Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Nástroj vyrobený 3D tiskem určený k vyvrtávání otvorů statoru v hliníkových pláštích elektromotorů.

Tato verze nástroje má nově navrženou konstrukci ramen, větší středovou trubku z uhlíkových vláken a hmotnost celkem 7,3 kg.

Tento kombinovaný nástroj je schopen obrábět v jediné operaci tři velké průměry, čímž výrobcům automobilových součástí šetří čas přípravy i vlastního obrábění a zajišťuje vysokou přesnost a kvalitu povrchu.

Nástroj pro obrábění tří průměrů v jedné operaci zajišťuje dodržení přísných tolerancí souososti a válcovitosti a zároveň výrazně zkracuje dobu cyklu.

Odlehčený kombinovaný nástroj vyrobený 3D tiskem umožňuje rychlejší výměnu nástroje a zkrácení doby vystružování i na méně výkonných strojích.

  

  

  

Simulace procesu

  

  

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (912)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(864)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(912)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(912)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(912)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(912)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(912)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(912)
    • M Stainless Steel (794)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(794)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(794)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(794)
    • K Cast Iron (755)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(754)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(753)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(753)
    • N Non-Ferrous Materials (436)
      • N1
        Wrought Aluminum (408)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(418)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(219)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (412)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (361)
      • N6
        Carbon, Graphite Composites, CFRP (341)
      • N7
        MMC's (159)
    • S High-Temp Alloys (765)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(764)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(764)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(764)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(733)
    • H Hardened Materials (279)
      • H1
        Hardened Materials 44-48 HRC(279)
      • H2
        Hardened Materials 48-55 HRC(231)
      • H3
        Hardened Materials 56-60 HRC(154)
      • H4
        Hardened Materials >60 HRC(154)
    • C CFRP Materials (237)
      • C1
        CFRP, CFRP / CFRP (229)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (158)
    Vybrat první volbu
    • IN (25)
    • US (1)
    Applications
    Applications
    • Blind & Cross Hole FinishingBlind & Cross Hole Finishing (249)
    • Blind Hole FinishingBlind Hole Finishing (348)
    • BoringBoring (2)
    • FacingFacing (2)
    • GroovingGrooving (1)
    • ID FacingID Facing (2)
    • Multiple Direction CuttingMultiple Direction Cutting (12)
    • ProfilingProfiling (1)
    • Slot MillingSlot Milling (5)
    • Slot SideSlot Side (5)
    • Slot Square EndSlot Square End (5)
    • Through & Cross Hole FinishingThrough & Cross Hole Finishing (178)
    • Through Hole FinishingThrough Hole Finishing (272)
    • TurningTurning (2)
    Cutting Diameter
    Cutting Diameter
    • 0.197 in(8)
    • 0.217 in(8)
    • 0.237 in(10)
    • 0.25 in(2)
    • 0.256 in(8)
    • 0.276 in(8)
    • 0.313 in(2)
    • 0.315 in(10)
    • 0.354 in(8)
    • 0.375 in(2)
    • 0.394 in(10)
    • 0.433 in(8)
    • 0.438 in(2)
    • 0.473 in(10)
    • 0.5 in(2)
    • 0.512 in(8)
    • 0.551 in(18)
    • 0.564 in(4)
    • 0.591 in(8)
    • 0.625 in(3)
    • 0.63 in(10)
    • 0.669 in(8)
    • 0.689 in(4)
    • 0.709 in(10)
    • 0.743 in(4)
    • 0.748 in(9)
    • 0.75 in(6)
    • 0.787 in(10)
    • 0.828 in(6)
    • 0.866 in(7)
    • 0.875 in(4)
    • 0.876 in(1)
    • 0.906 in(6)
    • 0.939 in(4)
    • 0.946 in(6)
    • 0.984 in(7)
    • 1.0 in(5)
    • 1.024 in(6)
    • 1.063 in(6)
    • 1.102 in(7)
    • 1.125 in(1)
    • 1.143 in(2)
    • 1.181 in(7)
    • 1.22 in(2)
    • 1.25 in(5)
    • 1.26 in(7)
    • 1.299 in(2)
    • 1.339 in(6)
    • 1.379 in(2)
    • 1.417 in(7)
    • 1.438 in(1)
    • 1.457 in(2)
    • 1.496 in(6)
    • 1.536 in(2)
    • 1.563 in(1)
    • 1.575 in(7)
    • 1.614 in(2)
    • 1.653 in(1)
    • 1.655 in(7)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 5.0 mm(8)
    • 5.5 mm(8)
    • 6.0 mm(10)
    • 6.351 mm(2)
    • 6.5 mm(8)
    • 7.0 mm(8)
    • 7.95 mm(2)
    • 8.0 mm(10)
    • 9.0 mm(8)
    • 9.525 mm(2)
    • 10.0 mm(10)
    • 11.0 mm(8)
    • 11.125 mm(2)
    • 12.0 mm(10)
    • 12.701 mm(2)
    • 13.0 mm(8)
    • 14.0 mm(18)
    • 14.3 mm(4)
    • 15.0 mm(8)
    • 15.875 mm(3)
    • 16.0 mm(10)
    • 17.0 mm(8)
    • 17.475 mm(4)
    • 18.0 mm(10)
    • 18.875 mm(4)
    • 19.0 mm(9)
    • 19.05 mm(6)
    • 20.0 mm(10)
    • 21.0 mm(6)
    • 22.0 mm(7)
    • 22.225 mm(4)
    • 22.25 mm(1)
    • 23.0 mm(6)
    • 23.826 mm(4)
    • 24.0 mm(6)
    • 25.0 mm(7)
    • 25.401 mm(5)
    • 26.0 mm(6)
    • 27.0 mm(6)
    • 28.0 mm(7)
    • 28.576 mm(1)
    • 29.0 mm(2)
    • 30.0 mm(7)
    • 31.0 mm(2)
    • 31.75 mm(5)
    • 32.0 mm(7)
    • 33.0 mm(2)
    • 34.0 mm(6)
    • 35.0 mm(2)
    • 36.0 mm(7)
    • 36.525 mm(1)
    • 37.0 mm(2)
    • 38.0 mm(6)
    • 39.0 mm(2)
    • 39.7 mm(1)
    • 40.0 mm(7)
    • 41.0 mm(2)
    • 41.95 mm(1)
    • 42.0 mm(7)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (227)
    • Lightly Interrupted Cut (359)
    • Smooth Cut (558)
    • Varying Depth of Cut (362)
    Reach
    Reach
    • 0.968 in(1)
    • 1.01 in(1)
    • 1.045 in(1)
    • 1.969 in(1)
    • 2.045 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 24.576 mm(1)
    • 25.625 mm(1)
    • 26.55 mm(1)
    • 50.0 mm(1)
    • 51.95 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (69)
    • 91.0 (8)
    • 92.0 (23)
    • 93.0 (1)
    • 95.0 (4)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • E-BORE Boring Bar (21)
    • Short Taper Reamer Shank (192)
    • Straight-Cylindrical (140)
    • Whistle Notch 2 (3)
    • Whistle Notch 2 Front (12)
    Number of Flutes
    Number of Flutes
    • 2 (4)
    • 3 (1)
    • 4 (64)
    • 6 (178)
    • 8 (88)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (3)
    • 1.0 (60)
    • 2.0 (345)
    • 3.0 (215)
    • 4.0 (150)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.36 in(1)
    • 0.395 in(1)
    • 0.496 in(3)
    • 0.574 in(1)
    • 0.576 in(1)
    • 0.592 in(1)
    • 0.65 in(2)
    • 0.669 in(3)
    • 0.754 in(3)
    • 0.756 in(3)
    • 0.776 in(7)
    • 0.811 in(1)
    • 0.816 in(2)
    • 0.929 in(2)
    • 0.931 in(3)
    • 0.935 in(1)
    • 0.971 in(3)
    • 1.0 in(1)
    • 1.047 in(2)
    • 1.053 in(1)
    • 1.161 in(1)
    • 1.205 in(1)
    • 1.209 in(6)
    • 1.358 in(1)
    • 1.437 in(1)
    • 1.524 in(3)
    • 1.635 in(1)
    • 1.772 in(1)
    • 1.792 in(6)
    • 1.891 in(1)
    • 2.0 in(1)
    • 2.086 in(1)
    • 2.087 in(1)
    • 2.165 in(1)
    • 2.197 in(1)
    • 2.265 in(1)
    • 2.273 in(1)
    • 2.282 in(2)
    • 2.386 in(1)
    • 2.441 in(1)
    • 2.479 in(1)
    • 2.676 in(1)
    • 2.677 in(1)
    • 2.695 in(1)
    • 2.873 in(1)
    • 3.071 in(1)
    • 3.089 in(1)
    • 3.15 in(1)
    • 3.161 in(1)
    • 3.269 in(1)
    • 3.561 in(2)
    • 3.661 in(2)
    • 3.858 in(2)
    • 3.875 in(2)
    • 3.976 in(1)
    • 4.449 in(2)
    • 4.843 in(1)
    • 4.875 in(2)
    • 5.63 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 9.15 mm(1)
    • 10.025 mm(1)
    • 12.601 mm(3)
    • 14.55 mm(1)
    • 14.601 mm(1)
    • 15.025 mm(1)
    • 16.5 mm(2)
    • 17.0 mm(3)
    • 19.151 mm(3)
    • 19.201 mm(3)
    • 19.701 mm(7)
    • 20.6 mm(1)
    • 20.701 mm(2)
    • 23.6 mm(2)
    • 23.651 mm(3)
    • 23.75 mm(1)
    • 24.651 mm(3)
    • 25.401 mm(1)
    • 26.6 mm(2)
    • 26.75 mm(1)
    • 29.5 mm(1)
    • 30.6 mm(1)
    • 30.701 mm(6)
    • 34.5 mm(1)
    • 36.5 mm(1)
    • 38.7 mm(3)
    • 41.5 mm(1)
    • 45.0 mm(1)
    • 45.5 mm(6)
    • 48.0 mm(1)
    • 50.801 mm(1)
    • 52.975 mm(1)
    • 53.0 mm(1)
    • 55.0 mm(1)
    • 55.801 mm(1)
    • 57.5 mm(1)
    • 57.7 mm(1)
    • 57.975 mm(2)
    • 60.6 mm(1)
    • 62.0 mm(1)
    • 62.975 mm(1)
    • 67.976 mm(1)
    • 68.0 mm(1)
    • 68.45 mm(1)
    • 72.976 mm(1)
    • 78.0 mm(1)
    • 78.45 mm(1)
    • 80.0 mm(1)
    • 80.301 mm(1)
    • 83.0 mm(1)
    • 90.45 mm(2)
    • 93.0 mm(2)
    • 98.0 mm(2)
    • 98.426 mm(2)
    • 101.0 mm(1)
    • 113.0 mm(2)
    • 123.0 mm(1)
    • 123.825 mm(2)
    • 143.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(3)
    • 0.001 in(37)
    • 0.002 in(47)
    • 0.004 in(156)
    • 0.007 in(24)
    • 0.008 in(224)
    • 0.015 in(18)
    • 0.016 in(370)
    • 0.02 in(2)
    • 0.031 in(351)
    • 0.047 in(19)
    • 0.063 in(3)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(3)
    • 0.025 mm(37)
    • 0.05 mm(47)
    • 0.1 mm(156)
    • 0.176 mm(24)
    • 0.2 mm(224)
    • 0.375 mm(18)
    • 0.4 mm(370)
    • 0.5 mm(2)
    • 0.8 mm(351)
    • 1.201 mm(19)
    • 1.6 mm(3)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(754)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(754)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • HCK10 (39)
    • HK1500 (32)
    • HK35 (36)
    • HT2 (45)
    • HTX (44)
    • HWK15 (39)
    • K00379 (3)
    • K10M (42)
    • K10P (42)
    • K10U (38)
    • K15U (38)
    • K20K (42)
    • K25M (35)
    • K313 (145)
    • K420 (2)
    • K605 (24)
    • K68 (141)
    • KB1345 (21)
    • KB1610 (131)
    • KB1630 (55)
    • KB5610 (128)
    • KB5625 (48)
    • KB5630 (48)
    • KB9610 (48)
    • KBH10 (45)
    • KBH20 (141)
    • KBHK10 (5)
    • KBHK15 (5)
    • KC250 (90)
    • KC5010 (197)
    • KC5025 (176)
    • KC525M (1)
    • KC5410 (151)
    • KC6005 (76)
    • KC6105 (17)
    • KC6305 (98)
    • KC710 (91)
    • KC720 (135)
    • KC725M (2)
    • KC730 (184)
    • KC7310 (89)
    • KC732 (135)
    • KC8050 (135)
    • KC810 (135)
    • KC850 (155)
    • KC9010 (128)
    • KC9025 (135)
    • KC910 (135)
    • KC9105 (135)
    • KC9110 (135)
    • KC9120 (128)
    • KC9125 (135)
    • KC9225 (135)
    • KC9240 (135)
    • KC9240NEW (135)
    • KC9315 (135)
    • KC9320 (135)
    • KC9325 (135)
    • KC935 (137)
    • KC950 (128)
    • KC990 (128)
    • KCD25 (135)
    • KCK05 (139)
    • KCK05B (38)
    • KCK15 (145)
    • KCK15B (141)
    • KCK20 (151)
    • KCK20B (142)
    • KCM15 (140)
    • KCM15B (139)
    • KCM25 (147)
    • KCM25B (143)
    • KCM25S (37)
    • KCM35 (46)
    • KCM35B (4)
    • KCP05 (138)
    • KCP05B (3)
    • KCP10 (144)
    • KCP10B (146)
    • KCP20S (37)
    • KCP25 (158)
    • KCP25B (156)
    • KCP25C (180)
    • KCP30 (136)
    • KCP30B (10)
    • KCPK05 (90)
    • KCPK30 (2)
    • KCS10 (150)
    • KCS10B (150)
    • KCS25S (37)
    • KCU05 (72)
    • KCU05A (48)
    • KCU10 (176)
    • KCU10B (199)
    • KCU25 (158)
    • KCU25B (137)
    • KCU45 (7)
    • KD050 (127)
    • KD081 (40)
    • KD100 (91)
    • KD105 (89)
    • KD120 (89)
    • KD1400 (143)
    • KD1405 (90)
    • KD1415 (49)
    • KD1425 (142)
    • KN10S (37)
    • KT125 (90)
    • KT150 (90)
    • KT175 (127)
    • KT315 (158)
    • KT325 (45)
    • KT6215 (1)
    • KT6225 (1)
    • KT6315 (2)
    • KTP10 (132)
    • KTP25S (38)
    • KU10 (128)
    • KU10T (135)
    • KU30T (135)
    • NL300 (7)
    • NL920 (7)
    • PB100 (29)
    • PB170 (36)
    • PB250 (36)
    • PB300 (29)
    • PD100 (39)
    • PD50 (36)
    • SP0PW3 (7)
    • SP4019 (7)
    • SPM5F2 (2)
    • SPMQMA (10)
    • SPN3W1 (3)
    • THM (39)
    • THM-X (39)
    • TN1000 (29)
    • TN10P (39)
    • TN10U (39)
    • TN15M (39)
    • TN15U (32)
    • TN2000 (39)
    • TN20K (39)
    • TN20P (39)
    • TN30M (39)
    • TN4000 (32)
    • TN5015 (39)
    • TN5020 (39)
    • TN5105 (39)
    • TN5120 (39)
    • TN6010 (10)
    • TN6025 (3)
    • TN7005 (3)
    • TN7010 (39)
    • TN7015 (39)
    • TN7025 (39)
    • TN7035 (39)
    • TN7105 (39)
    • TN7110 (39)
    • TN7115 (39)
    • TN7125 (39)
    • TN7135 (39)
    • TN8025 (39)
    • TTI15 (32)
    • TTM (3)
    • TTR (39)
    • TTS (32)
    • TTX (3)
    • W00342 (7)
    • WBH10C (32)
    • WBH10P (32)
    • WBH10U (32)
    • WBH20P (10)
    • WBH25P (32)
    • WBH30P (3)
    • WBK45U (10)
    • WDN00U (32)
    • WDN25U (32)
    • WK05CT (39)
    • WK15CT (39)
    • WK20CT (39)
    • WM15CT (39)
    • WM25CT (39)
    • WP15CT (39)
    • WP20TT (29)
    • WP25CT (39)
    • WP35CT (10)
    • WS10PT (39)
    • WS25PT (32)
    • WU05PT (39)
    • WU10HT (39)
    • WU10PR (4)
    • WU10PT (39)
    • WU20HT (29)
    • WU25PT (39)
    • YY3A00 (1)
    Hand Of Tool
    Hand Of Tool
    • R (368)
    Wiper Insert
    Wiper Insert
    • N (680)
    • Y (31)
    Helix Hand
    Helix Hand
    • L (118)
    • N (187)
    • R (25)
    F Dimension
    F Dimension
    • 0.151 mm(1)
    • 2.825 mm(2)
    • 3.825 mm(1)
    • 4.75 mm(1)
    • 4.775 mm(3)
    • 5.75 mm(2)
    • 5.775 mm(1)
    • 6.75 mm(2)
    • 6.775 mm(2)
    • 7.325 mm(1)
    • 7.75 mm(1)
    • 7.775 mm(2)
    • 9.775 mm(1)
    • 12.275 mm(1)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.006 in(1)
    • 0.111 in(2)
    • 0.151 in(1)
    • 0.187 in(1)
    • 0.188 in(3)
    • 0.226 in(2)
    • 0.227 in(1)
    • 0.266 in(2)
    • 0.267 in(2)
    • 0.289 in(1)
    • 0.305 in(1)
    • 0.306 in(2)
    • 0.385 in(1)
    • 0.483 in(1)
    F Dimension MinkomuF Dimension Max
    Lead in Length
    Lead in Length
    • 0.2 mm(45)
    • 0.301 mm(6)
    • 0.4 mm(26)
    • 0.5 mm(110)
    • 0.601 mm(12)
    • 0.701 mm(5)
    • 0.75 mm(6)
    • 0.8 mm(3)
    • 0.9 mm(4)
    • 0.951 mm(10)
    • 1.1 mm(95)
    • 1.151 mm(8)
    Lead in Length MinkomuLead in Length Max
    Lead In Length
    Lead In Length
    • 0.0 in(51)
    • 0.001 in(165)
    • 0.002 in(113)
    • 0.038 in(1)
    Lead In Length MinkomuLead In Length Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 2.0 mm(1)
    • 4.0 mm(1)
    • 6.0 mm(4)
    • 8.0 mm(2)
    • 8.5 mm(2)
    • 10.0 mm(4)
    • 11.0 mm(2)
    • 12.0 mm(3)
    • 13.5 mm(2)
    • 14.0 mm(4)
    • 15.0 mm(1)
    • 16.0 mm(4)
    • 19.0 mm(1)
    • 19.5 mm(1)
    • 20.0 mm(1)
    • 22.0 mm(1)
    • 22.5 mm(1)
    • 24.5 mm(1)
    • 25.0 mm(3)
    • 25.5 mm(2)
    • 29.0 mm(2)
    • 29.5 mm(2)
    • 33.5 mm(1)
    • 34.0 mm(2)
    • 36.0 mm(2)
    • 40.0 mm(1)
    • 40.5 mm(1)
    • 42.0 mm(1)
    • 43.0 mm(2)
    • 45.5 mm(1)
    • 47.0 mm(1)
    • 49.0 mm(1)
    • 50.0 mm(1)
    • 52.0 mm(2)
    • 53.0 mm(1)
    • 56.5 mm(1)
    • 60.0 mm(2)
    • 61.0 mm(1)
    • 65.0 mm(3)
    • 68.0 mm(1)
    • 76.0 mm(1)
    • 82.0 mm(1)
    • 97.0 mm(1)
    • 100.0 mm(2)
    • 103.5 mm(1)
    • 110.0 mm(1)
    • 125.0 mm(1)
    • 138.0 mm(3)
    • 200.0 mm(2)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.079 in(1)
    • 0.157 in(1)
    • 0.237 in(4)
    • 0.315 in(2)
    • 0.335 in(2)
    • 0.394 in(4)
    • 0.433 in(2)
    • 0.473 in(3)
    • 0.531 in(2)
    • 0.551 in(4)
    • 0.591 in(1)
    • 0.63 in(4)
    • 0.748 in(1)
    • 0.768 in(1)
    • 0.787 in(1)
    • 0.866 in(1)
    • 0.886 in(1)
    • 0.965 in(1)
    • 0.984 in(3)
    • 1.004 in(2)
    • 1.143 in(2)
    • 1.161 in(2)
    • 1.319 in(1)
    • 1.339 in(2)
    • 1.417 in(2)
    • 1.575 in(1)
    • 1.594 in(1)
    • 1.655 in(1)
    • 1.693 in(2)
    • 1.792 in(1)
    • 1.85 in(1)
    • 1.929 in(1)
    • 1.969 in(1)
    • 2.047 in(2)
    • 2.087 in(1)
    • 2.224 in(1)
    • 2.362 in(2)
    • 2.402 in(1)
    • 2.559 in(3)
    • 2.677 in(1)
    • 2.992 in(1)
    • 3.228 in(1)
    • 3.819 in(1)
    • 3.938 in(2)
    • 4.075 in(1)
    • 4.331 in(1)
    • 4.921 in(1)
    • 5.433 in(3)
    • 7.875 in(2)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.276 in(1)
    • 0.315 in(2)
    • 0.354 in(1)
    • 0.374 in(1)
    • 0.394 in(2)
    • 0.453 in(1)
    • 0.473 in(5)
    • 0.551 in(4)
    • 0.572 in(1)
    • 0.63 in(4)
    • 0.65 in(1)
    • 0.669 in(1)
    • 0.768 in(1)
    • 0.787 in(4)
    • 0.886 in(1)
    • 0.906 in(1)
    • 0.984 in(1)
    • 1.004 in(1)
    • 1.024 in(1)
    • 1.181 in(2)
    • 1.319 in(1)
    • 1.457 in(2)
    • 1.614 in(1)
    • 1.713 in(1)
    • 1.732 in(1)
    • 2.087 in(1)
    • 2.126 in(1)
    • 2.283 in(1)
    • 2.559 in(1)
    • 2.598 in(2)
    • 3.031 in(1)
    • 3.269 in(1)
    • 3.938 in(1)
    • 4.016 in(1)
    • 4.055 in(1)
    • 5.118 in(1)
    • 5.984 in(1)
    • 8.071 in(2)
    • 40.158 in(2)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 7.0 mm(1)
    • 8.0 mm(2)
    • 9.0 mm(1)
    • 9.5 mm(1)
    • 10.0 mm(2)
    • 11.5 mm(1)
    • 12.0 mm(5)
    • 14.0 mm(4)
    • 14.5 mm(1)
    • 16.0 mm(4)
    • 16.5 mm(1)
    • 17.0 mm(1)
    • 19.5 mm(1)
    • 20.0 mm(4)
    • 22.5 mm(1)
    • 23.0 mm(1)
    • 25.0 mm(1)
    • 25.5 mm(1)
    • 26.0 mm(1)
    • 30.0 mm(2)
    • 33.5 mm(1)
    • 37.0 mm(2)
    • 41.0 mm(1)
    • 43.5 mm(1)
    • 44.0 mm(1)
    • 53.0 mm(1)
    • 54.0 mm(1)
    • 58.0 mm(1)
    • 65.0 mm(1)
    • 66.0 mm(2)
    • 77.0 mm(1)
    • 83.0 mm(1)
    • 100.0 mm(1)
    • 102.0 mm(1)
    • 103.0 mm(1)