PSC 50

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (119)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (119)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (119)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (119)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (119)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (119)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (119)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (119)
  • M Stainless Steel (119)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (119)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (119)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (119)
  • K Cast Iron (119)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (119)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (119)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (119)
  • N Non-Ferrous Materials (117)
    • N1
      Wrought Aluminum
      (115)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (115)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (77)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (116)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (115)
    • N6
      Carbon, Graphite Composites, CFRP
      (103)
    • N7
      MMC's
      (110)
  • S High-Temp Alloys (119)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (119)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (119)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (119)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (119)
  • H Hardened Materials (104)
    • H1
      Hardened Materials 44-48 HRC
      (104)
    • H2
      Hardened Materials 48-55 HRC
      (95)
    • H3
      Hardened Materials 56-60 HRC
      (89)
    • H4
      Hardened Materials >60 HRC
      (87)
Applications
Applications
  • Facing Facing (94)
  • Grooving Grooving (8)
  • ID Facing ID Facing (88)
  • ID Grooving ID Grooving (12)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (94)
  • OD Thread Turning OD Thread Turning (4)
  • Plunge Turning Plunge Turning (42)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (88)
  • Turning Turning (94)
Type of Thread
Type of Thread
  • 55 (10)
  • 60 (25)
  • ACME (23)
  • API (16)
  • API BUTTRESS (3)
  • API RD (17)
  • BSPT (7)
  • BSW (20)
  • BUTTRESS (15)
  • M (22)
  • NPT (17)
  • NPTF (7)
  • RD DIN 405 (10)
  • STUB ACME (20)
  • TR DIN 103 (10)
  • UN (22)
  • UNJ (17)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (105)
  • Interrupted (55)
  • Lightly Interrupted Cut (105)
  • Smooth Cut (105)
  • Varying Depth of Cut (105)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (4)
  • 62.5 (1)
  • 72.5 (1)
  • 75.0 (8)
  • 90.0 (25)
  • 93.0 (32)
  • 95.0 (37)
  • 107.5 (11)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • PSC (75)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (82)
  • 2.0 (97)
  • 3.0 (13)
  • 4.0 (69)
  • 6.0 (5)
  • 8.0 (37)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (6)
  • 0.002 in (39)
  • 0.003 in (22)
  • 0.004 in (88)
  • 0.005 in (11)
  • 0.006 in (19)
  • 0.007 in (16)
  • 0.008 in (84)
  • 0.01 in (16)
  • 0.011 in (12)
  • 0.012 in (12)
  • 0.014 in (28)
  • 0.015 in (1)
  • 0.016 in (95)
  • 0.017 in (13)
  • 0.019 in (13)
  • 0.02 in (12)
  • 0.021 in (2)
  • 0.023 in (13)
  • 0.024 in (3)
  • 0.028 in (3)
  • 0.03 in (3)
  • 0.031 in (104)
  • 0.035 in (13)
  • 0.037 in (4)
  • 0.039 in (13)
  • 0.047 in (103)
  • 0.049 in (12)
  • 0.055 in (1)
  • 0.06 in (13)
  • 0.062 in (28)
  • 0.063 in (78)
  • 0.069 in (12)
  • 0.078 in (10)
  • 0.079 in (13)
  • 0.089 in (13)
  • 0.094 in (6)
  • 0.095 in (27)
  • 0.098 in (3)
  • 0.125 in (3)
  • 0.126 in (4)
  • 0.25 in (2)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (6)
  • 0.05 mm (39)
  • 0.076 mm (22)
  • 0.1 mm (88)
  • 0.125 mm (11)
  • 0.151 mm (19)
  • 0.176 mm (16)
  • 0.2 mm (84)
  • 0.225 mm (11)
  • 0.25 mm (16)
  • 0.275 mm (12)
  • 0.301 mm (12)
  • 0.325 mm (14)
  • 0.351 mm (27)
  • 0.375 mm (1)
  • 0.4 mm (95)
  • 0.426 mm (13)
  • 0.45 mm (13)
  • 0.476 mm (4)
  • 0.5 mm (12)
  • 0.525 mm (2)
  • 0.576 mm (13)
  • 0.601 mm (3)
  • 0.701 mm (3)
  • 0.75 mm (3)
  • 0.775 mm (12)
  • 0.8 mm (92)
  • 0.9 mm (13)
  • 0.925 mm (4)
  • 1.0 mm (13)
  • 1.201 mm (103)
  • 1.25 mm (12)
  • 1.401 mm (1)
  • 1.5 mm (12)
  • 1.526 mm (1)
  • 1.576 mm (28)
  • 1.6 mm (78)
  • 1.75 mm (12)
  • 1.975 mm (10)
  • 2.0 mm (13)
  • 2.25 mm (13)
  • 2.375 mm (6)
  • 2.401 mm (27)
  • 2.5 mm (3)
  • 3.176 mm (3)
  • 3.2 mm (4)
  • 6.351 mm (2)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (49)
  • 241 (18)
  • CL4 (40)
  • CM2 (44)
  • CM3 (40)
  • CM4 (25)
  • CPX (46)
  • CW2 (32)
  • CW2015 (49)
  • CW5025 (54)
  • GH1 (3)
  • GX (26)
  • HCK10 (12)
  • HCK20 (3)
  • HK1500 (66)
  • HK35 (4)
  • HT2 (62)
  • HTX (40)
  • HWK15 (12)
  • K00326 (4)
  • K00331 (4)
  • K060 (23)
  • K090 (53)
  • K1 (23)
  • K1010P (3)
  • K10M (68)
  • K10P (56)
  • K10U (65)
  • K15 (6)
  • K15U (65)
  • K20K (61)
  • K21 (26)
  • K25M (69)
  • K25P (63)
  • K2885 (12)
  • K313 (105)
  • K35P (26)
  • K420 (55)
  • K45 (26)
  • K4H (10)
  • K68 (98)
  • K8735 (4)
  • KB1340 (29)
  • KB1345 (44)
  • KB1610 (51)
  • KB1625 (39)
  • KB1630 (44)
  • KB5610 (48)
  • KB5625 (58)
  • KB5630 (45)
  • KB9610 (65)
  • KB9640 (34)
  • KBH10 (65)
  • KBH10B (37)
  • KBH20 (69)
  • KBH20B (37)
  • KBK35 (18)
  • KC210 (42)
  • KC250 (48)
  • KC5010 (115)
  • KC5020P (14)
  • KC5025 (115)
  • KC5410 (93)
  • KC5510 (64)
  • KC5525 (47)
  • KC710 (41)
  • KC720 (83)
  • KC722 (37)
  • KC730 (100)
  • KC7310 (70)
  • KC732 (69)
  • KC8050 (94)
  • KC810 (105)
  • KC850 (107)
  • KC9010 (78)
  • KC9025 (94)
  • KC910 (92)
  • KC9105 (90)
  • KC9110 (109)
  • KC9120 (91)
  • KC9125 (94)
  • KC9125RR (3)
  • KC9140 (68)
  • KC9145 (56)
  • KC9210 (14)
  • KC9215 (66)
  • KC9225 (92)
  • KC9240 (88)
  • KC9240NEW (88)
  • KC9245 (66)
  • KC9315 (94)
  • KC9320 (103)
  • KC9325 (77)
  • KC935 (109)
  • KC950 (97)
  • KC990 (80)
  • KCD25 (27)
  • KCK05 (94)
  • KCK05B (81)
  • KCK15 (87)
  • KCK15B (94)
  • KCK20 (101)
  • KCK20B (103)
  • KCM15 (88)
  • KCM15B (92)
  • KCM25 (92)
  • KCM25B (86)
  • KCM35 (78)
  • KCM35B (62)
  • KCP05 (83)
  • KCP05B (71)
  • KCP10 (94)
  • KCP10B (109)
  • KCP15 (10)
  • KCP25 (94)
  • KCP25B (109)
  • KCP25C (94)
  • KCP30 (90)
  • KCP30B (61)
  • KCP40 (51)
  • KCP40B (70)
  • KCPK05 (62)
  • KCS10 (40)
  • KCS10B (88)
  • KCU10 (109)
  • KCU10B (94)
  • KCU25 (105)
  • KD050 (53)
  • KD081 (59)
  • KD100 (47)
  • KD120 (43)
  • KD1400 (48)
  • KD1405 (33)
  • KD1425 (62)
  • KM1 (21)
  • KMF (18)
  • KS15 (22)
  • KT1120 (17)
  • KT125 (47)
  • KT150 (30)
  • KT175 (74)
  • KT315 (96)
  • KT325 (62)
  • KT5020 (3)
  • KTP10 (24)
  • KU10 (22)
  • KU10T (90)
  • KU25T (19)
  • KU30T (103)
  • KY1310 (32)
  • KY1320 (54)
  • KY1540 (28)
  • KY1615 (51)
  • KY2000 (32)
  • KY2100 (23)
  • KY3000 (64)
  • KY3400 (37)
  • KY3500 (54)
  • KY4000 (28)
  • KY4300 (29)
  • KY4400 (54)
  • KYHK15B (54)
  • KYK10 (26)
  • KYK25 (37)
  • KYK35 (54)
  • KYS25 (28)
  • KYS30 (31)
  • NL200 (32)
  • NL250 (62)
  • NL300 (46)
  • NL400 (30)
  • NL920 (50)
  • P25 (27)
  • PB100 (21)
  • PB170 (18)
  • PB250 (21)
  • PB300 (18)
  • PD100 (12)
  • PD50 (4)
  • PN120 (1)
  • PS5 (40)
  • SP0819 (46)
  • SP0A00 (3)
  • SP3019 (33)
  • SP4019 (37)
  • SP4036 (3)
  • SP4066 (2)
  • SP4093 (3)
  • SP61EJ (3)
  • SPADAP (5)
  • SPN3W1 (8)
  • SPSREJ (2)
  • THM (60)
  • THM-X (46)
  • THMF-X (21)
  • TN10P (96)
  • TN10U (65)
  • TN15M (78)
  • TN15U (65)
  • TN2000 (66)
  • TN20K (80)
  • TN20P (90)
  • TN30M (86)
  • TN30P (51)
  • TN4000 (63)
  • TN5015 (70)
  • TN5020 (77)
  • TN5105 (59)
  • TN5120 (79)
  • TN6010 (63)
  • TN6025 (74)
  • TN7005 (68)
  • TN7010 (83)
  • TN7015 (83)
  • TN7025 (83)
  • TN7035 (71)
  • TN7105 (67)
  • TN7110 (94)
  • TN7115 (79)
  • TN7125 (79)
  • TN7135 (71)
  • TN8025 (71)
  • TTI15 (61)
  • TTM (8)
  • TTM09 (3)
  • TTR (32)
  • TTS (49)
  • TTX (54)
  • W00342 (4)
  • WBH10C (64)
  • WBH10P (45)
  • WBH10U (51)
  • WBH20P (55)
  • WBH25P (48)
  • WBH25U (51)
  • WBH30P (45)
  • WBK40U (29)
  • WBK45U (45)
  • WDN00U (28)
  • WDN25U (48)
  • WK05CT (78)
  • WK15CT (63)
  • WK20CT (88)
  • WM15CT (86)
  • WM25CT (86)
  • WM35CT (64)
  • WP05CT (21)
  • WP15CT (88)
  • WP20TT (11)
  • WP25CT (88)
  • WP35CT (88)
  • WS10PT (73)
  • WS25PT (75)
  • WU05PT (12)
  • WU10HT (90)
  • WU10PT (75)
  • WU25PT (79)
  • X00511 (18)
  • X00580 (18)
  • X00581 (18)
  • X00582 (18)
  • X00583 (18)
  • X00584 (18)
  • X00585 (18)
  • X00586 (18)
  • X00591 (18)
  • X00592 (18)
  • X00593 (18)
  • X00594 (18)
  • X00596 (18)
  • X00597 (18)
  • X00599 (18)
Hand Of Tool
Hand Of Tool
  • L (34)
  • N (2)
  • R (39)
Wiper Insert
Wiper Insert
  • N (119)
  • Y (57)
F Dimension
F Dimension
  • 0.0 mm (2)
  • 11.0 mm (4)
  • 12.0 mm (2)
  • 13.0 mm (5)
  • 14.0 mm (1)
  • 17.0 mm (16)
  • 18.0 mm (2)
  • 22.0 mm (8)
  • 27.0 mm (13)
  • 35.0 mm (22)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.0 in (2)
  • 0.433 in (4)
  • 0.473 in (2)
  • 0.512 in (5)
  • 0.551 in (1)
  • 0.669 in (16)
  • 0.709 in (2)
  • 0.866 in (8)
  • 1.063 in (13)
  • 1.379 in (22)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (3)
  • 20.0 mm (6)
  • 24.0 mm (1)
  • 25.0 mm (5)
  • 32.0 mm (14)
  • 33.0 mm (3)
  • 33.5 mm (1)
  • 38.5 mm (2)
  • 40.0 mm (6)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 48.5 mm (1)
  • 50.0 mm (7)
  • 52.5 mm (1)
  • 57.2 mm (1)
  • 62.0 mm (3)
  • 63.0 mm (7)
  • 64.0 mm (2)
  • 65.0 mm (6)
  • 65.5 mm (1)
  • 66.0 mm (1)
  • 80.0 mm (2)
  • 88.9 mm (2)
  • 110.0 mm (27)
  • 125.0 mm (7)
  • 139.701 mm (2)
  • 165.0 mm (1)
  • 174.601 mm (2)
  • 209.601 mm (1)
  • 222.3 mm (1)
  • 223.0 mm (2)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (3)
  • 0.787 in (6)
  • 0.946 in (1)
  • 0.984 in (5)
  • 1.26 in (14)
  • 1.299 in (3)
  • 1.319 in (1)
  • 1.516 in (2)
  • 1.575 in (6)
  • 1.627 in (2)
  • 1.874 in (2)
  • 1.909 in (1)
  • 1.969 in (7)
  • 2.067 in (1)
  • 2.253 in (1)
  • 2.441 in (3)
  • 2.48 in (7)
  • 2.52 in (2)
  • 2.559 in (6)
  • 2.579 in (1)
  • 2.598 in (1)
  • 3.15 in (2)
  • 3.5 in (2)
  • 4.331 in (27)
  • 4.921 in (7)
  • 5.5 in (2)
  • 6.496 in (1)
  • 6.875 in (2)
  • 8.252 in (1)
  • 8.752 in (1)
  • 8.78 in (2)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (15)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (15)
Maximum Axial Groove Diameter Min komu Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (23)
  • E (27)
  • S (25)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (42)
  • NEGATIVE-ZERO (15)
  • NEUTRAL (ZERO) (8)
Maximum Bore Depth
Maximum Bore Depth
  • 1.417 in (3)
  • 1.811 in (3)
  • 1.85 in (2)
  • 1.969 in (1)
  • 2.008 in (1)
  • 2.047 in (8)
  • 2.205 in (4)
  • 2.362 in (34)
  • 2.441 in (2)
  • 2.52 in (3)
  • 2.559 in (2)
  • 2.598 in (5)
  • 2.638 in (10)
  • 3.15 in (1)
  • 3.465 in (6)
  • 3.48 in (1)
  • 3.938 in (2)
  • 4.449 in (2)
  • 4.646 in (2)
  • 4.686 in (4)
  • 5.906 in (5)