Zjistěte více o tom, jak modernizujeme naši rodinu vrtáků na hluboké otvory z tvrdokovu s novým vrtákem KenDrill Deep HPR.

Nový KenDrill Deep HPR výrazně vylepšuje naši stávající řadu nástrojů pro hluboké vrtání ze slinutého karbidu díky možnosti vrtání do oceli a železa. KenDrill Deep HPR, vrták pro hluboké otvory určený pro konkrétní materiál, je skladem a je k dispozici v široké škále délek a průměrů.

  • Osvědčený výkon s naší geometrií vrtáků HPR s naší tepelně a otěruvzdornou třídou KCK10A.
  • Vysoká produktivita s rychlostí až 4× vyšší než u běžných vrtáků.
  • Delší životnost nástroje v oceli a železu ve srovnání s konkurenčními výrobky.
  • Úspora z hlediska celkových nákladů díky vyšší rychlosti odebírání kovů.

Pokud jste někdy používali náš vrták HPR s krátkým vrtáním do oceli a železa, díky novému hrotu, povlaku, konstrukci jádra a zadní části si zamilujete naše nové řešení pro hluboké vrtání.

Vybrat filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (241)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (241)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (241)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (241)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (241)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (241)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (241)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (241)
  • K Cast Iron (241)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (241)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (241)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (241)
Applications
Applications
  • Cross Hole Drilling Cross Hole Drilling (241)
  • Drilling Drilling (241)
  • Inclined Exit Drilling Inclined Exit Drilling (241)
  • Stacked Plates Drilling Stacked Plates Drilling (241)
Cutting Diameter
Cutting Diameter
  • 0.094 in (4)
  • 0.095 in (1)
  • 0.098 in (6)
  • 0.103 in (2)
  • 0.105 in (1)
  • 0.106 in (1)
  • 0.109 in (2)
  • 0.11 in (1)
  • 0.111 in (1)
  • 0.119 in (5)
  • 0.124 in (1)
  • 0.125 in (5)
  • 0.126 in (1)
  • 0.13 in (1)
  • 0.138 in (5)
  • 0.142 in (1)
  • 0.143 in (1)
  • 0.146 in (1)
  • 0.152 in (1)
  • 0.156 in (4)
  • 0.157 in (5)
  • 0.165 in (1)
  • 0.169 in (1)
  • 0.177 in (4)
  • 0.182 in (2)
  • 0.188 in (4)
  • 0.189 in (1)
  • 0.197 in (5)
  • 0.199 in (1)
  • 0.201 in (1)
  • 0.206 in (1)
  • 0.208 in (2)
  • 0.213 in (2)
  • 0.217 in (5)
  • 0.219 in (3)
  • 0.224 in (1)
  • 0.228 in (3)
  • 0.232 in (1)
  • 0.237 in (5)
  • 0.244 in (2)
  • 0.25 in (5)
  • 0.256 in (5)
  • 0.257 in (2)
  • 0.266 in (3)
  • 0.268 in (3)
  • 0.272 in (2)
  • 0.276 in (5)
  • 0.281 in (3)
  • 0.284 in (1)
  • 0.295 in (4)
  • 0.297 in (2)
  • 0.303 in (1)
  • 0.313 in (4)
  • 0.315 in (5)
  • 0.323 in (1)
  • 0.328 in (3)
  • 0.332 in (1)
  • 0.335 in (5)
  • 0.343 in (1)
  • 0.345 in (4)
  • 0.354 in (5)
  • 0.358 in (2)
  • 0.362 in (1)
  • 0.374 in (2)
  • 0.375 in (4)
  • 0.384 in (2)
  • 0.394 in (5)
  • 0.402 in (5)
  • 0.408 in (1)
  • 0.414 in (4)
  • 0.422 in (3)
  • 0.425 in (1)
  • 0.433 in (5)
  • 0.453 in (4)
  • 0.465 in (2)
  • 0.473 in (4)
  • 0.492 in (4)
  • 0.5 in (4)
  • 0.512 in (4)
  • 0.516 in (1)
  • 0.531 in (4)
  • 0.551 in (4)
  • 0.564 in (2)
  • 0.572 in (3)
  • 0.591 in (4)
  • 0.602 in (1)
  • 0.61 in (1)
  • 0.625 in (1)
  • 0.63 in (3)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 2.375 mm (4)
  • 2.401 mm (1)
  • 2.5 mm (6)
  • 2.6 mm (2)
  • 2.651 mm (1)
  • 2.7 mm (1)
  • 2.776 mm (2)
  • 2.801 mm (1)
  • 2.825 mm (1)
  • 3.0 mm (5)
  • 3.151 mm (1)
  • 3.176 mm (5)
  • 3.2 mm (1)
  • 3.301 mm (1)
  • 3.5 mm (5)
  • 3.575 mm (1)
  • 3.6 mm (1)
  • 3.7 mm (1)
  • 3.85 mm (1)
  • 3.975 mm (4)
  • 4.0 mm (5)
  • 4.2 mm (1)
  • 4.3 mm (1)
  • 4.5 mm (4)
  • 4.625 mm (2)
  • 4.775 mm (4)
  • 4.801 mm (1)
  • 5.0 mm (5)
  • 5.051 mm (1)
  • 5.101 mm (1)
  • 5.2 mm (1)
  • 5.25 mm (2)
  • 5.4 mm (2)
  • 5.5 mm (5)
  • 5.551 mm (3)
  • 5.7 mm (1)
  • 5.801 mm (3)
  • 5.9 mm (1)
  • 6.0 mm (5)
  • 6.2 mm (2)
  • 6.351 mm (5)
  • 6.5 mm (5)
  • 6.525 mm (2)
  • 6.75 mm (3)
  • 6.801 mm (3)
  • 6.9 mm (2)
  • 7.0 mm (5)
  • 7.15 mm (3)
  • 7.2 mm (1)
  • 7.5 mm (4)
  • 7.551 mm (2)
  • 7.7 mm (1)
  • 7.95 mm (4)
  • 8.0 mm (5)
  • 8.201 mm (1)
  • 8.326 mm (3)
  • 8.425 mm (1)
  • 8.5 mm (5)
  • 8.701 mm (1)
  • 8.725 mm (4)
  • 9.0 mm (5)
  • 9.1 mm (2)
  • 9.201 mm (1)
  • 9.5 mm (2)
  • 9.525 mm (4)
  • 9.75 mm (2)
  • 10.0 mm (5)
  • 10.201 mm (5)
  • 10.326 mm (1)
  • 10.5 mm (4)
  • 10.726 mm (3)
  • 10.8 mm (1)
  • 11.0 mm (5)
  • 11.5 mm (4)
  • 11.8 mm (2)
  • 12.0 mm (4)
  • 12.5 mm (4)
  • 12.701 mm (4)
  • 13.0 mm (4)
  • 13.101 mm (1)
  • 13.5 mm (4)
  • 14.0 mm (4)
  • 14.3 mm (2)
  • 14.5 mm (3)
  • 15.0 mm (4)
  • 15.3 mm (1)
  • 15.5 mm (1)
  • 15.875 mm (1)
  • 16.0 mm (3)
Cutting Diameter Min komu Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 44.0 mm (3)
  • 45.0 mm (4)
  • 56.0 mm (4)
  • 58.0 mm (2)
  • 59.0 mm (3)
  • 60.0 mm (4)
  • 67.0 mm (1)
  • 69.0 mm (1)
  • 70.0 mm (1)
  • 74.0 mm (3)
  • 75.0 mm (6)
  • 77.0 mm (1)
  • 79.0 mm (3)
  • 80.0 mm (1)
  • 81.0 mm (1)
  • 83.0 mm (1)
  • 87.0 mm (1)
  • 88.0 mm (1)
  • 89.0 mm (6)
  • 90.0 mm (3)
  • 94.0 mm (1)
  • 97.0 mm (1)
  • 98.0 mm (1)
  • 99.0 mm (1)
  • 100.0 mm (2)
  • 103.0 mm (1)
  • 104.0 mm (4)
  • 105.0 mm (2)
  • 106.0 mm (2)
  • 112.0 mm (1)
  • 114.0 mm (1)
  • 115.0 mm (1)
  • 116.0 mm (1)
  • 117.0 mm (2)
  • 118.0 mm (2)
  • 119.0 mm (3)
  • 120.0 mm (5)
  • 125.0 mm (1)
  • 133.0 mm (1)
  • 134.0 mm (4)
  • 135.0 mm (1)
  • 136.0 mm (1)
  • 137.0 mm (3)
  • 138.0 mm (3)
  • 139.0 mm (2)
  • 140.0 mm (1)
  • 142.0 mm (1)
  • 144.0 mm (1)
  • 146.0 mm (1)
  • 147.0 mm (2)
  • 148.0 mm (2)
  • 149.0 mm (4)
  • 150.0 mm (3)
  • 154.0 mm (2)
  • 157.0 mm (2)
  • 159.0 mm (2)
  • 160.0 mm (2)
  • 163.0 mm (1)
  • 164.0 mm (2)
  • 165.0 mm (2)
  • 167.0 mm (1)
  • 169.0 mm (1)
  • 171.0 mm (1)
  • 172.0 mm (1)
  • 175.0 mm (3)
  • 176.0 mm (1)
  • 177.0 mm (1)
  • 178.0 mm (2)
  • 179.0 mm (1)
  • 180.0 mm (3)
  • 187.0 mm (1)
  • 194.0 mm (4)
  • 195.0 mm (2)
  • 197.0 mm (2)
  • 198.0 mm (1)
  • 199.0 mm (1)
  • 200.0 mm (3)
  • 202.0 mm (1)
  • 206.0 mm (1)
  • 209.0 mm (1)
  • 210.0 mm (2)
  • 214.0 mm (1)
  • 217.0 mm (1)
  • 219.0 mm (2)
  • 220.0 mm (1)
  • 221.0 mm (1)
  • 224.0 mm (2)
  • 225.0 mm (2)
  • 227.0 mm (1)
  • 228.0 mm (1)
  • 235.0 mm (1)
  • 237.0 mm (1)
  • 238.0 mm (1)
  • 239.0 mm (2)
  • 240.0 mm (5)
  • 250.0 mm (1)
  • 257.0 mm (1)
  • 258.0 mm (1)
  • 259.0 mm (1)
  • 260.0 mm (1)
  • 262.0 mm (1)
  • 263.0 mm (1)
  • 264.0 mm (1)
  • 265.0 mm (1)
  • 267.0 mm (1)
  • 269.0 mm (1)
  • 270.0 mm (1)
  • 273.0 mm (1)
  • 274.0 mm (1)
  • 275.0 mm (1)
  • 277.0 mm (1)
  • 280.0 mm (2)
  • 292.0 mm (1)
  • 294.0 mm (1)
  • 297.0 mm (2)
  • 300.0 mm (3)
  • 307.0 mm (1)
  • 316.0 mm (1)
  • 317.0 mm (1)
  • 318.0 mm (1)
  • 319.0 mm (1)
  • 320.0 mm (2)
  • 322.0 mm (2)
  • 325.0 mm (1)
  • 326.0 mm (1)
  • 330.0 mm (1)
  • 344.0 mm (1)
  • 347.0 mm (1)
  • 350.0 mm (1)
  • 352.0 mm (2)
  • 356.0 mm (1)
  • 360.0 mm (2)
  • 366.0 mm (1)
  • 369.0 mm (1)
  • 375.0 mm (1)
  • 382.0 mm (1)
  • 385.0 mm (1)
  • 387.0 mm (1)
  • 390.0 mm (1)
  • 400.0 mm (2)
  • 412.0 mm (1)
  • 418.0 mm (1)
  • 420.0 mm (1)
  • 422.0 mm (1)
  • 440.0 mm (1)
  • 450.0 mm (1)
Maximum Hole Depth [L4] Min komu Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.732 in (3)
  • 1.772 in (4)
  • 2.205 in (4)
  • 2.283 in (2)
  • 2.323 in (3)
  • 2.362 in (4)
  • 2.638 in (1)
  • 2.717 in (1)
  • 2.757 in (1)
  • 2.914 in (3)
  • 2.953 in (6)
  • 3.031 in (1)
  • 3.11 in (3)
  • 3.15 in (1)
  • 3.189 in (1)
  • 3.269 in (1)
  • 3.426 in (1)
  • 3.465 in (1)
  • 3.504 in (6)
  • 3.543 in (3)
  • 3.701 in (1)
  • 3.819 in (1)
  • 3.858 in (1)
  • 3.898 in (1)
  • 3.938 in (2)
  • 4.055 in (1)
  • 4.094 in (4)
  • 4.134 in (2)
  • 4.173 in (2)
  • 4.409 in (1)
  • 4.488 in (1)
  • 4.529 in (1)
  • 4.567 in (1)
  • 4.606 in (2)
  • 4.646 in (2)
  • 4.686 in (3)
  • 4.724 in (5)
  • 4.921 in (1)
  • 5.236 in (1)
  • 5.276 in (4)
  • 5.315 in (1)
  • 5.354 in (1)
  • 5.394 in (3)
  • 5.433 in (3)
  • 5.472 in (2)
  • 5.513 in (1)
  • 5.591 in (1)
  • 5.67 in (1)
  • 5.748 in (1)
  • 5.787 in (2)
  • 5.827 in (2)
  • 5.867 in (4)
  • 5.906 in (3)
  • 6.063 in (2)
  • 6.181 in (2)
  • 6.26 in (2)
  • 6.299 in (2)
  • 6.417 in (1)
  • 6.457 in (2)
  • 6.496 in (2)
  • 6.575 in (1)
  • 6.654 in (1)
  • 6.732 in (1)
  • 6.772 in (1)
  • 6.891 in (3)
  • 6.929 in (1)
  • 6.969 in (1)
  • 7.008 in (2)
  • 7.047 in (1)
  • 7.087 in (3)
  • 7.362 in (1)
  • 7.638 in (4)
  • 7.678 in (2)
  • 7.756 in (2)
  • 7.795 in (1)
  • 7.835 in (1)
  • 7.875 in (3)
  • 7.953 in (1)
  • 8.11 in (1)
  • 8.228 in (1)
  • 8.268 in (2)
  • 8.425 in (1)
  • 8.544 in (1)
  • 8.622 in (2)
  • 8.661 in (1)
  • 8.701 in (1)
  • 8.819 in (2)
  • 8.858 in (2)
  • 8.937 in (1)
  • 8.976 in (1)
  • 9.252 in (1)
  • 9.331 in (1)
  • 9.371 in (1)
  • 9.409 in (2)
  • 9.449 in (5)
  • 9.843 in (1)
  • 10.118 in (1)
  • 10.157 in (1)
  • 10.198 in (1)
  • 10.236 in (1)
  • 10.315 in (1)
  • 10.355 in (1)
  • 10.394 in (1)
  • 10.433 in (1)
  • 10.512 in (1)
  • 10.592 in (1)
  • 10.63 in (1)
  • 10.749 in (1)
  • 10.787 in (1)
  • 10.827 in (1)
  • 10.906 in (1)
  • 11.025 in (2)
  • 11.496 in (1)
  • 11.576 in (1)
  • 11.693 in (2)
  • 11.811 in (3)
  • 12.087 in (1)
  • 12.441 in (1)
  • 12.48 in (1)
  • 12.52 in (1)
  • 12.56 in (1)