Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Screw-On • S-Style Clamping • For Positive Style Inserts

Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (390)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (390)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (390)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (390)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (390)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (390)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (390)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (390)
  • M Stainless Steel (390)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (390)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (390)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (390)
  • K Cast Iron (390)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (390)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (390)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (390)
  • N Non-Ferrous Materials (390)
    • N1
      Wrought Aluminum (390)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (390)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (277)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (390)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (390)
    • N6
      Carbon, Graphite Composites, CFRP (390)
    • N7
      MMC's (343)
  • S High-Temp Alloys (390)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (390)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (390)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (390)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (390)
  • H Hardened Materials (333)
    • H1
      Hardened Materials 44-48 HRC (333)
    • H2
      Hardened Materials 48-55 HRC (333)
    • H3
      Hardened Materials 56-60 HRC (306)
    • H4
      Hardened Materials >60 HRC (298)
  • C CFRP Materials (390)
    • C1
      CFRP, CFRP / CFRP (390)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (343)
Vybrat první volbu
  • CN (62)
  • DE (60)
  • GB (39)
  • IN (2)
  • SG (10)
  • US (77)
Applications
Applications
  • Facing Facing (201)
  • Multiple Direction Cutting Multiple Direction Cutting (317)
  • Profiling Profiling (299)
  • TRN Boring TRN Boring (24)
  • Turning Turning (381)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (385)
  • Lightly Interrupted Cut (390)
  • Smooth Cut (390)
  • Varying Depth of Cut (390)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (32)
  • 50.0 (9)
  • 62.5 (13)
  • 72.5 (7)
  • 75.0 (10)
  • 90.0 (122)
  • 93.0 (110)
  • 95.0 (65)
  • 107.5 (24)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (27)
  • Toolholder (341)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (341)
  • 2.0 (274)
  • 3.0 (41)
  • 4.0 (118)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.379 in (10)
  • 1.575 in (24)
  • 1.772 in (1)
  • 1.85 in (2)
  • 1.969 in (6)
  • 2.362 in (8)
  • 2.5 in (22)
  • 3.25 in (1)
  • 3.5 in (32)
  • 3.938 in (35)
  • 4.0 in (18)
  • 4.5 in (32)
  • 4.921 in (41)
  • 5.906 in (56)
  • 6.0 in (80)
  • 6.299 in (21)
  • 6.694 in (3)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 35.0 mm (10)
  • 40.0 mm (24)
  • 45.0 mm (1)
  • 47.0 mm (2)
  • 50.0 mm (6)
  • 60.0 mm (8)
  • 63.5 mm (22)
  • 82.551 mm (1)
  • 88.9 mm (32)
  • 100.0 mm (35)
  • 101.601 mm (18)
  • 114.301 mm (32)
  • 125.0 mm (41)
  • 150.0 mm (56)
  • 152.4 mm (80)
  • 160.0 mm (21)
  • 170.0 mm (3)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (81)
  • 0.001 in (186)
  • 0.002 in (256)
  • 0.004 in (303)
  • 0.008 in (303)
  • 0.016 in (331)
  • 0.031 in (332)
  • 0.047 in (205)
  • 0.063 in (47)
  • 0.119 in (1)
  • 0.125 in (12)
  • 0.157 in (7)
  • 0.187 in (13)
  • 0.188 in (13)
  • 0.197 in (9)
  • 0.237 in (8)
  • 0.25 in (6)
  • 0.315 in (2)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (81)
  • 0.025 mm (186)
  • 0.05 mm (256)
  • 0.1 mm (303)
  • 0.2 mm (303)
  • 0.4 mm (331)
  • 0.8 mm (332)
  • 1.201 mm (205)
  • 1.6 mm (47)
  • 3.0 mm (1)
  • 3.176 mm (12)
  • 4.0 mm (7)
  • 4.75 mm (13)
  • 4.775 mm (13)
  • 5.0 mm (9)
  • 6.0 mm (8)
  • 6.351 mm (6)
  • 8.0 mm (2)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (8)
  • AC5 (8)
  • CM3 (15)
  • CM5 (8)
  • CPX (8)
  • GH1 (55)
  • GH2 (7)
  • HCK10 (23)
  • HK1500 (21)
  • HK35 (28)
  • HT2 (278)
  • HTX (272)
  • HWK10 (1)
  • HWK15 (25)
  • K1010P (55)
  • K10M (246)
  • K10P (129)
  • K10U (274)
  • K15U (256)
  • K20K (173)
  • K25M (117)
  • K25P (123)
  • K313 (383)
  • K420 (13)
  • K68 (347)
  • KB1345 (116)
  • KB1610 (224)
  • KB1625 (109)
  • KB1630 (93)
  • KB5610 (244)
  • KB5625 (221)
  • KB5630 (196)
  • KB9610 (232)
  • KBH10 (236)
  • KBH20 (287)
  • KC250 (21)
  • KC5010 (390)
  • KC5020P (157)
  • KC5025 (356)
  • KC5410 (352)
  • KC710 (17)
  • KC720 (331)
  • KC730 (384)
  • KC7310 (17)
  • KC732 (328)
  • KC8050 (383)
  • KC810 (337)
  • KC850 (390)
  • KC9010 (207)
  • KC9025 (321)
  • KC910 (356)
  • KC9105 (320)
  • KC9110 (353)
  • KC9120 (203)
  • KC9125 (347)
  • KC9225 (331)
  • KC9240 (389)
  • KC9240NEW (389)
  • KC9315 (383)
  • KC9320 (343)
  • KC9325 (213)
  • KC935 (332)
  • KC950 (272)
  • KC990 (222)
  • KCD25 (285)
  • KCK05 (326)
  • KCK05B (245)
  • KCK15 (255)
  • KCK15B (298)
  • KCK20 (384)
  • KCK20B (372)
  • KCM15 (315)
  • KCM15B (247)
  • KCM25 (384)
  • KCM25B (328)
  • KCM25S (147)
  • KCM35 (260)
  • KCM35B (140)
  • KCP05 (326)
  • KCP05B (76)
  • KCP10 (334)
  • KCP10B (345)
  • KCP15 (34)
  • KCP20S (147)
  • KCP25 (379)
  • KCP25B (347)
  • KCP25C (384)
  • KCP30 (336)
  • KCP30B (79)
  • KCP40B (34)
  • KCPK05 (20)
  • KCS10 (383)
  • KCS10B (345)
  • KCS25S (147)
  • KCU10 (366)
  • KCU10B (390)
  • KCU25 (344)
  • KCU25B (356)
  • KD050 (165)
  • KD081 (142)
  • KD100 (57)
  • KD105 (23)
  • KD120 (23)
  • KD1400 (283)
  • KD1405 (57)
  • KD1425 (283)
  • KN10S (186)
  • KT125 (76)
  • KT150 (21)
  • KT175 (269)
  • KT315 (332)
  • KT325 (288)
  • KTP10 (290)
  • KTP25S (274)
  • KU10 (263)
  • KU10T (326)
  • KU30T (326)
  • KY1615 (8)
  • MC2 (8)
  • NL300 (22)
  • NL920 (26)
  • PB100 (20)
  • PB170 (14)
  • PB250 (27)
  • PD100 (22)
  • PD50 (20)
  • SP0G00 (3)
  • SP0PW3 (7)
  • SP4019 (26)
  • SP7779 (7)
  • SPMQMA (4)
  • SPN3W1 (2)
  • THM (56)
  • THM-X (22)
  • TN10P (43)
  • TN10U (43)
  • TN15M (38)
  • TN15U (28)
  • TN2000 (28)
  • TN20K (43)
  • TN20P (43)
  • TN30M (38)
  • TN4000 (11)
  • TN5015 (44)
  • TN5020 (47)
  • TN5105 (37)
  • TN5120 (50)
  • TN6010 (34)
  • TN6025 (27)
  • TN7005 (28)
  • TN7010 (50)
  • TN7015 (50)
  • TN7025 (50)
  • TN7035 (53)
  • TN7105 (45)
  • TN7110 (50)
  • TN7115 (50)
  • TN7125 (50)
  • TN7135 (49)
  • TN8025 (37)
  • TTI15 (28)
  • TTM (2)
  • TTM09 (22)
  • TTR (39)
  • TTS (2)
  • TTX (24)
  • W00342 (25)
  • WBH10C (21)
  • WBH10P (21)
  • WBH10U (21)
  • WBH20P (29)
  • WBH25P (21)
  • WBH25U (26)
  • WBH30P (21)
  • WBK45U (29)
  • WDN00U (2)
  • WDN25U (28)
  • WK05CT (37)
  • WK15CT (38)
  • WK20CT (50)
  • WM15CT (38)
  • WM25CT (43)
  • WP15CT (50)
  • WP20TT (13)
  • WP25CT (50)
  • WP35CT (42)
  • WS10PT (34)
  • WS25PT (27)
  • WU05PT (30)
  • WU10HT (39)
  • WU10PT (38)
  • WU25PT (38)
  • YY3A00 (16)
Hand Of Tool
Hand Of Tool
  • L (143)
  • N (53)
  • R (172)
Wiper Insert
Wiper Insert
  • N (390)
  • Y (94)
F Dimension
F Dimension
  • 0.0 mm (3)
  • 4.0 mm (1)
  • 4.75 mm (3)
  • 5.0 mm (2)
  • 6.0 mm (5)
  • 6.351 mm (5)
  • 7.926 mm (1)
  • 7.95 mm (1)
  • 8.0 mm (6)
  • 9.525 mm (17)
  • 10.0 mm (10)
  • 11.0 mm (1)
  • 11.125 mm (1)
  • 11.15 mm (2)
  • 12.0 mm (15)
  • 12.5 mm (3)
  • 12.701 mm (42)
  • 13.0 mm (4)
  • 13.65 mm (2)
  • 13.925 mm (1)
  • 13.951 mm (1)
  • 14.0 mm (1)
  • 14.275 mm (1)
  • 15.0 mm (1)
  • 15.875 mm (33)
  • 16.0 mm (26)
  • 16.5 mm (1)
  • 17.026 mm (2)
  • 17.1 mm (1)
  • 17.475 mm (1)
  • 17.5 mm (1)
  • 18.5 mm (1)
  • 18.95 mm (2)
  • 19.05 mm (13)
  • 20.0 mm (27)
  • 20.5 mm (1)
  • 20.651 mm (1)
  • 21.076 mm (2)
  • 22.0 mm (3)
  • 24.25 mm (2)
  • 25.0 mm (24)
  • 25.401 mm (15)
  • 25.901 mm (5)
  • 27.0 mm (11)
  • 31.75 mm (19)
  • 32.0 mm (28)
  • 32.25 mm (6)
  • 35.0 mm (4)
  • 38.1 mm (4)
  • 38.6 mm (2)
  • 43.0 mm (4)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.0 in (3)
  • 0.157 in (1)
  • 0.187 in (3)
  • 0.197 in (2)
  • 0.237 in (5)
  • 0.25 in (5)
  • 0.312 in (1)
  • 0.313 in (1)
  • 0.315 in (6)
  • 0.375 in (17)
  • 0.394 in (10)
  • 0.433 in (1)
  • 0.438 in (1)
  • 0.439 in (2)
  • 0.473 in (15)
  • 0.492 in (3)
  • 0.5 in (42)
  • 0.512 in (4)
  • 0.537 in (2)
  • 0.548 in (1)
  • 0.549 in (1)
  • 0.551 in (1)
  • 0.562 in (1)
  • 0.591 in (1)
  • 0.625 in (33)
  • 0.63 in (26)
  • 0.65 in (1)
  • 0.67 in (2)
  • 0.673 in (1)
  • 0.689 in (1)
  • 0.69 in (1)
  • 0.728 in (1)
  • 0.746 in (2)
  • 0.75 in (13)
  • 0.787 in (27)
  • 0.807 in (1)
  • 0.814 in (1)
  • 0.831 in (2)
  • 0.866 in (3)
  • 0.956 in (2)
  • 0.984 in (24)
  • 1.0 in (15)
  • 1.02 in (5)
  • 1.063 in (11)
  • 1.25 in (19)
  • 1.26 in (28)
  • 1.27 in (6)
  • 1.379 in (4)
  • 1.5 in (4)
  • 1.52 in (2)
  • 1.693 in (4)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 44.0 mm (7)
  • 50.0 mm (12)
  • 70.0 mm (2)
  • 86.0 mm (3)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.732 in (7)
  • 1.969 in (12)
  • 2.757 in (2)
  • 3.386 in (3)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (56)
  • E (49)
  • S (263)
Rake Angle Style
Rake Angle Style
  • DOUBLE POSITIVE (18)
  • NEUTRAL (ZERO) (339)
  • POSITIVE-ZERO (11)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (7)
  • 1.575 in (12)
  • 1.969 in (2)
  • 2.362 in (3)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (7)
  • 40.0 mm (12)
  • 50.0 mm (2)
  • 60.0 mm (3)
Maximum Bore Depth Min komu Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (106)
  • D-DIAMOND/RHOMBIC 55 (95)
  • R-ROUND (60)
  • S-SQUARE 90 (17)
  • T-TRIANGLE 60 (40)
  • V-DIAMOND/RHOMBIC 35 (73)
  • W-TRIGON 80 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.276 in (2)
  • 0.309 in (2)
  • 0.4 in (2)
  • 0.411 in (1)
  • 0.43 in (2)
  • 0.465 in (2)
  • 0.473 in (1)
  • 0.478 in (2)
  • 0.501 in (2)
  • 0.625 in (1)
  • 0.63 in (4)
  • 0.75 in (2)
  • 0.787 in (4)
  • 0.81 in (3)
  • 0.984 in (4)
  • 1.0 in (15)
  • 1.02 in (4)
  • 1.25 in (1)
  • 1.299 in (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 7.0 mm (2)
  • 7.851 mm (2)
  • 10.15 mm (2)
  • 10.425 mm (1)
  • 10.925 mm (2)
  • 11.8 mm (2)
  • 12.0 mm (1)
  • 12.125 mm (2)
  • 12.726 mm (2)
  • 15.875 mm (1)
  • 16.0 mm (4)
  • 19.05 mm (2)
  • 20.0 mm (4)
  • 20.576 mm (3)
  • 25.0 mm (4)
  • 25.401 mm (15)
  • 25.901 mm (4)
  • 31.75 mm (1)
  • 33.0 mm (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (259)
  • B L (298)
  • C A (8)
  • C N (2)
  • D P (290)
  • H T (340)
  • H W (390)
backEnd
Connection Type
Connection Type
  • SQUARE SHANK (341)
  • TAPER SHANK (27)
System Size
System Size
  • KM32 (3)
  • KM40TS (15)
  • KM50TS (4)
  • KM63TS (5)
Back-End Diameter
Back-End Diameter
  • 32.0 mm (10)
  • 40.0 mm (27)
  • 50.0 mm (6)
  • 63.0 mm (8)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.26 in (10)
  • 1.575 in (27)
  • 1.969 in (6)
  • 2.48 in (8)
Back-End Diameter Min komu Back-End Diameter Max
Shank Height
Shank Height
  • 0.313 in (2)
  • 0.315 in (1)
  • 0.375 in (34)
  • 0.394 in (10)
  • 0.473 in (34)
  • 0.5 in (59)
  • 0.625 in (31)
  • 0.63 in (43)
  • 0.75 in (19)
  • 0.787 in (32)
  • 0.984 in (33)
  • 1.0 in (27)
  • 1.25 in (11)
  • 1.26 in (3)
  • 1.5 in (2)
Shank Height Min komu Shank Height Max
Shank Height
Shank Height
  • 7.95 mm (2)
  • 8.0 mm (1)
  • 9.525 mm (34)
  • 10.0 mm (10)
  • 12.0 mm (34)
  • 12.701 mm (59)
  • 15.875 mm (31)
  • 16.0 mm (43)
  • 19.05 mm (19)
  • 20.0 mm (32)
  • 25.0 mm (33)
  • 25.401 mm (27)
  • 31.75 mm (11)
  • 32.0 mm (3)
  • 38.1 mm (2)
Shank Height Min komu Shank Height Max
Shank Width
Shank Width
  • 0.313 in (2)
  • 0.315 in (1)
  • 0.375 in (34)
  • 0.394 in (10)
  • 0.473 in (34)
  • 0.5 in (58)
  • 0.625 in (32)
  • 0.63 in (43)
  • 0.75 in (19)
  • 0.787 in (32)
  • 0.984 in (36)
  • 1.0 in (27)
  • 1.25 in (11)
  • 1.5 in (2)
Shank Width Min komu Shank Width Max
Shank Width
Shank Width
  • 7.95 mm (2)
  • 8.0 mm (1)
  • 9.525 mm (34)
  • 10.0 mm (10)
  • 12.0 mm (34)
  • 12.701 mm (58)
  • 15.875 mm (32)
  • 16.0 mm (43)
  • 19.05 mm (19)
  • 20.0 mm (32)
  • 25.0 mm (36)
  • 25.401 mm (27)
  • 31.75 mm (11)
  • 38.1 mm (2)
Shank Width Min komu Shank Width Max
No filters matching ""

KM™ Nástroje pro rychlou výměnu

(51) KM™ Nástroje pro rychlou výměnu

SDJC 93°

(18) SDJC 93°

SVVB 72,5°

(7) SVVB 72,5°

SVJB 93°

(14) SVJB 93°

SCLC 95°

(14) SCLC 95°

STGC 0°

(10) STGC 0°

SCRC 15°

(3) SCRC 15°

SDJC -3°

(14) SDJC -3°

SCGC 0°

(6) SCGC 0°

SCLC -5°

(18) SCLC -5°

SVJB -3°

(10) SVJB -3°

SVJB-F -3°

(6) SVJB-F -3°

SCLC-F -5°

(9) SCLC-F -5°

SDJC-F -3°

(8) SDJC-F -3°

SDAC 90°

(3) SDAC 90°

STJC-F 93°

(2) STJC-F 93°

STJC-F -3°

(3) STJC-F -3°
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?