Vnější obrábění
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (1791)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1791)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1791)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1791)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1791)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1791)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1791)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1791)
- M Stainless Steel (1773)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1773)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1773)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1773)
- K Cast Iron (1882)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1882)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1877)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1832)
- N Non-Ferrous Materials (1650)
- N1Wrought Aluminum (1603)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1603)
- N3High-Silicon Aluminum Alloys Si >12.2%(815)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1650)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1552)
- N6Carbon, Graphite Composites, CFRP (1456)
- N7MMC's (1483)
- S High-Temp Alloys (1859)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1854)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1859)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1854)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1783)
- H Hardened Materials (1500)
- H1Hardened Materials 44-48 HRC(1500)
- H2Hardened Materials 48-55 HRC(1500)
- H3Hardened Materials 56-60 HRC(1500)
- H4Hardened Materials >60 HRC(1146)
Vybrat první volbu
- CN (113)
- DE (111)
- GB (56)
- IN (2)
- SG (16)
- US (136)
Applications
Applications
Chamfer Turning (49)
Facing (1217)
ID Facing (2)
Multiple Direction Cutting (1280)
Plunge Turning (55)
Profiling (1166)
TRN Boring (331)
Turning (1774)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1851)
- Lightly Interrupted Cut (1887)
- Smooth Cut (1889)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (197)
- 48.0 (6)
- 49.783 (2)
- 50.0 (24)
- 60.0 (16)
- 62.5 (27)
- 63.0 (19)
- 72.5 (25)
- 75.0 (292)
- 85.0 (7)
- 90.0 (351)
- 93.0 (447)
- 95.0 (389)
- 97.5 (1)
- 105.0 (1)
- 107.5 (88)
- 117.5 (14)
komu
Connection Style
Connection Style
- KM (261)
- Toolholder (1329)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (26)
- 1.0 (1000)
- 2.0 (1077)
- 3.0 (296)
- 4.0 (1208)
- 6.0 (268)
- 8.0 (640)
komu
Over All Length [L]
Over All Length [L]
- 35.0 mm(36)
- 40.0 mm(108)
- 45.0 mm(33)
- 47.0 mm(2)
- 50.0 mm(147)
- 55.0 mm(1)
- 60.0 mm(179)
- 63.5 mm(22)
- 70.0 mm(62)
- 80.0 mm(4)
- 82.55 mm(1)
- 87.5 mm(2)
- 88.9 mm(34)
- 93.0 mm(2)
- 93.5 mm(2)
- 95.0 mm(2)
- 96.0 mm(2)
- 97.0 mm(6)
- 98.0 mm(2)
- 99.5 mm(2)
- 100.0 mm(49)
- 101.6 mm(29)
- 103.0 mm(2)
- 104.0 mm(2)
- 105.0 mm(2)
- 105.5 mm(2)
- 107.0 mm(2)
- 108.0 mm(2)
- 109.0 mm(8)
- 110.0 mm(2)
- 114.295 mm(1)
- 114.3 mm(117)
- 115.0 mm(9)
- 116.0 mm(2)
- 121.0 mm(2)
- 124.99 mm(2)
- 125.0 mm(105)
- 126.25 mm(1)
- 127.0 mm(65)
- 141.5 mm(2)
- 141.69 mm(2)
- 149.99 mm(1)
- 150.0 mm(227)
- 151.25 mm(3)
- 152.4 mm(393)
- 160.0 mm(21)
- 161.69 mm(4)
- 169.99 mm(2)
- 170.0 mm(126)
- 170.03 mm(2)
- 171.0 mm(1)
- 171.25 mm(9)
- 172.5 mm(2)
- 177.8 mm(26)
- 200.0 mm(5)
- 203.2 mm(10)
- 250.0 mm(16)
- 457.2 mm(1)
komu
Corner Radius
Corner Radius
- 0.0 in(198)
- 0.001 in(198)
- 0.002 in(236)
- 0.003 in(59)
- 0.004 in(842)
- 0.008 in(875)
- 0.012 in(12)
- 0.014 in(120)
- 0.016 in(1437)
- 0.024 in(62)
- 0.03 in(21)
- 0.031 in(1701)
- 0.047 in(1546)
- 0.063 in(1165)
- 0.094 in(342)
- 0.118 in(1)
- 0.125 in(83)
- 0.126 in(107)
- 0.157 in(68)
- 0.188 in(22)
- 0.197 in(11)
- 0.236 in(11)
- 0.25 in(61)
- 0.313 in(4)
- 0.315 in(5)
- 0.375 in(7)
- 0.394 in(4)
- 0.492 in(6)
- 0.5 in(3)
- 0.63 in(2)
komu
Corner Radius
Corner Radius
- 0.0 mm(198)
- 0.025 mm(198)
- 0.05 mm(236)
- 0.075 mm(59)
- 0.1 mm(842)
- 0.2 mm(875)
- 0.3 mm(12)
- 0.35 mm(120)
- 0.4 mm(1437)
- 0.6 mm(62)
- 0.75 mm(21)
- 0.8 mm(1701)
- 1.2 mm(1546)
- 1.6 mm(1165)
- 2.375 mm(101)
- 2.4 mm(342)
- 3.0 mm(1)
- 3.175 mm(83)
- 3.2 mm(107)
- 4.0 mm(68)
- 4.775 mm(22)
- 5.0 mm(11)
- 6.0 mm(11)
- 6.35 mm(61)
- 7.95 mm(4)
- 8.0 mm(5)
- 9.525 mm(7)
- 10.0 mm(4)
- 12.5 mm(6)
- 12.7 mm(3)
- 16.0 mm(2)
komu
Corner Chamfer
Corner Chamfer
- 0.0 mm(1)
komu
application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- AC5 (13)
- CW2015 (296)
- CW3020 (15)
- CW5025 (187)
- GH1 (20)
- K060 (165)
- K090 (202)
- K1 (60)
- K313 (1493)
- K68 (1234)
- KB1340 (382)
- KB1345 (475)
- KB1610 (709)
- KB1630 (552)
- KB5610 (489)
- KB5630 (564)
- KB9640 (37)
- KBH10 (975)
- KBH10B (1009)
- KBH20 (1026)
- KBH20B (1013)
- KBK45 (31)
- KC5010 (1728)
- KC5020P (72)
- KC5025 (1478)
- KC5410 (1228)
- KC730 (1344)
- KC850 (1648)
- KC9125 (48)
- KCK05 (1213)
- KCK05B (565)
- KCK15 (1366)
- KCK15B (1440)
- KCK20 (1454)
- KCK20B (1373)
- KCM15 (1324)
- KCM15B (1342)
- KCM25 (1497)
- KCM25B (1508)
- KCM25S (155)
- KCM35 (1333)
- KCM35B (720)
- KCP05 (1048)
- KCP05B (962)
- KCP10 (1561)
- KCP10B (1622)
- KCP10C (1576)
- KCP15 (38)
- KCP20S (155)
- KCP25 (1552)
- KCP25B (1667)
- KCP25C (1763)
- KCP30 (1505)
- KCP30B (926)
- KCP40 (1016)
- KCP40B (1139)
- KCPK05 (1077)
- KCS10 (582)
- KCS10B (1466)
- KCS25S (155)
- KCU10 (1700)
- KCU10B (1729)
- KCU25 (1527)
- KCU25B (1551)
- KD1400 (714)
- KD1405 (402)
- KD1425 (808)
- KM1 (12)
- KMF (20)
- KN10S (198)
- KS15 (165)
- KT125 (20)
- KT315 (1160)
- KT325 (456)
- KTP10 (1121)
- KTP25S (887)
- KY1540 (243)
- KY1615 (119)
- KY3500 (1108)
- KY4300 (495)
- KY4400 (968)
- KYHK15B (1140)
- KYK10 (482)
- KYK25 (707)
- KYS25 (363)
- KYS30 (531)
- MC3 (18)
- PB100 (39)
- PB250 (7)
- SP0819 (1024)
- SP4019 (954)
- THM (227)
- THM-X (170)
- THMF-X (108)
- TN10P (330)
- TN10U (242)
- TN15M (212)
- TN15U (183)
- TN2000 (281)
- TN20K (367)
- TN20P (409)
- TN30M (248)
- TN30P (277)
- TN4000 (265)
- TN6010 (115)
- TN6025 (15)
- TTM09 (6)
- TTR (13)
- TTR-X (25)
- TTS (134)
- WBH10P (127)
- WBH10U (41)
- WBH20P (283)
- WBH30P (127)
- WBK40U (47)
- WBK45U (43)
- WDN00U (77)
- WDN25U (174)
- WK05CT (403)
- WK15CT (252)
- WK20CT (451)
- WM15CT (397)
- WM25CT (441)
- WM35CT (355)
- WP05CT (57)
- WP15CT (460)
- WP20TT (13)
- WP25CT (460)
- WP35CT (399)
- WS10PT (403)
- WS25PT (418)
- WU05PT (30)
- WU10HT (405)
- WU10PT (319)
- WU25PT (319)
- X00580 (165)
- X00581 (165)
- X00582 (165)
- X00583 (165)
- X00584 (165)
- X00585 (165)
- X00586 (165)
- X00591 (165)
- X00592 (165)
- X00593 (165)
- X00594 (165)
- X00596 (165)
- X00597 (165)
- X00599 (165)
- YY87EL (20)
Hand Of Tool
Hand Of Tool
- L (637)
- N (209)
- R (744)
Wiper Insert
Wiper Insert
- N (1893)
- Y (597)
F Dimension
F Dimension
- 0.0 mm(41)
- 4.0 mm(1)
- 4.762 mm(3)
- 5.0 mm(2)
- 6.0 mm(5)
- 6.35 mm(7)
- 7.925 mm(2)
- 7.938 mm(2)
- 7.94 mm(1)
- 8.0 mm(8)
- 9.43 mm(1)
- 9.52 mm(15)
- 9.525 mm(11)
- 9.75 mm(1)
- 9.959 mm(1)
- 10.0 mm(21)
- 11.0 mm(1)
- 11.12 mm(1)
- 11.15 mm(2)
- 11.684 mm(1)
- 12.0 mm(23)
- 12.23 mm(1)
- 12.25 mm(1)
- 12.5 mm(23)
- 12.598 mm(2)
- 12.6 mm(3)
- 12.62 mm(1)
- 12.7 mm(64)
- 12.701 mm(1)
- 13.0 mm(5)
- 13.64 mm(2)
- 13.76 mm(1)
- 13.764 mm(1)
- 13.767 mm(1)
- 13.92 mm(1)
- 13.95 mm(1)
- 14.0 mm(1)
- 14.275 mm(1)
- 14.418 mm(1)
- 15.0 mm(1)
- 15.494 mm(1)
- 15.5 mm(1)
- 15.773 mm(2)
- 15.799 mm(1)
- 15.87 mm(1)
- 15.875 mm(18)
- 15.88 mm(29)
- 16.0 mm(32)
- 16.5 mm(2)
- 16.82 mm(1)
- 17.0 mm(5)
- 17.02 mm(2)
- 17.09 mm(1)
- 17.25 mm(1)
- 17.475 mm(1)
- 17.5 mm(2)
- 17.78 mm(1)
- 18.5 mm(2)
- 18.95 mm(2)
- 19.05 mm(29)
- 19.075 mm(2)
- 19.167 mm(1)
- 19.5 mm(1)
- 19.685 mm(1)
- 19.688 mm(1)
- 19.863 mm(1)
- 19.866 mm(2)
- 20.0 mm(41)
- 20.167 mm(1)
- 20.5 mm(3)
- 20.638 mm(1)
- 21.031 mm(2)
- 21.08 mm(2)
- 22.0 mm(31)
- 22.22 mm(2)
- 22.225 mm(5)
- 22.3 mm(1)
- 22.352 mm(2)
- 23.16 mm(2)
- 23.165 mm(5)
- 23.7 mm(1)
- 24.0 mm(11)
- 24.26 mm(2)
- 25.0 mm(93)
- 25.197 mm(2)
- 25.4 mm(83)
- 25.5 mm(1)
- 25.908 mm(4)
- 25.91 mm(1)
- 26.0 mm(1)
- 26.416 mm(1)
- 26.62 mm(2)
- 26.924 mm(2)
- 27.0 mm(68)
- 27.381 mm(2)
- 28.016 mm(2)
- 28.575 mm(2)
- 28.58 mm(4)
- 28.65 mm(2)
- 28.7 mm(3)
- 29.718 mm(2)
- 29.72 mm(2)
- 30.0 mm(19)
- 31.75 mm(181)
- 31.775 mm(6)
- 32.0 mm(254)
- 32.258 mm(4)
- 32.26 mm(2)
- 32.276 mm(1)
- 32.5 mm(1)
- 33.55 mm(2)
- 34.366 mm(2)
- 35.0 mm(37)
- 35.006 mm(1)
- 35.25 mm(1)
- 38.0 mm(17)
- 38.1 mm(81)
- 38.125 mm(3)
- 38.13 mm(1)
- 38.379 mm(2)
- 38.608 mm(2)
- 40.0 mm(37)
- 40.5 mm(8)
- 43.0 mm(39)
- 44.958 mm(1)
- 46.25 mm(3)
- 48.0 mm(9)
- 50.0 mm(9)
- 50.8 mm(43)
- 50.826 mm(1)
- 53.0 mm(23)
- 57.15 mm(1)
- 57.658 mm(1)
- 59.0 mm(2)
- 63.5 mm(2)
komu
Minimum Bore Diameter
Minimum Bore Diameter
- 16.0 mm(1)
- 106.0 mm(10)
- 118.0 mm(2)
komu
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(1)
- 40.0 mm(4)
- 44.0 mm(12)
- 50.0 mm(30)
- 54.0 mm(30)
- 60.0 mm(2)
- 63.0 mm(16)
- 70.0 mm(38)
- 74.0 mm(4)
- 80.0 mm(48)
- 86.0 mm(68)
- 90.0 mm(6)
- 94.0 mm(2)
- 100.0 mm(35)
- 104.0 mm(2)
- 106.0 mm(29)
- 118.0 mm(2)
- 120.0 mm(2)
- 150.0 mm(1)
komu
Cutting Direction
Cutting Direction
- B (378)
- E (203)
- P (2)
- S (1007)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (871)
- DOUBLE POSITIVE (36)
- NEGATIVE-ZERO (155)
- NEUTRAL (ZERO) (397)
- POSITIVE-ZERO (65)
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(20)
- 40.0 mm(63)
- 45.0 mm(16)
- 48.0 mm(1)
- 50.0 mm(86)
- 55.0 mm(1)
- 60.0 mm(101)
- 70.0 mm(37)
- 115.0 mm(7)
komu
Boring Bar Material
Boring Bar Material
- S (13)
frontEnd
Clamp Style
Clamp Style
- C (168)
- D (265)
- M (707)
- N (35)
- P (301)
- S (408)
- W (8)
- X (15)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (495)
- D-DIAMOND/RHOMBIC 55 (381)
- E-DIAMOND/RHOMBIC 75 (1)
- R-ROUND (162)
- S-SQUARE 90 (319)
- T-TRIANGLE 60 (260)
- V-DIAMOND/RHOMBIC 35 (191)
- W-TRIGON 80 (98)
Maximum Cutting Depth
Maximum Cutting Depth
- 6.35 mm(3)
- 7.0 mm(3)
- 7.85 mm(2)
- 8.0 mm(2)
- 10.16 mm(2)
- 10.414 mm(1)
- 10.922 mm(2)
- 11.8 mm(2)
- 12.0 mm(1)
- 12.13 mm(2)
- 12.72 mm(2)
- 15.88 mm(1)
- 16.0 mm(5)
- 19.0 mm(1)
- 19.05 mm(4)
- 20.0 mm(4)
- 20.574 mm(3)
- 24.0 mm(2)
- 25.0 mm(4)
- 25.4 mm(15)
- 25.908 mm(4)
- 28.702 mm(1)
- 29.0 mm(1)
- 31.75 mm(3)
- 32.0 mm(1)
- 33.0 mm(2)
- 35.051 mm(1)
- 35.052 mm(4)
- 38.0 mm(2)
- 38.1 mm(4)
- 40.15 mm(2)
- 47.32 mm(1)
- 47.625 mm(2)
- 59.004 mm(1)
- 60.046 mm(1)
- 60.3 mm(1)
- 78.0 mm(1)
komu
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (1011)
- B L (1026)
- C A (1217)
- C N (1150)
- D P (948)
- H T (1180)
- H W (1834)
backEnd
Connection Type
Connection Type
- SQUARE SHANK (1329)
- TAPER SHANK (261)
System Size
System Size
- KM32 (15)
- KM32TS (6)
- KM40TS (66)
- KM50TS (56)
- KM63TS (78)
- KM63UT (1)
- KM80TS (39)
Back-End Diameter
Back-End Diameter
- 12.0 mm(1)
- 32.0 mm(41)
- 40.0 mm(145)
- 50.0 mm(145)
- 63.0 mm(182)
- 80.0 mm(64)
komu
Shank Height
Shank Height
- 7.938 mm(2)
- 8.0 mm(1)
- 9.52 mm(22)
- 9.525 mm(12)
- 10.0 mm(10)
- 12.0 mm(36)
- 12.7 mm(72)
- 15.875 mm(13)
- 15.88 mm(30)
- 16.0 mm(57)
- 19.05 mm(100)
- 20.0 mm(123)
- 25.0 mm(236)
- 25.4 mm(244)
- 31.75 mm(140)
- 32.0 mm(146)
- 38.1 mm(61)
- 40.0 mm(21)
- 50.8 mm(3)
komu
Shank Width
Shank Width
- 7.938 mm(2)
- 8.0 mm(1)
- 9.52 mm(21)
- 9.525 mm(13)
- 10.0 mm(11)
- 12.0 mm(36)
- 12.7 mm(73)
- 14.0 mm(1)
- 15.875 mm(15)
- 15.88 mm(29)
- 16.0 mm(57)
- 18.0 mm(1)
- 19.05 mm(103)
- 20.0 mm(122)
- 25.0 mm(317)
- 25.4 mm(260)
- 31.75 mm(122)
- 32.0 mm(65)
- 38.1 mm(58)
- 40.0 mm(19)
- 50.8 mm(3)
komu
No filters matching ""
