Axle and Wheel Reconditioning
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (64)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(64)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(64)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(64)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(64)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(64)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(64)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(64)
- M Stainless Steel (11)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(11)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(11)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(11)
- K Cast Iron (64)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(59)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(64)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(64)
- N Non-Ferrous Materials (1)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1)
- S High-Temp Alloys (12)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(12)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(12)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(12)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
Vybrat první volbu
- IN (3)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (18)
- Lightly Interrupted Cut (20)
- Smooth Cut (35)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (33)
- 2.0 (4)
- 4.0 (2)
- 6.0 (13)
- 8.0 (14)
komu
Corner Radius
Corner Radius
- 0.031 in(7)
- 0.047 in(10)
- 0.063 in(7)
- 0.095 in(2)
- 0.125 in(1)
- 0.237 in(4)
- 0.315 in(5)
- 0.375 in(2)
- 0.394 in(6)
- 0.492 in(9)
- 0.5 in(2)
- 0.63 in(9)
komu
Corner Radius
Corner Radius
- 0.8 mm(7)
- 1.201 mm(10)
- 1.6 mm(7)
- 2.401 mm(2)
- 3.176 mm(1)
- 6.0 mm(4)
- 8.0 mm(5)
- 9.525 mm(2)
- 10.0 mm(6)
- 12.5 mm(9)
- 12.701 mm(2)
- 16.0 mm(9)
komu
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K68 (1)
- KCK15B (2)
- KCK20 (5)
- KCP10 (10)
- KCP10B (8)
- KCP25 (18)
- KCP25B (8)
- KCP25C (8)
- KCPK05 (5)
- KCS10 (1)
Wiper Insert
Wiper Insert
- N (64)
- Y (2)
frontEnd
Insert Shape
Insert Shape
- O-OCTOGON 135 (1)
- R-ROUND (37)
- S-SQUARE 90 (15)
- T-TRIANGLE 60 (13)
insertGeometry
Shape
Shape
- O-OCTOGON 135 (1)
- R-ROUND (37)
- S-SQUARE 90 (15)
- T-TRIANGLE 60 (13)
Insert IC Size
Insert IC Size
- 9.525 mm(8)
- 12.0 mm(4)
- 12.701 mm(9)
- 15.875 mm(7)
- 16.0 mm(5)
- 19.05 mm(6)
- 20.0 mm(6)
- 25.0 mm(9)
- 25.401 mm(3)
- 32.0 mm(9)
komu
Insert IC Size
Insert IC Size
- 0.375 in(8)
- 0.473 in(4)
- 0.5 in(9)
- 0.625 in(7)
- 0.63 in(5)
- 0.75 in(6)
- 0.787 in(6)
- 0.984 in(9)
- 1.0 in(3)
- 1.26 in(9)
komu
Cutting Edge Length
Cutting Edge Length
- 6.575 mm(1)
- 9.525 mm(1)
- 12.701 mm(5)
- 15.875 mm(4)
- 16.5 mm(7)
- 19.05 mm(4)
- 22.0 mm(4)
- 25.401 mm(1)
- 27.5 mm(2)
komu
Cutting Edge Length
Cutting Edge Length
- 0.259 in(1)
- 0.375 in(1)
- 0.5 in(5)
- 0.625 in(4)
- 0.65 in(7)
- 0.75 in(4)
- 0.866 in(4)
- 1.0 in(1)
- 1.083 in(2)
komu
Chip Breaker CBMD
Chip Breaker CBMD
- RN (16)
- RP (13)
- RU (2)
- UP (7)
- UPG (24)
Tolerance Class
Tolerance Class
- G (1)
- M (63)
No filters matching ""