KM4X™

Vybrat filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (169)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (169)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (169)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (169)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (169)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (169)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (169)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (169)
  • M Stainless Steel (167)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (167)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (167)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (167)
  • K Cast Iron (169)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (169)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (169)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (169)
  • N Non-Ferrous Materials (157)
    • N1
      Wrought Aluminum (157)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (155)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (103)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (157)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (155)
    • N6
      Carbon, Graphite Composites, CFRP (155)
    • N7
      MMC's (147)
  • S High-Temp Alloys (163)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (163)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (163)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (163)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (163)
  • H Hardened Materials (130)
    • H1
      Hardened Materials 44-48 HRC (130)
    • H2
      Hardened Materials 48-55 HRC (130)
    • H3
      Hardened Materials 56-60 HRC (122)
    • H4
      Hardened Materials >60 HRC (111)
  • C CFRP Materials (130)
    • C1
      CFRP, CFRP / CFRP (130)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (126)
Applications
Applications
  • Chamfer Turning Chamfer Turning (17)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (20)
  • Face Grooving Face Grooving (6)
  • Facing Facing (133)
  • Grooving Grooving (20)
  • ID Facing ID Facing (80)
  • ID Grooving ID Grooving (16)
  • ID Thread Turning ID Thread Turning (22)
  • Multiple Direction Cutting Multiple Direction Cutting (99)
  • OD Thread Turning OD Thread Turning (26)
  • Plunge Turning Plunge Turning (16)
  • Profiling Profiling (81)
  • TRN Boring TRN Boring (122)
  • Threading Threading (24)
  • Turning Turning (141)
Type of Thread
Type of Thread
  • 55 (8)
  • 60 (22)
  • ACME (24)
  • API (20)
  • API BUTTRESS (4)
  • API RD (14)
  • BSPT (4)
  • BSW (16)
  • BUTTRESS (14)
  • M (16)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (8)
  • STUB ACME (16)
  • TR DIN 103 (8)
  • UN (18)
  • UNJ (12)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (154)
  • Lightly Interrupted Cut (158)
  • Smooth Cut (160)
  • Varying Depth of Cut (160)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 0.0 (2)
  • 45.0 (5)
  • 48.0 (5)
  • 49.683 (2)
  • 50.0 (2)
  • 72.5 (1)
  • 75.0 (17)
  • 90.0 (54)
  • 93.0 (35)
  • 95.0 (42)
  • 107.5 (10)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (94)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (6)
  • 1.0 (100)
  • 2.0 (116)
  • 3.0 (34)
  • 4.0 (88)
  • 6.0 (18)
  • 8.0 (54)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 2.757 in (77)
  • 3.938 in (51)
  • 4.331 in (1)
  • 4.529 in (12)
  • 4.921 in (6)
  • 5.513 in (22)
  • 6.694 in (6)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 70.0 mm (77)
  • 100.0 mm (51)
  • 110.0 mm (1)
  • 115.0 mm (12)
  • 125.0 mm (6)
  • 140.0 mm (22)
  • 170.0 mm (6)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (3)
  • 0.002 in (26)
  • 0.003 in (18)
  • 0.004 in (88)
  • 0.005 in (9)
  • 0.006 in (17)
  • 0.007 in (15)
  • 0.008 in (85)
  • 0.01 in (15)
  • 0.011 in (10)
  • 0.012 in (11)
  • 0.014 in (38)
  • 0.015 in (1)
  • 0.016 in (117)
  • 0.017 in (4)
  • 0.019 in (14)
  • 0.02 in (9)
  • 0.021 in (3)
  • 0.023 in (18)
  • 0.024 in (10)
  • 0.027 in (2)
  • 0.028 in (1)
  • 0.03 in (1)
  • 0.031 in (129)
  • 0.033 in (6)
  • 0.035 in (14)
  • 0.037 in (2)
  • 0.038 in (1)
  • 0.039 in (10)
  • -0.039 in (6)
  • 0.047 in (129)
  • 0.049 in (8)
  • 0.055 in (1)
  • 0.06 in (9)
  • 0.062 in (26)
  • 0.063 in (119)
  • 0.069 in (8)
  • 0.078 in (8)
  • 0.079 in (14)
  • 0.089 in (14)
  • 0.094 in (23)
  • 0.095 in (56)
  • 0.098 in (6)
  • 0.125 in (12)
  • 0.126 in (23)
  • 0.157 in (4)
  • 0.237 in (1)
  • 0.25 in (2)
  • 0.315 in (3)
  • 0.375 in (2)
  • 0.394 in (1)
  • 0.492 in (1)
  • 0.5 in (2)
  • 0.63 in (1)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (3)
  • 0.05 mm (26)
  • 0.076 mm (18)
  • 0.1 mm (88)
  • 0.125 mm (9)
  • 0.151 mm (17)
  • 0.176 mm (15)
  • 0.2 mm (85)
  • 0.225 mm (9)
  • 0.25 mm (15)
  • 0.275 mm (10)
  • 0.301 mm (11)
  • 0.325 mm (19)
  • 0.351 mm (33)
  • 0.375 mm (1)
  • 0.4 mm (117)
  • 0.426 mm (4)
  • 0.45 mm (14)
  • 0.476 mm (4)
  • 0.5 mm (9)
  • 0.525 mm (3)
  • 0.576 mm (18)
  • 0.601 mm (10)
  • 0.65 mm (2)
  • 0.701 mm (1)
  • 0.75 mm (1)
  • 0.775 mm (8)
  • 0.8 mm (121)
  • 0.826 mm (6)
  • 0.9 mm (14)
  • 0.925 mm (2)
  • 0.976 mm (1)
  • 1.0 mm (10)
  • -1.0 mm (6)
  • 1.201 mm (129)
  • 1.25 mm (8)
  • 1.401 mm (1)
  • 1.5 mm (8)
  • 1.526 mm (1)
  • 1.576 mm (26)
  • 1.6 mm (119)
  • 1.75 mm (8)
  • 1.975 mm (8)
  • 2.0 mm (14)
  • 2.25 mm (14)
  • 2.375 mm (23)
  • 2.401 mm (56)
  • 2.5 mm (6)
  • 3.176 mm (12)
  • 3.2 mm (23)
  • 4.0 mm (4)
  • 6.0 mm (1)
  • 6.351 mm (2)
  • 8.0 mm (3)
  • 9.525 mm (2)
  • 10.0 mm (1)
  • 12.5 mm (1)
  • 12.701 mm (2)
  • 16.0 mm (1)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (77)
  • 241 (18)
  • AC5 (1)
  • CG4 (1)
  • CL4 (57)
  • CM2 (72)
  • CM3 (64)
  • CM4 (33)
  • CM5 (2)
  • CPX (80)
  • CW2 (37)
  • CW2015 (76)
  • CW5025 (80)
  • GH1 (2)
  • GX (44)
  • HCK10 (7)
  • HCK20 (1)
  • HK1500 (76)
  • HK35 (7)
  • HT2 (58)
  • HTX (37)
  • HWK15 (7)
  • K00326 (8)
  • K00331 (2)
  • K060 (33)
  • K090 (86)
  • K1 (39)
  • K1010P (2)
  • K10M (109)
  • K10P (99)
  • K10U (84)
  • K15 (3)
  • K15U (84)
  • K20K (105)
  • K21 (43)
  • K25M (86)
  • K25P (90)
  • K2885 (8)
  • K313 (142)
  • K35P (62)
  • K420 (90)
  • K45 (41)
  • K4H (8)
  • K68 (139)
  • K8735 (8)
  • KB1340 (27)
  • KB1345 (47)
  • KB1610 (53)
  • KB1625 (49)
  • KB1630 (47)
  • KB5610 (52)
  • KB5625 (57)
  • KB5630 (36)
  • KB9610 (78)
  • KB9640 (39)
  • KBH10 (72)
  • KBH10B (47)
  • KBH20 (87)
  • KBH20B (47)
  • KBK35 (18)
  • KC210 (70)
  • KC250 (77)
  • KC5010 (157)
  • KC5020P (8)
  • KC5025 (152)
  • KC5410 (134)
  • KC5510 (94)
  • KC5525 (65)
  • KC710 (38)
  • KC720 (110)
  • KC722 (34)
  • KC730 (130)
  • KC7310 (100)
  • KC732 (95)
  • KC8050 (139)
  • KC810 (143)
  • KC850 (159)
  • KC9010 (95)
  • KC9025 (132)
  • KC910 (132)
  • KC9105 (117)
  • KC9110 (151)
  • KC9120 (129)
  • KC9125 (137)
  • KC9125RR (11)
  • KC9140 (107)
  • KC9145 (103)
  • KC9210 (19)
  • KC9215 (92)
  • KC9225 (121)
  • KC9240 (126)
  • KC9240NEW (122)
  • KC9245 (94)
  • KC9315 (132)
  • KC9320 (128)
  • KC9325 (113)
  • KC935 (143)
  • KC950 (135)
  • KC990 (109)
  • KCD25 (35)
  • KCK05 (121)
  • KCK05B (106)
  • KCK15 (116)
  • KCK15B (125)
  • KCK20 (134)
  • KCK20B (138)
  • KCM15 (113)
  • KCM15B (111)
  • KCM25 (129)
  • KCM25B (117)
  • KCM25S (2)
  • KCM35 (111)
  • KCM35B (82)
  • KCP05 (107)
  • KCP05B (81)
  • KCP10 (137)
  • KCP10B (142)
  • KCP15 (6)
  • KCP20S (2)
  • KCP25 (140)
  • KCP25B (149)
  • KCP25C (139)
  • KCP30 (128)
  • KCP30B (103)
  • KCP40 (101)
  • KCP40B (109)
  • KCPK05 (94)
  • KCS10 (39)
  • KCS10B (116)
  • KCS25S (2)
  • KCU10 (153)
  • KCU10B (144)
  • KCU25 (141)
  • KCU25B (122)
  • KD050 (59)
  • KD081 (63)
  • KD100 (53)
  • KD120 (63)
  • KD1400 (52)
  • KD1405 (34)
  • KD1425 (68)
  • KM1 (36)
  • KMF (18)
  • KN10S (2)
  • KS15 (26)
  • KT1120 (16)
  • KT125 (70)
  • KT150 (43)
  • KT175 (76)
  • KT315 (113)
  • KT325 (58)
  • KT5020 (2)
  • KTP10 (80)
  • KTP25S (71)
  • KU10 (8)
  • KU10T (105)
  • KU25T (16)
  • KU30T (129)
  • KY1310 (51)
  • KY1320 (86)
  • KY1540 (47)
  • KY1615 (82)
  • KY2000 (49)
  • KY2100 (33)
  • KY3000 (96)
  • KY3400 (69)
  • KY3500 (90)
  • KY4000 (35)
  • KY4300 (42)
  • KY4400 (88)
  • KYHK15B (88)
  • KYK10 (43)
  • KYK25 (65)
  • KYK35 (90)
  • KYS25 (41)
  • KYS30 (51)
  • MC2 (2)
  • NL200 (37)
  • NL250 (94)
  • NL300 (85)
  • NL400 (47)
  • NL920 (76)
  • P25 (34)
  • PB100 (26)
  • PB170 (29)
  • PB250 (31)
  • PB300 (18)
  • PD100 (7)
  • PD50 (7)
  • PN120 (1)
  • PS5 (39)
  • SP0819 (73)
  • SP0A00 (7)
  • SP0PW3 (5)
  • SP3019 (61)
  • SP4019 (70)
  • SP4036 (2)
  • SP4066 (1)
  • SP4093 (2)
  • SP61EJ (7)
  • SPADAP (19)
  • SPN4W2 (4)
  • THM (69)
  • THM-X (51)
  • THMF-X (25)
  • TN10P (120)
  • TN10U (89)
  • TN15M (109)
  • TN15U (84)
  • TN2000 (85)
  • TN20K (113)
  • TN20P (117)
  • TN30M (111)
  • TN30P (94)
  • TN4000 (78)
  • TN5015 (100)
  • TN5020 (102)
  • TN5105 (83)
  • TN5120 (110)
  • TN6010 (72)
  • TN6025 (86)
  • TN7005 (71)
  • TN7010 (110)
  • TN7015 (119)
  • TN7025 (119)
  • TN7035 (102)
  • TN7105 (69)
  • TN7110 (118)
  • TN7115 (117)
  • TN7125 (111)
  • TN7135 (102)
  • TN8025 (110)
  • TTI15 (48)
  • TTM (6)
  • TTM09 (24)
  • TTR (44)
  • TTR-X (4)
  • TTS (57)
  • TTX (51)
  • W00342 (13)
  • WBH10C (72)
  • WBH10P (36)
  • WBH10U (53)
  • WBH20P (77)
  • WBH25P (43)
  • WBH25U (66)
  • WBH30P (36)
  • WBK40U (27)
  • WBK45U (58)
  • WDN00U (26)
  • WDN25U (52)
  • WK05CT (107)
  • WK15CT (73)
  • WK20CT (118)
  • WM15CT (113)
  • WM25CT (116)
  • WM35CT (94)
  • WP05CT (28)
  • WP15CT (125)
  • WP20TT (4)
  • WP25CT (125)
  • WP35CT (119)
  • WS10PT (105)
  • WS25PT (102)
  • WU05PT (13)
  • WU10HT (113)
  • WU10PT (83)
  • WU25PT (80)
  • X00511 (18)
  • X00580 (18)
  • X00581 (18)
  • X00582 (18)
  • X00583 (18)
  • X00584 (18)
  • X00585 (18)
  • X00586 (18)
  • X00591 (18)
  • X00592 (18)
  • X00593 (18)
  • X00594 (18)
  • X00596 (18)
  • X00597 (18)
  • X00599 (18)
Hand Of Tool
Hand Of Tool
  • L (44)
  • N (7)
  • R (43)
Wiper Insert
Wiper Insert
  • N (171)
  • Y (59)
F Dimension
F Dimension
  • 0.0 mm (3)
  • 8.0 mm (1)
  • 10.0 mm (1)
  • 12.5 mm (1)
  • 16.0 mm (1)
  • 17.0 mm (6)
  • 22.0 mm (12)
  • 27.0 mm (10)
  • 35.0 mm (6)
  • 38.0 mm (4)
  • 43.0 mm (35)
  • 58.0 mm (8)
  • 63.0 mm (6)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.0 in (3)
  • 0.315 in (1)
  • 0.394 in (1)
  • 0.492 in (1)
  • 0.63 in (1)
  • 0.669 in (6)
  • 0.866 in (12)
  • 1.063 in (10)
  • 1.379 in (6)
  • 1.496 in (4)
  • 1.693 in (35)
  • 2.283 in (8)
  • 2.48 in (6)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (4)
  • -1.0 mm (4)
  • 32.0 mm (6)
  • 40.0 mm (12)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 50.0 mm (10)
  • 57.2 mm (2)
  • 63.0 mm (6)
  • 80.0 mm (4)
  • 86.0 mm (38)
  • 88.9 mm (2)
  • 100.0 mm (12)
  • 120.0 mm (33)
  • 139.701 mm (2)
  • 174.601 mm (2)
  • 209.601 mm (2)
  • 222.3 mm (2)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (4)
  • -0.039 in (4)
  • 1.26 in (6)
  • 1.575 in (12)
  • 1.627 in (2)
  • 1.874 in (2)
  • 1.969 in (10)
  • 2.253 in (2)
  • 2.48 in (6)
  • 3.15 in (4)
  • 3.386 in (38)
  • 3.5 in (2)
  • 3.938 in (12)
  • 4.724 in (33)