701 in (25)
  • 0.872 in (24)
  • 0.875 in (25)
  • 0.8752 in (27)
  • 0.8835 in (26)
  • 0.884 in (25)
  • 0.8858 in (34)
  • 0.8906 in (24)
  • 0.9055 in (25)
  • 0.9252 in (32)
  • 0.9449 in (24)
  • 0.9843 in (48)
  • 0.987 in (36)
  • 0.9941 in (30)
  • 0.9961 in (30)
  • 1.0 in (36)
  • 1.0039 in (37)
  • 1.0055 in (29)
  • 1.0079 in (24)
  • 1.008 in (27)
  • 1.0098 in (25)
  • 1.01 in (25)
  • 1.0106 in (28)
  • 1.011 in (24)
  • 1.0126 in (24)
  • 1.0142 in (24)
  • 1.0157 in (23)
  • 1.016 in (23)
  • 1.0161 in (27)
  • 1.0433 in (23)
  • 1.063 in (27)
  • 1.0827 in (25)
  • 1.122 in (26)
  • 1.1417 in (29)
  • 1.1614 in (24)
  • 1.2008 in (28)
  • 1.2402 in (27)
  • 1.25 in (25)
  • 1.2598 in (30)
  • 1.2992 in (27)
  • 1.3386 in (30)
  • 1.3583 in (23)
  • 1.378 in (30)
  • 1.3976 in (24)
  • 1.406 in (23)
  • 1.4173 in (31)
  • 1.4567 in (24)
  • 1.4961 in (30)
  • 1.5 in (25)
  • 1.5354 in (29)
  • 1.5748 in (25)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.5 mm (29)
  • 12.6 mm (22)
  • 12.7 mm (27)
  • 12.8 mm (25)
  • 12.93 mm (25)
  • 13.0 mm (37)
  • 13.1 mm (27)
  • 13.2 mm (26)
  • 13.5 mm (29)
  • 14.0 mm (30)
  • 14.1 mm (22)
  • 14.29 mm (22)
  • 14.5 mm (23)
  • 15.0 mm (36)
  • 15.08 mm (27)
  • 15.5 mm (30)
  • 16.0 mm (30)
  • 16.04 mm (23)
  • 16.09 mm (27)
  • 16.1 mm (23)
  • 16.15 mm (24)
  • 16.19 mm (23)
  • 16.2 mm (27)
  • 16.27 mm (28)
  • 16.5 mm (30)
  • 17.0 mm (32)
  • 17.07 mm (25)
  • 17.46 mm (22)
  • 17.5 mm (31)
  • 18.5 mm (23)
  • 19.0 mm (42)
  • 19.05 mm (37)
  • 19.2 mm (29)
  • 19.228 mm (30)
  • 19.23 mm (28)
  • 19.25 mm (31)
  • 19.27 mm (32)
  • 19.32 mm (28)
  • 19.35 mm (29)
  • 19.36 mm (27)
  • 19.38 mm (27)
  • 19.45 mm (32)
  • 19.5 mm (44)
  • 20.5 mm (28)
  • 21.0 mm (28)
  • 21.5 mm (26)
  • 22.0 mm (22)
  • 22.1 mm (25)
  • 22.15 mm (24)
  • 22.23 mm (29)
  • 22.44 mm (28)
  • 22.5 mm (34)
  • 22.62 mm (24)
  • 23.0 mm (25)
  • 23.5 mm (32)
  • 24.0 mm (24)
  • 24.5 mm (22)
  • 25.0 mm (48)
  • 25.07 mm (36)
  • 25.25 mm (30)
  • 25.3 mm (30)
  • 25.4 mm (36)
  • 25.5 mm (37)
  • 25.54 mm (29)
  • 25.6 mm (27)
  • 25.61 mm (24)
  • 25.65 mm (25)
  • 25.654 mm (25)
  • 25.67 mm (29)
  • 25.72 mm (24)
  • 25.76 mm (24)
  • 25.8 mm (23)
  • 25.806 mm (23)
  • 25.81 mm (27)
  • 26.0 mm (22)
  • 26.5 mm (23)
  • 27.0 mm (27)
  • 27.5 mm (25)
  • 28.0 mm (22)
  • 28.5 mm (26)
  • 29.0 mm (29)
  • 29.5 mm (24)
  • 30.5 mm (28)
  • 31.0 mm (22)
  • 31.5 mm (27)
  • 31.75 mm (25)
  • 32.0 mm (30)
  • 33.0 mm (27)
  • 34.0 mm (30)
  • 34.5 mm (23)
  • 35.0 mm (30)
  • 35.5 mm (24)
  • 35.72 mm (23)
  • 36.0 mm (31)
  • 37.0 mm (24)
  • 38.0 mm (30)
  • 38.1 mm (25)
  • 38.46 mm (23)
  • 39.0 mm (29)
  • 40.0 mm (25)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 13.462 mm (1)
  • 13.5 mm (1)
  • 14.5 mm (2)
  • 18.0 mm (2)
  • 22.0 mm (2)
  • 24.0 mm (2)
  • 26.0 mm (2)
  • 28.0 mm (2)
  • 30.0 mm (2)
  • 32.0 mm (2)
  • 36.0 mm (2)
  • 38.1 mm (2)
  • 38.786 mm (2)
  • 40.0 mm (2)
  • 40.483 mm (2)
  • 41.671 mm (2)
  • 42.0 mm (5)
  • 42.863 mm (2)
  • 44.054 mm (2)
  • 45.245 mm (2)
  • 46.434 mm (2)
  • 48.0 mm (6)
  • 52.07 mm (3)
  • 54.0 mm (5)
  • 57.15 mm (2)
  • 59.944 mm (5)
  • 60.0 mm (6)
  • 63.5 mm (3)
  • 64.643 mm (2)
  • 65.484 mm (3)
  • 66.0 mm (5)
  • 66.675 mm (2)
  • 69.454 mm (2)
  • 70.0 mm (5)
  • 71.438 mm (2)
  • 71.882 mm (3)
  • 72.0 mm (7)
  • 75.408 mm (2)
  • 77.391 mm (2)
  • 77.978 mm (2)
  • 78.0 mm (7)
  • 80.0 mm (7)
  • 84.0 mm (5)
  • 84.074 mm (3)
  • 88.9 mm (2)
  • 89.916 mm (6)
  • 90.0 mm (12)
  • 95.25 mm (2)
  • 96.0 mm (8)
  • 98.0 mm (4)
  • 99.0 mm (5)
  • 100.0 mm (11)
  • 100.013 mm (2)
  • 100.076 mm (3)
  • 102.0 mm (4)
  • 105.0 mm (4)
  • 108.0 mm (4)
  • 109.982 mm (2)
  • 110.0 mm (6)
  • 111.0 mm (5)
  • 112.0 mm (6)
  • 114.0 mm (3)
  • 117.0 mm (4)
  • 119.888 mm (2)
  • 120.0 mm (14)
  • 126.0 mm (6)
  • 127.0 mm (2)
  • 130.0 mm (14)
  • 135.0 mm (2)
  • 139.954 mm (2)
  • 140.0 mm (17)
  • 145.0 mm (2)
  • 150.0 mm (9)
  • 150.114 mm (2)
  • 152.4 mm (2)
  • 154.0 mm (6)
  • 160.0 mm (14)
  • 162.7 mm (2)
  • 165.0 mm (4)
  • 168.0 mm (8)
  • 170.0 mm (3)
  • 174.6 mm (2)
  • 175.0 mm (3)
  • 177.8 mm (2)
  • 180.0 mm (4)
  • 182.0 mm (8)
  • 185.0 mm (5)
  • 190.0 mm (3)
  • 190.5 mm (5)
  • 195.0 mm (3)
  • 196.0 mm (7)
  • 200.0 mm (3)
  • 203.2 mm (2)
  • 210.0 mm (7)
  • 224.0 mm (8)
  • 225.0 mm (2)
  • 245.0 mm (2)
  • 254.0 mm (4)
  • 265.0 mm (2)
  • 285.0 mm (2)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.5315 in (2)
  • 0.7087 in (2)
  • 0.8661 in (2)
  • 0.9449 in (2)
  • 1.1024 in (3)
  • 1.1811 in (2)
  • 1.4173 in (2)
  • 1.5 in (2)
  • 1.527 in (2)
  • 1.5748 in (2)
  • 1.5938 in (2)
  • 1.6406 in (2)
  • 1.6535 in (5)
  • 1.6875 in (2)
  • 1.7344 in (2)
  • 1.7813 in (2)
  • 1.8281 in (2)
  • 1.8898 in (6)
  • 2.05 in (3)
  • 2.126 in (5)
  • 2.25 in (2)
  • 2.36 in (5)
  • 2.3622 in (6)
  • 2.5 in (3)
  • 2.545 in (2)
  • 2.5781 in (3)
  • 2.5984 in (5)
  • 2.625 in (2)
  • 2.7344 in (2)
  • 2.7559 in (5)
  • 2.8125 in (2)
  • 2.83 in (3)
  • 2.8346 in (7)
  • 2.9688 in (2)
  • 3.0469 in (2)
  • 3.07 in (2)
  • 3.0709 in (7)
  • 3.1496 in (7)
  • 3.3071 in (5)
  • 3.31 in (3)
  • 3.5 in (2)
  • 3.54 in (6)
  • 3.5433 in (12)
  • 3.75 in (2)
  • 3.7795 in (6)
  • 3.78 in (3)
  • 3.8583 in (4)
  • 3.8976 in (2)
  • 3.898 in (3)
  • 3.937 in (11)
  • 3.9375 in (2)
  • 3.94 in (3)
  • 4.016 in (3)
  • 4.134 in (3)
  • 4.252 in (4)
  • 4.33 in (2)
  • 4.3307 in (6)
  • 4.37 in (3)
  • 4.3701 in (2)
  • 4.4094 in (6)
  • 4.488 in (2)
  • 4.606 in (3)
  • 4.72 in (2)
  • 4.7244 in (13)
  • 4.9606 in (6)
  • 5.0 in (2)
  • 5.1181 in (14)
  • 5.315 in (2)
  • 5.51 in (2)
  • 5.5118 in (17)
  • 5.7087 in (2)
  • 5.9055 in (9)
  • 5.91 in (2)
  • 6.0 in (2)
  • 6.063 in (6)
  • 6.2992 in (13)
  • 6.4055 in (2)
  • 6.484 in (2)
  • 6.4961 in (4)
  • 6.6142 in (8)
  • 6.6929 in (3)
  • 6.72 in (2)
  • 6.874 in (2)
  • 6.8898 in (3)
  • 7.0 in (2)
  • 7.031 in (2)
  • 7.0866 in (4)
  • 7.11 in (2)
  • 7.1654 in (8)
  • 7.2835 in (5)
  • 7.4803 in (3)
  • 7.5 in (5)
  • 7.6772 in (3)
  • 7.7165 in (7)
  • 7.874 in (3)
  • 8.0 in (2)
  • 8.2677 in (7)
  • 8.8189 in (8)
  • 8.8583 in (2)
  • 10.0 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 2.0919 in (2)
  • 2.126 in (2)
  • 2.2169 in (2)
  • 2.3228 in (5)
  • 2.3419 in (2)
  • 2.4669 in (2)
  • 2.5919 in (3)
  • 2.6771 in (4)
  • 2.7169 in (2)
  • 2.8419 in (2)
  • 2.9527 in (4)
  • 2.9669 in (3)
  • 3.01 in (2)
  • 3.0919 in (3)
  • 3.13 in (2)
  • 3.2169 in (2)
  • 3.2677 in (3)
  • 3.4252 in (5)
  • 3.4669 in (3)
  • 3.51 in (8)
  • 3.5919 in (2)
  • 3.622 in (5)
  • 3.7169 in (2)
  • 3.8419 in (2)
  • 3.937 in (8)
  • 3.96 in (5)
  • 3.9669 in (2)
  • 4.01 in (2)
  • 4.0919 in (2)
  • 4.13 in (2)
  • 4.29 in (2)
  • 4.2913 in (4)
  • 4.31 in (3)
  • 4.34 in (4)
  • 4.3419 in (2)
  • 4.3701 in (3)
  • 4.38 in (2)
  • 4.4669 in (2)
  • 4.5276 in (5)
  • 4.6063 in (4)
  • 4.61 in (3)
  • 4.7169 in (2)
  • 4.8425 in (2)
  • 4.8819 in (2)
  • 4.92 in (2)
  • 4.9213 in (4)
  • 4.9669 in (3)
  • 5.09 in (5)
  • 5.0919 in (4)
  • 5.1969 in (4)
  • 5.2169 in (3)
  • 5.255 in (2)
  • 5.3149 in (4)
  • 5.34 in (2)
  • 5.3419 in (3)
  • 5.3543 in (2)
  • 5.3937 in (3)
  • 5.7874 in (4)
  • 5.8268 in (8)
  • 5.84 in (2)
  • 5.8419 in (6)
  • 5.85 in (3)
  • 6.0236 in (2)
  • 6.142 in (2)
  • 6.3386 in (5)
  • 6.3419 in (4)
  • 6.36 in (3)
  • 6.4173 in (4)
  • 6.7169 in (4)
  • 6.811 in (4)
  • 6.8419 in (4)
  • 7.0472 in (3)
  • 7.0866 in (4)
  • 7.2835 in (4)
  • 7.7165 in (5)
  • 7.7169 in (4)
  • 7.8346 in (4)
  • 7.8419 in (4)
  • 8.1693 in (5)
  • 8.189 in (3)
  • 8.3419 in (3)
  • 8.3858 in (5)
  • 8.4252 in (3)
  • 8.4669 in (4)
  • 8.594 in (3)
  • 8.6732 in (3)
  • 9.0157 in (4)
  • 9.09 in (3)
  • 9.0919 in (3)
  • 9.1693 in (5)
  • 9.2913 in (3)
  • 9.4094 in (3)
  • 9.59 in (5)
  • 9.6457 in (4)
  • 9.7169 in (3)
  • 10.1575 in (3)
  • 10.3419 in (4)
  • 10.3543 in (4)
  • 11.063 in (3)
  • 12.7953 in (3)
Reach Min to Reach Max
Reach
Reach
  • 53.134 mm (2)
  • 54.0 mm (2)
  • 56.309 mm (2)
  • 59.0 mm (5)
  • 59.484 mm (2)
  • 62.659 mm (2)
  • 65.834 mm (3)
  • 68.0 mm (5)
  • 69.009 mm (2)
  • 72.184 mm (2)
  • 75.0 mm (4)
  • 75.359 mm (3)
  • 76.454 mm (2)
  • 78.534 mm (3)
  • 79.502 mm (2)
  • 81.709 mm (2)
  • 83.0 mm (3)
  • 87.0 mm (5)
  • 88.059 mm (3)
  • 89.154 mm (8)
  • 91.234 mm (2)
  • 92.0 mm (5)
  • 94.409 mm (2)
  • 97.584 mm (2)
  • 100.0 mm (8)
  • 100.584 mm (5)
  • 100.759 mm (2)
  • 101.854 mm (2)
  • 103.934 mm (2)
  • 104.902 mm (2)
  • 108.966 mm (2)
  • 109.0 mm (4)
  • 109.474 mm (3)
  • 110.236 mm (4)
  • 110.284 mm (2)
  • 111.0 mm (3)
  • 111.252 mm (2)
  • 113.459 mm (2)
  • 115.0 mm (5)
  • 117.0 mm (4)
  • 117.094 mm (3)
  • 119.809 mm (2)
  • 123.0 mm (2)
  • 124.0 mm (2)
  • 124.968 mm (2)
  • 125.0 mm (4)
  • 126.159 mm (3)
  • 129.286 mm (5)
  • 129.334 mm (4)
  • 132.0 mm (4)
  • 132.509 mm (3)
  • 133.477 mm (2)
  • 135.0 mm (4)
  • 135.636 mm (2)
  • 135.684 mm (3)
  • 136.0 mm (2)
  • 137.0 mm (3)
  • 147.0 mm (5)
  • 148.0 mm (8)
  • 148.384 mm (6)
  • 148.59 mm (3)
  • 153.0 mm (3)
  • 156.0 mm (3)
  • 161.0 mm (5)
  • 161.084 mm (4)
  • 161.544 mm (3)
  • 163.0 mm (4)
  • 165.0 mm (3)
  • 170.609 mm (4)
  • 173.0 mm (4)
  • 173.784 mm (4)
  • 179.0 mm (3)
  • 180.0 mm (4)
  • 185.0 mm (4)
  • 196.0 mm (5)
  • 196.009 mm (4)
  • 199.0 mm (4)
  • 199.184 mm (4)
  • 207.5 mm (5)
  • 208.0 mm (3)
  • 211.884 mm (3)
  • 213.0 mm (6)
  • 214.0 mm (3)
  • 215.059 mm (4)
  • 218.288 mm (3)
  • 220.3 mm (3)
  • 229.0 mm (4)
  • 230.886 mm (3)
  • 230.934 mm (3)
  • 232.9 mm (5)