Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Carbide Boring Bars

Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (184)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (184)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (184)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (184)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (184)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (184)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (184)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (184)
  • M Stainless Steel (184)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (184)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (184)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (184)
  • K Cast Iron (184)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (184)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (184)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (184)
  • N Non-Ferrous Materials (184)
    • N1
      Wrought Aluminum (184)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (184)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (140)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (184)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (184)
    • N6
      Carbon, Graphite Composites, CFRP (184)
    • N7
      MMC's (145)
  • S High-Temp Alloys (184)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (184)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (184)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (184)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (184)
  • H Hardened Materials (145)
    • H1
      Hardened Materials 44-48 HRC (145)
    • H2
      Hardened Materials 48-55 HRC (145)
    • H3
      Hardened Materials 56-60 HRC (140)
    • H4
      Hardened Materials >60 HRC (137)
  • C CFRP Materials (178)
    • C1
      CFRP, CFRP / CFRP (178)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous (145)
Vybrat první volbu
  • US (7)
Applications
Applications
  • Facing Facing (16)
  • ID Facing ID Facing (1)
  • Multiple Direction Cutting Multiple Direction Cutting (181)
  • Profiling Profiling (166)
  • TRN Boring TRN Boring (173)
  • Turning Turning (16)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (117)
  • Lightly Interrupted Cut (184)
  • Smooth Cut (184)
  • Varying Depth of Cut (180)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (39)
  • 93.0 (31)
  • 95.0 (110)
  • 97.0 (4)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (169)
  • KM (15)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (140)
  • 2.0 (113)
  • 3.0 (71)
  • 4.0 (43)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 2.375 in (2)
  • 2.5 in (2)
  • 2.75 in (1)
  • 3.0 in (1)
  • 3.15 in (2)
  • 3.375 in (2)
  • 3.543 in (4)
  • 3.938 in (1)
  • 3.95 in (4)
  • 3.96 in (3)
  • 4.0 in (14)
  • 4.331 in (5)
  • 4.375 in (1)
  • 4.851 in (2)
  • 4.852 in (2)
  • 4.892 in (1)
  • 4.912 in (1)
  • 5.0 in (6)
  • 5.513 in (4)
  • 5.876 in (1)
  • 5.906 in (1)
  • 5.955 in (4)
  • 6.0 in (43)
  • 7.0 in (2)
  • 7.037 in (1)
  • 7.057 in (2)
  • 7.087 in (2)
  • 7.136 in (2)
  • 7.875 in (2)
  • 7.931 in (2)
  • 7.974 in (2)
  • 8.0 in (13)
  • 9.9 in (5)
  • 10.0 in (33)
  • 12.0 in (11)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 60.325 mm (2)
  • 63.5 mm (2)
  • 69.851 mm (1)
  • 76.2 mm (1)
  • 80.0 mm (2)
  • 85.726 mm (2)
  • 90.0 mm (4)
  • 100.0 mm (1)
  • 100.325 mm (4)
  • 100.575 mm (3)
  • 101.601 mm (14)
  • 110.0 mm (5)
  • 111.125 mm (1)
  • 123.2 mm (2)
  • 123.25 mm (2)
  • 124.25 mm (1)
  • 124.75 mm (1)
  • 127.0 mm (6)
  • 140.0 mm (4)
  • 149.25 mm (1)
  • 150.0 mm (1)
  • 151.25 mm (4)
  • 152.4 mm (43)
  • 177.8 mm (2)
  • 178.75 mm (1)
  • 179.25 mm (2)
  • 180.0 mm (2)
  • 181.25 mm (2)
  • 200.0 mm (2)
  • 201.451 mm (2)
  • 202.55 mm (2)
  • 203.201 mm (13)
  • 251.451 mm (5)
  • 254.0 mm (33)
  • 304.8 mm (11)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (5)
  • 0.001 in (9)
  • 0.002 in (64)
  • 0.004 in (108)
  • 0.007 in (55)
  • 0.008 in (120)
  • 0.015 in (55)
  • 0.016 in (125)
  • 0.031 in (122)
  • 0.047 in (40)
  • 0.063 in (9)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (5)
  • 0.025 mm (9)
  • 0.05 mm (64)
  • 0.1 mm (108)
  • 0.176 mm (55)
  • 0.2 mm (120)
  • 0.375 mm (55)
  • 0.4 mm (125)
  • 0.775 mm (12)
  • 0.8 mm (110)
  • 1.201 mm (40)
  • 1.6 mm (9)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (7)
  • AC5 (4)
  • CG4 (4)
  • CG5 (7)
  • CG6 (3)
  • CM1 (7)
  • CM2 (7)
  • CM3 (7)
  • CM4 (4)
  • CM5 (7)
  • GX (7)
  • HT2 (9)
  • HTX (9)
  • K00379 (54)
  • K060 (4)
  • K090 (7)
  • K1 (4)
  • K10M (4)
  • K10P (4)
  • K10U (9)
  • K11 (4)
  • K15U (9)
  • K20K (4)
  • K21 (7)
  • K25M (4)
  • K2885 (4)
  • K313 (150)
  • K420 (46)
  • K45 (7)
  • K6 (7)
  • K68 (108)
  • KB1345 (33)
  • KB1610 (71)
  • KB1625 (15)
  • KB1630 (54)
  • KB5610 (63)
  • KB5625 (69)
  • KB5630 (42)
  • KB9610 (74)
  • KBH10 (9)
  • KBH20 (78)
  • KC210 (7)
  • KC250 (50)
  • KC5010 (184)
  • KC5025 (172)
  • KC5410 (99)
  • KC710 (87)
  • KC720 (103)
  • KC730 (179)
  • KC7310 (33)
  • KC732 (103)
  • KC740 (4)
  • KC8050 (106)
  • KC810 (108)
  • KC850 (125)
  • KC9010 (84)
  • KC9025 (119)
  • KC910 (108)
  • KC9105 (86)
  • KC9110 (117)
  • KC9120 (87)
  • KC9125 (110)
  • KC9225 (110)
  • KC9240 (102)
  • KC9240NEW (99)
  • KC9315 (117)
  • KC9320 (84)
  • KC9325 (78)
  • KC935 (167)
  • KC950 (93)
  • KC990 (103)
  • KCD25 (98)
  • KCK05 (105)
  • KCK05B (17)
  • KCK15 (81)
  • KCK15B (90)
  • KCK20 (105)
  • KCK20B (91)
  • KCM15 (97)
  • KCM15B (54)
  • KCM25 (113)
  • KCM25B (83)
  • KCM25S (9)
  • KCM35 (37)
  • KCM35B (5)
  • KCP05 (94)
  • KCP05B (5)
  • KCP10 (107)
  • KCP10B (103)
  • KCP20S (9)
  • KCP25 (113)
  • KCP25B (109)
  • KCP25C (114)
  • KCP30 (71)
  • KCP30B (5)
  • KCPK05 (21)
  • KCS10 (113)
  • KCS10B (87)
  • KCS25S (9)
  • KCU10 (173)
  • KCU10B (178)
  • KCU25 (155)
  • KCU25B (170)
  • KD050 (58)
  • KD081 (67)
  • KD100 (116)
  • KD105 (47)
  • KD120 (49)
  • KD1400 (133)
  • KD1405 (62)
  • KD1425 (140)
  • KM1 (7)
  • KMF (4)
  • KN10S (9)
  • KT125 (53)
  • KT150 (53)
  • KT175 (98)
  • KT315 (166)
  • KT325 (9)
  • KTP10 (94)
  • KTP25S (9)
  • KU10 (68)
  • KU10T (91)
  • KU30T (78)
  • KY1310 (4)
  • KY1540 (4)
  • KY1615 (7)
  • KY2000 (4)
  • KY3000 (4)
  • KY3500 (4)
  • KY4000 (4)
  • KY4300 (7)
  • KY4400 (7)
  • KYHK15B (7)
  • KYK10 (4)
  • KYK35 (4)
  • MC2 (7)
  • P10 (7)
  • P20 (4)
  • P25 (7)
  • P2F (4)
  • SP0A00 (4)
  • SP4200 (4)
  • SPM5F2 (42)
  • SPMQMA (20)
  • TTX (4)
  • W00162 (4)
  • WBH10C (4)
  • WBH10P (11)
  • WBH10U (11)
  • WBH25P (13)
  • WBH30P (11)
  • WDN00U (12)
  • WDN25U (15)
  • WK20CT (13)
  • WM15CT (13)
  • WM25CT (11)
  • WP15CT (11)
  • WP25CT (15)
  • YY87EL (4)
Hand Of Tool
Hand Of Tool
  • L (63)
  • R (121)
Wiper Insert
Wiper Insert
  • N (184)
  • Y (61)
F Dimension
F Dimension
  • 2.401 mm (4)
  • 2.651 mm (5)
  • 2.825 mm (3)
  • 2.975 mm (4)
  • 3.026 mm (6)
  • 3.176 mm (1)
  • 3.2 mm (2)
  • 3.426 mm (2)
  • 3.625 mm (1)
  • 3.676 mm (7)
  • 3.7 mm (2)
  • 3.725 mm (5)
  • 3.85 mm (2)
  • 3.95 mm (5)
  • 4.425 mm (2)
  • 4.7 mm (5)
  • 4.75 mm (3)
  • 4.801 mm (2)
  • 5.351 mm (1)
  • 5.575 mm (6)
  • 5.601 mm (1)
  • 5.801 mm (1)
  • 5.875 mm (4)
  • 6.351 mm (10)
  • 6.551 mm (1)
  • 6.601 mm (1)
  • 6.875 mm (5)
  • 6.926 mm (1)
  • 7.0 mm (2)
  • 7.926 mm (11)
  • 8.875 mm (5)
  • 9.0 mm (6)
  • 9.525 mm (2)
  • 10.3 mm (11)
  • 10.326 mm (2)
  • 10.875 mm (4)
  • 11.0 mm (7)
  • 11.101 mm (2)
  • 12.701 mm (17)
  • 12.875 mm (5)
  • 13.0 mm (4)
  • 14.275 mm (3)
  • 15.875 mm (2)
  • 16.25 mm (7)
  • 19.05 mm (2)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.095 in (4)
  • 0.105 in (5)
  • 0.111 in (3)
  • 0.117 in (4)
  • 0.12 in (6)
  • 0.125 in (1)
  • 0.126 in (2)
  • 0.135 in (2)
  • 0.144 in (1)
  • 0.145 in (7)
  • 0.146 in (2)
  • 0.147 in (5)
  • 0.152 in (2)
  • 0.156 in (5)
  • 0.175 in (2)
  • 0.185 in (5)
  • 0.187 in (3)
  • 0.189 in (2)
  • 0.211 in (1)
  • 0.219 in (6)
  • 0.221 in (1)
  • 0.228 in (1)
  • 0.231 in (4)
  • 0.25 in (10)
  • 0.258 in (1)
  • 0.26 in (1)
  • 0.271 in (5)
  • 0.273 in (1)
  • 0.276 in (2)
  • 0.312 in (11)
  • 0.35 in (5)
  • 0.354 in (6)
  • 0.375 in (2)
  • 0.406 in (11)
  • 0.408 in (2)
  • 0.428 in (4)
  • 0.433 in (7)
  • 0.437 in (2)
  • 0.5 in (17)
  • 0.507 in (5)
  • 0.512 in (4)
  • 0.562 in (3)
  • 0.625 in (2)
  • 0.64 in (7)
  • 0.75 in (2)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 4.575 mm (4)
  • 5.275 mm (5)
  • 5.551 mm (3)
  • 5.7 mm (4)
  • 5.95 mm (7)
  • 6.601 mm (1)
  • 6.775 mm (2)
  • 6.9 mm (1)
  • 6.976 mm (2)
  • 7.051 mm (1)
  • 7.075 mm (1)
  • 7.101 mm (4)
  • 7.25 mm (8)
  • 7.426 mm (2)
  • 7.525 mm (3)
  • 8.15 mm (2)
  • 8.8 mm (2)
  • 9.05 mm (4)
  • 9.1 mm (4)
  • 9.15 mm (1)
  • 9.201 mm (1)
  • 10.5 mm (1)
  • 10.55 mm (6)
  • 10.951 mm (1)
  • 11.0 mm (4)
  • 11.125 mm (1)
  • 12.201 mm (10)
  • 12.9 mm (1)
  • 13.0 mm (7)
  • 13.675 mm (1)
  • 15.25 mm (13)
  • 16.0 mm (11)
  • 18.55 mm (2)
  • 19.55 mm (13)
  • 20.0 mm (11)
  • 21.6 mm (2)
  • 23.625 mm (13)
  • 24.901 mm (3)
  • 25.0 mm (9)
  • 25.401 mm (2)
  • 30.225 mm (2)
  • 30.475 mm (5)
  • 31.0 mm (2)
  • 33.025 mm (2)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.18 in (4)
  • 0.209 in (5)
  • 0.219 in (3)
  • 0.224 in (4)
  • 0.234 in (7)
  • 0.26 in (1)
  • 0.267 in (2)
  • 0.272 in (1)
  • 0.275 in (2)
  • 0.278 in (1)
  • 0.279 in (1)
  • 0.28 in (4)
  • 0.286 in (8)
  • 0.292 in (2)
  • 0.296 in (3)
  • 0.321 in (2)
  • 0.347 in (2)
  • 0.356 in (4)
  • 0.358 in (4)
  • 0.36 in (1)
  • 0.362 in (1)
  • 0.414 in (1)
  • 0.416 in (6)
  • 0.431 in (1)
  • 0.433 in (4)
  • 0.438 in (1)
  • 0.48 in (10)
  • 0.508 in (1)
  • 0.512 in (7)
  • 0.538 in (1)
  • 0.6 in (13)
  • 0.63 in (11)
  • 0.73 in (2)
  • 0.77 in (13)
  • 0.787 in (11)
  • 0.85 in (2)
  • 0.93 in (13)
  • 0.98 in (3)
  • 0.984 in (9)
  • 1.0 in (2)
  • 1.19 in (2)
  • 1.2 in (5)
  • 1.22 in (2)
  • 1.3 in (2)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (110)
  • E (74)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (81)
  • NEUTRAL (ZERO) (26)
  • POSITIVE-NEGATIVE (6)
  • POSITIVE-ZERO (71)
Maximum Bore Depth
Maximum Bore Depth
  • 0.875 in (3)
  • 0.935 in (3)
  • 0.946 in (1)
  • 1.0 in (2)
  • 1.122 in (1)
  • 1.124 in (3)
  • 1.125 in (6)
  • 1.181 in (5)
  • 1.25 in (1)
  • 1.417 in (9)
  • 1.498 in (3)
  • 1.5 in (9)
  • 1.873 in (5)
  • 1.875 in (10)
  • 1.891 in (9)
  • 1.969 in (2)
  • 2.249 in (2)
  • 2.25 in (12)
  • 2.362 in (10)
  • 2.5 in (2)
  • 2.835 in (8)
  • 3.0 in (14)
  • 3.15 in (5)
  • 3.749 in (2)
  • 3.75 in (13)
  • 3.781 in (6)
  • 3.938 in (4)
  • 4.5 in (18)
  • 4.724 in (5)
  • 6.0 in (11)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 22.225 mm (3)
  • 23.75 mm (3)
  • 24.0 mm (1)
  • 25.401 mm (2)
  • 28.5 mm (1)
  • 28.55 mm (3)
  • 28.576 mm (6)
  • 30.0 mm (5)
  • 31.75 mm (1)
  • 36.0 mm (9)
  • 38.051 mm (3)
  • 38.1 mm (9)
  • 47.575 mm (5)
  • 47.625 mm (10)
  • 48.0 mm (9)
  • 50.0 mm (2)
  • 57.125 mm (2)
  • 57.151 mm (12)
  • 60.0 mm (10)
  • 63.5 mm (2)
  • 72.0 mm (8)
  • 76.2 mm (14)
  • 80.0 mm (5)
  • 95.226 mm (2)
  • 95.25 mm (13)
  • 96.0 mm (6)
  • 100.0 mm (4)
  • 114.301 mm (18)
  • 120.0 mm (5)
  • 152.4 mm (11)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (169)
  • S (15)
frontEnd
Clamp Style
Clamp Style
  • C (7)
  • S (177)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (93)
  • D-DIAMOND/RHOMBIC 55 (20)
  • T-TRIANGLE 60 (50)
  • W-TRIGON 80 (21)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.113 in (1)
  • 0.183 in (2)
  • 0.184 in (2)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 2.875 mm (1)
  • 4.65 mm (2)
  • 4.675 mm (2)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (127)
  • B L (152)
  • C A (7)
  • C N (7)
  • D P (152)
  • H T (173)
  • H W (184)
backEnd
Connection Type
Connection Type
  • BORING BAR (169)
  • TAPER SHANK (15)
System Size
System Size
  • KM50TS (15)
Back-End Diameter
Back-End Diameter
  • 3.95 mm (3)
  • 4.0 mm (1)
  • 4.75 mm (10)
  • 5.0 mm (5)
  • 6.0 mm (9)
  • 6.351 mm (12)
  • 7.926 mm (7)
  • 7.95 mm (6)
  • 8.0 mm (9)
  • 9.525 mm (14)
  • 10.0 mm (6)
  • 12.0 mm (12)
  • 12.701 mm (17)
  • 15.875 mm (16)
  • 16.0 mm (8)
  • 19.05 mm (18)
  • 20.0 mm (5)
  • 25.401 mm (11)
  • 50.0 mm (15)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.156 in (3)
  • 0.157 in (1)
  • 0.187 in (10)
  • 0.197 in (5)
  • 0.237 in (9)
  • 0.25 in (12)
  • 0.312 in (7)
  • 0.313 in (6)
  • 0.315 in (9)
  • 0.375 in (14)
  • 0.394 in (6)
  • 0.473 in (12)
  • 0.5 in (17)
  • 0.625 in (16)
  • 0.63 in (8)
  • 0.75 in (18)
  • 0.787 in (5)
  • 1.0 in (11)
  • 1.969 in (15)
Back-End Diameter Min komu Back-End Diameter Max
Shank Height
Shank Height
  • 0.449 in (7)
  • 0.606 in (6)
  • 0.764 in (5)
Shank Height Min komu Shank Height Max
Shank Height
Shank Height
  • 11.4 mm (7)
  • 15.4 mm (6)
  • 19.401 mm (5)
Shank Height Min komu Shank Height Max
No filters matching ""

Upnutí šroubem • Upínání S • Pro pozitivní břitové destičky

(177) Upnutí šroubem • Upínání S • Pro pozitivní břitové destičky

Kendex™ • Upínání C • Pro břitové destičky typu Kendex

(7) Kendex™ • Upínání C • Pro břitové destičky typu Kendex
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?