Návrhy produktů

Product Family suggestions

úspěšně přidáno do košíku
Zobrazit košík

Oznámení

Označit vše jako přečtené
Mobile Menu

Railroad Turning

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (282)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (274)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (274)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (274)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (282)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (282)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (274)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (274)
  • M Stainless Steel (42)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (42)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (42)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (42)
  • K Cast Iron (252)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (246)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (252)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (252)
  • N Non-Ferrous Materials (25)
    • N1
      Wrought Aluminum
      (24)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (24)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (2)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (24)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (23)
    • N6
      Carbon, Graphite Composites, CFRP
      (18)
    • N7
      MMC's
      (23)
  • S High-Temp Alloys (34)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (34)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (34)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (34)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (32)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC
      (22)
    • H2
      Hardened Materials 48-55 HRC
      (21)
    • H3
      Hardened Materials 56-60 HRC
      (21)
Vybrat první volbu
  • IN (3)
Applications
Applications
  • CRT Profiling CRT Profiling (6)
  • Facing Facing (36)
  • ID Facing ID Facing (10)
  • ID Thread Turning ID Thread Turning (1)
  • Multiple Direction Cutting Multiple Direction Cutting (38)
  • Profiling Profiling (16)
  • Turning Turning (36)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (38)
  • Interrupted (12)
  • Lightly Interrupted Cut (64)
  • Smooth Cut (85)
  • Varying Depth of Cut (61)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 75.0 (6)
  • 90.0 (31)
  • 93.0 (4)
  • 95.0 (8)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (2)
  • Toolholder (37)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (122)
  • 2.0 (70)
  • 3.0 (7)
  • 4.0 (124)
  • 6.0 (73)
  • 8.0 (83)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (52)
  • 0.047 in (83)
  • 0.063 in (72)
  • 0.094 in (4)
  • 0.095 in (54)
  • 0.125 in (3)
  • 0.126 in (7)
  • 0.156 in (3)
  • 0.157 in (55)
  • 0.187 in (1)
  • 0.188 in (34)
  • 0.197 in (39)
  • 0.237 in (28)
  • 0.25 in (6)
  • 0.311 in (2)
  • 0.313 in (5)
  • 0.315 in (13)
  • 0.375 in (7)
  • 0.394 in (20)
  • 0.492 in (27)
  • 0.5 in (5)
  • 0.63 in (25)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.8 mm (52)
  • 1.201 mm (83)
  • 1.6 mm (72)
  • 2.375 mm (4)
  • 2.401 mm (54)
  • 3.176 mm (3)
  • 3.2 mm (7)
  • 3.975 mm (3)
  • 4.0 mm (55)
  • 4.75 mm (1)
  • 4.775 mm (34)
  • 5.0 mm (39)
  • 6.0 mm (28)
  • 6.351 mm (6)
  • 7.9 mm (2)
  • 7.95 mm (5)
  • 8.0 mm (13)
  • 9.525 mm (7)
  • 10.0 mm (20)
  • 12.5 mm (27)
  • 12.701 mm (5)
  • 16.0 mm (25)
Corner Radius Min komu Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (419)
Corner Chamfer Min komu Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (419)
Corner Chamfer Min komu Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (10)
  • Lightly Interrupted Cut (36)
  • Smooth Cut (57)
  • Varying Depth of Cut (33)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (19)
  • AC5 (6)
  • CG4 (5)
  • CL4 (22)
  • CM2 (4)
  • CM3 (30)
  • CM5 (16)
  • CPX (20)
  • CW2 (1)
  • GX (17)
  • K090 (12)
  • K1 (12)
  • K10M (12)
  • K10P (8)
  • K20K (12)
  • K21 (12)
  • K25P (12)
  • K313 (23)
  • K35P (4)
  • K40 (18)
  • K420 (19)
  • K68 (24)
  • KC210 (12)
  • KC250 (12)
  • KC5010 (26)
  • KC5025 (21)
  • KC5115RR (3)
  • KC5125RR (9)
  • KC5410 (18)
  • KC5510 (12)
  • KC720 (4)
  • KC725M (20)
  • KC730 (23)
  • KC7310 (12)
  • KC732 (6)
  • KC735M (21)
  • KC8050 (39)
  • KC810 (24)
  • KC850 (33)
  • KC9010 (16)
  • KC9025 (17)
  • KC910 (18)
  • KC9105 (9)
  • KC9110 (104)
  • KC9110RR (8)
  • KC9115RR (3)
  • KC9120 (15)
  • KC9125 (113)
  • KC9125RR (9)
  • KC9140 (14)
  • KC9145 (12)
  • KC9215 (12)
  • KC9225 (12)
  • KC9240 (27)
  • KC9240NEW (27)
  • KC9245 (12)
  • KC925M (3)
  • KC930M (3)
  • KC9315 (42)
  • KC9320 (15)
  • KC9325 (12)
  • KC935 (12)
  • KC950 (21)
  • KC990 (12)
  • KCD25 (3)
  • KCK05 (12)
  • KCK05B (12)
  • KCK15 (18)
  • KCK15B (27)
  • KCK20 (37)
  • KCK20B (23)
  • KCM15 (12)
  • KCM15B (8)
  • KCM25 (25)
  • KCM25B (17)
  • KCM35 (12)
  • KCM35B (12)
  • KCP10 (93)
  • KCP10B (56)
  • KCP25 (121)
  • KCP25B (69)
  • KCP25C (12)
  • KCP30 (36)
  • KCP30B (23)
  • KCP40 (14)
  • KCP40B (15)
  • KCPK05 (29)
  • KCPK30 (21)
  • KCS10 (16)
  • KCS10B (21)
  • KCU10 (27)
  • KCU25 (27)
  • KM1 (9)
  • KT175 (8)
  • KU30T (12)
  • KY1320 (8)
  • KY1540 (8)
  • KY1615 (21)
  • KY2000 (8)
  • KY3000 (12)
  • KY3400 (12)
  • KY3500 (12)
  • KY4300 (8)
  • KY4400 (8)
  • KYHK15B (8)
  • KYK25 (8)
  • KYK35 (12)
  • KYS25 (8)
  • KYS30 (8)
  • MC2 (8)
  • NL250 (15)
  • NL300 (15)
  • NL400 (12)
  • NL920 (5)
  • SP0819 (12)
  • SP3019 (12)
  • SP4019 (8)
  • SPADAP (12)
  • TN7035 (3)
  • WU20PM (2)
Hand Of Tool
Hand Of Tool
  • L (12)
  • N (11)
  • R (16)
Wiper Insert
Wiper Insert
  • N (445)
  • Y (12)
F Dimension
F Dimension
  • 10.0 mm (1)
  • 12.5 mm (1)
  • 14.0 mm (1)
  • 15.0 mm (1)
  • 16.5 mm (1)
  • 17.5 mm (1)
  • 18.5 mm (1)
  • 20.5 mm (1)
  • 25.0 mm (1)
  • 25.625 mm (1)
  • 26.0 mm (1)
  • 29.0 mm (1)
  • 30.0 mm (2)
  • 31.3 mm (1)
  • 32.0 mm (4)
  • 32.5 mm (1)
  • 35.0 mm (6)
  • 40.0 mm (2)
  • 50.0 mm (6)
  • 50.801 mm (2)
  • 57.151 mm (1)
  • 63.5 mm (2)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.394 in (1)
  • 0.492 in (1)
  • 0.551 in (1)
  • 0.591 in (1)
  • 0.65 in (1)
  • 0.69 in (1)
  • 0.728 in (1)
  • 0.807 in (1)
  • 0.984 in (1)
  • 1.01 in (1)
  • 1.024 in (1)
  • 1.143 in (1)
  • 1.181 in (2)
  • 1.232 in (1)
  • 1.26 in (4)
  • 1.28 in (1)
  • 1.379 in (6)
  • 1.575 in (2)
  • 1.969 in (6)
  • 2.0 in (2)
  • 2.25 in (1)
  • 2.5 in (2)
F Dimension Min komu F Dimension Max
Cutting Direction
Cutting Direction
  • B (8)
  • E (12)
  • S (19)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (15)
  • NEUTRAL (ZERO) (21)
frontEnd
Adapter Front-End
Adapter Front-End
  • KM MODULAR ADAPTER (2)
Clamp Style
Clamp Style
  • M (8)
  • P (11)
  • X (30)
Front End Type
Front End Type
  • KMT - KM Adapter (2)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (59)
  • L-RECTANGLE 90 (53)
  • L-RECTANGLE ON EDGE 90 (21)
  • O-OCTOGON 135 (2)
  • R-ROUND (134)
  • S-SQUARE 90 (109)
  • T-TRIANGLE 60 (80)
Cartridge Size
Cartridge Size
  • 32 (10)
Front End Style
Front End Style
  • KMT00 All KM, except 02,05,09 (2)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.63 in (2)
  • 0.946 in (3)
  • 1.252 in (1)
  • 1.26 in (1)
  • 1.299 in (1)
  • 1.5 in (1)
  • 1.581 in (2)
  • 3.071 in (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 16.0 mm (2)
  • 24.0 mm (3)
  • 31.8 mm (1)
  • 32.0 mm (1)
  • 33.0 mm (1)
  • 38.1 mm (1)
  • 40.151 mm (2)
  • 78.0 mm (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Gage Length
Gage Length
  • 1.969 in (1)
  • 2.205 in (1)
Gage Length
Gage Length
  • 50 mm (1)
  • 56 mm (1)
Front End Size
Front End Size
  • 0.124 in (1)
  • 0.155 in (1)
Front End Size Min komu Front End Size Max
Front End Size
Front End Size
  • 80.0 mm (1)
  • 100.0 mm (1)
Front End Size Min komu Front End Size Max
insertGeometry
Shape
Shape
  • C-DIAMOND/RHOMBIC 80 (51)
  • L-RECTANGLE 90 (44)
  • L-RECTANGLE ON EDGE 90 (21)
  • O-OCTOGON 135 (2)
  • R-ROUND (110)
  • S-SQUARE 90 (103)
  • T-TRIANGLE 60 (80)
Insert IC Size
Insert IC Size
  • 9.525 mm (28)
  • 10.0 mm (9)
  • 12.0 mm (3)
  • 12.701 mm (74)
  • 15.826 mm (2)
  • 15.875 mm (49)
  • 16.0 mm (10)
  • 19.05 mm (76)
  • 20.0 mm (15)
  • 25.0 mm (22)
  • 25.401 mm (32)
  • 32.0 mm (25)
Insert IC Size Min komu Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.375 in (28)
  • 0.394 in (9)
  • 0.473 in (3)
  • 0.5 in (74)
  • 0.623 in (2)
  • 0.625 in (49)
  • 0.63 in (10)
  • 0.75 in (76)
  • 0.787 in (15)
  • 0.984 in (22)
  • 1.0 in (32)
  • 1.26 in (25)
Insert IC Size Min komu Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.575 mm (2)
  • 9.525 mm (2)
  • 12.701 mm (25)
  • 12.9 mm (8)
  • 13.65 mm (1)
  • 13.726 mm (2)
  • 15.875 mm (17)
  • 16.125 mm (9)
  • 16.5 mm (22)
  • 19.0 mm (15)
  • 19.05 mm (41)
  • 19.35 mm (26)
  • 22.0 mm (35)
  • 22.901 mm (2)
  • 25.401 mm (20)
  • 25.8 mm (8)
  • 27.5 mm (19)
  • 30.0 mm (17)
  • 31.75 mm (26)
  • 33.0 mm (4)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.259 in (2)
  • 0.375 in (2)
  • 0.5 in (25)
  • 0.508 in (8)
  • 0.537 in (1)
  • 0.54 in (2)
  • 0.625 in (17)
  • 0.635 in (9)
  • 0.65 in (22)
  • 0.748 in (15)
  • 0.75 in (41)
  • 0.762 in (26)
  • 0.866 in (35)
  • 0.902 in (2)
  • 1.0 in (20)
  • 1.016 in (8)
  • 1.083 in (19)
  • 1.181 in (17)
  • 1.25 in (26)
  • 1.299 in (4)
Cutting Edge Length Min komu Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • 50 (5)
  • 52 (4)
  • 65 (2)
  • 71 (5)
  • 75 (2)
  • 76 (4)
  • 80 (5)
  • RH (41)
  • RM (104)
  • RN (55)
  • RP (46)
  • RRF (6)
  • RRH (12)
  • RRP (17)
  • RRSM (6)
  • RU (9)
  • S-WT5 (4)
  • UP (24)
  • UPG (18)
Cutting Tool Material
Cutting Tool Material
  • C A (25)
  • C N (12)
  • H T (16)
  • H W (456)
Tolerance Class
Tolerance Class
  • G (2)
  • M (331)
  • U (39)
backEnd
Connection Type
Connection Type
  • SQUARE SHANK (37)
  • TAPER SHANK (2)
System Size
System Size
  • KM80TS (2)
Back-End Diameter
Back-End Diameter
  • 80.0 mm (2)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 3.15 in (2)
Back-End Diameter Min komu Back-End Diameter Max
Shank Height
Shank Height
  • 0.787 in (3)
  • 0.984 in (8)
  • 1.25 in (1)
  • 1.26 in (6)
  • 1.5 in (3)
  • 1.575 in (13)
  • 2.0 in (2)
  • 3.0 in (1)
Shank Height Min komu Shank Height Max
Shank Height
Shank Height
  • 20.0 mm (3)
  • 25.0 mm (8)
  • 31.75 mm (1)
  • 32.0 mm (6)
  • 38.1 mm (3)
  • 40.0 mm (13)
  • 50.801 mm (2)
  • 76.2 mm (1)
Shank Height Min komu Shank Height Max
Shank Width
Shank Width
  • 0.787 in (3)
  • 0.984 in (11)
  • 1.25 in (1)
  • 1.26 in (3)
  • 1.5 in (3)
  • 1.575 in (13)
  • 2.0 in (2)
  • 2.25 in (1)
Shank Width Min komu Shank Width Max
Shank Width
Shank Width
  • 20.0 mm (3)
  • 25.0 mm (11)
  • 31.75 mm (1)
  • 32.0 mm (3)
  • 38.1 mm (3)
  • 40.0 mm (13)
  • 50.801 mm (2)
  • 57.151 mm (1)
Shank Width Min komu Shank Width Max
No filters matching ""
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.
Chystáte se vytvořit duplikát . Chcete pokračovat?
Chystáte se odstranit Chcete pokračovat?
Na co chcete přejmenovat váš ?
Zadejte platný název
Zadejte název duplikátu
Zadejte platný název
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
Zadejte platný název
Odešlete kopii

Zadejte platný e-mail
Zadejte platný název

Našli jsme následující výkresy CAD

Vyberte soubory, které hledáte, a stáhněte je všechny najednou

Nemůžete najít typ souboru, který hledáte?
Vyžádejte si výkresy »

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík
DOWNLOAD TYPE:



. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number Katalogové číslo ISO Karbid    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?