Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Získejte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Tvarové soustružení

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (1823)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1823)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1823)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1823)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1823)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1823)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1823)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1823)
    • M Stainless Steel (1713)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1713)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1713)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1713)
    • K Cast Iron (1604)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1604)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1600)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1595)
    • N Non-Ferrous Materials (1567)
      • N1
        Wrought Aluminum (1537)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1477)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(369)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (1567)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1491)
      • N6
        Carbon, Graphite Composites, CFRP (1462)
      • N7
        MMC's (333)
    • S High-Temp Alloys (1734)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1734)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1734)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1734)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1711)
    • H Hardened Materials (1161)
      • H1
        Hardened Materials 44-48 HRC(1161)
      • H2
        Hardened Materials 48-55 HRC(1080)
      • H3
        Hardened Materials 56-60 HRC(359)
      • H4
        Hardened Materials >60 HRC(359)
    • C CFRP Materials (230)
      • C1
        CFRP, CFRP / CFRP (215)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (143)
    Vybrat první volbu
    • BR (23)
    • CN (190)
    • DE (190)
    • GB (108)
    • IN (33)
    • SG (67)
    • US (278)
    Applications
    Applications
    • Back BoringBack Boring (187)
    • BoringBoring (285)
    • CRT ProfilingCRT Profiling (20)
    • Chamfer TurningChamfer Turning (69)
    • Cut-OffCut-Off (353)
    • Deep GroovingDeep Grooving (123)
    • Face GroovingFace Grooving (1005)
    • FacingFacing (264)
    • GroovingGrooving (1242)
    • ID FacingID Facing (200)
    • ID GroovingID Grooving (683)
    • ID Thread TurningID Thread Turning (69)
    • Multiple Direction CuttingMultiple Direction Cutting (578)
    • OD Thread TurningOD Thread Turning (127)
    • Plunge TurningPlunge Turning (530)
    • ProfilingProfiling (524)
    • TRN BoringTRN Boring (50)
    • ThreadingThreading (130)
    • TurningTurning (434)
    Type of Thread
    Type of Thread
    • 60 (187)
    • ACME (122)
    • API (114)
    • API RD (86)
    • BSW (78)
    • BUTTRESS (182)
    • M (114)
    • NPT (78)
    • STUB ACME (78)
    • UN (182)
    • UNJ (78)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (1187)
    • Lightly Interrupted Cut (1439)
    • Smooth Cut (1626)
    • Varying Depth of Cut (1507)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (12)
    • 60.0 (4)
    • 62.5 (2)
    • 72.5 (2)
    • 90.0 (831)
    • 92.25 (27)
    • 93.0 (1)
    • 95.0 (77)
    • 100.0 (1)
    • 107.5 (9)
    • 117.5 (8)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (8)
    • Boring Bar Shank (212)
    • Toolholder (486)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (836)
    • 2.0 (1303)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.75 in(2)
    • 1.625 in(6)
    • 1.881 in(10)
    • 1.954 in(4)
    • 2.037 in(8)
    • 2.077 in(31)
    • 2.138 in(5)
    • 2.156 in(47)
    • 2.165 in(1)
    • 2.192 in(1)
    • 2.269 in(21)
    • 2.274 in(4)
    • 2.347 in(4)
    • 2.352 in(14)
    • 2.431 in(6)
    • 2.5 in(4)
    • 2.584 in(2)
    • 2.638 in(6)
    • 2.668 in(4)
    • 2.757 in(2)
    • 2.888 in(3)
    • 3.15 in(3)
    • 3.338 in(2)
    • 3.5 in(6)
    • 3.638 in(2)
    • 3.938 in(6)
    • 4.0 in(5)
    • 4.5 in(73)
    • 4.921 in(110)
    • 4.933 in(12)
    • 5.0 in(40)
    • 5.327 in(2)
    • 5.348 in(2)
    • 5.372 in(4)
    • 5.394 in(4)
    • 5.463 in(4)
    • 5.508 in(12)
    • 5.906 in(120)
    • 5.915 in(4)
    • 5.917 in(4)
    • 5.961 in(10)
    • 6.0 in(179)
    • 6.114 in(2)
    • 6.136 in(2)
    • 6.25 in(4)
    • 6.372 in(2)
    • 6.394 in(2)
    • 6.694 in(46)
    • 6.703 in(4)
    • 7.0 in(23)
    • 7.079 in(2)
    • 7.087 in(14)
    • 7.263 in(2)
    • 7.875 in(36)
    • 7.931 in(7)
    • 7.976 in(1)
    • 8.0 in(7)
    • 8.012 in(4)
    • 8.019 in(6)
    • 8.02 in(4)
    • 8.055 in(1)
    • 8.132 in(2)
    • 8.15 in(1)
    • 9.843 in(20)
    • 9.879 in(1)
    • 10.0 in(15)
    • 10.02 in(3)
    • 10.025 in(1)
    • 10.063 in(2)
    • 10.095 in(2)
    • 11.811 in(12)
    • 12.0 in(14)
    • 12.02 in(3)
    • 12.025 in(2)
    • 13.781 in(2)
    • 14.0 in(12)
    • 14.07 in(1)
    • 16.0 in(10)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 19.05 mm(2)
    • 41.276 mm(6)
    • 47.75 mm(10)
    • 49.625 mm(4)
    • 51.75 mm(8)
    • 52.75 mm(31)
    • 54.301 mm(5)
    • 54.75 mm(47)
    • 55.0 mm(1)
    • 55.676 mm(1)
    • 57.625 mm(21)
    • 57.75 mm(4)
    • 59.625 mm(4)
    • 59.75 mm(14)
    • 61.75 mm(6)
    • 63.5 mm(4)
    • 65.625 mm(2)
    • 67.0 mm(6)
    • 67.75 mm(4)
    • 70.0 mm(2)
    • 73.351 mm(3)
    • 80.0 mm(3)
    • 84.775 mm(2)
    • 88.9 mm(6)
    • 92.4 mm(2)
    • 100.0 mm(6)
    • 101.601 mm(5)
    • 114.301 mm(73)
    • 125.0 mm(110)
    • 125.301 mm(12)
    • 127.0 mm(40)
    • 135.3 mm(2)
    • 135.85 mm(2)
    • 136.451 mm(4)
    • 137.0 mm(4)
    • 138.75 mm(4)
    • 139.9 mm(12)
    • 150.0 mm(120)
    • 150.25 mm(4)
    • 150.3 mm(4)
    • 151.4 mm(10)
    • 152.4 mm(179)
    • 155.3 mm(2)
    • 155.851 mm(2)
    • 158.75 mm(4)
    • 161.851 mm(2)
    • 162.4 mm(2)
    • 170.0 mm(46)
    • 170.25 mm(4)
    • 177.8 mm(23)
    • 179.8 mm(2)
    • 180.0 mm(14)
    • 184.451 mm(2)
    • 200.0 mm(36)
    • 201.451 mm(7)
    • 202.601 mm(1)
    • 203.201 mm(7)
    • 203.5 mm(4)
    • 203.675 mm(6)
    • 203.701 mm(4)
    • 204.601 mm(1)
    • 206.55 mm(2)
    • 207.0 mm(1)
    • 250.0 mm(20)
    • 250.925 mm(1)
    • 254.0 mm(15)
    • 254.5 mm(3)
    • 254.601 mm(1)
    • 255.601 mm(2)
    • 256.401 mm(2)
    • 300.0 mm(12)
    • 304.8 mm(14)
    • 305.3 mm(3)
    • 305.401 mm(2)
    • 350.0 mm(2)
    • 355.6 mm(12)
    • 357.375 mm(1)
    • 406.401 mm(10)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.002 in(78)
    • 0.003 in(187)
    • 0.004 in(146)
    • 0.005 in(159)
    • 0.006 in(123)
    • 0.007 in(150)
    • 0.008 in(706)
    • 0.01 in(150)
    • 0.011 in(78)
    • 0.012 in(144)
    • 0.014 in(117)
    • 0.016 in(757)
    • 0.019 in(114)
    • 0.02 in(241)
    • 0.023 in(117)
    • 0.03 in(70)
    • 0.031 in(734)
    • 0.033 in(11)
    • 0.034 in(62)
    • 0.035 in(114)
    • 0.039 in(371)
    • 0.041 in(138)
    • 0.046 in(20)
    • 0.047 in(398)
    • 0.048 in(18)
    • 0.049 in(147)
    • 0.06 in(308)
    • 0.061 in(51)
    • 0.062 in(92)
    • 0.063 in(422)
    • 0.065 in(49)
    • 0.069 in(147)
    • 0.078 in(93)
    • 0.079 in(235)
    • 0.08 in(70)
    • 0.081 in(53)
    • 0.089 in(114)
    • 0.094 in(143)
    • 0.095 in(159)
    • 0.096 in(52)
    • 0.098 in(135)
    • 0.099 in(59)
    • 0.1 in(43)
    • 0.119 in(101)
    • 0.12 in(105)
    • 0.125 in(206)
    • 0.128 in(40)
    • 0.156 in(49)
    • 0.157 in(48)
    • 0.158 in(53)
    • 0.159 in(31)
    • 0.187 in(8)
    • 0.188 in(36)
    • 0.197 in(11)
    • 0.198 in(13)
    • 0.25 in(16)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.05 mm(78)
    • 0.076 mm(187)
    • 0.1 mm(146)
    • 0.125 mm(159)
    • 0.151 mm(123)
    • 0.176 mm(150)
    • 0.2 mm(706)
    • 0.225 mm(78)
    • 0.25 mm(150)
    • 0.275 mm(78)
    • 0.301 mm(144)
    • 0.325 mm(117)
    • 0.351 mm(114)
    • 0.4 mm(757)
    • 0.45 mm(114)
    • 0.476 mm(40)
    • 0.5 mm(241)
    • 0.576 mm(117)
    • 0.75 mm(70)
    • 0.775 mm(209)
    • 0.8 mm(525)
    • 0.826 mm(11)
    • 0.851 mm(62)
    • 0.9 mm(114)
    • 1.0 mm(371)
    • 1.05 mm(138)
    • 1.175 mm(20)
    • 1.201 mm(398)
    • 1.225 mm(18)
    • 1.25 mm(147)
    • 1.5 mm(298)
    • 1.526 mm(88)
    • 1.55 mm(51)
    • 1.576 mm(92)
    • 1.6 mm(422)
    • 1.651 mm(49)
    • 1.75 mm(147)
    • 1.975 mm(93)
    • 2.0 mm(235)
    • 2.025 mm(70)
    • 2.051 mm(53)
    • 2.25 mm(114)
    • 2.375 mm(143)
    • 2.401 mm(159)
    • 2.45 mm(52)
    • 2.5 mm(135)
    • 2.526 mm(59)
    • 2.551 mm(43)
    • 3.0 mm(101)
    • 3.026 mm(60)
    • 3.051 mm(45)
    • 3.176 mm(206)
    • 3.25 mm(40)
    • 3.95 mm(29)
    • 3.975 mm(20)
    • 4.0 mm(48)
    • 4.025 mm(53)
    • 4.05 mm(31)
    • 4.75 mm(8)
    • 4.775 mm(36)
    • 5.0 mm(11)
    • 5.025 mm(13)
    • 6.351 mm(16)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(1175)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(1175)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K00326 (29)
    • K1 (5)
    • K1025 (132)
    • K2885 (146)
    • K313 (947)
    • K420 (262)
    • K4H (110)
    • K6 (4)
    • K68 (341)
    • K8735 (29)
    • KB1345 (139)
    • KB1630 (359)
    • KB5625 (319)
    • KBH20 (281)
    • KC250 (233)
    • KC5010 (790)
    • KC5025 (751)
    • KC5410 (328)
    • KC5510 (20)
    • KC710 (182)
    • KC720 (216)
    • KC722 (182)
    • KC730 (414)
    • KC7310 (139)
    • KC732 (224)
    • KC8050 (152)
    • KC810 (298)
    • KC850 (353)
    • KC9025 (94)
    • KC910 (251)
    • KC9105 (62)
    • KC9110 (635)
    • KC9120 (112)
    • KC9125 (440)
    • KC9225 (152)
    • KC9315 (89)
    • KC9320 (182)
    • KC935 (328)
    • KC950 (276)
    • KCD25 (29)
    • KCK05 (37)
    • KCK15B (31)
    • KCK20 (415)
    • KCK20B (433)
    • KCM15B (59)
    • KCM25 (100)
    • KCM25B (5)
    • KCM35B (166)
    • KCP05 (93)
    • KCP10 (451)
    • KCP10B (530)
    • KCP25 (452)
    • KCP25B (582)
    • KCP25C (132)
    • KCS10 (56)
    • KCS10B (89)
    • KCU10 (1107)
    • KCU10B (1063)
    • KCU25 (1072)
    • KCU25B (496)
    • KD050 (122)
    • KD081 (107)
    • KD100 (191)
    • KD120 (200)
    • KD1405 (190)
    • KD1425 (179)
    • KMS (127)
    • KS15 (29)
    • KT125 (82)
    • KT150 (87)
    • KT175 (199)
    • KT315 (646)
    • KU10 (339)
    • KU10T (182)
    • KU25T (182)
    • KU30T (423)
    • KY3000 (114)
    • KY3500 (272)
    • KYS30 (121)
    • SP88F8 (52)
    Hand Of Tool
    Hand Of Tool
    • L (333)
    • N (14)
    • R (411)
    Wiper Insert
    Wiper Insert
    • N (1792)
    F Dimension
    F Dimension
    • 6.551 mm(2)
    • 7.0 mm(2)
    • 8.175 mm(1)
    • 8.225 mm(2)
    • 8.525 mm(4)
    • 8.875 mm(2)
    • 9.0 mm(6)
    • 9.4 mm(2)
    • 9.525 mm(6)
    • 9.75 mm(1)
    • 10.0 mm(1)
    • 10.226 mm(1)
    • 10.25 mm(1)
    • 10.3 mm(1)
    • 10.775 mm(1)
    • 10.875 mm(1)
    • 10.976 mm(2)
    • 11.0 mm(11)
    • 11.05 mm(7)
    • 11.101 mm(2)
    • 12.0 mm(1)
    • 12.101 mm(2)
    • 12.175 mm(2)
    • 12.226 mm(1)
    • 12.5 mm(1)
    • 12.576 mm(6)
    • 12.625 mm(1)
    • 12.701 mm(9)
    • 12.726 mm(3)
    • 12.75 mm(2)
    • 12.8 mm(4)
    • 12.851 mm(2)
    • 12.9 mm(2)
    • 13.0 mm(17)
    • 13.025 mm(2)
    • 13.951 mm(2)
    • 13.976 mm(4)
    • 14.0 mm(2)
    • 14.15 mm(2)
    • 14.275 mm(10)
    • 15.875 mm(6)
    • 15.925 mm(1)
    • 15.976 mm(4)
    • 16.0 mm(7)
    • 16.026 mm(1)
    • 16.1 mm(1)
    • 16.2 mm(5)
    • 16.225 mm(2)
    • 16.25 mm(2)
    • 16.875 mm(5)
    • 17.0 mm(15)
    • 17.3 mm(6)
    • 17.35 mm(2)
    • 17.475 mm(4)
    • 17.5 mm(2)
    • 18.925 mm(2)
    • 19.026 mm(1)
    • 19.05 mm(9)
    • 19.075 mm(16)
    • 19.1 mm(1)
    • 19.125 mm(18)
    • 19.225 mm(7)
    • 19.25 mm(2)
    • 19.425 mm(2)
    • 20.0 mm(4)
    • 20.05 mm(14)
    • 20.1 mm(28)
    • 20.201 mm(26)
    • 20.3 mm(2)
    • 21.125 mm(4)
    • 21.776 mm(1)
    • 21.8 mm(1)
    • 22.0 mm(14)
    • 22.225 mm(3)
    • 22.6 mm(2)
    • 25.0 mm(14)
    • 25.05 mm(12)
    • 25.1 mm(20)
    • 25.201 mm(14)
    • 25.3 mm(2)
    • 25.326 mm(2)
    • 25.35 mm(2)
    • 25.401 mm(21)
    • 25.425 mm(12)
    • 25.475 mm(21)
    • 25.5 mm(4)
    • 25.576 mm(8)
    • 25.701 mm(5)
    • 25.776 mm(1)
    • 25.8 mm(2)
    • 25.875 mm(1)
    • 25.901 mm(2)
    • 26.0 mm(2)
    • 26.225 mm(2)
    • 27.0 mm(5)
    • 27.901 mm(1)
    • 28.451 mm(1)
    • 28.576 mm(3)
    • 29.875 mm(3)
    • 30.0 mm(8)
    • 30.401 mm(1)
    • 30.8 mm(1)
    • 31.75 mm(32)
    • 31.826 mm(10)
    • 31.925 mm(4)
    • 32.0 mm(25)
    • 32.051 mm(4)
    • 32.075 mm(8)
    • 32.15 mm(2)
    • 32.176 mm(4)
    • 32.25 mm(2)
    • 32.301 mm(4)
    • 32.4 mm(2)
    • 32.525 mm(2)
    • 32.575 mm(2)
    • 32.65 mm(2)
    • 33.1 mm(1)
    • 34.875 mm(1)
    • 34.926 mm(4)
    • 35.0 mm(2)
    • 35.1 mm(1)
    • 35.4 mm(1)
    • 38.1 mm(19)
    • 38.176 mm(2)
    • 38.275 mm(2)
    • 38.401 mm(2)
    • 38.5 mm(2)
    • 38.6 mm(2)
    • 38.75 mm(2)
    • 38.901 mm(1)
    • 38.926 mm(2)
    • 39.1 mm(2)
    • 40.0 mm(4)
    • 40.176 mm(2)
    • 40.301 mm(2)
    • 40.651 mm(2)
    • 41.276 mm(5)
    • 44.45 mm(2)
    • 47.625 mm(2)
    • 50.801 mm(7)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.322 in(1)
    • 0.324 in(2)
    • 0.336 in(4)
    • 0.35 in(2)
    • 0.354 in(6)
    • 0.37 in(2)
    • 0.375 in(6)
    • 0.384 in(1)
    • 0.394 in(1)
    • 0.403 in(1)
    • 0.404 in(1)
    • 0.406 in(1)
    • 0.424 in(1)
    • 0.428 in(1)
    • 0.432 in(2)
    • 0.433 in(11)
    • 0.435 in(7)
    • 0.437 in(2)
    • 0.473 in(1)
    • 0.477 in(2)
    • 0.48 in(2)
    • 0.481 in(1)
    • 0.492 in(1)
    • 0.495 in(6)
    • 0.497 in(1)
    • 0.5 in(9)
    • 0.501 in(3)
    • 0.502 in(2)
    • 0.504 in(4)
    • 0.506 in(2)
    • 0.508 in(2)
    • 0.512 in(17)
    • 0.513 in(2)
    • 0.549 in(2)
    • 0.55 in(4)
    • 0.551 in(2)
    • 0.557 in(2)
    • 0.562 in(10)
    • 0.625 in(6)
    • 0.627 in(1)
    • 0.629 in(4)
    • 0.63 in(7)
    • 0.631 in(1)
    • 0.634 in(1)
    • 0.638 in(5)
    • 0.639 in(2)
    • 0.64 in(2)
    • 0.664 in(5)
    • 0.669 in(15)
    • 0.681 in(6)
    • 0.683 in(2)
    • 0.689 in(4)
    • 0.69 in(2)
    • 0.745 in(2)
    • 0.749 in(1)
    • 0.75 in(9)
    • 0.751 in(16)
    • 0.752 in(1)
    • 0.753 in(18)
    • 0.757 in(7)
    • 0.758 in(2)
    • 0.765 in(2)
    • 0.787 in(4)
    • 0.789 in(14)
    • 0.791 in(28)
    • 0.795 in(26)
    • 0.799 in(2)
    • 0.833 in(4)
    • 0.857 in(1)
    • 0.858 in(1)
    • 0.866 in(14)
    • 0.875 in(3)
    • 0.89 in(2)
    • 0.984 in(14)
    • 0.986 in(12)
    • 0.988 in(20)
    • 0.992 in(14)
    • 0.996 in(2)
    • 0.997 in(2)
    • 0.998 in(2)
    • 1.0 in(21)
    • 1.002 in(12)
    • 1.004 in(25)
    • 1.008 in(8)
    • 1.012 in(5)
    • 1.016 in(3)
    • 1.02 in(3)
    • 1.024 in(2)
    • 1.032 in(2)
    • 1.063 in(5)
    • 1.098 in(1)
    • 1.12 in(1)
    • 1.125 in(3)
    • 1.176 in(3)
    • 1.181 in(8)
    • 1.197 in(1)
    • 1.213 in(1)
    • 1.25 in(32)
    • 1.254 in(10)
    • 1.258 in(4)
    • 1.26 in(25)
    • 1.262 in(4)
    • 1.264 in(8)
    • 1.266 in(2)
    • 1.268 in(4)
    • 1.27 in(2)
    • 1.272 in(4)
    • 1.276 in(2)
    • 1.281 in(2)
    • 1.282 in(2)
    • 1.285 in(2)
    • 1.303 in(1)
    • 1.373 in(1)
    • 1.375 in(4)
    • 1.379 in(2)
    • 1.383 in(1)
    • 1.395 in(1)
    • 1.5 in(19)
    • 1.504 in(2)
    • 1.508 in(2)
    • 1.512 in(2)
    • 1.516 in(2)
    • 1.52 in(2)
    • 1.526 in(2)
    • 1.532 in(1)
    • 1.534 in(2)
    • 1.539 in(2)
    • 1.575 in(4)
    • 1.582 in(2)
    • 1.587 in(2)
    • 1.6 in(2)
    • 1.625 in(5)
    • 1.75 in(2)
    • 1.875 in(2)
    • 2.0 in(7)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.0 mm(88)
    • 11.175 mm(2)
    • 11.5 mm(2)
    • 15.875 mm(4)
    • 16.0 mm(12)
    • 16.776 mm(2)
    • 17.0 mm(3)
    • 17.026 mm(2)
    • 18.5 mm(2)
    • 18.55 mm(4)
    • 19.05 mm(1)
    • 20.0 mm(21)
    • 20.326 mm(1)
    • 21.0 mm(3)
    • 22.0 mm(3)
    • 22.85 mm(4)
    • 24.901 mm(6)
    • 25.0 mm(33)
    • 25.401 mm(6)
    • 26.0 mm(7)
    • 26.925 mm(1)
    • 28.576 mm(4)
    • 31.75 mm(6)
    • 32.0 mm(20)
    • 33.025 mm(5)
    • 34.0 mm(4)
    • 34.926 mm(6)
    • 36.0 mm(5)
    • 38.0 mm(1)
    • 38.1 mm(8)
    • 40.0 mm(14)
    • 41.301 mm(39)
    • 42.0 mm(5)
    • 44.0 mm(6)
    • 44.45 mm(2)
    • 45.051 mm(1)
    • 46.475 mm(1)
    • 47.6 mm(39)
    • 48.0 mm(3)
    • 50.0 mm(6)
    • 50.801 mm(4)
    • 52.0 mm(14)
    • 53.85 mm(1)
    • 54.0 mm(4)
    • 55.875 mm(3)
    • 56.625 mm(29)
    • 57.151 mm(6)
    • 57.2 mm(15)
    • 58.0 mm(4)
    • 60.0 mm(4)
    • 60.325 mm(4)
    • 63.0 mm(1)
    • 63.5 mm(22)
    • 64.0 mm(4)
    • 65.0 mm(1)
    • 68.0 mm(4)
    • 69.851 mm(4)
    • 70.0 mm(8)
    • 76.2 mm(8)
    • 80.0 mm(7)