Závitování

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (2641)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2612)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2613)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2571)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2471)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1583)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1762)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1582)
    • M Stainless Steel (2581)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2581)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1764)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2441)
    • K Cast Iron (2272)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1579)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2271)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1578)
    • N Non-Ferrous Materials (940)
      • N1
        Wrought Aluminum (833)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(829)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(115)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (836)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (597)
      • N6
        Carbon, Graphite Composites, CFRP (598)
      • N7
        MMC's (16)
    • S High-Temp Alloys (1865)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1624)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1602)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1602)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1518)
    • H Hardened Materials (634)
      • H1
        Hardened Materials 44-48 HRC(627)
      • H2
        Hardened Materials 48-55 HRC(275)
      • H3
        Hardened Materials 56-60 HRC(122)
      • H4
        Hardened Materials >60 HRC(122)
    Vybrat první volbu
    • BR (23)
    • CN (100)
    • DE (241)
    • GB (116)
    • IN (20)
    • SG (90)
    • US (352)
    Applications
    Applications
    • Chamfer TurningChamfer Turning (4)
    • CountersinkingCountersinking (2)
    • Cut-OffCut-Off (4)
    • Deep GroovingDeep Grooving (4)
    • DrillingDrilling (1)
    • Face GroovingFace Grooving (191)
    • FacingFacing (4)
    • GroovingGrooving (134)
    • ID GroovingID Grooving (69)
    • ID Thread TurningID Thread Turning (910)
    • Multiple Direction CuttingMultiple Direction Cutting (4)
    • OD Thread TurningOD Thread Turning (1003)
    • Pipe ThreadPipe Thread (87)
    • Plunge TurningPlunge Turning (4)
    • ProfilingProfiling (4)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (33)
    • Shoulder RoughingShoulder Roughing (33)
    • Shoulder Square EndShoulder Square End (33)
    • Tapping Blind HoleTapping Blind Hole (1005)
    • Tapping Through HoleTapping Through Hole (743)
    • Thread MillingThread Milling (160)
    • ThreadingThreading (2064)
    • TurningTurning (4)
    Cutting Diameter
    Cutting Diameter
    • 0.095 in(1)
    • 0.124 in(1)
    • 0.157 in(1)
    • 0.189 in(1)
    • 0.232 in(1)
    • 0.237 in(2)
    • 0.315 in(2)
    • 0.323 in(1)
    • 0.354 in(4)
    • 0.39 in(1)
    • 0.394 in(4)
    • 0.399 in(1)
    • 0.449 in(1)
    • 0.45 in(2)
    • 0.453 in(3)
    • 0.457 in(1)
    • 0.473 in(2)
    • 0.477 in(1)
    • 0.531 in(1)
    • 0.535 in(1)
    • 0.551 in(3)
    • 0.579 in(1)
    • 0.58 in(1)
    • 0.581 in(1)
    • 0.591 in(2)
    • 0.595 in(1)
    • 0.608 in(2)
    • 0.61 in(3)
    • 0.63 in(4)
    • 0.669 in(5)
    • 0.67 in(2)
    • 0.677 in(1)
    • 0.681 in(1)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.787 in(3)
    • 0.79 in(1)
    • 0.799 in(1)
    • 0.802 in(1)
    • 0.807 in(2)
    • 0.811 in(4)
    • 0.835 in(2)
    • 0.866 in(5)
    • 0.87 in(5)
    • 0.906 in(1)
    • 0.909 in(2)
    • 0.917 in(1)
    • 0.965 in(1)
    • 0.969 in(1)
    • 0.984 in(1)
    • 1.02 in(2)
    • 1.024 in(4)
    • 1.039 in(2)
    • 1.18 in(3)
    • 1.181 in(13)
    • 1.22 in(4)
    • 1.358 in(1)
    • 1.379 in(1)
    • 1.417 in(4)
    • 1.421 in(2)
    • 1.437 in(1)
    • 1.441 in(2)
    • 1.457 in(2)
    • 1.46 in(1)
    • 1.478 in(1)
    • 1.539 in(1)
    • 1.651 in(1)
    • 1.655 in(4)
    • 1.69 in(1)
    • 1.732 in(2)
    • 1.811 in(1)
    • 1.891 in(2)
    • 1.929 in(2)
    • 2.047 in(2)
    • 2.09 in(1)
    • 2.091 in(1)
    • 2.205 in(1)
    • 2.283 in(1)
    • 2.319 in(2)
    • 2.48 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 2.401 mm(1)
    • 3.151 mm(1)
    • 4.0 mm(1)
    • 4.801 mm(1)
    • 5.9 mm(1)
    • 6.0 mm(2)
    • 8.0 mm(2)
    • 8.201 mm(1)
    • 9.0 mm(4)
    • 9.9 mm(1)
    • 10.0 mm(4)
    • 10.125 mm(1)
    • 11.4 mm(1)
    • 11.425 mm(2)
    • 11.5 mm(3)
    • 11.601 mm(1)
    • 12.0 mm(2)
    • 12.101 mm(1)
    • 13.5 mm(1)
    • 13.601 mm(1)
    • 14.0 mm(3)
    • 14.701 mm(1)
    • 14.726 mm(1)
    • 14.75 mm(1)
    • 15.0 mm(2)
    • 15.101 mm(1)
    • 15.451 mm(2)
    • 15.5 mm(3)
    • 16.0 mm(4)
    • 17.0 mm(5)
    • 17.026 mm(2)
    • 17.2 mm(1)
    • 17.3 mm(1)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(3)
    • 20.076 mm(1)
    • 20.3 mm(1)
    • 20.375 mm(1)
    • 20.5 mm(2)
    • 20.6 mm(4)
    • 21.201 mm(2)
    • 22.0 mm(5)
    • 22.1 mm(5)
    • 23.0 mm(1)
    • 23.1 mm(2)
    • 23.3 mm(1)
    • 24.5 mm(1)
    • 24.6 mm(1)
    • 25.0 mm(1)
    • 25.901 mm(2)
    • 26.0 mm(4)
    • 26.401 mm(2)
    • 29.975 mm(3)
    • 30.0 mm(13)
    • 31.0 mm(4)
    • 34.5 mm(1)
    • 35.0 mm(1)
    • 36.0 mm(4)
    • 36.1 mm(2)
    • 36.5 mm(1)
    • 36.6 mm(2)
    • 37.0 mm(2)
    • 37.075 mm(1)
    • 37.551 mm(1)
    • 39.1 mm(1)
    • 41.901 mm(1)
    • 42.0 mm(4)
    • 42.926 mm(1)
    • 44.0 mm(2)
    • 46.0 mm(1)
    • 48.0 mm(2)
    • 49.0 mm(2)
    • 52.0 mm(2)
    • 53.075 mm(1)
    • 53.1 mm(1)
    • 56.0 mm(1)
    • 58.0 mm(1)
    • 58.901 mm(2)
    • 63.0 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 13.9 mm(1)
    • 14.0 mm(1)
    • 17.0 mm(1)
    • 17.026 mm(1)
    • 22.0 mm(1)
    • 22.1 mm(1)
    • 27.951 mm(1)
    • 28.0 mm(1)
    • 36.1 mm(1)
    • 39.075 mm(1)
    • 45.0 mm(1)
    • 49.0 mm(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 0.547 in(1)
    • 0.551 in(1)
    • 0.669 in(1)
    • 0.67 in(1)
    • 0.866 in(1)
    • 0.87 in(1)
    • 1.1 in(1)
    • 1.102 in(1)
    • 1.421 in(1)
    • 1.538 in(1)
    • 1.772 in(1)
    • 1.929 in(1)
    Maximum Cutting Diameter MinkomuMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 5.0 mm(4)
    • 6.0 mm(7)
    • 6.25 mm(1)
    • 7.0 mm(28)
    • 7.9 mm(21)
    • 8.0 mm(40)
    • 8.1 mm(9)
    • 8.201 mm(1)
    • 8.725 mm(1)
    • 9.0 mm(12)
    • 9.1 mm(20)
    • 9.5 mm(1)
    • 9.701 mm(41)
    • 9.9 mm(8)
    • 10.0 mm(113)
    • 10.101 mm(1)
    • 10.4 mm(4)
    • 10.5 mm(2)
    • 10.775 mm(1)
    • 10.9 mm(1)
    • 10.925 mm(4)
    • 11.0 mm(18)
    • 11.101 mm(43)
    • 11.201 mm(6)
    • 11.5 mm(2)
    • 11.601 mm(11)
    • 11.701 mm(1)
    • 11.8 mm(9)
    • 11.9 mm(3)
    • 12.0 mm(73)
    • 12.101 mm(10)
    • 12.201 mm(5)
    • 12.351 mm(1)
    • 12.4 mm(41)
    • 12.5 mm(3)
    • 12.701 mm(43)
    • 13.0 mm(93)
    • 13.101 mm(2)
    • 13.201 mm(5)
    • 13.4 mm(13)
    • 14.0 mm(20)
    • 14.201 mm(19)
    • 14.8 mm(10)
    • 14.9 mm(3)
    • 15.0 mm(168)
    • 15.101 mm(31)
    • 15.201 mm(8)
    • 15.8 mm(2)
    • 16.0 mm(95)
    • 16.45 mm(1)
    • 16.825 mm(2)
    • 17.0 mm(10)
    • 17.3 mm(2)
    • 17.475 mm(3)
    • 17.5 mm(37)
    • 18.0 mm(84)
    • 18.7 mm(3)
    • 18.901 mm(2)
    • 19.0 mm(13)
    • 19.05 mm(9)
    • 19.1 mm(32)
    • 19.6 mm(34)
    • 20.0 mm(68)
    • 20.201 mm(1)
    • 20.451 mm(1)
    • 21.0 mm(33)
    • 21.1 mm(1)
    • 22.0 mm(16)
    • 22.1 mm(1)
    • 22.3 mm(8)
    • 22.401 mm(13)
    • 23.0 mm(9)
    • 23.1 mm(12)
    • 23.875 mm(1)
    • 23.901 mm(37)
    • 24.0 mm(31)
    • 24.475 mm(1)
    • 24.701 mm(1)
    • 25.0 mm(33)
    • 25.35 mm(1)
    • 25.401 mm(25)
    • 26.0 mm(1)
    • 26.201 mm(8)
    • 26.925 mm(5)
    • 27.0 mm(7)
    • 27.701 mm(38)
    • 28.0 mm(3)
    • 29.151 mm(1)
    • 30.0 mm(28)
    • 31.0 mm(14)
    • 31.8 mm(2)
    • 32.0 mm(1)
    • 32.15 mm(1)
    • 32.926 mm(1)
    • 33.0 mm(1)
    • 34.0 mm(5)
    • 34.926 mm(7)
    • 35.0 mm(15)
    • 36.0 mm(4)
    • 36.7 mm(1)
    • 38.0 mm(1)
    • 38.1 mm(6)
    • 38.5 mm(2)
    • 40.0 mm(13)
    • 41.151 mm(2)
    • 42.0 mm(4)
    • 43.5 mm(4)
    • 44.45 mm(2)
    • 45.0 mm(2)
    • 48.0 mm(2)
    • 50.0 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.197 in(4)
    • 0.237 in(7)
    • 0.246 in(1)
    • 0.276 in(28)
    • 0.311 in(21)
    • 0.315 in(40)
    • 0.319 in(9)
    • 0.323 in(1)
    • 0.345 in(1)
    • 0.354 in(12)
    • 0.358 in(20)
    • 0.374 in(1)
    • 0.382 in(41)
    • 0.39 in(8)
    • 0.394 in(113)
    • 0.398 in(1)
    • 0.41 in(4)
    • 0.414 in(2)
    • 0.424 in(1)
    • 0.429 in(1)
    • 0.43 in(4)
    • 0.433 in(18)
    • 0.437 in(43)
    • 0.441 in(6)
    • 0.453 in(2)
    • 0.457 in(11)
    • 0.461 in(1)
    • 0.465 in(9)
    • 0.47 in(3)
    • 0.473 in(73)
    • 0.477 in(10)
    • 0.48 in(5)
    • 0.486 in(1)
    • 0.488 in(41)
    • 0.492 in(3)
    • 0.5 in(43)
    • 0.512 in(93)
    • 0.516 in(2)
    • 0.52 in(5)
    • 0.528 in(13)
    • 0.551 in(20)
    • 0.559 in(19)
    • 0.583 in(10)
    • 0.587 in(3)
    • 0.591 in(168)
    • 0.595 in(31)
    • 0.598 in(8)
    • 0.622 in(2)
    • 0.63 in(95)
    • 0.648 in(1)
    • 0.662 in(2)
    • 0.669 in(10)
    • 0.681 in(2)
    • 0.689 in(3)
    • 0.69 in(37)
    • 0.709 in(84)
    • 0.736 in(3)
    • 0.744 in(2)
    • 0.748 in(13)
    • 0.75 in(9)
    • 0.752 in(32)
    • 0.772 in(34)
    • 0.787 in(68)
    • 0.795 in(1)
    • 0.805 in(1)
    • 0.828 in(33)
    • 0.832 in(1)
    • 0.866 in(16)
    • 0.87 in(1)
    • 0.878 in(8)
    • 0.882 in(13)
    • 0.906 in(9)
    • 0.909 in(12)
    • 0.941 in(1)
    • 0.942 in(37)
    • 0.946 in(31)
    • 0.964 in(1)
    • 0.972 in(1)
    • 0.984 in(33)
    • 0.998 in(1)
    • 1.0 in(25)
    • 1.024 in(1)
    • 1.032 in(8)
    • 1.06 in(5)
    • 1.063 in(7)
    • 1.091 in(38)
    • 1.102 in(3)
    • 1.149 in(1)
    • 1.181 in(28)
    • 1.22 in(14)
    • 1.252 in(2)
    • 1.26 in(1)
    • 1.266 in(1)
    • 1.296 in(1)
    • 1.299 in(1)
    • 1.339 in(5)
    • 1.375 in(7)
    • 1.379 in(15)
    • 1.417 in(4)
    • 1.445 in(1)
    • 1.496 in(1)
    • 1.5 in(6)
    • 1.516 in(2)
    • 1.575 in(13)
    • 1.62 in(2)
    • 1.655 in(4)
    • 1.713 in(4)
    • 1.75 in(2)
    • 1.772 in(2)
    • 1.891 in(2)
    • 1.969 in(1)
    Cutting Length MinkomuCutting Length Max
    Type of Thread
    Type of Thread
    • 55 (136)
    • 60 (459)
    • ACME (319)
    • API (163)
    • API BUTTRESS (38)
    • API RD (162)
    • BSPT (113)
    • BSW (332)
    • BUTTRESS (211)
    • G (14)
    • M (1301)
    • MF (10)
    • NPS (15)
    • NPT (247)
    • NPTF (139)
    • RD DIN 405 (116)
    • STUB ACME (226)
    • TR DIN 103 (120)
    • UN (668)
    • UNC (522)
    • UNF (318)
    • UNJ (288)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (191)
    • Lightly Interrupted Cut (191)
    • Smooth Cut (192)
    • Varying Depth of Cut (192)
    Thread Size
    Thread Size
    • 1 - 11 (2)
    • 1 - 11 1/2 (2)
    • 1 - 12 (2)
    • 1 - 8 (9)
    • 1 1/2 - 6 (2)
    • 1 1/4 - 7 (3)
    • 1 1/8 - 12 (2)
    • 1 1/8 - 7 (4)
    • 1 3/4 - 5 (1)
    • 1 3/8 - 6 (1)
    • 1/16 - 27 (3)
    • 1/2 - 13 (48)
    • 1/2 - 14 (6)
    • 1/2 - 20 (33)
    • 1/4 - 18 (4)
    • 1/4 - 19 (2)
    • 1/4 - 20 (62)
    • 1/4 - 28 (54)
    • 1/8 - 27 (8)
    • 1/8 - 28 (3)
    • 10 - 24 (39)
    • 10 - 32 (56)
    • 12 - 24 (2)
    • 12 - 28 (2)
    • 2 - 56 (13)
    • 3 - 48 (2)
    • 3/4 - 10 (17)
    • 3/4 - 14 (5)
    • 3/4 - 16 (12)
    • 3/8 - 16 (58)
    • 3/8 - 18 (4)
    • 3/8 - 19 (2)
    • 3/8 - 24 (42)
    • 4 - 40 (41)
    • 4 - 48 (4)
    • 5 - 40 (5)
    • 5/16 - 18 (56)
    • 5/16 - 24 (43)
    • 5/16- 24 (4)
    • 5/8 - 11 (29)
    • 5/8 - 18 (16)
    • 6 - 32 (45)
    • 6 - 40 (10)
    • 7/16 - 14 (26)
    • 7/16 - 20 (33)
    • 7/8 - 14 (4)
    • 7/8 - 9 (5)
    • 8 - 32 (53)
    • 8 - 36 (4)
    • 9/16 - 12 (8)
    • 9/16 - 18 (9)
    • M10 X 0,75 (2)
    • M10 X 1 (19)
    • M10 X 1,25 (19)
    • M10 X 1,5 (69)
    • M10 X 1,50 (2)
    • M10 X 1.0 (1)
    • M10 X 1.5 (1)
    • M10X1.5 (1)
    • M12 X 1 (3)
    • M12 X 1,25 (15)
    • M12 X 1,5 (23)
    • M12 X 1,75 (62)
    • M12 X 1.0 (1)
    • M12 X 1.5 (1)
    • M12 X 1.75 (1)
    • M14 X 1 (3)
    • M14 X 1,25 (6)
    • M14 X 1,5 (26)
    • M14 X 1.5 (1)
    • M14 X 2 (34)
    • M14 X 2,0 (1)
    • M14 X 2.0 (1)
    • M14X1.5 (1)
    • M16 X 1 (1)
    • M16 X 1,5 (23)
    • M16 X 1.5 (1)
    • M16 X 2 (37)
    • M16 X 2,0 (3)
    • M16 X 2.0 (1)
    • M18 X 1,5 (12)
    • M18 X 1.5 (1)
    • M18 X 2 (3)
    • M18 X 2,5 (12)
    • M2 X 0,4 (7)
    • M2,5 X 0,45 (8)
    • M20 X 1,5 (3)
    • M20 X 1.5 (1)
    • M20 X 2 (3)
    • M20 X 2,5 (15)
    • M20 X 2.5 (1)
    • M22 X 1,5 (3)
    • M22 X 2 (2)
    • M22 X 2,5 (5)
    • M24 X 1,5 (3)
    • M24 X 2 (2)
    • M24 X 3 (13)
    • M27 X 1,5 (1)
    • M27 X 3 (3)
    • M3 X 0,5 (40)
    • M3 X 0.5 (1)
    • M3,5 X 0,6 (5)
    • M30 X 1,5 (2)
    • M30 X 2 (1)
    • M30 X 3,5 (12)
    • M33 X 3,5 (3)
    • M36 X 4 (9)
    • M39 X 4 (1)
    • M4 X 0,5 (1)
    • M4 X 0,7 (44)
    • M4 X 0.7 (1)
    • M42 X 4,5 (4)
    • M5 X 0,5 (1)
    • M5 X 0,8 (58)
    • M5 X 0.8 (1)
    • M6 X 0,5 (1)
    • M6 X 0,75 (3)
    • M6 X 1 (75)
    • M7 X 1 (11)
    • M8 X 0,75 (1)
    • M8 X 0.75 (1)
    • M8 X 1 (17)
    • M8 X 1,0 (1)
    • M8 X 1,25 (76)
    • M8 X 1.0 (1)
    • M8 X 1.25 (1)
    • M9 X 1,25 (1)
    Reach
    Reach
    • 0.472 in(1)
    • 0.473 in(3)
    • 0.61 in(2)
    • 0.648 in(1)
    • 0.662 in(1)
    • 0.669 in(2)
    • 0.787 in(1)
    • 0.79 in(1)
    • 0.797 in(1)
    • 0.805 in(1)
    • 0.807 in(1)
    • 0.866 in(2)
    • 0.87 in(2)
    • 0.906 in(1)
    • 0.909 in(1)
    • 0.931 in(1)
    • 0.964 in(1)
    • 0.972 in(1)
    • 0.984 in(1)
    • 0.998 in(1)
    • 1.0 in(1)
    • 1.02 in(2)
    • 1.024 in(4)
    • 1.098 in(1)
    • 1.102 in(3)
    • 1.149 in(1)
    • 1.181 in(2)
    • 1.191 in(1)
    • 1.26 in(2)
    • 1.266 in(1)
    • 1.296 in(1)
    • 1.319 in(2)
    • 1.341 in(1)
    • 1.379 in(1)
    • 1.417 in(2)
    • 1.421 in(1)
    • 1.445 in(1)
    • 1.449 in(1)
    • 1.457 in(1)
    • 1.496 in(1)
    • 1.5 in(1)
    • 1.567 in(1)
    • 1.575 in(4)
    • 1.579 in(3)
    • 1.62 in(2)
    • 1.68 in(1)
    • 1.689 in(2)
    • 1.69 in(1)
    • 1.693 in(10)
    • 1.701 in(3)
    • 1.732 in(1)
    • 1.752 in(1)
    • 1.77 in(1)
    • 1.772 in(3)
    • 1.78 in(1)
    • 1.788 in(1)
    • 1.891 in(2)
    • 1.969 in(5)
    • 2.0 in(3)
    • 2.031 in(2)
    • 2.047 in(1)
    • 2.15 in(1)
    • 2.165 in(4)
    • 2.201 in(2)
    • 2.283 in(1)
    • 2.559 in(7)
    • 2.561 in(1)
    • 2.567 in(1)
    • 2.575 in(2)
    • 2.693 in(1)
    • 2.961 in(1)
    • 2.969 in(1)
    • 3.15 in(4)
    • 3.209 in(1)
    • 3.358 in(2)
    • 3.362 in(2)
    • 3.531 in(1)
    • 3.598 in(1)
    • 3.622 in(1)
    • 3.858 in(1)
    • 3.938 in(1)
    • 3.95 in(1)
    • 3.954 in(1)
    • 4.0 in(1)
    • 4.055 in(1)
    • 4.059 in(1)
    • 4.346 in(1)
    • 4.358 in(1)
    • 4.728 in(1)
    • 4.74 in(1)
    • 5.039 in(2)
    • 5.428 in(1)
    • 5.984 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 11.951 mm(1)
    • 12.0 mm(3)
    • 15.5 mm(2)
    • 16.45 mm(1)
    • 16.825 mm(1)
    • 17.0 mm(2)
    • 20.0 mm(1)
    • 20.076 mm(1)
    • 20.25 mm(1)
    • 20.451 mm(1)
    • 20.5 mm(1)
    • 22.0 mm(2)
    • 22.1 mm(2)
    • 23.0 mm(1)
    • 23.1 mm(1)
    • 23.651 mm(1)
    • 24.475 mm(1)
    • 24.701 mm(1)
    • 25.0 mm(1)
    • 25.35 mm(1)
    • 25.401 mm(1)
    • 25.901 mm(2)
    • 26.0 mm(4)
    • 27.901 mm(1)
    • 28.0 mm(3)
    • 29.151 mm(1)
    • 30.0 mm(2)
    • 30.25 mm(1)
    • 32.0 mm(2)
    • 32.15 mm(1)
    • 32.926 mm(1)
    • 33.5 mm(2)
    • 34.051 mm(1)
    • 35.0 mm(1)
    • 36.0 mm(2)
    • 36.1 mm(1)
    • 36.7 mm(1)
    • 36.801 mm(1)