Kenloc™ • M-Style Clamping • For Negative Style Inserts
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (121)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(121)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(121)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(121)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(121)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(121)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(121)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(121)
- M Stainless Steel (121)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(121)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(121)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(121)
- K Cast Iron (121)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(121)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(121)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(121)
- N Non-Ferrous Materials (113)
- N1Wrought Aluminum (113)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(113)
- N3High-Silicon Aluminum Alloys Si >12.2%(81)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (113)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (113)
- N6Carbon, Graphite Composites, CFRP (113)
- N7MMC's (113)
- S High-Temp Alloys (121)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(121)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(121)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(121)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(121)
- H Hardened Materials (112)
- H1Hardened Materials 44-48 HRC(112)
- H2Hardened Materials 48-55 HRC(112)
- H3Hardened Materials 56-60 HRC(112)
- H4Hardened Materials >60 HRC(90)
Applications
Applications
Back Boring (11)
Chamfer Turning (6)
Facing (5)
ID Facing (5)
Multiple Direction Cutting (96)
Profiling (90)
TRN Boring (121)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (121)
- Lightly Interrupted Cut (121)
- Smooth Cut (121)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 62.5 (3)
- 75.0 (6)
- 90.0 (13)
- 91.0 (1)
- 93.0 (32)
- 95.0 (62)
- 107.5 (4)
komu
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (81)
- 2.0 (85)
- 3.0 (28)
- 4.0 (89)
- 6.0 (32)
- 8.0 (49)
komu
Over All Length [L]
Over All Length [L]
- 200.0 mm(12)
- 250.0 mm(8)
- 251.45 mm(1)
- 254.0 mm(1)
- 300.0 mm(10)
- 301.6 mm(1)
- 304.8 mm(13)
- 350.0 mm(9)
- 351.8 mm(2)
- 355.6 mm(44)
- 406.4 mm(20)
komu
Corner Radius
Corner Radius
- 0.1 mm(79)
- 0.2 mm(84)
- 0.35 mm(7)
- 0.4 mm(116)
- 0.6 mm(16)
- 0.8 mm(121)
- 1.2 mm(120)
- 1.6 mm(101)
- 2.375 mm(11)
- 2.4 mm(19)
- 3.175 mm(3)
- 3.2 mm(3)
- 4.0 mm(1)
komu
Corner Radius
Corner Radius
- 0.004 in(79)
- 0.008 in(84)
- 0.014 in(7)
- 0.016 in(116)
- 0.024 in(16)
- 0.031 in(121)
- 0.047 in(120)
- 0.063 in(101)
- 0.094 in(19)
- 0.125 in(3)
- 0.126 in(3)
- 0.157 in(1)
komu
application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K060 (31)
- K090 (6)
- K1 (1)
- K313 (113)
- K68 (97)
- KB1340 (36)
- KB1345 (57)
- KB1610 (83)
- KB1630 (65)
- KB5610 (56)
- KB5630 (56)
- KBH10 (90)
- KBH10B (90)
- KBH20 (90)
- KBH20B (90)
- KC5010 (121)
- KC5025 (120)
- KC5410 (107)
- KC730 (106)
- KC850 (113)
- KC9125 (4)
- KCK05 (109)
- KCK05B (58)
- KCK15 (115)
- KCK15B (115)
- KCK20 (112)
- KCK20B (115)
- KCM15 (112)
- KCM15B (116)
- KCM25 (117)
- KCM25B (116)
- KCM35 (109)
- KCM35B (80)
- KCP05 (93)
- KCP05B (100)
- KCP10 (121)
- KCP10B (121)
- KCP10C (121)
- KCP25 (117)
- KCP25B (120)
- KCP25C (121)
- KCP30 (121)
- KCP30B (98)
- KCP40 (105)
- KCP40B (110)
- KCPK05 (109)
- KCS10 (31)
- KCS10B (113)
- KCU10 (121)
- KCU10B (121)
- KCU25 (120)
- KCU25B (120)
- KD1400 (65)
- KD1405 (56)
- KD1425 (81)
- KS15 (31)
- KT315 (97)
- KT325 (31)
- KTP10 (97)
- KTP25S (88)
- KY1540 (31)
- KY3500 (106)
- KY4300 (63)
- KY4400 (97)
- KYHK15B (112)
- KYK10 (59)
- KYK25 (85)
- KYS25 (33)
- KYS30 (66)
- SP4019 (31)
- X00580 (31)
- X00581 (31)
- X00582 (31)
- X00583 (31)
- X00584 (31)
- X00585 (31)
- X00586 (31)
- X00591 (31)
- X00592 (31)
- X00593 (31)
- X00594 (31)
- X00596 (31)
- X00597 (31)
- X00599 (31)
Hand Of Tool
Hand Of Tool
- L (42)
- R (79)
Wiper Insert
Wiper Insert
- N (121)
- Y (71)
F Dimension
F Dimension
- 16.256 mm(4)
- 16.26 mm(8)
- 17.0 mm(10)
- 19.05 mm(2)
- 19.43 mm(5)
- 19.431 mm(4)
- 19.44 mm(1)
- 21.875 mm(1)
- 22.0 mm(11)
- 22.48 mm(1)
- 22.606 mm(9)
- 22.61 mm(2)
- 25.4 mm(8)
- 25.781 mm(3)
- 26.875 mm(2)
- 27.0 mm(10)
- 28.575 mm(3)
- 28.58 mm(5)
- 31.75 mm(2)
- 32.41 mm(1)
- 32.537 mm(6)
- 32.54 mm(2)
- 33.655 mm(2)
- 34.798 mm(2)
- 35.0 mm(9)
- 38.887 mm(4)
- 38.8874 mm(1)
- 38.89 mm(1)
- 44.45 mm(1)
komu
Minimum Bore Diameter
Minimum Bore Diameter
- 30.48 mm(5)
- 30.99 mm(5)
- 32.0 mm(10)
- 33.02 mm(2)
- 33.274 mm(1)
- 37.0 mm(2)
- 37.34 mm(7)
- 39.37 mm(2)
- 40.0 mm(10)
- 41.275 mm(1)
- 43.307 mm(2)
- 43.31 mm(6)
- 44.7 mm(3)
- 44.704 mm(5)
- 44.96 mm(1)
- 45.974 mm(1)
- 47.625 mm(1)
- 50.0 mm(12)
- 50.8 mm(10)
- 51.054 mm(3)
- 53.975 mm(1)
- 57.15 mm(2)
- 60.96 mm(7)
- 63.0 mm(9)
- 63.5 mm(4)
- 65.837 mm(2)
- 76.96 mm(1)
- 76.962 mm(5)
- 82.55 mm(1)
komu
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 30.48 mm(5)
- 30.99 mm(5)
- 32.0 mm(10)
- 33.02 mm(2)
- 33.274 mm(1)
- 37.0 mm(2)
- 37.34 mm(7)
- 39.37 mm(2)
- 40.0 mm(10)
- 41.275 mm(1)
- 43.307 mm(2)
- 43.31 mm(6)
- 44.7 mm(3)
- 44.704 mm(5)
- 44.96 mm(1)
- 45.974 mm(1)
- 47.625 mm(1)
- 50.0 mm(12)
- 50.8 mm(10)
- 51.054 mm(3)
- 53.975 mm(1)
- 57.15 mm(2)
- 60.96 mm(7)
- 63.0 mm(9)
- 63.5 mm(4)
- 65.837 mm(2)
- 76.96 mm(1)
- 76.962 mm(5)
- 82.55 mm(1)
komu
Cutting Direction
Cutting Direction
- B (62)
- E (59)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (118)
- NEGATIVE-ZERO (3)
Maximum Bore Depth
Maximum Bore Depth
- 100.0 mm(12)
- 101.6 mm(13)
- 126.8 mm(11)
- 127.0 mm(7)
- 128.0 mm(9)
- 152.4 mm(20)
- 160.0 mm(10)
- 177.6 mm(5)
- 200.0 mm(9)
- 203.2 mm(13)
- 254.0 mm(7)
- 320.0 mm(1)
- 381.0 mm(1)
- 400.0 mm(2)
- 635.0 mm(1)
komu
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (47)
- D-DIAMOND/RHOMBIC 55 (27)
- S-SQUARE 90 (3)
- T-TRIANGLE 60 (12)
- V-DIAMOND/RHOMBIC 35 (12)
- W-TRIGON 80 (20)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (86)
- B L (90)
- C A (112)
- C N (106)
- D P (88)
- H T (97)
- H W (121)
backEnd
Back-End Diameter
Back-End Diameter
- 25.0 mm(12)
- 25.4 mm(14)
- 31.7 mm(11)
- 31.75 mm(7)
- 32.0 mm(10)
- 38.1 mm(21)
- 40.0 mm(12)
- 44.4 mm(5)
- 50.0 mm(9)
- 50.8 mm(13)
- 63.5 mm(7)
komu
Shank Height
Shank Height
- 23.82 mm(6)
- 24.232 mm(2)
- 30.582 mm(1)
- 30.82 mm(1)
- 36.932 mm(3)
- 38.82 mm(3)
- 41.402 mm(4)
- 46.96 mm(8)
- 47.752 mm(7)
- 60.452 mm(1)
komu
Shank Width
Shank Width
- 21.96 mm(6)
- 22.352 mm(2)
- 28.27 mm(1)
- 28.96 mm(1)
- 35.052 mm(3)
- 36.96 mm(3)
- 41.402 mm(4)
- 46.96 mm(8)
- 47.752 mm(7)
- 60.452 mm(1)
komu
No filters matching ""
