Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Malé díly a soustružení švýcarského typu

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (348)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(281)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(281)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(281)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(281)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(281)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(348)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(348)
    • M Stainless Steel (327)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(327)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(327)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(327)
    • K Cast Iron (144)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(144)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(144)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(144)
    • N Non-Ferrous Materials (194)
      • N1
        Wrought Aluminum (194)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(194)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(194)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (194)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (50)
      • N6
        Carbon, Graphite Composites, CFRP (50)
      • N7
        MMC's (50)
    • S High-Temp Alloys (261)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(261)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(261)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(261)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(226)
    Applications
    Applications
    • Back BoringBack Boring (19)
    • Cross Hole DrillingCross Hole Drilling (144)
    • DrillingDrilling (144)
    • Face GroovingFace Grooving (176)
    • FacingFacing (49)
    • ID FacingID Facing (437)
    • ID GroovingID Grooving (212)
    • ID Thread TurningID Thread Turning (128)
    • Inclined Exit DrillingInclined Exit Drilling (144)
    • TRN BoringTRN Boring (453)
    • ThreadingThreading (128)
    • TurningTurning (49)
    Cutting Diameter
    Cutting Diameter
    • 0.02 in(2)
    • 0.024 in(2)
    • 0.028 in(2)
    • 0.031 in(3)
    • 0.035 in(3)
    • 0.039 in(8)
    • 0.044 in(8)
    • 0.047 in(8)
    • 0.052 in(8)
    • 0.055 in(8)
    • 0.06 in(8)
    • 0.063 in(8)
    • 0.067 in(8)
    • 0.072 in(8)
    • 0.075 in(8)
    • 0.079 in(8)
    • 0.083 in(8)
    • 0.088 in(8)
    • 0.091 in(8)
    • 0.095 in(8)
    • 0.098 in(8)
    • 0.103 in(8)
    • 0.106 in(8)
    • 0.11 in(8)
    • 0.114 in(8)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.5 mm(2)
    • 0.601 mm(2)
    • 0.701 mm(2)
    • 0.8 mm(3)
    • 0.9 mm(3)
    • 1.0 mm(8)
    • 1.1 mm(8)
    • 1.201 mm(8)
    • 1.3 mm(8)
    • 1.401 mm(8)
    • 1.5 mm(8)
    • 1.6 mm(8)
    • 1.701 mm(8)
    • 1.8 mm(8)
    • 1.901 mm(8)
    • 2.0 mm(8)
    • 2.1 mm(8)
    • 2.2 mm(8)
    • 2.301 mm(8)
    • 2.401 mm(8)
    • 2.5 mm(8)
    • 2.6 mm(8)
    • 2.7 mm(8)
    • 2.801 mm(8)
    • 2.901 mm(8)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (55)
    • Lightly Interrupted Cut (152)
    • Smooth Cut (254)
    • Varying Depth of Cut (232)
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.601 mm(1)
    • 0.701 mm(1)
    • 0.8 mm(1)
    • 1.0 mm(1)
    • 1.1 mm(1)
    • 2.2 mm(1)
    • 2.401 mm(1)
    • 2.6 mm(2)
    • 2.801 mm(1)
    • 3.0 mm(1)
    • 3.1 mm(1)
    • 3.301 mm(1)
    • 3.5 mm(1)
    • 3.6 mm(1)
    • 3.7 mm(1)
    • 3.901 mm(1)
    • 4.101 mm(1)
    • 4.2 mm(1)
    • 4.4 mm(1)
    • 4.601 mm(1)
    • 4.7 mm(1)
    • 4.801 mm(1)
    • 5.0 mm(1)
    • 5.2 mm(1)
    • 5.4 mm(1)
    • 5.7 mm(1)
    • 5.9 mm(1)
    • 6.101 mm(1)
    • 6.301 mm(1)
    • 7.2 mm(1)
    • 7.9 mm(1)
    • 8.6 mm(1)
    • 9.3 mm(1)
    • 9.8 mm(1)
    • 10.101 mm(1)
    • 10.8 mm(1)
    • 11.0 mm(1)
    • 11.5 mm(1)
    • 12.201 mm(2)
    • 12.9 mm(1)
    • 13.4 mm(1)
    • 13.701 mm(1)
    • 14.4 mm(1)
    • 14.601 mm(1)
    • 15.101 mm(1)
    • 15.8 mm(2)
    • 16.5 mm(1)
    • 17.1 mm(1)
    • 17.2 mm(1)
    • 18.0 mm(1)
    • 18.3 mm(1)
    • 18.7 mm(1)
    • 19.401 mm(1)
    • 19.5 mm(1)
    • 20.1 mm(1)
    • 20.201 mm(1)
    • 20.701 mm(1)
    • 20.8 mm(1)
    • 21.901 mm(1)
    • 22.201 mm(1)
    • 23.201 mm(1)
    • 24.201 mm(1)
    • 24.401 mm(1)
    • 25.201 mm(1)
    • 25.6 mm(1)
    • 26.201 mm(1)
    • 26.8 mm(1)
    • 27.701 mm(1)
    • 28.0 mm(1)
    • 28.3 mm(1)
    • 29.201 mm(1)
    • 30.201 mm(2)
    • 30.3 mm(1)
    • 30.5 mm(1)
    • 31.701 mm(1)
    • 32.301 mm(1)
    • 32.7 mm(1)
    • 32.9 mm(1)
    • 33.2 mm(1)
    • 34.1 mm(1)
    • 34.301 mm(1)
    • 35.301 mm(2)
    • 36.2 mm(1)
    • 36.301 mm(1)
    • 37.801 mm(1)
    • 38.401 mm(1)
    • 39.2 mm(1)
    • 40.2 mm(1)
    • 40.301 mm(1)
    • 40.401 mm(1)
    • 42.301 mm(1)
    • 42.401 mm(1)
    • 42.801 mm(1)
    • 44.2 mm(1)
    • 44.401 mm(1)
    • 45.301 mm(2)
    • 46.401 mm(1)
    • 47.901 mm(1)
    • 48.2 mm(1)
    • 48.301 mm(1)
    • 48.401 mm(1)
    • 50.2 mm(1)
    • 50.401 mm(1)
    • 50.5 mm(1)
    • 51.301 mm(1)
    • 52.2 mm(1)
    • 52.5 mm(1)
    • 52.901 mm(1)
    • 54.301 mm(1)
    • 54.5 mm(1)
    • 55.2 mm(1)
    • 55.401 mm(1)
    • 56.301 mm(1)
    • 56.5 mm(1)
    • 57.401 mm(1)
    • 57.901 mm(1)
    • 58.5 mm(1)
    • 60.2 mm(1)
    • 60.301 mm(1)
    • 60.401 mm(2)
    • 63.0 mm(1)
    • 63.401 mm(1)
    • 64.3 mm(1)
    • 65.2 mm(1)
    • 65.5 mm(1)
    • 66.4 mm(1)
    • 68.0 mm(1)
    • 68.3 mm(1)
    • 69.4 mm(1)
    • 70.3 mm(1)
    • 70.5 mm(1)
    • 72.3 mm(1)
    • 72.4 mm(1)
    • 73.0 mm(1)
    • 75.3 mm(1)
    • 75.5 mm(1)
    • 76.4 mm(1)
    • 78.5 mm(1)
    • 80.301 mm(1)
    • 80.4 mm(1)
    • 81.5 mm(1)
    • 84.4 mm(1)
    • 84.5 mm(1)
    • 85.301 mm(1)
    • 87.5 mm(1)
    • 88.4 mm(1)
    • 90.301 mm(1)
    • 92.4 mm(1)
    • 95.4 mm(1)
    • 96.4 mm(1)
    • 100.4 mm(1)
    • 100.5 mm(1)
    • 104.5 mm(1)
    • 105.4 mm(1)
    • 108.5 mm(1)
    • 110.4 mm(1)
    • 112.5 mm(1)
    • 115.4 mm(1)
    • 116.5 mm(1)
    • 120.4 mm(1)
    • 125.5 mm(1)
    • 130.5 mm(1)
    • 135.5 mm(1)
    • 140.5 mm(1)
    • 145.5 mm(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.024 in(1)
    • 0.028 in(1)
    • 0.031 in(1)
    • 0.039 in(1)
    • 0.044 in(1)
    • 0.088 in(1)
    • 0.095 in(1)
    • 0.103 in(2)
    • 0.11 in(1)
    • 0.119 in(1)
    • 0.122 in(1)
    • 0.13 in(1)
    • 0.138 in(1)
    • 0.143 in(1)
    • 0.146 in(1)
    • 0.154 in(1)
    • 0.161 in(1)
    • 0.165 in(1)
    • 0.174 in(1)
    • 0.181 in(1)
    • 0.185 in(1)
    • 0.189 in(1)
    • 0.197 in(1)
    • 0.206 in(1)
    • 0.213 in(1)
    • 0.224 in(1)
    • 0.232 in(1)
    • 0.24 in(1)
    • 0.248 in(1)
    • 0.284 in(1)
    • 0.311 in(1)
    • 0.339 in(1)
    • 0.366 in(1)
    • 0.386 in(1)
    • 0.398 in(1)
    • 0.425 in(1)
    • 0.433 in(1)
    • 0.453 in(1)
    • 0.48 in(2)
    • 0.508 in(1)
    • 0.528 in(1)
    • 0.539 in(1)
    • 0.568 in(1)
    • 0.576 in(1)
    • 0.595 in(1)
    • 0.622 in(2)
    • 0.65 in(1)
    • 0.673 in(1)
    • 0.677 in(1)
    • 0.709 in(1)
    • 0.72 in(1)
    • 0.736 in(1)
    • 0.764 in(1)
    • 0.768 in(1)
    • 0.791 in(1)
    • 0.795 in(1)
    • 0.816 in(1)
    • 0.82 in(1)
    • 0.862 in(1)
    • 0.874 in(1)
    • 0.913 in(1)
    • 0.954 in(1)
    • 0.961 in(1)
    • 0.992 in(1)
    • 1.008 in(1)
    • 1.032 in(1)
    • 1.055 in(1)
    • 1.091 in(1)
    • 1.102 in(1)
    • 1.114 in(1)
    • 1.151 in(1)
    • 1.189 in(2)
    • 1.193 in(1)
    • 1.201 in(1)
    • 1.248 in(1)
    • 1.272 in(1)
    • 1.287 in(1)
    • 1.295 in(1)
    • 1.307 in(1)
    • 1.343 in(1)
    • 1.35 in(1)
    • 1.391 in(2)
    • 1.425 in(1)
    • 1.429 in(1)
    • 1.488 in(1)
    • 1.512 in(1)
    • 1.543 in(1)
    • 1.583 in(1)
    • 1.587 in(1)
    • 1.591 in(1)
    • 1.665 in(1)
    • 1.669 in(1)
    • 1.685 in(1)
    • 1.74 in(1)
    • 1.748 in(1)
    • 1.784 in(2)
    • 1.827 in(1)
    • 1.887 in(1)
    • 1.899 in(1)
    • 1.903 in(1)
    • 1.907 in(1)
    • 1.976 in(1)
    • 1.984 in(1)
    • 1.988 in(1)
    • 2.02 in(1)
    • 2.055 in(1)
    • 2.067 in(1)
    • 2.083 in(1)
    • 2.138 in(1)
    • 2.146 in(1)
    • 2.173 in(1)
    • 2.181 in(1)
    • 2.217 in(1)
    • 2.224 in(1)
    • 2.261 in(1)
    • 2.281 in(1)
    • 2.303 in(1)
    • 2.37 in(1)
    • 2.374 in(1)
    • 2.378 in(2)
    • 2.48 in(1)
    • 2.496 in(1)
    • 2.531 in(1)
    • 2.567 in(1)
    • 2.579 in(1)
    • 2.614 in(1)
    • 2.677 in(1)
    • 2.689 in(1)
    • 2.732 in(1)
    • 2.769 in(1)
    • 2.777 in(1)
    • 2.846 in(1)
    • 2.85 in(1)
    • 2.874 in(1)
    • 2.965 in(1)
    • 2.972 in(1)
    • 3.008 in(1)
    • 3.091 in(1)
    • 3.161 in(1)
    • 3.165 in(1)
    • 3.209 in(1)
    • 3.323 in(1)
    • 3.327 in(1)
    • 3.358 in(1)
    • 3.446 in(1)
    • 3.48 in(1)
    • 3.555 in(1)
    • 3.638 in(1)
    • 3.757 in(1)
    • 3.795 in(1)
    • 3.954 in(1)
    • 3.958 in(1)
    • 4.114 in(1)
    • 4.15 in(1)
    • 4.272 in(1)
    • 4.346 in(1)
    • 4.429 in(1)
    • 4.543 in(1)
    • 4.587 in(1)
    • 4.74 in(1)
    • 4.941 in(1)
    • 5.138 in(1)
    • 5.335 in(1)
    • 5.531 in(1)
    • 5.728 in(1)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 0.103 in(1)
    • 0.119 in(1)
    • 0.138 in(1)
    • 0.157 in(1)
    • 0.181 in(1)
    • 0.319 in(3)
    • 0.339 in(1)
    • 0.358 in(1)
    • 0.374 in(1)
    • 0.39 in(1)
    • 0.402 in(2)
    • 0.406 in(1)
    • 0.425 in(1)
    • 0.441 in(1)
    • 0.457 in(1)
    • 0.473 in(1)
    • 0.488 in(1)
    • 0.508 in(1)
    • 0.528 in(1)
    • 0.535 in(1)
    • 0.543 in(1)
    • 0.559 in(1)
    • 0.576 in(2)
    • 0.591 in(1)
    • 0.61 in(2)
    • 0.626 in(1)
    • 0.642 in(1)
    • 0.646 in(1)
    • 0.657 in(1)
    • 0.685 in(1)
    • 0.72 in(1)
    • 0.732 in(1)
    • 0.756 in(1)
    • 0.791 in(2)
    • 0.795 in(2)
    • 0.828 in(1)
    • 0.846 in(1)
    • 0.866 in(1)
    • 0.902 in(2)
    • 0.913 in(1)
    • 0.942 in(1)
    • 0.961 in(1)
    • 0.976 in(1)
    • 1.004 in(1)
    • 1.012 in(1)
    • 1.016 in(1)
    • 1.047 in(1)
    • 1.071 in(1)
    • 1.087 in(1)
    • 1.094 in(1)
    • 1.11 in(1)
    • 1.122 in(1)
    • 1.127 in(1)
    • 1.158 in(1)
    • 1.181 in(1)
    • 1.185 in(1)
    • 1.193 in(1)
    • 1.22 in(1)
    • 1.228 in(1)
    • 1.24 in(1)
    • 1.28 in(1)
    • 1.295 in(1)
    • 1.307 in(1)
    • 1.331 in(1)
    • 1.354 in(1)
    • 1.37 in(1)
    • 1.409 in(1)
    • 1.437 in(1)
    • 1.441 in(1)
    • 1.461 in(1)
    • 1.465 in(1)
    • 1.52 in(1)
    • 1.551 in(1)
    • 1.555 in(1)
    • 1.567 in(1)
    • 1.579 in(1)
    • 1.635 in(1)
    • 1.643 in(1)
    • 1.665 in(1)
    • 1.689 in(1)
    • 1.697 in(1)
    • 1.701 in(1)
    • 1.736 in(1)
    • 1.744 in(1)
    • 1.776 in(1)
    • 1.799 in(1)
    • 1.827 in(1)
    • 1.831 in(1)
    • 1.87 in(1)
    • 1.887 in(1)
    • 1.917 in(1)
    • 1.961 in(1)
    • 1.996 in(1)
    • 2.008 in(1)
    • 2.039 in(1)
    • 2.091 in(1)
    • 2.094 in(1)
    • 2.098 in(1)
    • 2.11 in(1)
    • 2.189 in(1)
    • 2.209 in(1)
    • 2.221 in(2)
    • 2.283 in(1)
    • 2.303 in(1)
    • 2.331 in(1)
    • 2.35 in(1)
    • 2.374 in(1)
    • 2.382 in(1)
    • 2.441 in(1)
    • 2.465 in(1)
    • 2.484 in(1)
    • 2.512 in(1)
    • 2.551 in(2)
    • 2.555 in(1)
    • 2.614 in(1)
    • 2.646 in(1)
    • 2.661 in(1)
    • 2.721 in(2)
    • 2.744 in(1)
    • 2.777 in(1)
    • 2.874 in(1)
    • 2.886 in(1)
    • 2.89 in(1)
    • 2.934 in(1)
    • 2.996 in(1)
    • 3.004 in(1)
    • 3.059 in(1)
    • 3.106 in(1)
    • 3.134 in(1)
    • 3.142 in(1)
    • 3.217 in(1)
    • 3.232 in(1)
    • 3.269 in(1)
    • 3.35 in(1)
    • 3.398 in(1)
    • 3.402 in(1)
    • 3.528 in(1)
    • 3.559 in(1)
    • 3.571 in(1)
    • 3.657 in(1)
    • 3.74 in(1)
    • 3.769 in(1)
    • 3.787 in(1)
    • 3.91 in(1)
    • 3.98 in(1)
    • 4.079 in(1)
    • 4.189 in(1)
    • 4.252 in(1)
    • 4.398 in(1)
    • 4.421 in(1)
    • 4.591 in(1)
    • 4.606 in(1)
    • 4.76 in(1)
    • 4.815 in(1)
    • 4.929 in(1)
    • 5.024 in(1)
    • 5.236 in(1)
    • 5.445 in(1)
    • 7.736 in(3)
    Reach MinkomuReach Max
    Reach
    Reach
    • 2.6 mm(1)
    • 3.0 mm(1)
    • 3.5 mm(1)
    • 4.0 mm(1)
    • 4.601 mm(1)
    • 8.1 mm(3)
    • 8.6 mm(1)
    • 9.1 mm(1)
    • 9.5 mm(1)
    • 9.9 mm(1)
    • 10.201 mm(2)
    • 10.3 mm(1)
    • 10.8 mm(1)
    • 11.201 mm(1)
    • 11.601 mm(1)
    • 12.0 mm(1)
    • 12.4 mm(1)
    • 12.9 mm(1)
    • 13.4 mm(1)
    • 13.601 mm(1)
    • 13.8 mm(1)
    • 14.201 mm(1)
    • 14.601 mm(2)
    • 15.0 mm(1)
    • 15.5 mm(2)
    • 15.9 mm(1)
    • 16.3 mm(1)
    • 16.401 mm(1)
    • 16.7 mm(1)
    • 17.401 mm(1)
    • 18.3 mm(1)
    • 18.6 mm(1)
    • 19.201 mm(1)
    • 20.1 mm(2)
    • 20.201 mm(2)
    • 21.0 mm(1)
    • 21.5 mm(1)
    • 22.0 mm(1)
    • 22.901 mm(2)
    • 23.201 mm(1)
    • 23.901 mm(1)
    • 24.401 mm(1)
    • 24.8 mm(1)
    • 25.5 mm(1)
    • 25.701 mm(1)
    • 25.8 mm(1)
    • 26.6 mm(1)
    • 27.201 mm(1)
    • 27.6 mm(1)
    • 27.8 mm(1)
    • 28.201 mm(1)
    • 28.5 mm(1)
    • 28.6 mm(1)
    • 29.401 mm(1)
    • 30.0 mm(1)
    • 30.1 mm(1)
    • 30.3 mm(1)
    • 31.0 mm(1)
    • 31.201 mm(1)
    • 31.5 mm(1)
    • 32.5 mm(1)
    • 32.9 mm(1)
    • 33.2 mm(1)
    • 33.801 mm(1)
    • 34.4 mm(1)
    • 34.801 mm(1)
    • 35.801 mm(1)
    • 36.5 mm(1)
    • 36.6 mm(1)
    • 37.1 mm(1)
    • 37.2 mm(1)
    • 38.6 mm(1)
    • 39.401 mm(1)
    • 39.5 mm(1)
    • 39.801 mm(1)
    • 40.1 mm(1)
    • 41.5 mm(1)
    • 41.7 mm(1)
    • 42.301 mm(1)
    • 42.901 mm(1)
    • 43.1 mm(1)
    • 43.2 mm(1)
    • 44.1 mm(1)
    • 44.301 mm(1)
    • 45.1 mm(1)
    • 45.7 mm(1)
    • 46.401 mm(1)
    • 46.5 mm(1)
    • 47.5 mm(1)
    • 47.901 mm(1)
    • 48.7 mm(1)
    • 49.801 mm(1)
    • 50.7 mm(1)
    • 51.0 mm(1)
    • 51.801 mm(1)
    • 53.1 mm(1)
    • 53.2 mm(1)
    • 53.301 mm(1)
    • 53.6 mm(1)
    • 55.6 mm(1)
    • 56.1 mm(1)
    • 56.401 mm(2)
    • 58.0 mm(1)
    • 58.5 mm(1)
    • 59.2 mm(1)
    • 59.7 mm(1)
    • 60.301 mm(1)
    • 60.5 mm(1)
    • 62.0 mm(1)
    • 62.6 mm(1)
    • 63.1 mm(1)
    • 63.801 mm(1)
    • 64.8 mm(2)
    • 64.9 mm(1)
    • 66.4 mm(1)
    • 67.2 mm(1)
    • 67.601 mm(1)
    • 69.101 mm(2)
    • 69.7 mm(1)
    • 70.5 mm(1)
    • 73.0 mm(1)
    • 73.3 mm(1)
    • 73.4 mm(1)
    • 74.5 mm(1)
    • 76.101 mm(1)
    • 76.3 mm(1)
    • 77.7 mm(1)
    • 78.9 mm(1)
    • 79.601 mm(1)
    • 79.801 mm(1)
    • 81.7 mm(1)
    • 82.101 mm(1)
    • 83.0 mm(1)
    • 85.101 mm(1)
    • 86.301 mm(1)
    • 86.4 mm(1)
    • 89.601 mm(1)
    • 90.4 mm(1)
    • 90.7 mm(1)
    • 92.9 mm(1)
    • 95.0 mm(1)
    • 95.7 mm(1)
    • 96.2 mm(1)
    • 99.301 mm(1)
    • 101.101 mm(1)
    • 103.601 mm(1)
    • 106.4 mm(1)
    • 108.0 mm(1)
    • 111.7 mm(1)
    • 112.301 mm(1)
    • 116.601 mm(1)
    • 117.0 mm(1)
    • 120.9 mm(1)
    • 122.301 mm(1)
    • 125.2 mm(1)
    • 127.601 mm(1)
    • 133.0 mm(1)
    • 138.3 mm(1)
    • 196.5 mm(3)
    Reach MinkomuReach Max