Spiral Circular
Face Milling
Helical Milling
Ramping: Blank
Milling - Through Coolant
Milling - Side and Face
Pocketing
Counter Boring
Inclined Square End MillDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 5673044 |
| ISO katalogové ID | C7713VR12-A2.00Z4R |
| ANSI katalogové ID | C7713VR12-A2.00Z4R |
| [D1MAX] Maximum Cutting Diameter | 50.8 mm |
| [D1MAX] Maximum Cutting Diameter | 2 in |
| [D1] Effective Cutting Diameter | 38.811 mm |
| [D1] Effective Cutting Diameter | 1.528 in |
| [D] Adapter / Shank / Bore Diameter | 19.06 mm |
| [D] Adapter / Shank / Bore Diameter | 0.75 in |
| [D6] Hub Diameter | 46.6 mm |
| [D6] Hub Diameter | 1.835 in |
| [L] Overall Length | 40 mm |
| [L] Overall Length | 1.575 in |
| [AP1MAX] 1st Maximum Cutting Depth | 6 mm |
| [AP1MAX] 1st Maximum Cutting Depth | 0.236 in |
| Number of Inserts | 4 |
Spiral CircularFace MillingHelical MillingRamping: BlankMilling - Through CoolantMilling - Side and FacePocketingCounter BoringInclined Square End MillVytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,12 | 0,16 | 0,22 | 0,08 | 0,12 | 0,16 | 0,06 | 0,09 | 0,12 | 0,05 | 0,08 | 0,10 | 0,05 | 0,07 | 0,10 | 701–X4 |
| 432–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X5 |
| 432–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X8 |
| 442–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 442–X5 |
| 442–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 442–X8 |
| 442–X4 | 0,23 | 0,41 | 0,66 | 0,17 | 0,30 | 0,47 | 0,13 | 0,22 | 0,35 | 0,11 | 0,19 | 0,31 | 0,10 | 0,18 | 0,28 | 442–X4 |
| GD–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GD–X5 |
| GD–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GD–X8 |
| T–X4 | 0,23 | 0,41 | 0,66 | 0,17 | 0,30 | 0,47 | 0,13 | 0,22 | 0,35 | 0,11 | 0,19 | 0,31 | 0,10 | 0,18 | 0,28 | T–X4 |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,13 | 0,19 | 0,25 | 0,10 | 0,14 | 0,18 | 0,07 | 0,10 | 0,14 | 0,06 | 0,09 | 0,12 | 0,06 | 0,08 | 0,11 | 701–X4 |
| 432–X5 | 0,16 | 0,49 | 0,93 | 0,12 | 0,35 | 0,66 | 0,09 | 0,26 | 0,49 | 0,08 | 0,23 | 0,43 | 0,07 | 0,21 | 0,39 | 432–X5 |
| 432–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X8 |
| 442–X5 | 0,16 | 0,49 | 0,93 | 0,12 | 0,35 | 0,66 | 0,09 | 0,26 | 0,49 | 0,08 | 0,23 | 0,43 | 0,07 | 0,21 | 0,39 | 442–X5 |
| 442–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 442–X8 |
| 442–X4 | 0,16 | 0,49 | 0,93 | 0,12 | 0,35 | 0,66 | 0,09 | 0,26 | 0,49 | 0,08 | 0,23 | 0,43 | 0,07 | 0,21 | 0,39 | 442–X4 |
| GD–X5 | 0,16 | 0,54 | 0,99 | 0,12 | 0,39 | 0,70 | 0,09 | 0,29 | 0,52 | 0,08 | 0,25 | 0,45 | 0,07 | 0,23 | 0,42 | GD–X5 |
| GD–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GD–X8 |
| T–X4 | 0,27 | 0,68 | 1,10 | 0,19 | 0,49 | 0,78 | 0,14 | 0,36 | 0,58 | 0,13 | 0,32 | 0,50 | 0,12 | 0,29 | 0,46 | T–X4 |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,17 | 0,24 | 0,33 | 0,13 | 0,18 | 0,24 | 0,09 | 0,13 | 0,18 | 0,08 | 0,12 | 0,16 | 0,08 | 0,11 | 0,14 | 701–X4 |
| 432–X5 | 0,21 | 0,64 | 1,23 | 0,15 | 0,46 | 0,87 | 0,11 | 0,34 | 0,65 | 0,10 | 0,30 | 0,56 | 0,09 | 0,27 | 0,51 | 432–X5 |
| 432–X8 | 0,21 | 0,64 | 1,23 | 0,15 | 0,46 | 0,87 | 0,11 | 0,34 | 0,65 | 0,10 | 0,30 | 0,56 | 0,09 | 0,27 | 0,51 | 432–X8 |
| 442–X5 | 0,21 | 0,64 | 1,23 | 0,15 | 0,46 | 0,87 | 0,11 | 0,34 | 0,65 | 0,10 | 0,30 | 0,56 | 0,09 | 0,27 | 0,51 | 442–X5 |
| 442–X8 | 0,21 | 0,64 | 1,23 | 0,15 | 0,46 | 0,87 | 0,11 | 0,34 | 0,65 | 0,10 | 0,30 | 0,56 | 0,09 | 0,27 | 0,51 | 442–X8 |
| 442–X4 | 0,21 | 0,64 | 1,23 | 0,15 | 0,46 | 0,87 | 0,11 | 0,34 | 0,65 | 0,10 | 0,30 | 0,56 | 0,09 | 0,27 | 0,51 | 442–X4 |
| GD–X5 | 0,21 | 0,71 | 1,31 | 0,15 | 0,51 | 0,93 | 0,11 | 0,38 | 0,68 | 0,10 | 0,33 | 0,60 | 0,09 | 0,30 | 0,54 | GD–X5 |
| GD–X8 | 0,21 | 0,71 | 1,31 | 0,15 | 0,51 | 0,93 | 0,11 | 0,38 | 0,68 | 0,10 | 0,33 | 0,60 | 0,09 | 0,30 | 0,54 | GD–X8 |
| T–X4 | 0,35 | 0,90 | 1,47 | 0,25 | 0,64 | 1,03 | 0,19 | 0,47 | 0,76 | 0,17 | 0,41 | 0,66 | 0,15 | 0,38 | 0,60 | T–X4 |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | 0,14 | 0,20 | 0,27 | 0,10 | 0,14 | 0,20 | 0,08 | 0,11 | 0,15 | 0,07 | 0,09 | 0,13 | 0,06 | 0,09 | 0,12 | 701–X4 |
| 432–X5 | 0,17 | 0,52 | 1,00 | 0,12 | 0,37 | 0,71 | 0,09 | 0,28 | 0,53 | 0,08 | 0,24 | 0,46 | 0,07 | 0,22 | 0,42 | 432–X5 |
| 432–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X8 |
| 442–X5 | 0,17 | 0,52 | 1,00 | 0,12 | 0,37 | 0,71 | 0,09 | 0,28 | 0,53 | 0,08 | 0,24 | 0,46 | 0,07 | 0,22 | 0,42 | 442–X5 |
| 442–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 442–X8 |
| 442–X4 | 0,17 | 0,52 | 1,00 | 0,12 | 0,37 | 0,71 | 0,09 | 0,28 | 0,53 | 0,08 | 0,24 | 0,46 | 0,07 | 0,22 | 0,42 | 442–X4 |
| GD–X5 | 0,17 | 0,58 | 1,06 | 0,12 | 0,41 | 0,75 | 0,09 | 0,31 | 0,56 | 0,08 | 0,27 | 0,48 | 0,07 | 0,25 | 0,44 | GD–X5 |
| GD–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GD–X8 |
| T–X4 | 0,29 | 0,73 | 1,18 | 0,21 | 0,52 | 0,84 | 0,15 | 0,39 | 0,62 | 0,13 | 0,34 | 0,54 | 0,12 | 0,31 | 0,49 | T–X4 |
| Geometrie břitových destiček | Programovaný posuv na zub (fz) jako % poměr radiální hloubky řezu (Ae) z pracovního průměru (dw) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | .005 | .008 | .011 | .003 | .006 | .008 | .002 | .004 | .006 | .002 | .004 | .005 | .002 | .004 | .005 | 701–X4 |
| 432–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X5 |
| 432–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X8 |
| 442–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 442–X5 |
| 442–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 442–X8 |
| 442–X4 | .007 | .021 | .037 | .005 | .015 | .027 | .004 | .011 | .020 | .003 | .010 | .017 | .003 | .009 | .016 | 442–X4 |
| GD–X5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GD–X5 |
| GD–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GD–X8 |
| T–X4 | .009 | .023 | .037 | .007 | .017 | .027 | .005 | .012 | .020 | .004 | .011 | .017 | .004 | .010 | .016 | T–X4 |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Geometrie břitových destiček | Programovaný posuv na zub (fz) jako % poměr radiální hloubky řezu (Ae) z pracovního průměru (dw) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | .005 | .009 | .013 | .004 | .007 | .009 | .003 | .005 | .007 | .002 | .004 | .006 | .002 | .004 | .005 | 701–X4 |
| 432–X5 | .006 | .019 | .037 | .005 | .014 | .027 | .003 | .010 | .020 | .003 | .009 | .017 | .003 | .008 | .016 | 432–X5 |
| 432–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X8 |
| 442–X5 | .006 | .019 | .037 | .005 | .014 | .027 | .003 | .010 | .020 | .003 | .009 | .017 | .003 | .008 | .016 | 442–X5 |
| 442–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 442–X8 |
| 442–X4 | .008 | .024 | .043 | .006 | .017 | .031 | .004 | .013 | .023 | .004 | .011 | .020 | .003 | .010 | .018 | 442–X4 |
| GD–X5 | .006 | .022 | .040 | .005 | .016 | .028 | .003 | .012 | .021 | .003 | .010 | .018 | .003 | .009 | .017 | GD–X5 |
| GD–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GD–X8 |
| T–X4 | .011 | .027 | .043 | .008 | .019 | .031 | .006 | .014 | .023 | .005 | .012 | .020 | .005 | .011 | .018 | T–X4 |
| Geometrie břitových destiček | Programovaný posuv na zub (fz) jako % poměr radiální hloubky řezu (Ae) z pracovního průměru (dw) | Geometrie břitových destiček | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| 701–X4 | .006 | .010 | .014 | .004 | .007 | .010 | .003 | .005 | .007 | .003 | .005 | .006 | .002 | .004 | .006 | 701–X4 |
| 432–X5 | .007 | .021 | .040 | .005 | .015 | .028 | .004 | .011 | .021 | .003 | .010 | .018 | .003 | .009 | .017 | 432–X5 |
| 432–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 432–X8 |
| 442–X5 | .007 | .021 | .040 | .005 | .015 | .028 | .004 | .011 | .021 | .003 | .010 | .018 | .003 | .009 | .017 | 442–X5 |
| 442–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 442–X8 |
| 442–X4 | .009 | .026 | .046 | .006 | .019 | .033 | .005 | .014 | .024 | .004 | .012 | .021 | .004 | .011 | .019 | 442–X4 |
| GD–X5 | .007 | .023 | .042 | .005 | .017 | .030 | .004 | .012 | .022 | .003 | .011 | .019 | .003 | .010 | .018 | GD–X5 |
| GD–X8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | GD–X8 |
| T–X4 | .011 | .029 | .046 | .008 | .020 | .033 | .006 | .015 | .024 | .005 | .013 | .021 | .005 | .012 | .019 | T–X4 |
| Geometrie břitových destiček | Programovaný posuv na zub (fz) jako % poměr radiální hloubky řezu (Ae) z pracovního průměru (dw) | Geometrie břitových destiček | ||||||||||||||
| – | 5% | 10% | 20% | 30% | 40–100% | |||||||||||
| 701–X4 | .007 | .012 | .017 | .005 | .009 | .012 | .004 | .007 | .009 | .003 | .006 | .008 | .003 | .005 | .007 | 701–X4 |
| 432–X5 | .008 | .026 | .049 | .006 | .018 | .035 | .005 | .014 | .026 | .004 | .012 | .022 | .004 | .011 | .021 | 432–X5 |
| 432–X8 | .008 | .026 | .049 | .006 | .018 | .035 | .005 | .014 | .026 | .004 | .012 | .022 | .004 | .011 | .021 | 432–X8 |
| 442–X5 | .008 | .026 | .049 | .006 | .018 | .035 | .005 | .014 | .026 | .004 | .012 | .022 | .004 | .011 | .021 | 442–X5 |
| 442–X8 | .008 | .026 | .049 | .006 | .018 | .035 | .005 | .014 | .026 | .004 | .012 | .022 | .004 | .011 | .021 | 442–X8 |
| 442–X4 | .011 | .032 | .058 | .008 | .023 | .041 | .006 | .017 | .030 | .005 | .015 | .026 | .005 | .014 | .024 | 442–X4 |
| GD–X5 | .008 | .028 | .053 | .006 | .020 | .037 | .005 | .015 | .027 | .004 | .013 | .024 | .004 | .012 | .022 | GD–X5 |
| GD–X8 | .008 | .028 | .053 | .006 | .020 | .037 | .005 | .015 | .027 | .004 | .013 | .024 | .004 | .012 | .022 | GD–X8 |
| T–X4 | .014 | .035 | .058 | .010 | .025 | .041 | .007 | .019 | .030 | .006 | .016 | .026 | .006 | .015 | .024 | T–X4 |
| Materiálová skupina | GH1 | X700 | KCM40 | SP6519 | X500 | MP91M | SC6525 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | 130 | 213 | 295 | 130 | 200 | 270 | 140 | 243 | 345 | 140 | 255 | 370 |
| 2 | – | – | – | – | – | – | – | – | – | 115 | 188 | 260 | 115 | 178 | 240 | 120 | 213 | 305 | 120 | 223 | 325 | |
| 3 | – | – | – | – | – | – | 100 | 170 | 240 | 100 | 165 | 230 | 100 | 155 | 210 | 105 | 188 | 270 | 105 | 198 | 290 | |
| 4 | – | – | – | – | – | – | 75 | 128 | 180 | 75 | 125 | 175 | 75 | 118 | 160 | 80 | 143 | 205 | 80 | 145 | 210 | |
| 5 | – | – | – | 70 | 103 | 135 | – | – | – | 70 | 105 | 140 | 70 | 100 | 130 | – | – | – | 80 | 120 | 160 | |
| 6 | – | – | – | 50 | 83 | 115 | – | – | – | 50 | 85 | 120 | 50 | 80 | 110 | – | – | – | 60 | 100 | 140 | |
| M | 1 | – | – | – | 115 | 188 | 260 | 115 | 188 | 260 | 115 | 193 | 270 | 115 | 183 | 250 | – | – | – | 120 | 205 | 290 |
| 2 | – | – | – | 105 | 168 | 230 | 100 | 165 | 230 | 105 | 170 | 235 | 100 | 160 | 220 | – | – | – | 110 | 185 | 260 | |
| 3 | – | – | – | 85 | 138 | 190 | 50 | 83 | 115 | 85 | 140 | 195 | 80 | 130 | 180 | – | – | – | 90 | 150 | 210 | |
| K | 1 | 135 | 213 | 290 | – | – | – | – | – | – | 140 | 218 | 295 | 120 | 200 | 280 | 145 | 255 | 365 | 145 | 268 | 390 |
| 2 | 120 | 183 | 245 | – | – | – | – | – | – | 110 | 175 | 240 | 105 | 155 | 205 | 115 | 200 | 285 | 115 | 210 | 305 | |
| 3 | 115 | 158 | 200 | – | – | – | – | – | – | 100 | 160 | 220 | 95 | 133 | 170 | 105 | 183 | 260 | – | – | – | |
| N | 1–2 | 400 | 1725 | 3050 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 3 | 295 | 1368 | 2440 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 23 | 38 | 52 | 23 | 38 | 52 | 23 | 39 | 55 | 23 | 36 | 48 | – | – | – | – | – | – |
| 2 | – | – | – | 22 | 34 | 46 | 22 | 34 | 46 | 22 | 35 | 48 | 21 | 33 | 44 | – | – | – | – | – | – | |
| 3 | – | – | – | 25 | 39 | 53 | 25 | 39 | 53 | 25 | 40 | 55 | 24 | 38 | 51 | – | – | – | – | – | – | |
| 4 | – | – | – | 36 | 56 | 75 | 36 | 56 | 75 | 36 | 58 | 79 | 35 | 54 | 73 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 78 | 105 | 50 | 80 | 110 |
| Materiálová skupina | GH1 | X700 | KCM40 | SP6519 | X500 | MP91M | SC6525 | |||||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | 426 | 697 | 459 | 426 | 656 | 886 | 459 | 795 | 1132 | 459 | 836 | 1214 |
| 2 | – | – | – | – | – | – | – | – | – | 377 | 615 | 394 | 377 | 582 | 787 | 394 | 697 | 1000 | 394 | 730 | 1066 | |
| 3 | – | – | – | – | – | – | 328 | 558 | 787 | 328 | 541 | 344 | 328 | 508 | 689 | 344 | 615 | 886 | 344 | 648 | 951 | |
| 4 | – | – | – | – | – | – | 246 | 418 | 590 | 246 | 410 | 262 | 246 | 385 | 525 | 262 | 467 | 672 | 262 | 476 | 689 | |
| 5 | – | – | – | 230 | 338 | 443 | – | – | – | 246 | 410 | 230 | 230 | 328 | 426 | – | – | – | 262 | 394 | 525 | |
| 6 | – | – | – | 164 | 272 | 377 | – | – | – | 230 | 344 | 164 | 164 | 262 | 361 | – | – | – | 197 | 328 | 459 | |
| M | 1 | – | – | – | 377 | 615 | 853 | 377 | 615 | 853 | 377 | 631 | 394 | 377 | 599 | 820 | – | – | – | 394 | 672 | 951 |
| 2 | – | – | – | 344 | 549 | 754 | 328 | 541 | 754 | 344 | 558 | 361 | 328 | 525 | 722 | – | – | – | 361 | 607 | 853 | |
| 3 | – | – | – | 279 | 451 | 623 | 164 | 271 | 377 | 279 | 459 | 295 | 262 | 426 | 590 | – | – | – | 295 | 492 | 689 | |
| K | 1 | 443 | 697 | 951 | – | – | – | – | – | – | 459 | 713 | 476 | 394 | 656 | 918 | 476 | 836 | 1197 | 476 | 877 | 1279 |
| 2 | 394 | 599 | 804 | – | – | – | – | – | – | 361 | 574 | 377 | 344 | 508 | 672 | 377 | 656 | 935 | 377 | 689 | 1000 | |
| 3 | 377 | 517 | 656 | – | – | – | – | – | – | 328 | 525 | 344 | 312 | 435 | 558 | 344 | 599 | 853 | – | – | – | |
| N | 1–2 | 1312 | 5658 | 10004 | – | – | – | – | – | – | – | – | 1312 | – | – | – | – | – | – | – | – | – |
| 3 | 968 | 4485 | 8003 | – | – | – | – | – | – | – | – | 968 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 75 | 123 | 171 | 75 | 123 | 171 | 75 | 128 | 79 | 75 | 116 | 157 | – | – | – | – | – | – |
| 2 | – | – | – | 72 | 112 | 151 | 72 | 112 | 151 | 72 | 115 | 75 | 69 | 107 | 144 | – | – | – | – | – | – | |
| 3 | – | – | – | 82 | 128 | 174 | 82 | 128 | 174 | 82 | 131 | 85 | 79 | 123 | 167 | – | – | – | – | – | – | |
| 4 | – | – | – | 118 | 182 | 246 | 118 | 182 | 246 | 118 | 189 | 121 | 115 | 177 | 239 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | 164 | – | – | – | 164 | 254 | 344 | 164 | 262 | 361 |
| Materiálová skupina | Lehké obrábění | Všeobecné použití | Těžké obrábění | |||
| – | (Lehká geometrie) | – | (Silná geometrie) | |||
| – | Odolnost proti opotřebení |  | Houževnatost | |||
| – | Geometrie | Sorta | Geometrie | Sorta | Geometrie | Sorta |
| P1–P2 | 442-X8 | SC6525 | 432-X5 | SC6525 | GD-X5 | KCM40 |
| P3–P4 | 432-X8 | SP6519 | 432-X5 | SP6519 | GD-X5 | KCM40 |
| P5–P6 | 432-X8 | SP6519 | T-X4 | SP6519 | T-X4 | X500 |
| M1–M2 | 442-X8 | SC6525 | 432-X5 | SC6525 | GD-X5 | KCM40 |
| M3 | 432-X8 | SP6519 | GD-X5 | KCM40 | 442-X4 | X500 |
| K1–K2 | T-X4 | MP91M | T-X4 | MP91M | T-X4 | MP91M |
| K3 | T-X4 | MP91M | T-X4 | MP91M | T-X4 | MP91M |
| N1–N2 | 701-X4 | GH1 | 701-X4 | GH1 | 701-X4 | GH1 |
| N3 | 701-X4 | GH1 | 701-X4 | GH1 | 701-X4 | GH1 |
| S1–S2 | 442-X5 | SP6519 | GD-X5 | KCM40 | 442-X4 | X500 |
| S3 | 442-X5 | SP6519 | GD-X5 | KCM40 | 442-X4 | X500 |
| S4 | 442-X5 | SP6519 | 442-X5 | X500 | 442-X4 | X500 |
| H1 | – | – | T-X4 | MP91M | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?