Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Zajistěte si tyto akce, než bude pozdě! Nakupujte nyní.

Speciálně vyvinuté pro nerezové oceli

Zcela nové karbidové vrtáky řady B21_SGL jsou speciálně učené pro nerezové oceli, ale dosahují vysoké výkonnosti a dlouhé životnosti i při vrtání běžných ocelí a žáruvzdorných slitin.

Díky kombinací nejlepších technologií Kennametal jako je zcela nová geometrie špičky SGL, patentovaná drážka a nejlepší povlak ve své třídě, jsou vrtáky B21*SGL nejvíce produktivním nástrojem pro velké série.

Vlastnosti a výhody

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (468)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(468)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(468)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(468)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(468)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(468)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(468)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(468)
    • M Stainless Steel (468)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(468)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(468)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(468)
    • S High-Temp Alloys (468)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(468)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(468)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(468)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(468)
    Applications
    Applications
    • DrillingDrilling (468)
    • Stacked Plates DrillingStacked Plates Drilling (468)
    Cutting Diameter
    Cutting Diameter
    • 2.5 mm(1)
    • 3.0 mm(3)
    • 3.048 mm(2)
    • 3.1 mm(2)
    • 3.175 mm(3)
    • 3.2 mm(3)
    • 3.264 mm(2)
    • 3.3 mm(3)
    • 3.4 mm(2)
    • 3.455 mm(3)
    • 3.5 mm(3)
    • 3.571 mm(2)
    • 3.6 mm(2)
    • 3.658 mm(2)
    • 3.7 mm(3)
    • 3.734 mm(1)
    • 3.8 mm(3)
    • 3.861 mm(1)
    • 3.9 mm(2)
    • 3.97 mm(6)
    • 4.0 mm(3)
    • 4.039 mm(2)
    • 4.0894 mm(1)
    • 4.1 mm(3)
    • 4.1554 mm(1)
    • 4.156 mm(1)
    • 4.2 mm(3)
    • 4.2164 mm(1)
    • 4.217 mm(1)
    • 4.3 mm(3)
    • 4.3656 mm(3)
    • 4.4 mm(2)
    • 4.5 mm(3)
    • 4.5796 mm(1)
    • 4.6 mm(2)
    • 4.6228 mm(1)
    • 4.623 mm(1)
    • 4.7 mm(3)
    • 4.7625 mm(3)
    • 4.763 mm(3)
    • 4.8 mm(3)
    • 4.8514 mm(1)
    • 4.852 mm(2)
    • 4.9 mm(2)
    • 5.0 mm(3)
    • 5.1 mm(3)
    • 5.1054 mm(1)
    • 5.106 mm(2)
    • 5.1587 mm(1)
    • 5.1594 mm(2)
    • 5.2 mm(3)
    • 5.26 mm(1)
    • 5.2603 mm(1)
    • 5.3 mm(2)
    • 5.4 mm(2)
    • 5.41 mm(1)
    • 5.4102 mm(1)
    • 5.5 mm(3)
    • 5.5575 mm(3)
    • 5.558 mm(3)
    • 5.6 mm(2)
    • 5.6159 mm(1)
    • 5.616 mm(1)
    • 5.7 mm(3)
    • 5.8 mm(3)
    • 5.9 mm(2)
    • 5.954 mm(2)
    • 6.0 mm(3)
    • 6.1 mm(2)
    • 6.2 mm(2)
    • 6.3 mm(2)
    • 6.35 mm(6)
    • 6.4 mm(2)
    • 6.5 mm(3)
    • 6.5278 mm(2)
    • 6.528 mm(2)
    • 6.6 mm(1)
    • 6.6294 mm(1)
    • 6.63 mm(2)
    • 6.7 mm(2)
    • 6.7285 mm(1)
    • 6.746 mm(3)
    • 6.7462 mm(3)
    • 6.8 mm(3)
    • 6.9 mm(2)
    • 6.9088 mm(1)
    • 6.909 mm(1)
    • 7.0 mm(3)
    • 7.0358 mm(1)
    • 7.036 mm(1)
    • 7.1 mm(2)
    • 7.145 mm(6)
    • 7.2 mm(1)
    • 7.3 mm(1)
    • 7.4 mm(2)
    • 7.5 mm(3)
    • 7.5406 mm(2)
    • 7.541 mm(1)
    • 7.5413 mm(3)
    • 7.6 mm(1)
    • 7.7 mm(1)
    • 7.8 mm(3)
    • 7.9 mm(1)
    • 7.9375 mm(6)
    • 8.0 mm(3)
    • 8.1 mm(2)
    • 8.2 mm(2)
    • 8.2042 mm(1)
    • 8.3337 mm(3)
    • 8.3344 mm(3)
    • 8.4 mm(3)
    • 8.4328 mm(1)
    • 8.433 mm(2)
    • 8.5 mm(3)
    • 8.6 mm(2)
    • 8.6106 mm(1)
    • 8.611 mm(1)
    • 8.7 mm(2)
    • 8.7325 mm(3)
    • 8.733 mm(3)
    • 8.8 mm(3)
    • 8.9 mm(1)
    • 9.0 mm(3)
    • 9.093 mm(1)
    • 9.1 mm(1)
    • 9.1288 mm(3)
    • 9.129 mm(3)
    • 9.2 mm(1)
    • 9.3 mm(1)
    • 9.347 mm(1)
    • 9.3472 mm(1)
    • 9.4 mm(1)
    • 9.5 mm(3)
    • 9.525 mm(6)
    • 9.6 mm(1)
    • 9.7 mm(2)
    • 9.7028 mm(1)
    • 9.8 mm(2)
    • 9.9 mm(1)
    • 9.921 mm(3)
    • 9.9212 mm(3)
    • 10.0 mm(3)
    • 10.1 mm(1)
    • 10.2 mm(3)
    • 10.3 mm(1)
    • 10.32 mm(6)
    • 10.4 mm(2)
    • 10.5 mm(3)
    • 10.7 mm(1)
    • 10.7156 mm(3)
    • 10.7163 mm(3)
    • 10.8 mm(2)
    • 11.0 mm(3)
    • 11.0261 mm(1)
    • 11.1 mm(1)
    • 11.1125 mm(3)
    • 11.113 mm(3)
    • 11.2 mm(2)
    • 11.4 mm(1)
    • 11.5 mm(2)
    • 11.5087 mm(3)
    • 11.5094 mm(3)
    • 11.7 mm(1)
    • 11.8 mm(2)
    • 11.9075 mm(3)
    • 11.908 mm(3)
    • 12.0 mm(3)
    • 12.1 mm(1)
    • 12.2 mm(2)
    • 12.3 mm(1)
    • 12.3038 mm(3)
    • 12.304 mm(3)
    • 12.5 mm(3)
    • 12.7 mm(6)
    • 12.8 mm(2)
    • 12.9 mm(1)
    • 13.0 mm(3)
    • 13.0785 mm(1)
    • 13.096 mm(1)
    • 13.0962 mm(1)
    • 13.1 mm(1)
    • 13.2 mm(1)
    • 13.3 mm(1)
    • 13.495 mm(1)
    • 13.5 mm(3)
    • 13.8 mm(1)
    • 13.8906 mm(1)
    • 13.8963 mm(1)
    • 14.0 mm(3)
    • 14.1 mm(2)
    • 14.2 mm(1)
    • 14.2875 mm(3)
    • 14.288 mm(3)
    • 14.3 mm(1)
    • 14.4 mm(1)
    • 14.5 mm(2)
    • 14.6 mm(1)
    • 14.666 mm(1)
    • 14.8 mm(1)
    • 15.0 mm(2)
    • 15.1 mm(1)
    • 15.3 mm(1)
    • 15.5 mm(2)
    • 15.7 mm(1)
    • 15.875 mm(5)
    • 16.0 mm(2)
    • 16.1 mm(1)
    • 16.129 mm(1)
    • 16.5 mm(2)
    • 16.67 mm(3)
    • 17.0 mm(2)
    • 17.4625 mm(3)
    • 17.463 mm(2)
    • 17.5 mm(2)
    • 17.7 mm(1)
    • 18.0 mm(2)
    • 18.5 mm(2)
    • 19.0 mm(1)
    • 19.05 mm(4)
    • 19.159 mm(1)
    • 19.3 mm(1)
    • 19.4462 mm(1)
    • 19.5 mm(1)
    • 20.0 mm(1)
    • 20.5 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 11.0 mm(1)
    • 14.0 mm(12)
    • 17.0 mm(12)
    • 17.4 mm(1)
    • 20.0 mm(19)
    • 21.4 mm(1)
    • 22.6 mm(3)
    • 23.0 mm(14)
    • 24.0 mm(12)
    • 25.9 mm(5)
    • 28.3 mm(5)
    • 28.6 mm(4)
    • 29.0 mm(25)
    • 31.75 mm(1)
    • 33.0 mm(10)
    • 34.7 mm(4)
    • 34.9 mm(5)
    • 35.0 mm(40)
    • 38.1 mm(5)
    • 39.6 mm(4)
    • 40.0 mm(13)
    • 40.3 mm(9)
    • 41.0 mm(10)
    • 43.0 mm(39)
    • 45.0 mm(8)
    • 46.5 mm(1)
    • 48.0 mm(11)
    • 48.7 mm(8)
    • 49.0 mm(27)
    • 50.8 mm(2)
    • 51.0 mm(7)
    • 53.0 mm(1)
    • 53.1 mm(6)
    • 55.0 mm(4)
    • 55.5 mm(1)
    • 55.6 mm(4)
    • 56.0 mm(20)
    • 57.0 mm(6)
    • 60.0 mm(21)
    • 63.0 mm(14)
    • 63.5 mm(4)
    • 64.0 mm(6)
    • 64.5 mm(2)
    • 71.0 mm(8)
    • 73.0 mm(2)
    • 74.5 mm(1)
    • 76.2 mm(4)
    • 77.0 mm(4)
    • 78.0 mm(1)
    • 80.0 mm(11)
    • 85.0 mm(1)
    • 88.9 mm(4)
    • 96.0 mm(10)
    • 101.6 mm(4)
    • 112.0 mm(6)
    • 114.3 mm(1)
    • 128.0 mm(2)
    • 139.7 mm(1)
    • 152.4 mm(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 16.0 mm(1)
    • 20.0 mm(12)
    • 23.0 mm(1)
    • 24.0 mm(12)
    • 27.0 mm(1)
    • 28.0 mm(33)
    • 29.0 mm(3)
    • 34.0 mm(17)
    • 35.0 mm(4)
    • 36.0 mm(17)
    • 37.084 mm(1)
    • 38.0 mm(5)
    • 40.0 mm(10)
    • 41.0 mm(8)
    • 43.0 mm(5)
    • 44.0 mm(21)
    • 44.958 mm(1)
    • 46.0 mm(4)
    • 47.0 mm(19)
    • 49.0 mm(10)
    • 50.0 mm(9)
    • 51.0 mm(4)
    • 53.0 mm(29)
    • 54.0 mm(4)
    • 55.0 mm(13)
    • 56.0 mm(11)
    • 58.928 mm(2)
    • 59.0 mm(1)
    • 60.0 mm(17)
    • 61.0 mm(27)
    • 64.0 mm(1)
    • 65.0 mm(8)
    • 66.0 mm(6)
    • 67.0 mm(6)
    • 70.0 mm(4)
    • 71.0 mm(20)
    • 72.0 mm(1)
    • 72.898 mm(4)
    • 73.0 mm(7)
    • 74.0 mm(6)
    • 76.0 mm(5)
    • 77.0 mm(17)
    • 79.0 mm(4)
    • 82.0 mm(2)
    • 83.0 mm(14)
    • 87.884 mm(4)
    • 92.0 mm(13)
    • 93.0 mm(8)
    • 95.0 mm(1)
    • 100.0 mm(1)
    • 101.0 mm(4)
    • 102.108 mm(4)
    • 110.0 mm(10)
    • 112.0 mm(1)
    • 116.078 mm(4)
    • 128.0 mm(6)
    • 130.048 mm(1)
    • 146.0 mm(2)
    • 159.004 mm(1)
    • 172.974 mm(1)
    Reach MinkomuReach Max
    Over All Length [L]
    Over All Length [L]
    • 50.0 mm(1)
    • 62.0 mm(12)
    • 63.0 mm(1)
    • 66.0 mm(46)
    • 68.0 mm(3)
    • 73.0 mm(5)
    • 74.0 mm(21)
    • 76.2 mm(1)
    • 78.0 mm(10)
    • 79.0 mm(25)
    • 82.0 mm(26)
    • 84.582 mm(1)
    • 87.0 mm(10)
    • 89.0 mm(23)
    • 91.0 mm(38)
    • 94.0 mm(11)
    • 96.0 mm(4)
    • 98.552 mm(2)
    • 102.0 mm(17)
    • 103.0 mm(35)
    • 105.0 mm(6)
    • 107.0 mm(10)
    • 111.0 mm(6)
    • 113.0 mm(6)
    • 114.554 mm(4)
    • 115.0 mm(9)
    • 118.0 mm(24)
    • 123.0 mm(8)
    • 124.0 mm(21)
    • 129.0 mm(1)
    • 131.0 mm(4)
    • 131.572 mm(4)
    • 133.0 mm(16)
    • 135.0 mm(11)
    • 143.0 mm(10)
    • 147.574 mm(4)
    • 148.0 mm(1)
    • 153.0 mm(5)
    • 158.0 mm(10)
    • 164.592 mm(4)
    • 167.0 mm(1)
    • 176.0 mm(6)
    • 178.562 mm(1)
    • 197.0 mm(2)
    • 210.566 mm(1)
    • 226.568 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Coating
    Coating
    • AlTiN (368)
    • Uncoated (100)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 3.0 mm(1)
    • 4.7625 mm(11)
    • 6.0 mm(126)
    • 6.35 mm(12)
    • 7.9375 mm(18)
    • 8.0 mm(61)
    • 9.525 mm(16)
    • 10.0 mm(57)
    • 11.1125 mm(14)
    • 12.0 mm(43)
    • 12.7 mm(12)
    • 14.0 mm(32)
    • 14.2875 mm(6)
    • 15.875 mm(3)
    • 16.0 mm(24)
    • 17.4625 mm(4)
    • 18.0 mm(15)
    • 19.05 mm(3)
    • 20.0 mm(9)
    • 20.6375 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Vrtáky SGL • Vnitřní chlazení • Nerezové oceli
    KenDrill™ SGL • 3 x D • Internal Coolant • Straight Shank • Metric
    (124)

    KenDrill™ SGL • 3 x D • Internal Coolant • Straight Shank • Metric

    B210_SGL (~3 x D) • B211_SGL (~5 x D) • B212_SGL (~8 x D) • KCMS15 • A-Shank • SGL Drills
    (72)

    B210_SGL (~3 x D) • B211_SGL (~5 x D) • B212_SGL (~8 x D) • KCMS15 • A-Shank • SGL Drills

    KenDrill™ SGL • 5 x D • Internal Coolant • Straight Shank • Inch
    (47)

    KenDrill™ SGL • 5 x D • Internal Coolant • Straight Shank • Inch

    KenDrill™ SGL • 5 x D • Internal Coolant • Straight Shank • Metric
    (172)

    KenDrill™ SGL • 5 x D • Internal Coolant • Straight Shank • Metric

    KenDrill™ SGL • 3 x D • Internal Coolant • Straight Shank • Inch
    (30)

    KenDrill™ SGL • 3 x D • Internal Coolant • Straight Shank • Inch

    KenDrill™ SGL • 8 x D • Internal Coolant • Straight Shank • Inch
    (23)

    KenDrill™ SGL • 8 x D • Internal Coolant • Straight Shank • Inch

    Máte na nás otázky?

    Náš kvalifikovaný personál je připraven pomoci.

    Kontaktujte Prodejce

    V případě technických dotazů prosím kontaktujte centrum Technické podpory

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Select the project where you want to add product(s) komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    Product(s) successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk