Přesné vnitřní soustružení

Pokud jde o vysokou přesnost a preciznost potřebnou k vytváření malých- a mikrokomponentů, nabízí TopSwiss MBS všestrannou nabídku, na kterou se můžete spolehnout při vnitřním soustružení vyšší úrovně. Ideální pro zdravotnický, letecký, automobilový průmysl a všeobecné strojírenské dílny. 

TopSwiss MBS přináší:

  • Téměř 200 nástrojových držáků ve třech úrovních přesnosti: standardní, prémiové a vysokovýkonnostní
  • Výjimečně ostré řezné hrany zajišťují špičkovou životnost nástroje a opracování povrchu
  • Pět vysoce výkonných povlaků na konkrétní materiály pro žáruvzdorné slitiny, tvrzené materiály, nerezové oceli, oceli a kompozitní materiály
  • Univerzální povlak navržený pro jednotné vlastnosti napříč různými materiály
Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (844)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(844)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(844)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(844)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(844)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(844)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(844)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(844)
    • M Stainless Steel (844)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(844)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(844)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(844)
    • K Cast Iron (844)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(844)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(844)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(844)
    • N Non-Ferrous Materials (844)
      • N1
        Wrought Aluminum (844)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(844)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(844)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (844)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (844)
      • N6
        Carbon, Graphite Composites, CFRP (844)
    • S High-Temp Alloys (844)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(844)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(844)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(844)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(844)
    • H Hardened Materials (844)
      • H1
        Hardened Materials 44-48 HRC(844)
      • H2
        Hardened Materials 48-55 HRC(844)
      • H3
        Hardened Materials 56-60 HRC(844)
      • H4
        Hardened Materials >60 HRC(844)
    Applications
    Applications
    • Back BoringBack Boring (19)
    • Face GroovingFace Grooving (176)
    • FacingFacing (49)
    • ID FacingID Facing (437)
    • ID GroovingID Grooving (212)
    • ID Thread TurningID Thread Turning (128)
    • TRN BoringTRN Boring (453)
    • ThreadingThreading (128)
    • TurningTurning (49)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 0.0 (128)
    • 45.0 (16)
    • 90.0 (433)
    • 93.0 (19)
    • 96.0 (92)
    • 98.0 (284)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Boring Bar Shank (923)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.543 in(16)
    • 5.118 in(16)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 90.0 mm(16)
    • 130.0 mm(16)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(48)
    • 0.001 in(42)
    • 0.002 in(119)
    • 0.004 in(282)
    • 0.006 in(114)
    • 0.008 in(151)
    • 0.016 in(14)
    • 0.02 in(18)
    • 0.03 in(6)
    • 0.031 in(12)
    • 0.039 in(18)
    • 0.049 in(10)
    • 0.06 in(10)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(48)
    • 0.025 mm(42)
    • 0.05 mm(119)
    • 0.1 mm(282)
    • 0.151 mm(114)
    • 0.2 mm(151)
    • 0.4 mm(14)
    • 0.5 mm(18)
    • 0.75 mm(6)
    • 0.775 mm(2)
    • 0.8 mm(10)
    • 1.0 mm(18)
    • 1.25 mm(10)
    • 1.5 mm(10)
    Corner Radius MinkomuCorner Radius Max
    application
    Hand Of Tool
    Hand Of Tool
    • L (461)
    • R (462)
    F Dimension
    F Dimension
    • 0.025 mm(1)
    • 0.1 mm(4)
    • 0.151 mm(1)
    • 0.2 mm(18)
    • 0.301 mm(2)
    • 0.351 mm(4)
    • 0.4 mm(4)
    • 0.45 mm(2)
    • 0.601 mm(42)
    • 0.675 mm(2)
    • 0.701 mm(19)
    • 0.8 mm(4)
    • 0.9 mm(15)
    • 1.0 mm(8)
    • 1.1 mm(14)
    • 1.25 mm(4)
    • 1.5 mm(105)
    • 1.6 mm(18)
    • 1.8 mm(16)
    • 1.901 mm(142)
    • 2.0 mm(12)
    • 2.1 mm(18)
    • 2.2 mm(70)
    • 2.301 mm(150)
    • 2.401 mm(48)
    • 2.5 mm(30)
    • 2.7 mm(4)
    • 2.801 mm(85)
    • 3.0 mm(14)
    • 3.301 mm(16)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.001 in(1)
    • 0.004 in(4)
    • 0.006 in(1)
    • 0.008 in(18)
    • 0.012 in(2)
    • 0.014 in(4)
    • 0.016 in(4)
    • 0.019 in(2)
    • 0.024 in(42)
    • 0.027 in(2)
    • 0.028 in(19)
    • 0.031 in(4)
    • 0.035 in(15)
    • 0.039 in(8)
    • 0.044 in(14)
    • 0.049 in(4)
    • 0.06 in(105)
    • 0.063 in(18)
    • 0.072 in(16)
    • 0.075 in(142)
    • 0.079 in(12)
    • 0.083 in(18)
    • 0.088 in(70)
    • 0.091 in(150)
    • 0.095 in(48)
    • 0.098 in(30)
    • 0.106 in(4)
    • 0.11 in(85)
    • 0.119 in(14)
    • 0.13 in(16)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.301 mm(2)
    • 0.4 mm(2)
    • 0.5 mm(4)
    • 0.601 mm(4)
    • 0.701 mm(2)
    • 0.8 mm(4)
    • 1.0 mm(16)
    • 1.201 mm(2)
    • 1.5 mm(20)
    • 1.701 mm(2)
    • 2.0 mm(37)
    • 2.1 mm(3)
    • 2.401 mm(6)
    • 2.5 mm(10)
    • 2.801 mm(24)
    • 2.901 mm(8)
    • 3.0 mm(26)
    • 3.2 mm(10)
    • 3.5 mm(14)
    • 3.7 mm(5)
    • 4.0 mm(112)
    • 4.7 mm(8)
    • 4.801 mm(2)
    • 5.0 mm(174)
    • 5.7 mm(10)
    • 6.0 mm(240)
    • 6.7 mm(8)
    • 6.801 mm(78)
    • 7.0 mm(25)
    • 7.7 mm(8)
    • 7.801 mm(16)
    • 8.0 mm(48)
    • 12.0 mm(8)
    • 16.0 mm(8)
    • 20.0 mm(26)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.012 in(2)
    • 0.016 in(2)
    • 0.02 in(4)
    • 0.024 in(4)
    • 0.028 in(2)
    • 0.031 in(4)
    • 0.039 in(16)
    • 0.047 in(2)
    • 0.06 in(20)
    • 0.067 in(2)
    • 0.079 in(37)
    • 0.083 in(3)
    • 0.095 in(6)
    • 0.098 in(10)
    • 0.11 in(24)
    • 0.114 in(8)
    • 0.119 in(26)
    • 0.126 in(10)
    • 0.138 in(14)
    • 0.146 in(5)
    • 0.157 in(112)
    • 0.185 in(8)
    • 0.189 in(2)
    • 0.197 in(174)
    • 0.224 in(10)
    • 0.237 in(240)
    • 0.264 in(8)
    • 0.268 in(78)
    • 0.276 in(25)
    • 0.303 in(8)
    • 0.307 in(16)
    • 0.315 in(48)
    • 0.473 in(8)
    • 0.63 in(8)
    • 0.787 in(26)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (176)
    • S (286)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.047 in(2)
    • 0.063 in(2)
    • 0.072 in(4)
    • 0.079 in(3)
    • 0.11 in(1)
    • 0.119 in(2)
    • 0.15 in(2)
    • 0.157 in(6)
    • 0.177 in(11)
    • 0.197 in(22)
    • 0.237 in(2)
    • 0.256 in(2)
    • 0.276 in(6)
    • 0.295 in(2)
    • 0.315 in(4)
    • 0.354 in(31)
    • 0.394 in(88)
    • 0.433 in(58)
    • 0.473 in(4)
    • 0.512 in(4)
    • 0.531 in(4)
    • 0.551 in(20)
    • 0.591 in(155)
    • 0.63 in(36)
    • 0.728 in(7)
    • 0.748 in(48)
    • 0.768 in(2)
    • 0.787 in(104)
    • 0.828 in(8)
    • 0.866 in(40)
    • 0.906 in(6)
    • 0.925 in(2)
    • 0.946 in(34)
    • 0.984 in(58)
    • 1.063 in(4)
    • 1.102 in(2)
    • 1.122 in(6)
    • 1.143 in(22)
    • 1.181 in(74)
    • 1.339 in(10)
    • 1.379 in(22)
    • 1.536 in(4)
    • 1.575 in(20)
    • 1.614 in(4)
    • 1.655 in(6)
    • 1.732 in(2)
    • 1.772 in(4)
    • 1.929 in(4)
    • 1.969 in(6)
    • 2.323 in(2)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.201 mm(2)
    • 1.6 mm(2)
    • 1.8 mm(4)
    • 2.0 mm(3)
    • 2.801 mm(1)
    • 3.0 mm(2)
    • 3.801 mm(2)
    • 4.0 mm(6)
    • 4.5 mm(11)
    • 5.0 mm(22)
    • 6.0 mm(2)
    • 6.5 mm(2)
    • 7.0 mm(6)
    • 7.5 mm(2)
    • 8.0 mm(4)
    • 9.0 mm(31)
    • 10.0 mm(88)
    • 11.0 mm(58)
    • 12.0 mm(4)
    • 13.0 mm(4)
    • 13.5 mm(4)
    • 14.0 mm(20)
    • 15.0 mm(155)
    • 16.0 mm(36)
    • 18.5 mm(7)
    • 19.0 mm(48)
    • 19.5 mm(2)
    • 20.0 mm(104)
    • 21.0 mm(8)
    • 22.0 mm(40)
    • 23.0 mm(6)
    • 23.5 mm(2)
    • 24.0 mm(34)
    • 25.0 mm(58)
    • 27.0 mm(4)
    • 28.0 mm(2)
    • 28.5 mm(6)
    • 29.0 mm(22)
    • 30.0 mm(74)
    • 34.0 mm(10)
    • 35.0 mm(22)
    • 39.0 mm(4)
    • 40.0 mm(20)
    • 41.0 mm(4)
    • 42.0 mm(6)
    • 44.0 mm(2)
    • 45.0 mm(4)
    • 49.0 mm(4)
    • 50.0 mm(6)
    • 59.0 mm(2)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • C (747)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.012 in(4)
    • 0.016 in(6)
    • 0.02 in(14)
    • 0.028 in(6)
    • 0.031 in(6)
    • 0.039 in(94)
    • 0.047 in(8)
    • 0.06 in(56)
    • 0.063 in(18)
    • 0.075 in(6)
    • 0.079 in(82)
    • 0.095 in(2)
    • 0.098 in(30)
    • 0.119 in(34)
    • 0.157 in(12)
    • 0.197 in(10)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 0.301 mm(4)
    • 0.4 mm(6)
    • 0.5 mm(14)
    • 0.701 mm(6)
    • 0.8 mm(6)
    • 1.0 mm(94)
    • 1.201 mm(8)
    • 1.5 mm(56)
    • 1.6 mm(18)
    • 1.901 mm(6)
    • 2.0 mm(82)
    • 2.401 mm(2)
    • 2.5 mm(30)
    • 3.0 mm(34)
    • 4.0 mm(12)
    • 5.0 mm(10)
    Cutting Width MinkomuCutting Width Max
    Insert Shape
    Insert Shape
    • KS_BB (15)
    • KS_BP_GA (135)
    • KS_BP_GB (20)
    • KS_BP_GC (21)
    • KS_BP_HM (57)
    • KS_BP_HP (80)
    • KS_BP_ML (37)
    • KS_MF_DB (49)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.008 in(4)
    • 0.016 in(13)
    • 0.02 in(6)
    • 0.024 in(7)
    • 0.028 in(12)
    • 0.031 in(30)
    • 0.039 in(54)
    • 0.072 in(46)
    • 0.079 in(28)
    • 0.098 in(49)
    • 0.119 in(42)
    • 0.157 in(28)
    • 0.197 in(27)
    • 0.237 in(19)
    • 0.394 in(8)
    • 0.591 in(2)
    • 0.787 in(8)
    • 0.984 in(6)
    • 1.181 in(6)
    • 1.379 in(6)
    • 1.575 in(6)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.2 mm(4)
    • 0.4 mm(13)
    • 0.5 mm(6)
    • 0.601 mm(7)
    • 0.701 mm(12)
    • 0.8 mm(30)
    • 1.0 mm(54)
    • 1.8 mm(46)
    • 2.0 mm(28)
    • 2.5 mm(49)
    • 3.0 mm(42)
    • 4.0 mm(28)
    • 5.0 mm(27)
    • 6.0 mm(19)
    • 10.0 mm(8)
    • 15.0 mm(2)
    • 20.0 mm(8)
    • 25.0 mm(6)
    • 30.0 mm(6)
    • 35.0 mm(6)
    • 40.0 mm(6)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Gage Length
    Gage Length
    • 1.307 in(1)
    • 1.504 in(1)
    • 2.953 in(11)
    • 3.248 in(16)
    • 3.543 in(14)
    • 3.74 in(10)
    • 4.823 in(16)
    Gage Length
    Gage Length
    • 90 mm(14)
    • 75 mm(11)
    • 95 mm(10)
    • 33.2 mm(1)
    • 38.2 mm(1)
    • 82.5 mm(16)
    • 122.5 mm(16)
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 0.197 in(16)
    • 0.237 in(70)
    • 0.315 in(48)
    • 0.473 in(8)
    • 0.63 in(8)
    • 0.787 in(26)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 5.0 mm(16)
    • 6.0 mm(70)
    • 8.0 mm(48)
    • 12.0 mm(8)
    • 16.0 mm(8)
    • 20.0 mm(26)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    backEnd
    Connection Type
    Connection Type
    • BORING BAR (923)
    System Size
    System Size
    • PSC32 (1)
    • PSC40 (1)
    Back-End Diameter
    Back-End Diameter
    • 4.0 mm(313)
    • 5.0 mm(184)
    • 6.0 mm(250)
    • 7.0 mm(159)
    • 8.0 mm(66)
    • 12.0 mm(11)
    • 12.701 mm(1)
    • 15.875 mm(2)
    • 16.0 mm(20)
    • 19.05 mm(19)
    • 20.0 mm(22)
    • 22.0 mm(20)
    • 25.0 mm(21)
    • 25.401 mm(20)
    • 32.0 mm(1)
    • 40.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.157 in(313)
    • 0.197 in(184)
    • 0.237 in(250)
    • 0.276 in(159)
    • 0.315 in(66)
    • 0.473 in(11)
    • 0.5 in(1)
    • 0.625 in(2)
    • 0.63 in(20)
    • 0.75 in(19)
    • 0.787 in(22)
    • 0.866 in(20)
    • 0.984 in(21)
    • 1.0 in(20)
    • 1.26 in(1)
    • 1.575 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)