Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Frézování

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (8308)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(6945)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(7155)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(7187)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(7364)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(7919)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(7413)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(6837)
    • M Stainless Steel (7748)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(7748)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(7747)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(7067)
    • K Cast Iron (6635)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(6634)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(6630)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(5983)
    • N Non-Ferrous Materials (3390)
      • N1
        Wrought Aluminum (3363)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3356)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(3085)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1628)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1005)
      • N6
        Carbon, Graphite Composites, CFRP (813)
      • N7
        MMC's (800)
    • S High-Temp Alloys (6712)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(6267)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(6218)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(6336)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(6478)
    • H Hardened Materials (5884)
      • H1
        Hardened Materials 44-48 HRC(5851)
      • H2
        Hardened Materials 48-55 HRC(2776)
      • H3
        Hardened Materials 56-60 HRC(1136)
      • H4
        Hardened Materials >60 HRC(885)
    • C CFRP Materials (28)
      • C1
        CFRP, CFRP / CFRP (27)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (1)
    Vybrat první volbu
    • BR (194)
    • CN (874)
    • DE (1249)
    • GB (668)
    • IN (212)
    • SG (401)
    • US (1541)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (409)
    • Concave Radius MillingConcave Radius Milling (13)
    • DrillingDrilling (280)
    • Face MillingFace Milling (3397)
    • PocketPocket (5734)
    • Pocket HelicalPocket Helical (5692)
    • Pocket MillingPocket Milling (5968)
    • Pocket Plunge MillingPocket Plunge Milling (1967)
    • Profile MillingProfile Milling (1368)
    • RampingRamping (5611)
    • Shoulder Ball NoseShoulder Ball Nose (1211)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (238)
    • Shoulder MillingShoulder Milling (6499)
    • Shoulder RoughingShoulder Roughing (3495)
    • Shoulder Square EndShoulder Square End (5230)
    • Slot Ball NoseSlot Ball Nose (521)
    • Slot MillingSlot Milling (4403)
    • Slot SideSlot Side (388)
    • Slot Square EndSlot Square End (3561)
    • Slot TSlot T (30)
    • Trochoidal MillingTrochoidal Milling (1971)
    Cutting Diameter
    Cutting Diameter
    • 0.012 in(2)
    • 0.016 in(4)
    • 0.02 in(17)
    • 0.024 in(4)
    • 0.031 in(10)
    • 0.039 in(11)
    • 0.047 in(7)
    • 0.055 in(2)
    • 0.06 in(9)
    • 0.063 in(12)
    • 0.072 in(4)
    • 0.078 in(8)
    • 0.079 in(43)
    • 0.094 in(14)
    • 0.095 in(1)
    • 0.098 in(23)
    • 0.109 in(6)
    • 0.11 in(3)
    • 0.119 in(59)
    • 0.125 in(62)
    • 0.135 in(1)
    • 0.138 in(18)
    • 0.142 in(4)
    • 0.15 in(3)
    • 0.156 in(21)
    • 0.157 in(101)
    • 0.173 in(2)
    • 0.177 in(8)
    • 0.187 in(1)
    • 0.188 in(79)
    • 0.189 in(3)
    • 0.197 in(87)
    • 0.203 in(3)
    • 0.217 in(6)
    • 0.219 in(20)
    • 0.224 in(2)
    • 0.226 in(3)
    • 0.234 in(3)
    • 0.237 in(176)
    • 0.25 in(187)
    • 0.255 in(1)
    • 0.256 in(1)
    • 0.26 in(1)
    • 0.266 in(2)
    • 0.27 in(1)
    • 0.276 in(24)
    • 0.281 in(15)
    • 0.297 in(2)
    • 0.299 in(1)
    • 0.303 in(1)
    • 0.305 in(3)
    • 0.312 in(3)
    • 0.313 in(96)
    • 0.315 in(196)
    • 0.328 in(2)
    • 0.329 in(1)
    • 0.345 in(5)
    • 0.347 in(4)
    • 0.35 in(1)
    • 0.351 in(4)
    • 0.354 in(15)
    • 0.356 in(2)
    • 0.359 in(2)
    • 0.375 in(326)
    • 0.38 in(4)
    • 0.382 in(6)
    • 0.39 in(1)
    • 0.391 in(2)
    • 0.393 in(2)
    • 0.394 in(318)
    • 0.398 in(1)
    • 0.408 in(4)
    • 0.414 in(2)
    • 0.415 in(1)
    • 0.417 in(2)
    • 0.422 in(2)
    • 0.425 in(1)
    • 0.427 in(2)
    • 0.433 in(1)
    • 0.437 in(3)
    • 0.438 in(36)
    • 0.44 in(1)
    • 0.453 in(2)
    • 0.457 in(1)
    • 0.46 in(3)
    • 0.461 in(5)
    • 0.463 in(2)
    • 0.468 in(1)
    • 0.47 in(2)
    • 0.472 in(3)
    • 0.473 in(364)
    • 0.475 in(2)
    • 0.484 in(2)
    • 0.485 in(1)
    • 0.487 in(3)
    • 0.492 in(2)
    • 0.496 in(1)
    • 0.5 in(574)
    • 0.512 in(4)
    • 0.52 in(1)
    • 0.528 in(4)
    • 0.536 in(2)
    • 0.537 in(2)
    • 0.539 in(3)
    • 0.546 in(2)
    • 0.551 in(78)
    • 0.554 in(1)
    • 0.561 in(1)
    • 0.564 in(17)
    • 0.591 in(13)
    • 0.606 in(7)
    • 0.61 in(2)
    • 0.618 in(4)
    • 0.619 in(1)
    • 0.62 in(2)
    • 0.622 in(2)
    • 0.625 in(349)
    • 0.626 in(1)
    • 0.627 in(1)
    • 0.629 in(4)
    • 0.63 in(407)
    • 0.632 in(4)
    • 0.64 in(1)
    • 0.642 in(1)
    • 0.654 in(1)
    • 0.663 in(1)
    • 0.669 in(2)
    • 0.677 in(1)
    • 0.687 in(3)
    • 0.689 in(1)
    • 0.694 in(1)
    • 0.698 in(3)
    • 0.701 in(1)
    • 0.702 in(1)
    • 0.709 in(48)
    • 0.724 in(1)
    • 0.737 in(2)
    • 0.738 in(3)
    • 0.74 in(2)
    • 0.745 in(1)
    • 0.746 in(2)
    • 0.747 in(4)
    • 0.748 in(1)
    • 0.75 in(549)
    • 0.761 in(2)
    • 0.766 in(1)
    • 0.77 in(1)
    • 0.771 in(1)
    • 0.776 in(4)
    • 0.778 in(9)
    • 0.785 in(2)
    • 0.787 in(416)
    • 0.828 in(3)
    • 0.856 in(4)
    • 0.859 in(1)
    • 0.864 in(2)
    • 0.866 in(9)
    • 0.868 in(4)
    • 0.87 in(4)
    • 0.875 in(14)
    • 0.88 in(2)
    • 0.882 in(1)
    • 0.906 in(4)
    • 0.929 in(2)
    • 0.939 in(1)
    • 0.944 in(1)
    • 0.946 in(2)
    • 0.951 in(1)
    • 0.969 in(1)
    • 0.971 in(1)
    • 0.98 in(1)
    • 0.984 in(288)
    • 0.988 in(1)
    • 1.0 in(560)
    • 1.01 in(1)
    • 1.018 in(1)
    • 1.022 in(1)
    • 1.024 in(3)
    • 1.027 in(2)
    • 1.028 in(11)
    • 1.05 in(1)
    • 1.053 in(3)
    • 1.058 in(1)
    • 1.066 in(1)
    • 1.067 in(1)
    • 1.074 in(1)
    • 1.075 in(2)
    • 1.081 in(1)
    • 1.1 in(1)
    • 1.102 in(11)
    • 1.105 in(1)
    • 1.106 in(4)
    • 1.135 in(1)
    • 1.141 in(1)
    • 1.153 in(1)
    • 1.181 in(8)
    • 1.182 in(1)
    • 1.2 in(1)
    • 1.243 in(1)
    • 1.25 in(158)
    • 1.252 in(9)
    • 1.254 in(1)
    • 1.26 in(110)
    • 1.276 in(3)
    • 1.284 in(1)
    • 1.299 in(1)
    • 1.323 in(3)
    • 1.324 in(1)
    • 1.335 in(1)
    • 1.339 in(4)
    • 1.366 in(4)
    • 1.37 in(4)
    • 1.379 in(5)
    • 1.401 in(1)
    • 1.412 in(1)
    • 1.417 in(3)
    • 1.447 in(1)
    • 1.455 in(2)
    • 1.469 in(3)
    • 1.473 in(1)
    • 1.478 in(1)
    • 1.486 in(2)
    • 1.496 in(9)
    • 1.5 in(63)
    • 1.502 in(1)
    • 1.504 in(1)
    • 1.506 in(1)
    • 1.528 in(8)
    • 1.534 in(3)
    • 1.541 in(2)
    • 1.561 in(2)
    • 1.575 in(86)
    • 1.579 in(1)
    • 1.606 in(3)
    • 1.655 in(7)
    • 1.657 in(1)
    • 1.693 in(1)
    • 1.697 in(2)
    • 1.75 in(2)
    • 1.756 in(2)
    • 1.764 in(1)
    • 1.784 in(3)
    • 1.844 in(2)
    • 1.85 in(5)
    • 1.858 in(1)
    • 1.864 in(1)
    • 1.87 in(2)
    • 1.874 in(1)
    • 1.875 in(2)
    • 1.883 in(2)
    • 1.895 in(1)
    • 1.901 in(1)
    • 1.963 in(2)
    • 1.967 in(3)
    • 1.969 in(74)
    • 1.971 in(2)
    • 1.98 in(3)
    • 1.984 in(1)
    • 2.0 in(85)
    • 2.003 in(1)
    • 2.008 in(8)
    • 2.019 in(2)
    • 2.028 in(3)
    • 2.047 in(3)
    • 2.057 in(2)
    • 2.085 in(3)
    • 2.087 in(2)
    • 2.107 in(1)
    • 2.126 in(5)
    • 2.205 in(1)
    • 2.206 in(2)
    • 2.25 in(2)
    • 2.277 in(2)
    • 2.283 in(1)
    • 2.338 in(1)
    • 2.362 in(2)
    • 2.366 in(1)
    • 2.37 in(4)
    • 2.395 in(1)
    • 2.426 in(2)
    • 2.433 in(1)
    • 2.48 in(84)
    • 2.499 in(1)
    • 2.5 in(63)
    • 2.501 in(1)
    • 2.513 in(1)
    • 2.52 in(5)
    • 2.528 in(5)
    • 2.543 in(1)
    • 2.598 in(1)
    • 2.65 in(2)
    • 2.653 in(1)
    • 2.677 in(7)
    • 2.697 in(2)
    • 2.757 in(1)
    • 2.991 in(2)
    • 3.0 in(99)
    • 3.047 in(2)
    • 3.055 in(2)
    • 3.15 in(95)
    • 3.154 in(1)
    • 3.213 in(2)
    • 3.217 in(1)
    • 3.25 in(2)
    • 3.281 in(3)
    • 3.307 in(5)
    • 3.37 in(4)
    • 3.383 in(1)
    • 3.438 in(1)
    • 3.465 in(4)
    • 3.484 in(2)
    • 3.498 in(1)
    • 3.528 in(4)
    • 3.547 in(1)
    • 3.938 in(83)
    • 3.94 in(2)
    • 3.96 in(1)
    • 3.973 in(2)
    • 4.0 in(82)
    • 4.053 in(1)
    • 4.054 in(1)
    • 4.138 in(1)
    • 4.181 in(1)
    • 4.197 in(2)
    • 4.202 in(1)
    • 4.25 in(3)
    • 4.271 in(1)
    • 4.28 in(2)
    • 4.291 in(3)
    • 4.313 in(1)
    • 4.37 in(1)
    • 4.421 in(1)
    • 4.469 in(2)
    • 4.92 in(2)
    • 4.921 in(82)
    • 5.0 in(63)
    • 5.05 in(3)
    • 5.25 in(2)
    • 5.271 in(1)
    • 5.279 in(1)
    • 5.295 in(1)
    • 5.349 in(1)
    • 5.37 in(1)
    • 5.392 in(1)
    • 5.513 in(1)
    • 5.516 in(2)
    • 5.559 in(1)
    • 5.575 in(1)
    • 5.67 in(1)
    • 5.799 in(1)
    • 5.846 in(2)
    • 6.0 in(50)
    • 6.299 in(70)
    • 6.3 in(2)
    • 7.0 in(1)
    • 7.008 in(1)
    • 7.087 in(1)
    • 7.09 in(1)
    • 7.25 in(1)
    • 7.421 in(2)
    • 7.87 in(2)
    • 7.875 in(38)
    • 8.0 in(30)
    • 9.238 in(1)
    • 9.39 in(1)
    • 9.843 in(25)
    • 10.0 in(21)
    • 12.0 in(9)
    • 12.403 in(11)
    • 13.976 in(1)
    • 14.0 in(1)
    • 15.749 in(1)
    • 16.0 in(1)
    • 19.685 in(1)
    • 20.0 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.301 mm(2)
    • 0.4 mm(4)
    • 0.5 mm(17)
    • 0.601 mm(4)
    • 0.8 mm(10)
    • 1.0 mm(11)
    • 1.201 mm(7)
    • 1.401 mm(2)
    • 1.5 mm(9)
    • 1.6 mm(12)
    • 1.8 mm(4)
    • 1.975 mm(8)
    • 2.0 mm(43)
    • 2.375 mm(14)
    • 2.401 mm(1)
    • 2.5 mm(23)
    • 2.776 mm(6)
    • 2.801 mm(3)
    • 3.0 mm(59)
    • 3.176 mm(62)
    • 3.426 mm(1)
    • 3.5 mm(18)
    • 3.575 mm(4)
    • 3.801 mm(3)
    • 3.95 mm(2)
    • 3.975 mm(19)
    • 4.0 mm(101)
    • 4.375 mm(2)
    • 4.5 mm(8)
    • 4.75 mm(1)
    • 4.775 mm(79)
    • 4.801 mm(3)
    • 5.0 mm(87)
    • 5.15 mm(3)
    • 5.5 mm(6)
    • 5.551 mm(20)
    • 5.7 mm(2)
    • 5.75 mm(3)
    • 5.95 mm(3)
    • 6.0 mm(176)
    • 6.351 mm(187)
    • 6.476 mm(1)
    • 6.5 mm(1)
    • 6.601 mm(1)
    • 6.75 mm(2)
    • 6.851 mm(1)
    • 7.0 mm(24)
    • 7.15 mm(15)
    • 7.551 mm(2)
    • 7.601 mm(1)
    • 7.7 mm(1)
    • 7.75 mm(3)
    • 7.926 mm(3)
    • 7.95 mm(96)
    • 8.0 mm(196)
    • 8.326 mm(2)
    • 8.35 mm(1)
    • 8.725 mm(5)
    • 8.8 mm(4)
    • 8.875 mm(1)
    • 8.9 mm(4)
    • 9.0 mm(15)
    • 9.05 mm(2)
    • 9.125 mm(2)
    • 9.525 mm(326)
    • 9.65 mm(4)
    • 9.701 mm(6)
    • 9.9 mm(1)
    • 9.925 mm(2)
    • 9.976 mm(2)
    • 10.0 mm(318)
    • 10.101 mm(1)
    • 10.326 mm(4)
    • 10.5 mm(2)
    • 10.525 mm(1)
    • 10.601 mm(2)
    • 10.726 mm(2)
    • 10.8 mm(1)
    • 10.851 mm(2)
    • 11.0 mm(1)
    • 11.101 mm(3)
    • 11.125 mm(36)
    • 11.175 mm(1)
    • 11.5 mm(2)
    • 11.601 mm(1)
    • 11.675 mm(3)
    • 11.701 mm(5)
    • 11.75 mm(2)
    • 11.875 mm(1)
    • 11.9 mm(2)
    • 11.976 mm(3)
    • 12.0 mm(364)
    • 12.05 mm(2)
    • 12.3 mm(2)
    • 12.326 mm(1)
    • 12.375 mm(3)
    • 12.5 mm(2)
    • 12.601 mm(1)
    • 12.701 mm(574)
    • 13.0 mm(4)
    • 13.201 mm(1)
    • 13.4 mm(4)
    • 13.625 mm(2)
    • 13.65 mm(2)
    • 13.701 mm(3)
    • 13.875 mm(2)
    • 14.0 mm(78)
    • 14.076 mm(1)
    • 14.25 mm(1)
    • 14.3 mm(17)
    • 15.0 mm(13)
    • 15.4 mm(7)
    • 15.5 mm(2)
    • 15.701 mm(4)
    • 15.726 mm(1)
    • 15.75 mm(2)
    • 15.8 mm(2)
    • 15.875 mm(349)
    • 15.9 mm(1)
    • 15.925 mm(1)
    • 15.976 mm(4)
    • 16.0 mm(407)
    • 16.05 mm(4)
    • 16.25 mm(1)
    • 16.3 mm(1)
    • 16.6 mm(1)
    • 16.85 mm(1)
    • 17.0 mm(2)
    • 17.2 mm(1)
    • 17.45 mm(3)
    • 17.475 mm(1)
    • 17.6 mm(1)
    • 17.7 mm(3)
    • 17.776 mm(1)
    • 17.8 mm(1)
    • 18.0 mm(48)
    • 18.401 mm(1)
    • 18.725 mm(2)
    • 18.75 mm(3)
    • 18.8 mm(2)
    • 18.925 mm(1)
    • 18.95 mm(2)
    • 18.975 mm(4)
    • 19.0 mm(1)
    • 19.05 mm(549)
    • 19.326 mm(2)
    • 19.451 mm(1)
    • 19.55 mm(1)
    • 19.576 mm(1)
    • 19.701 mm(4)
    • 19.75 mm(9)
    • 19.951 mm(2)
    • 20.0 mm(416)
    • 21.0 mm(3)
    • 21.75 mm(4)
    • 21.826 mm(1)
    • 21.951 mm(2)
    • 22.0 mm(9)
    • 22.05 mm(4)
    • 22.1 mm(4)
    • 22.225 mm(14)
    • 22.35 mm(2)
    • 22.401 mm(1)
    • 23.0 mm(4)
    • 23.6 mm(2)
    • 23.826 mm(1)
    • 23.951 mm(1)
    • 24.0 mm(2)
    • 24.125 mm(1)
    • 24.6 mm(1)
    • 24.651 mm(1)
    • 24.901 mm(1)
    • 25.0 mm(288)
    • 25.1 mm(1)
    • 25.401 mm(560)
    • 25.651 mm(1)
    • 25.826 mm(1)
    • 25.925 mm(1)
    • 26.0 mm(3)
    • 26.076 mm(2)
    • 26.1 mm(11)
    • 26.675 mm(1)
    • 26.75 mm(3)
    • 26.875 mm(1)
    • 27.076 mm(1)
    • 27.1 mm(1)
    • 27.276 mm(1)
    • 27.3 mm(2)
    • 27.451 mm(1)
    • 27.951 mm(1)
    • 28.0 mm(11)
    • 28.076 mm(1)
    • 28.1 mm(4)
    • 28.826 mm(1)
    • 28.951 mm(1)
    • 29.25 mm(1)
    • 30.0 mm(8)
    • 30.026 mm(1)
    • 30.475 mm(1)
    • 31.576 mm(1)
    • 31.75 mm(158)
    • 31.8 mm(9)
    • 31.826 mm(1)
    • 32.0 mm(110)
    • 32.4 mm(3)
    • 32.625 mm(1)
    • 33.0 mm(1)
    • 33.6 mm(3)
    • 33.625 mm(1)
    • 33.9 mm(1)
    • 34.0 mm(4)
    • 34.7 mm(4)
    • 34.801 mm(4)
    • 35.0 mm(5)
    • 35.551 mm(1)
    • 35.875 mm(1)
    • 36.0 mm(3)
    • 36.75 mm(1)
    • 36.95 mm(2)
    • 37.301 mm(3)
    • 37.426 mm(1)
    • 37.551 mm(1)
    • 37.75 mm(2)
    • 38.0 mm(9)
    • 38.1 mm(63)
    • 38.125 mm(1)
    • 38.2 mm(1)
    • 38.225 mm(1)
    • 38.801 mm(8)
    • 38.95 mm(2)
    • 38.975 mm(1)
    • 39.151 mm(2)
    • 39.651 mm(2)
    • 40.0 mm(86)
    • 40.1 mm(1)
    • 40.801 mm(3)
    • 42.0 mm(7)
    • 42.051 mm(1)
    • 43.0 mm(1)
    • 43.1 mm(2)
    • 44.45 mm(2)
    • 44.6 mm(2)
    • 44.801 mm(1)
    • 45.301 mm(2)
    • 45.325 mm(1)
    • 46.85 mm(2)
    • 47.0 mm(5)
    • 47.2 mm(1)
    • 47.35 mm(1)
    • 47.5 mm(2)
    • 47.6 mm(1)
    • 47.625 mm(2)
    • 47.801 mm(2)
    • 48.125 mm(1)
    • 48.25 mm(1)
    • 49.85 mm(2)
    • 49.95 mm(3)
    • 50.0 mm(74)
    • 50.051 mm(2)
    • 50.301 mm(3)
    • 50.401 mm(1)
    • 50.801 mm(85)
    • 50.875 mm(1)
    • 51.0 mm(8)
    • 51.276 mm(2)
    • 51.5 mm(3)
    • 52.0 mm(3)
    • 52.25 mm(2)
    • 52.95 mm(3)
    • 53.0 mm(2)
    • 53.526 mm(1)
    • 54.0 mm(5)
    • 56.0 mm(1)
    • 56.026 mm(2)
    • 57.151 mm(2)
    • 57.801 mm(2)
    • 58.0 mm(1)
    • 59.375 mm(1)
    • 60.0 mm(2)
    • 60.1 mm(1)
    • 60.2 mm(4)
    • 60.825 mm(1)
    • 61.6 mm(2)
    • 61.801 mm(1)
    • 63.0 mm(84)
    • 63.475 mm(1)
    • 63.5 mm(63)
    • 63.526 mm(1)
    • 63.825 mm(1)
    • 64.0 mm(5)
    • 64.2 mm(5)
    • 64.601 mm(1)
    • 66.0 mm(1)
    • 67.3 mm(2)
    • 67.375 mm(1)
    • 68.0 mm(7)
    • 68.5 mm(2)
    • 70.0 mm(1)
    • 75.976 mm(2)
    • 76.2 mm(99)
    • 77.375 mm(2)
    • 77.575 mm(2)
    • 80.0 mm(95)
    • 80.101 mm(1)
    • 81.601 mm(2)
    • 81.7 mm(1)
    • 82.551 mm(2)
    • 83.301 mm(3)
    • 84.0 mm(5)
    • 85.601 mm(4)
    • 85.926 mm(1)
    • 87.301 mm(1)
    • 88.0 mm(4)
    • 88.5 mm(2)
    • 88.851 mm(1)
    • 89.601 mm(4)
    • 90.101 mm(1)
    • 100.0 mm(83)
    • 100.075 mm(2)
    • 100.575 mm(1)
    • 100.926 mm(2)
    • 101.601 mm(82)
    • 102.926 mm(1)
    • 102.976 mm(1)
    • 105.101 mm(1)
    • 106.2 mm(1)
    • 106.601 mm(2)
    • 106.7 mm(1)
    • 107.95 mm(3)
    • 108.45 mm(1)
    • 108.7 mm(2)
    • 109.0 mm(3)
    • 109.551 mm(1)
    • 111.0 mm(1)
    • 112.301 mm(1)
    • 113.5 mm(2)
    • 124.976 mm(2)
    • 125.0 mm(82)
    • 127.0 mm(63)
    • 128.275 mm(3)
    • 133.35 mm(2)
    • 133.85 mm(1)
    • 134.076 mm(1)
    • 134.5 mm(1)
    • 135.875 mm(1)
    • 136.4 mm(1)
    • 136.951 mm(1)
    • 140.0 mm(1)
    • 140.1 mm(2)
    • 141.201 mm(1)
    • 141.6 mm(1)
    • 144.0 mm(1)
    • 147.3 mm(1)
    • 148.5 mm(2)
    • 152.4 mm(50)
    • 160.0 mm(70)
    • 160.025 mm(2)
    • 177.8 mm(1)
    • 178.0 mm(1)
    • 180.0 mm(1)
    • 180.076 mm(1)
    • 184.15 mm(1)
    • 188.5 mm(2)
    • 199.9 mm(2)
    • 200.0 mm(38)
    • 203.201 mm(30)
    • 234.65 mm(1)
    • 238.5 mm(1)
    • 250.0 mm(25)
    • 254.0 mm(21)
    • 304.8 mm(9)
    • 315.0 mm(11)
    • 355.0 mm(1)
    • 355.6 mm(1)
    • 400.0 mm(1)
    • 406.401 mm(1)
    • 500.0 mm(1)
    • 508.0 mm(1)
    Cutting Diameter Min