Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Shoulder Mills

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1140)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1041)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1041)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1041)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1041)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1043)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1138)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1138)
    • M Stainless Steel (1110)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1110)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1110)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1110)
    • K Cast Iron (951)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(951)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(950)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(950)
    • N Non-Ferrous Materials (605)
      • N1
        Wrought Aluminum (605)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(604)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(604)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (118)
    • S High-Temp Alloys (1092)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(997)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(997)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(997)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1092)
    • H Hardened Materials (680)
      • H1
        Hardened Materials 44-48 HRC(680)
    Vybrat první volbu
    • BR (62)
    • CN (383)
    • DE (383)
    • GB (219)
    • IN (78)
    • SG (154)
    • US (340)
    Applications
    Applications
    • Face MillingFace Milling (648)
    • PocketPocket (327)
    • Pocket HelicalPocket Helical (325)
    • Pocket MillingPocket Milling (355)
    • Profile MillingProfile Milling (32)
    • RampingRamping (351)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (109)
    • Shoulder MillingShoulder Milling (648)
    • Shoulder RoughingShoulder Roughing (415)
    • Shoulder Square EndShoulder Square End (567)
    • Slot MillingSlot Milling (383)
    • Slot SideSlot Side (47)
    • Slot Square EndSlot Square End (389)
    • Slot TSlot T (25)
    Cutting Diameter
    Cutting Diameter
    • 0.468 in(1)
    • 0.473 in(2)
    • 0.496 in(1)
    • 0.5 in(1)
    • 0.62 in(1)
    • 0.625 in(9)
    • 0.63 in(10)
    • 0.709 in(1)
    • 0.745 in(1)
    • 0.75 in(21)
    • 0.787 in(25)
    • 0.866 in(1)
    • 0.875 in(2)
    • 0.969 in(1)
    • 0.971 in(1)
    • 0.984 in(40)
    • 1.0 in(47)
    • 1.1 in(1)
    • 1.102 in(1)
    • 1.25 in(36)
    • 1.252 in(9)
    • 1.26 in(51)
    • 1.339 in(1)
    • 1.379 in(1)
    • 1.5 in(36)
    • 1.504 in(1)
    • 1.575 in(43)
    • 1.655 in(1)
    • 1.969 in(33)
    • 2.0 in(48)
    • 2.48 in(32)
    • 2.5 in(27)
    • 3.0 in(48)
    • 3.15 in(25)
    • 3.938 in(16)
    • 4.0 in(18)
    • 4.921 in(12)
    • 5.0 in(10)
    • 6.0 in(13)
    • 6.299 in(11)
    • 7.875 in(4)
    • 8.0 in(6)
    • 10.0 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 11.875 mm(1)
    • 12.0 mm(2)
    • 12.601 mm(1)
    • 12.701 mm(1)
    • 15.75 mm(1)
    • 15.875 mm(9)
    • 16.0 mm(10)
    • 18.0 mm(1)
    • 18.925 mm(1)
    • 19.05 mm(21)
    • 20.0 mm(25)
    • 22.0 mm(1)
    • 22.225 mm(2)
    • 24.6 mm(1)
    • 24.651 mm(1)
    • 25.0 mm(40)
    • 25.401 mm(47)
    • 27.951 mm(1)
    • 28.0 mm(1)
    • 31.75 mm(36)
    • 31.8 mm(9)
    • 32.0 mm(51)
    • 34.0 mm(1)
    • 35.0 mm(1)
    • 38.1 mm(36)
    • 38.2 mm(1)
    • 40.0 mm(43)
    • 42.0 mm(1)
    • 50.0 mm(33)
    • 50.801 mm(48)
    • 63.0 mm(32)
    • 63.5 mm(27)
    • 76.2 mm(48)
    • 80.0 mm(25)
    • 100.0 mm(16)
    • 101.601 mm(18)
    • 125.0 mm(12)
    • 127.0 mm(10)
    • 152.4 mm(13)
    • 160.0 mm(11)
    • 200.0 mm(4)
    • 203.201 mm(6)
    • 254.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 25.401 mm(1)
    • 38.1 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.0 in(1)
    • 1.5 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 6.551 mm(4)
    • 6.575 mm(12)
    • 6.926 mm(2)
    • 6.95 mm(3)
    • 6.976 mm(2)
    • 9.15 mm(26)
    • 9.175 mm(14)
    • 9.675 mm(1)
    • 9.701 mm(2)
    • 9.726 mm(1)
    • 9.75 mm(3)
    • 9.775 mm(2)
    • 9.8 mm(1)
    • 9.826 mm(2)
    • 9.875 mm(15)
    • 9.9 mm(1)
    • 9.925 mm(4)
    • 9.951 mm(18)
    • 10.0 mm(2)
    • 10.025 mm(18)
    • 10.05 mm(12)
    • 10.076 mm(7)
    • 10.101 mm(10)
    • 10.25 mm(2)
    • 11.0 mm(63)
    • 12.125 mm(6)
    • 12.15 mm(35)
    • 14.0 mm(14)
    • 14.101 mm(6)
    • 14.201 mm(2)
    • 14.3 mm(11)
    • 14.4 mm(9)
    • 14.476 mm(6)
    • 14.5 mm(9)
    • 14.601 mm(15)
    • 14.701 mm(3)
    • 14.726 mm(6)
    • 15.5 mm(73)
    • 15.976 mm(2)
    • 16.0 mm(31)
    • 16.2 mm(2)
    • 16.401 mm(6)
    • 17.0 mm(3)
    • 17.401 mm(20)
    • 17.5 mm(4)
    • 17.6 mm(5)
    • 17.7 mm(7)
    • 17.8 mm(3)
    • 17.901 mm(4)
    • 18.0 mm(29)
    • 18.675 mm(3)
    • 18.8 mm(3)
    • 18.925 mm(3)
    • 26.901 mm(1)
    • 27.201 mm(1)
    • 27.3 mm(1)
    • 27.5 mm(1)
    • 27.6 mm(1)
    • 27.75 mm(2)
    • 27.776 mm(1)
    • 27.8 mm(2)
    • 35.926 mm(1)
    • 35.95 mm(1)
    • 36.0 mm(2)
    • 36.375 mm(3)
    • 39.901 mm(2)
    • 39.95 mm(2)
    • 40.401 mm(2)
    • 40.801 mm(2)
    • 40.95 mm(1)
    • 44.325 mm(4)
    • 44.776 mm(3)
    • 44.801 mm(2)
    • 50.875 mm(2)
    • 51.0 mm(1)
    • 52.801 mm(1)
    • 52.825 mm(1)
    • 52.85 mm(1)
    • 53.45 mm(1)
    • 53.5 mm(1)
    • 54.0 mm(1)
    • 54.1 mm(1)
    • 54.401 mm(3)
    • 54.426 mm(3)
    • 54.825 mm(1)
    • 57.0 mm(1)
    • 60.776 mm(1)
    • 61.0 mm(1)
    • 65.0 mm(2)
    • 70.95 mm(1)
    • 72.0 mm(1)
    • 77.051 mm(4)
    • 77.075 mm(1)
    • 77.525 mm(1)
    • 77.551 mm(1)
    • 78.351 mm(1)
    • 78.375 mm(3)
    • 80.0 mm(1)
    • 81.176 mm(1)
    • 81.2 mm(1)
    • 85.025 mm(1)
    • 86.075 mm(1)
    • 94.0 mm(2)
    • 100.0 mm(1)
    • 101.5 mm(1)
    • 101.625 mm(1)
    • 102.2 mm(3)
    • 102.226 mm(1)
    • 107.25 mm(2)
    • 107.275 mm(1)
    • 107.601 mm(3)
    • 110.0 mm(1)
    • 132.275 mm(3)
    • 132.9 mm(1)
    • 133.0 mm(1)
    • 133.675 mm(2)
    • 134.451 mm(1)
    • 184.851 mm(2)
    • 236.05 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.258 in(4)
    • 0.259 in(12)
    • 0.273 in(2)
    • 0.274 in(3)
    • 0.275 in(2)
    • 0.36 in(26)
    • 0.361 in(14)
    • 0.381 in(1)
    • 0.382 in(2)
    • 0.383 in(1)
    • 0.384 in(3)
    • 0.385 in(2)
    • 0.386 in(1)
    • 0.387 in(2)
    • 0.389 in(15)
    • 0.39 in(1)
    • 0.391 in(4)
    • 0.392 in(18)
    • 0.394 in(2)
    • 0.395 in(18)
    • 0.396 in(12)
    • 0.397 in(7)
    • 0.398 in(10)
    • 0.404 in(2)
    • 0.433 in(63)
    • 0.478 in(6)
    • 0.479 in(35)
    • 0.551 in(14)
    • 0.555 in(6)
    • 0.559 in(2)
    • 0.564 in(11)
    • 0.568 in(9)
    • 0.571 in(6)
    • 0.572 in(9)
    • 0.576 in(15)
    • 0.579 in(3)
    • 0.58 in(6)
    • 0.61 in(73)
    • 0.629 in(2)
    • 0.63 in(31)
    • 0.638 in(2)
    • 0.646 in(6)
    • 0.669 in(3)
    • 0.685 in(20)
    • 0.69 in(4)
    • 0.694 in(5)
    • 0.698 in(7)
    • 0.702 in(3)
    • 0.705 in(4)
    • 0.709 in(29)
    • 0.735 in(3)
    • 0.74 in(3)
    • 0.745 in(3)
    • 1.059 in(1)
    • 1.071 in(1)
    • 1.075 in(1)
    • 1.083 in(1)
    • 1.087 in(1)
    • 1.093 in(2)
    • 1.094 in(3)
    • 1.414 in(1)
    • 1.415 in(1)
    • 1.417 in(2)
    • 1.432 in(3)
    • 1.571 in(2)
    • 1.573 in(2)
    • 1.591 in(2)
    • 1.606 in(2)
    • 1.612 in(1)
    • 1.745 in(4)
    • 1.764 in(5)
    • 2.003 in(2)
    • 2.008 in(1)
    • 2.079 in(1)
    • 2.08 in(1)
    • 2.081 in(1)
    • 2.104 in(1)
    • 2.106 in(1)
    • 2.126 in(1)
    • 2.13 in(1)
    • 2.142 in(3)
    • 2.144 in(3)
    • 2.158 in(1)
    • 2.244 in(1)
    • 2.394 in(1)
    • 2.402 in(1)
    • 2.559 in(2)
    • 2.793 in(1)
    • 2.835 in(1)
    • 3.035 in(5)
    • 3.052 in(1)
    • 3.053 in(1)
    • 3.085 in(1)
    • 3.086 in(3)
    • 3.15 in(1)
    • 3.196 in(1)
    • 3.197 in(1)
    • 3.347 in(1)
    • 3.39 in(1)
    • 3.701 in(2)
    • 3.938 in(1)
    • 3.996 in(1)
    • 4.001 in(1)
    • 4.024 in(3)
    • 4.025 in(1)
    • 4.222 in(2)
    • 4.223 in(1)
    • 4.236 in(3)
    • 4.331 in(1)
    • 5.208 in(3)
    • 5.232 in(1)
    • 5.236 in(1)
    • 5.263 in(2)
    • 5.293 in(1)
    • 7.279 in(2)
    • 9.294 in(2)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.709 in(1)
    • 0.75 in(1)
    • 0.787 in(4)
    • 0.8 in(1)
    • 0.972 in(1)
    • 0.984 in(8)
    • 0.987 in(1)
    • 0.999 in(1)
    • 1.0 in(8)
    • 1.053 in(2)
    • 1.1 in(12)
    • 1.102 in(15)
    • 1.22 in(1)
    • 1.239 in(1)
    • 1.249 in(2)
    • 1.25 in(16)
    • 1.26 in(14)
    • 1.341 in(1)
    • 1.379 in(4)
    • 1.393 in(1)
    • 1.417 in(2)
    • 1.47 in(1)
    • 1.5 in(9)
    • 1.536 in(4)
    • 1.564 in(2)
    • 1.574 in(2)
    • 1.575 in(108)
    • 1.589 in(2)
    • 1.6 in(7)
    • 1.614 in(2)
    • 1.625 in(2)
    • 1.688 in(1)
    • 1.693 in(5)
    • 1.73 in(1)
    • 1.732 in(7)
    • 1.75 in(56)
    • 1.752 in(5)
    • 1.772 in(5)
    • 1.79 in(1)
    • 1.811 in(2)
    • 1.879 in(2)
    • 1.889 in(1)
    • 1.891 in(2)
    • 1.901 in(2)
    • 1.929 in(9)
    • 1.967 in(1)
    • 1.969 in(86)
    • 1.97 in(1)
    • 2.0 in(31)
    • 2.091 in(2)
    • 2.126 in(3)
    • 2.188 in(1)
    • 2.189 in(1)
    • 2.23 in(2)
    • 2.25 in(27)
    • 2.253 in(1)
    • 2.362 in(2)
    • 2.375 in(8)
    • 2.38 in(18)
    • 2.4 in(2)
    • 2.48 in(27)
    • 2.5 in(9)
    • 2.559 in(4)
    • 2.625 in(1)
    • 2.677 in(1)
    • 2.75 in(3)
    • 2.953 in(11)
    • 2.992 in(1)
    • 3.0 in(7)
    • 3.15 in(3)
    • 3.346 in(1)
    • 3.5 in(8)
    • 3.543 in(1)
    • 3.688 in(1)
    • 3.74 in(5)
    • 3.75 in(4)
    • 3.858 in(1)
    • 4.0 in(3)
    • 4.033 in(1)
    • 4.055 in(1)
    • 4.173 in(1)
    • 4.187 in(1)
    • 4.188 in(1)
    • 4.25 in(3)
    • 4.252 in(3)
    • 4.437 in(1)
    • 4.5 in(2)
    • 4.529 in(2)
    • 4.561 in(1)
    • 4.686 in(2)
    • 4.882 in(2)
    • 5.0 in(4)
    • 5.404 in(1)
    • 5.421 in(1)
    • 5.63 in(1)
    • 5.664 in(3)
    • 6.11 in(1)
    • 6.152 in(1)
    • 6.496 in(1)
    • 7.655 in(2)
    • 9.592 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 18.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(4)
    • 20.326 mm(1)
    • 24.701 mm(1)
    • 25.0 mm(8)
    • 25.076 mm(1)
    • 25.375 mm(1)
    • 25.401 mm(8)
    • 26.75 mm(2)
    • 27.951 mm(12)
    • 28.0 mm(15)
    • 31.0 mm(1)
    • 31.475 mm(1)
    • 31.725 mm(2)
    • 31.75 mm(16)
    • 32.0 mm(14)
    • 34.051 mm(1)
    • 35.0 mm(4)
    • 35.35 mm(1)
    • 36.0 mm(2)
    • 37.35 mm(1)
    • 38.1 mm(9)
    • 39.0 mm(4)
    • 39.725 mm(2)
    • 39.975 mm(2)
    • 40.0 mm(108)
    • 40.35 mm(2)
    • 40.651 mm(7)
    • 41.0 mm(2)
    • 41.276 mm(2)
    • 42.875 mm(1)
    • 43.0 mm(5)
    • 43.95 mm(1)
    • 44.0 mm(7)
    • 44.45 mm(56)
    • 44.5 mm(5)
    • 45.0 mm(5)
    • 45.475 mm(1)
    • 46.0 mm(2)
    • 47.725 mm(2)
    • 47.975 mm(1)
    • 48.0 mm(2)
    • 48.25 mm(2)
    • 49.0 mm(9)
    • 49.95 mm(1)
    • 50.0 mm(86)
    • 50.026 mm(1)
    • 50.801 mm(31)
    • 53.1 mm(2)
    • 54.0 mm(3)
    • 55.575 mm(1)
    • 55.6 mm(1)
    • 56.651 mm(2)
    • 57.151 mm(27)
    • 57.2 mm(1)
    • 60.0 mm(2)
    • 60.325 mm(8)
    • 60.45 mm(18)
    • 60.95 mm(2)
    • 63.0 mm(27)
    • 63.5 mm(9)
    • 65.0 mm(4)
    • 66.675 mm(1)
    • 68.0 mm(1)
    • 69.851 mm(3)
    • 75.0 mm(11)
    • 76.0 mm(1)
    • 76.2 mm(7)
    • 80.0 mm(3)
    • 85.0 mm(1)
    • 88.9 mm(8)
    • 90.0 mm(1)
    • 93.676 mm(1)
    • 95.0 mm(5)
    • 95.25 mm(4)
    • 98.0 mm(1)
    • 101.601 mm(3)
    • 102.426 mm(1)
    • 103.0 mm(1)
    • 106.0 mm(1)
    • 106.351 mm(1)
    • 106.375 mm(1)
    • 107.95 mm(3)
    • 108.0 mm(3)
    • 112.7 mm(1)
    • 114.301 mm(2)
    • 115.0 mm(2)
    • 115.851 mm(1)
    • 119.0 mm(1)
    • 119.025 mm(1)
    • 124.0 mm(2)
    • 127.0 mm(4)
    • 137.225 mm(1)
    • 137.701 mm(1)
    • 143.0 mm(1)
    • 143.875 mm(3)
    • 155.201 mm(1)
    • 156.25 mm(1)
    • 165.0 mm(1)
    • 194.425 mm(2)
    • 243.601 mm(2)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (650)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • 2 Key & Cutter Retention Screw (2)
    • 2 Key & Socket Head Cap Screw (1)
    • A-Socket Head Cap Screw (257)
    • B-Cutter Retention Screw (25)
    • BTF (15)
    • C-Bolt Circle (14)
    • CV-Caterpillar V-Flange In (9)
    • HSK (5)
    • SHCS or RetScrw Or BoltCircle (8)
    • Screw-On Connection (57)
    • Straight-Cylindrical (149)
    • Weldon (108)
    Number of Flutes
    Number of Flutes
    • 1 (4)
    • 10 (16)
    • 11 (8)
    • 12 (15)
    • 14 (4)
    • 16 (8)
    • 18 (2)
    • 2 (103)
    • 22 (2)
    • 3 (140)
    • 4 (130)
    • 5 (97)
    • 6 (46)
    • 7 (26)
    • 8 (35)
    • 9 (14)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (119)
    • 2.0 (754)
    • 4.0 (650)
    • 8.0 (69)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.25 in(1)
    • 1.484 in(1)
    • 1.5 in(3)
    • 1.574 in(2)
    • 1.575 in(81)
    • 1.655 in(1)
    • 1.669 in(1)
    • 1.681 in(1)
    • 1.75 in(29)
    • 1.752 in(5)
    • 1.772 in(5)
    • 1.848 in(2)
    • 1.85 in(2)
    • 1.889 in(1)
    • 1.891 in(1)
    • 1.969 in(41)
    • 1.97 in(1)
    • 2.0 in(27)
    • 2.008 in(1)
    • 2.116 in(4)
    • 2.126 in(4)
    • 2.165 in(1)
    • 2.244 in(3)
    • 2.362 in(2)
    • 2.375 in(8)
    • 2.38 in(18)
    • 2.4 in(2)
    • 2.406 in(3)
    • 2.441 in(1)
    • 2.48 in(32)
    • 2.5 in(8)
    • 2.52 in(2)
    • 2.539 in(14)
    • 2.559 in(3)
    • 2.677 in(1)
    • 2.715 in(3)
    • 2.75 in(2)
    • 2.835 in(2)
    • 2.872 in(1)
    • 2.874 in(3)
    • 2.906 in(1)
    • 2.914 in(2)
    • 2.953 in(4)
    • 2.992 in(1)
    • 3.0 in(2)
    • 3.031 in(1)
    • 3.11 in(4)
    • 3.13 in(4)
    • 3.281 in(2)
    • 3.346 in(1)
    • 3.422 in(1)
    • 3.426 in(1)
    • 3.5 in(11)
    • 3.504 in(4)
    • 3.531 in(3)
    • 3.543 in(6)
    • 3.551 in(1)
    • 3.74 in(5)
    • 3.75 in(1)
    • 3.781 in(6)
    • 3.858 in(1)
    • 3.88 in(2)
    • 3.938 in(10)
    • 3.969 in(1)
    • 3.976 in(4)
    • 4.0 in(7)
    • 4.01 in(1)
    • 4.03 in(10)
    • 4.055 in(2)
    • 4.071 in(1)
    • 4.134 in(1)
    • 4.173 in(1)
    • 4.213 in(3)
    • 4.28 in(2)
    • 4.331 in(19)
    • 4.37 in(11)
    • 4.407 in(1)
    • 4.469 in(2)
    • 4.5 in(6)
    • 4.51 in(2)
    • 4.529 in(6)
    • 4.53 in(14)
    • 4.532 in(1)
    • 4.724 in(2)
    • 4.734 in(1)
    • 4.78 in(1)
    • 4.8 in(5)
    • 4.882 in(2)
    • 4.961 in(1)
    • 5.0 in(7)
    • 5.03 in(1)
    • 5.118 in(2)
    • 5.157 in(1)
    • 5.187 in(1)
    • 5.2 in(2)
    • 5.232 in(1)
    • 5.236 in(3)
    • 5.28 in(1)
    • 5.281 in(1)
    • 5.315 in(2)
    • 5.551 in(2)
    • 5.562 in(2)
    • 5.63 in(1)
    • 5.687 in(3)
    • 5.69 in(1)
    • 5.906 in(4)
    • 5.945 in(1)
    • 5.969 in(1)
    • 6.0 in(4)
    • 6.03 in(1)
    • 6.468 in(1)
    • 6.469 in(1)
    • 6.496 in(1)
    • 6.5 in(1)
    • 6.53 in(1)
    • 6.531 in(1)
    • 6.681 in(1)
    • 6.682 in(2)
    • 6.688 in(1)
    • 6.689 in(1)
    • 6.694 in(12)
    • 6.7 in(4)
    • 6.891 in(1)
    • 7.0 in(3)
    • 7.187 in(1)
    • 7.5 in(6)
    • 7.562 in(2)
    • 7.758 in(3)
    • 7.863 in(4)
    • 7.875 in(20)
    • 7.989 in(3)
    • 8.0 in(15)
    • 8.031 in(1)
    • 9.215 in(1)
    • 9.5 in(2)
    • 9.843 in(3)
    • 10.0 in(10)
    • 11.5 in(2)
    Over All Length [L] Min