successfully added to cart
View Cart

Notifications

Mark all as read
Read More

Maximální produktivita

Vlastní konstrukce čela — Prohnuté řezné hrany zvyšují stabilitu rohů a umožňují lehké řezy i při nejvyšších úhlech sestupu.

Vlastní konstrukce jádra — Lepší stabilita nástroje.

Inovativní konstrukce čela — Asymetricky rozdělené břity a proměnná šroubovice tlumí vibrace a umožňuje dosažení neporovnatelných hodnot posuvů.

Vlastní odlehčení — technologie AVF. Přesně vybroušené excentrické odlehčení snižuje chvění a tření. Vynikající řezné podmínky v různých materiálech.

Vlastní konstrukce drážky — Inovativní utvařeče v drážce pro odvod třísek snižují řezné síly a podporují účinný odvod třísek.

HARVI™ I TE

Inovativní vlastní konstrukce
zaručuje maximální produktivitu.

   

Maximální výhody

HARVI™ I TE — Inovativní vlastní konstrukce zaměřená na maximální produktivitu.

Univerzální použití. S výjimečnými posuvy a neporovnatelnými hodnotami úběru materiálu obrábí oceli, nerezové oceli, litiny a žáruvzdorné slitiny.

Vhodné pro různé operace včetně dynamického frézování a extrémních zavrtávacích operací.

4-břité stopkové frézy pro vysoce výkonné hrubování a dokončování jedním nástrojem.

HARVI I TE — Maximální úběry materiálu. Maximální produktivita. Maximální výhody.

     

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (702)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (702)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (702)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (702)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (702)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (702)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (702)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (702)
  • M Stainless Steel (702)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (702)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (702)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (702)
  • K Cast Iron (702)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (702)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (702)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (702)
  • S High-Temp Alloys (702)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (702)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (702)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (702)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (702)
  • H Hardened Materials (702)
    • H1
      Hardened Materials 44-48 HRC
      (702)
    • H2
      Hardened Materials 48-55 HRC
      (702)
Select First Choice
  • CN (216)
  • DE (166)
  • GB (38)
  • SG (47)
  • US (361)
Applications
Applications
  • Drilling Drilling (220)
  • Face Milling Face Milling (377)
  • Pocket Pocket (652)
  • Pocket Helical Pocket Helical (652)
  • Pocket Milling Pocket Milling (645)
  • Pocket Plunge Milling Pocket Plunge Milling (652)
  • Profile Milling Profile Milling (50)
  • Ramping Ramping (652)
  • Shoulder Ball Nose Shoulder Ball Nose (50)
  • Shoulder Milling Shoulder Milling (695)
  • Shoulder Roughing Shoulder Roughing (652)
  • Shoulder Square End Shoulder Square End (652)
  • Slot Ball Nose Slot Ball Nose (50)
  • Slot Milling Slot Milling (695)
  • Slot Square End Slot Square End (652)
  • Trochoidal Milling Trochoidal Milling (702)
Cutting Diameter
Cutting Diameter
  • 0.0625 in (2)
  • 0.0781 in (1)
  • 0.0787 in (12)
  • 0.0938 in (2)
  • 0.0984 in (10)
  • 0.1094 in (1)
  • 0.1181 in (12)
  • 0.125 in (10)
  • 0.1378 in (10)
  • 0.1563 in (3)
  • 0.1575 in (20)
  • 0.1875 in (10)
  • 0.1969 in (12)
  • 0.2188 in (3)
  • 0.2362 in (20)
  • 0.25 in (22)
  • 0.2813 in (3)
  • 0.3125 in (12)
  • 0.315 in (20)
  • 0.375 in (44)
  • 0.3937 in (34)
  • 0.4375 in (10)
  • 0.4724 in (40)
  • 0.5 in (66)
  • 0.5512 in (10)
  • 0.625 in (48)
  • 0.6299 in (45)
  • 0.7087 in (8)
  • 0.75 in (58)
  • 0.7874 in (45)
  • 0.9843 in (43)
  • 1.0 in (56)
  • 1.25 in (10)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.588 mm (2)
  • 1.984 mm (1)
  • 2.0 mm (12)
  • 2.381 mm (2)
  • 2.5 mm (10)
  • 2.778 mm (1)
  • 3.0 mm (12)
  • 3.175 mm (10)
  • 3.5 mm (10)
  • 3.9688 mm (1)
  • 3.969 mm (2)
  • 4.0 mm (20)
  • 4.7625 mm (4)
  • 4.763 mm (6)
  • 5.0 mm (12)
  • 5.556 mm (2)
  • 5.5563 mm (1)
  • 6.0 mm (20)
  • 6.35 mm (22)
  • 7.1438 mm (1)
  • 7.144 mm (2)
  • 7.9375 mm (6)
  • 7.938 mm (6)
  • 8.0 mm (20)
  • 9.525 mm (44)
  • 10.0 mm (34)
  • 11.1125 mm (2)
  • 11.113 mm (8)
  • 12.0 mm (40)
  • 12.7 mm (66)
  • 14.0 mm (10)
  • 15.875 mm (48)
  • 16.0 mm (45)
  • 18.0 mm (8)
  • 19.05 mm (58)
  • 20.0 mm (45)
  • 25.0 mm (43)
  • 25.4 mm (56)
  • 31.75 mm (10)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 7.9375 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.3125 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 2.0 mm (1)
  • 3.0 mm (1)
  • 3.175 mm (2)
  • 3.969 mm (1)
  • 4.0 mm (5)
  • 4.763 mm (2)
  • 5.0 mm (8)
  • 6.0 mm (19)
  • 6.35 mm (6)
  • 7.0 mm (6)
  • 7.938 mm (2)
  • 8.0 mm (12)
  • 9.0 mm (8)
  • 9.525 mm (11)
  • 10.0 mm (10)
  • 11.0 mm (8)
  • 11.1125 mm (2)
  • 11.113 mm (4)
  • 12.0 mm (11)
  • 12.7 mm (27)
  • 13.0 mm (17)
  • 14.0 mm (4)
  • 15.0 mm (11)
  • 15.875 mm (27)
  • 16.0 mm (11)
  • 18.0 mm (14)
  • 19.0 mm (4)
  • 19.05 mm (29)
  • 20.0 mm (2)
  • 20.6375 mm (3)
  • 22.0 mm (22)
  • 22.225 mm (22)
  • 24.0 mm (16)
  • 25.0 mm (1)
  • 25.4 mm (52)
  • 26.0 mm (34)
  • 28.575 mm (8)
  • 30.0 mm (17)
  • 31.75 mm (32)
  • 32.0 mm (29)
  • 35.0 mm (2)
  • 37.5 mm (12)
  • 38.0 mm (27)
  • 38.1 mm (49)
  • 40.0 mm (1)
  • 44.45 mm (2)
  • 45.0 mm (27)
  • 50.0 mm (1)
  • 50.8 mm (6)
  • 57.15 mm (40)
  • 66.675 mm (2)
  • 76.2 mm (22)
  • 82.55 mm (2)
  • 101.6 mm (8)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.0787 in (1)
  • 0.1181 in (1)
  • 0.125 in (2)
  • 0.1563 in (1)
  • 0.1575 in (5)
  • 0.1875 in (2)
  • 0.1969 in (8)
  • 0.2362 in (19)
  • 0.25 in (6)
  • 0.2756 in (6)
  • 0.3125 in (2)
  • 0.315 in (12)
  • 0.3543 in (8)
  • 0.375 in (11)
  • 0.3937 in (10)
  • 0.4331 in (8)
  • 0.4375 in (6)
  • 0.4724 in (11)
  • 0.5 in (27)
  • 0.5118 in (17)
  • 0.5512 in (4)
  • 0.5906 in (11)
  • 0.625 in (27)
  • 0.6299 in (11)
  • 0.7087 in (14)
  • 0.748 in (4)
  • 0.75 in (29)
  • 0.7874 in (2)
  • 0.8125 in (3)
  • 0.8661 in (22)
  • 0.875 in (22)
  • 0.9449 in (16)
  • 0.9843 in (1)
  • 1.0 in (52)
  • 1.0236 in (34)
  • 1.125 in (8)
  • 1.1811 in (17)
  • 1.25 in (32)
  • 1.2598 in (29)
  • 1.378 in (2)
  • 1.4764 in (12)
  • 1.4961 in (27)
  • 1.5 in (49)
  • 1.5748 in (1)
  • 1.75 in (2)
  • 1.7717 in (27)
  • 1.9685 in (1)
  • 2.0 in (6)
  • 2.25 in (40)
  • 2.625 in (2)
  • 3.0 in (22)
  • 3.25 in (2)
  • 4.0 in (8)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.2362 in (1)
  • 0.25 in (4)
  • 0.3125 in (2)
  • 0.315 in (1)
  • 0.375 in (6)
  • 0.3937 in (1)
  • 0.4375 in (6)
  • 0.4724 in (7)
  • 0.5 in (18)
  • 0.5118 in (4)
  • 0.5906 in (4)
  • 0.625 in (17)
  • 0.6299 in (11)
  • 0.6496 in (4)
  • 0.7087 in (12)
  • 0.75 in (16)
  • 0.7874 in (1)
  • 0.8125 in (3)
  • 0.8661 in (2)
  • 0.875 in (20)
  • 0.9449 in (9)
  • 1.0 in (33)
  • 1.0236 in (4)
  • 1.1811 in (14)
  • 1.25 in (32)
  • 1.2598 in (9)
  • 1.4173 in (14)
  • 1.4961 in (2)
  • 1.5 in (44)
  • 1.5748 in (5)
  • 1.6535 in (4)
  • 1.7717 in (2)
  • 1.8898 in (16)
  • 2.0 in (14)
  • 2.0866 in (18)
  • 2.126 in (2)
  • 2.25 in (66)
  • 2.2835 in (12)
  • 2.3622 in (16)
  • 2.874 in (42)
  • 2.9528 in (37)
  • 3.0 in (22)
  • 3.25 in (16)
  • 4.0 in (8)
Reach Min to Reach Max
Reach
Reach
  • 6.0 mm (1)
  • 6.35 mm (4)
  • 7.938 mm (2)
  • 8.0 mm (1)
  • 9.525 mm (6)
  • 10.0 mm (1)
  • 11.1125 mm (2)
  • 11.113 mm (4)
  • 12.0 mm (7)
  • 12.7 mm (18)
  • 13.0 mm (4)
  • 15.0 mm (4)
  • 15.875 mm (17)
  • 16.0 mm (11)
  • 16.5 mm (4)
  • 18.0 mm (12)
  • 19.05 mm (16)
  • 20.0 mm (1)
  • 20.6375 mm (3)
  • 22.0 mm (2)
  • 22.225 mm (20)
  • 24.0 mm (9)
  • 25.4 mm (33)
  • 26.0 mm (4)
  • 30.0 mm (14)
  • 31.75 mm (32)
  • 32.0 mm (9)
  • 36.0 mm (14)
  • 38.0 mm (2)
  • 38.1 mm (44)
  • 40.0 mm (5)
  • 42.0 mm (4)
  • 45.0 mm (2)
  • 48.0 mm (16)
  • 50.8 mm (14)
  • 53.0 mm (18)
  • 54.0 mm (2)
  • 57.15 mm (66)
  • 58.0 mm (12)
  • 60.0 mm (16)
  • 73.0 mm (42)
  • 75.0 mm (37)
  • 76.2 mm (22)
  • 82.55 mm (16)
  • 101.6 mm (8)
Reach Min to Reach Max
Connection Style
Connection Style
  • SAFE-LOCK (27)
  • Straight-Cylindrical (384)
  • Weldon (291)
cornerConfiguration
Corner Style
Corner Style
  • BALL NOSE (50)
  • CHAMFER (137)
  • RADIUS (394)
  • SQUARE END (121)
Corner Radius
Corner Radius
  • 0.0 in (258)
  • 0.0098 in (4)
  • 0.01 in (7)
  • 0.015 in (32)
  • 0.0197 in (36)
  • 0.03 in (60)
  • 0.0313 in (1)
  • 0.0394 in (34)
  • 0.0469 in (1)
  • 0.0591 in (2)
  • 0.06 in (55)
  • 0.0625 in (2)
  • 0.0787 in (26)
  • 0.09 in (33)
  • 0.0938 in (2)
  • 0.0984 in (16)
  • 0.1181 in (26)
  • 0.12 in (28)
  • 0.125 in (2)
  • 0.1563 in (2)
  • 0.1575 in (26)
  • 0.1875 in (2)
  • 0.1969 in (2)
  • 0.2188 in (2)
  • 0.2362 in (17)
  • 0.25 in (10)
  • 0.3125 in (4)
  • 0.315 in (2)
  • 0.375 in (4)
  • 0.3937 in (2)
  • 0.5 in (4)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (258)
  • 0.25 mm (4)
  • 0.254 mm (7)
  • 0.381 mm (32)
  • 0.5 mm (36)
  • 0.762 mm (60)
  • 0.794 mm (1)
  • 1.0 mm (34)
  • 1.191 mm (1)
  • 1.5 mm (2)
  • 1.524 mm (55)
  • 1.588 mm (2)
  • 2.0 mm (26)
  • 2.286 mm (33)
  • 2.381 mm (2)
  • 2.5 mm (16)
  • 3.0 mm (26)
  • 3.048 mm (28)
  • 3.175 mm (2)
  • 3.969 mm (2)
  • 4.0 mm (26)
  • 4.763 mm (2)
  • 5.0 mm (2)
  • 5.556 mm (2)
  • 6.0 mm (17)
  • 6.35 mm (10)
  • 7.938 mm (4)
  • 8.0 mm (2)
  • 9.525 mm (4)
  • 10.0 mm (2)
  • 12.7 mm (4)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (565)
  • 0.1 mm (16)
  • 0.15 mm (12)
  • 0.2 mm (12)
  • 0.25 mm (8)
  • 0.3 mm (4)
  • 0.35 mm (14)
  • 0.381 mm (11)
  • 0.4 mm (8)
  • 0.5 mm (14)
  • 0.508 mm (38)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (565)
  • 0.0039 in (16)
  • 0.0059 in (12)
  • 0.0079 in (12)
  • 0.0098 in (8)
  • 0.0118 in (4)
  • 0.0138 in (14)
  • 0.015 in (11)
  • 0.0157 in (8)
  • 0.0197 in (14)
  • 0.02 in (38)
Corner Chamfer Min to Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • KCPM15 (308)
  • KCSM15 (394)
Maximum Ramp Angle
Maximum Ramp Angle
  • 10.0 (228)
  • 45.0 (318)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.111 in (5)
  • 0.1295 in (4)
  • 0.148 in (13)
  • 0.185 in (5)
  • 0.222 in (13)
  • 0.235 in (4)
  • 0.2961 in (13)
  • 0.3525 in (8)
  • 0.3701 in (27)
  • 0.4441 in (33)
  • 0.47 in (10)
  • 0.5181 in (4)
  • 0.5875 in (10)
  • 0.5921 in (38)
  • 0.6661 in (2)
  • 0.705 in (16)
  • 0.7402 in (38)
  • 0.94 in (8)
  • 0.9449 in (37)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 2.82 mm (5)
  • 3.29 mm (4)
  • 3.76 mm (13)
  • 4.7 mm (5)
  • 5.64 mm (13)
  • 5.969 mm (4)
  • 7.52 mm (13)
  • 8.954 mm (8)
  • 9.4 mm (27)
  • 11.28 mm (33)
  • 11.938 mm (10)
  • 13.16 mm (4)
  • 14.922 mm (10)
  • 15.04 mm (38)
  • 16.92 mm (2)
  • 17.907 mm (16)
  • 18.8 mm (38)
  • 23.876 mm (8)
  • 24.0 mm (37)
Neck Diameter Min to Neck Diameter Max
backEnd
Back-End Diameter
Back-End Diameter
  • 3.175 mm (16)
  • 4.0 mm (6)
  • 4.7625 mm (5)
  • 4.763 mm (8)
  • 6.0 mm (90)
  • 6.35 mm (25)
  • 7.9375 mm (7)
  • 7.938 mm (8)
  • 8.0 mm (20)
  • 9.525 mm (44)
  • 10.0 mm (34)
  • 11.1125 mm (2)
  • 11.113 mm (8)
  • 12.0 mm (40)
  • 12.7 mm (66)
  • 14.0 mm (10)
  • 15.875 mm (48)
  • 16.0 mm (45)
  • 18.0 mm (8)
  • 19.05 mm (58)
  • 20.0 mm (45)
  • 25.0 mm (43)
  • 25.4 mm (56)
  • 31.75 mm (10)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.125 in (16)
  • 0.1575 in (6)
  • 0.1875 in (13)
  • 0.2362 in (90)
  • 0.25 in (25)
  • 0.3125 in (15)
  • 0.315 in (20)
  • 0.375 in (44)
  • 0.3937 in (34)
  • 0.4375 in (10)
  • 0.4724 in (40)
  • 0.5 in (66)
  • 0.5512 in (10)
  • 0.625 in (48)
  • 0.6299 in (45)
  • 0.7087 in (8)
  • 0.75 in (58)
  • 0.7874 in (45)
  • 0.9843 in (43)
  • 1.0 in (56)
  • 1.25 in (10)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Karbidové stopkové frézy

Čtyřbřité stopkové frézy HARVI™ I TE pro hrubování a dokončování pokrývají nejširší rozsah aplikací a materiálů.
(14 Products)
  • PocketingPocketing
  • Tool Dimensions: Flute Configuration: 4Tool Dimensions: Flute Configuration: 4
  • Side Milling/Shoulder Milling: Eased ChamferSide Milling/Shoulder Milling: Eased Chamfer
  • Trochoidal MillingTrochoidal Milling
  • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
  • Helical MillingHelical Milling
  • Slotting: Square EndSlotting: Square End
  • Plunge MillingPlunge Milling
  • Ramping: BlankRamping: Blank
  • Shank - Cylindrical  WeldonShank - Cylindrical Weldon
  • Corner Style: Corner ChamferCorner Style: Corner Chamfer
  • 100147465100147465
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D3] Neck Diameter [D3] Neck Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L3] Usable Length [L3] Usable Length [L] Overall Length [L] Overall Length [BCH] Corner Chamfer Width [BCH] Corner Chamfer Width [Z] Number of Flutes
6676309 H1TE4CH0400N011HBM H1TE4CH0400N011HBM KCPM15 Weldon 4.0000 .1575 6.0 .2362 3.7600 .1480 11.0000 .4331 16.0000 .6299 57.0000 2.244 0.1500 .0059 4  
    List price:
    $57.77 /each.
    Your price::
    Qty
    6676331 H1TE4CH0500N013HBM H1TE4CH0500N013HBM KCPM15   Weldon 5.0000 .1969 6.0 .2362 4.7000 .1850 13.0000 .5118 18.0000 .7087 57.0000 2.244 0.1500 .0059 4
      List price:
      $57.75 /each.
      Your price::
      Qty
      6676333 H1TE4CH0600N013HBM H1TE4CH0600N013HBM KCPM15 Weldon 6.0000 .2362 6.0 .2362 5.6400 .2220 13.0000 .5118 18.0000 .7087 57.0000 2.244 0.1500 .0059 4  
        List price:
        $57.75 /each.
        Your price::
        Qty
        6676341 H1TE4CH1400N026HBM H1TE4CH1400N026HBM KCPM15 Weldon 14.0000 .5512 14.0 .5512 13.1600 .5181 26.0000 1.023 42.0000 1.653 83.0000 3.267