Drilling
Tool Dimensions: 2flute/2margin/coolant
DIN number 6535
DIN number 6537
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 4112520 |
| ISO katalogové ID | B225A13500HP |
| ANSI katalogové ID | B225A13500HP |
| Grade | KCPK15 |
| [D1] Drill Diameter M | 13.5 mm |
| [D1] Drill Diameter M | 0.5315 in |
| [L] Overall Length | 124 mm |
| [L] Overall Length | 4.8819 in |
| [L3] Flute Length | 77 mm |
| [L3] Flute Length | 3.0315 in |
| [L4] Maximum Drilling Depth | 60 mm |
| [L4] Maximum Drilling Depth | 2.3622 in |
| [L5] Drill Point Length | 2.513 mm |
| [L5] Drill Point Length | 0.0989 in |
| [LS] Shank Length | 45 mm |
| [LS] Shank Length | 1.7717 in |
| [D] Adapter / Shank / Bore Diameter | 14 mm |
| [D] Adapter / Shank / Bore Diameter | 0.5512 in |
DrillingTool Dimensions: 2flute/2margin/coolantDIN number 6535DIN number 6537Drilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Plain ≤h6Helix Angle: 30°Karbidy
KCPK15
Composition: Multilayered PVD TiN-TiAlN coated fine-grain carbide with superior surface finish.
Application: First choice for alloyed and high-alloyed steel and cast iron. A state-of-the-art surface condition enables superior chip evacuation and offers highest level of wear resistance at enhanced material removal rates.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Materiálová skupina |  |  | |||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| P | 0 | 140 | 240 | 290 | mm/ot | 0,08–0,15 | 0,09–0,18 | 0,12–0,21 | 0,14–0,29 | 0,15–0,33 | 0,17–0,37 | 0,19–0,43 | 0,22–0,49 |
| 1 | 130 | 240 | 290 | mm/ot | 0,09–0,18 | 0,11–0,21 | 0,14–0,25 | 0,16–0,34 | 0,18–0,39 | 0,20–0,43 | 0,22–0,51 | 0,26–0,58 | |
| 2 | 190 | 230 | 270 | mm/ot | 0,09–0,18 | 0,11–0,21 | 0,14–0,25 | 0,16–0,34 | 0,18–0,39 | 0,20–0,43 | 0,26–0,51 | 0,32–0,58 | |
| 3 | 130 | 160 | 190 | mm/ot | 0,10–0,18 | 0,12–0,21 | 0,14–0,26 | 0,16–0,34 | 0,19–0,39 | 0,24–0,46 | 0,27–0,51 | 0,34–0,60 | |
| 4 | 110 | 150 | 170 | mm/ot | 0,07–0,16 | 0,09–0,18 | 0,14–0,26 | 0,16–0,34 | 0,17–0,36 | 0,22–0,45 | 0,25–0,52 | 0,30–0,60 | |
| 5 | 60 | 80 | 90 | mm/ot | 0,06–0,14 | 0,08–0,16 | 0,10–0,20 | 0,14–0,25 | 0,16–0,28 | 0,18–0,32 | 0,22–0,40 | 0,26–0,48 | |
| 6 | 110 | 150 | 190 | mm/ot | 0,07–0,13 | 0,11–0,16 | 0,12–0,20 | 0,15–0,28 | 0,17–0,33 | 0,19–0,37 | 0,22–0,43 | 0,25–0,48 | |
| K | 1 | 120 | 150 | 200 | mm/ot | 0,08–0,11 | 0,14–0,20 | 0,20–0,28 | 0,25–0,35 | 0,29–0,40 | 0,32–0,43 | 0,36–0,50 | 0,40–0,55 |
| 2 | 80 | 120 | 160 | mm/ot | 0,08–0,11 | 0,13–0,17 | 0,19–0,26 | 0,23–0,30 | 0,25–0,36 | 0,30–0,40 | 0,34–0,46 | 0,37–0,50 | |
| 3 | 60 | 80 | 120 | mm/ot | 0,07–0,10 | 0,10–0,14 | 0,15–0,21 | 0,19–0,26 | 0,22–0,30 | 0,24–0,33 | 0,28–0,38 | 0,30–0,41 | |
| Materiálová skupina | | | |||||||||||
| Materiálová skupina | Řezná rychlost | Palcové | |||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| P | 0 | 460 | 790 | 950 | palce/ot. | .003–.006 | .004–.007 | .005–.008 | .006–.011 | .006–.013 | .007–.015 | .008–.017 | .009–.019 |
| 1 | 430 | 790 | 950 | palce/ot. | .004–.007 | .004–.008 | .006–.010 | .006–.013 | .007–.015 | .008–.017 | .009–.020 | .010–.023 | |
| 2 | 620 | 750 | 890 | palce/ot. | .004–.007 | .004–.008 | .006–.010 | .006–.013 | .007–.015 | .008–.017 | .010–.020 | .013–.023 | |
| 3 | 430 | 520 | 620 | palce/ot. | .004–.007 | .005–.008 | .006–.010 | .006–.013 | .008–.015 | .009–.018 | .011–.020 | .013–.024 | |
| 4 | 360 | 490 | 560 | palce/ot. | .003–.006 | .004–.007 | .006–.010 | .006–.013 | .007–.014 | .009–.018 | .010–.021 | .012–.024 | |
| 5 | 200 | 260 | 300 | palce/ot. | .002–.006 | .003–.006 | .004–.008 | .006–.010 | .006–.011 | .007–.013 | .009–.016 | .010–.019 | |
| 6 | 360 | 490 | 620 | palce/ot. | .003–.005 | .004–.006 | .005–.008 | .006–.011 | .007–.013 | .008–.015 | .009–.017 | .010–.019 | |
| K | 1 | 390 | 490 | 660 | palce/ot. | .003–.004 | .006–.008 | .008–.011 | .010–.014 | .011–.016 | .013–.017 | .014–.020 | .016–.022 |
| 2 | 260 | 390 | 520 | palce/ot. | .003–.004 | .005–.007 | .008–.010 | .009–.012 | .010–.014 | .012–.016 | .013–.018 | .015–.020 | |
| 3 | 200 | 260 | 390 | palce/ot. | .003–.004 | .004–.006 | .006–.008 | .008–.010 | .009–.012 | .009–.013 | .011–.015 | .012–.016 | |
| | ||||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Materiálová skupina | Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
| P | 0 | 140 | 240 | 290 | mm/r | 0,08–0,15 | 0,09–0,18 | 0,12–0,21 | 0,14–0,29 | 0,15–0,33 | 0,17–0,37 | 0,19–0,43 | 0,22–0,49 |
| 1 | 130 | 240 | 290 | mm/r | 0,09–0,18 | 0,11–0,21 | 0,14–0,25 | 0,16–0,34 | 0,18–0,39 | 0,20–0,43 | 0,22–0,51 | 0,26–0,58 | |
| 2 | 190 | 230 | 270 | mm/r | 0,09–0,18 | 0,11–0,21 | 0,14–0,25 | 0,16–0,34 | 0,18–0,39 | 0,20–0,43 | 0,26–0,51 | 0,32–0,58 | |
| 3 | 130 | 160 | 190 | mm/r | 0,10–0,18 | 0,12–0,21 | 0,14–0,26 | 0,16–0,34 | 0,19–0,39 | 0,24–0,46 | 0,27–0,51 | 0,34–0,60 | |
| 4 | 110 | 150 | 170 | mm/r | 0,07–0,16 | 0,09–0,18 | 0,14–0,26 | 0,16–0,34 | 0,17–0,36 | 0,22–0,45 | 0,25–0,52 | 0,30–0,60 | |
| 5 | 70 | 90 | 110 | mm/r | 0,06–0,14 | 0,08–0,16 | 0,10–0,20 | 0,14–0,25 | 0,16–0,28 | 0,18–0,32 | 0,22–0,40 | 0,26–0,48 | |
| 6 | 60 | 80 | 100 | mm/r | 0,06–0,14 | 0,08–0,16 | 0,10–0,20 | 0,14–0,25 | 0,16–0,28 | 0,18–0,32 | 0,22–0,40 | 0,26–0,48 | |
| K | 1 | 120 | 150 | 200 | mm/r | 0,08–0,11 | 0,14–0,20 | 0,20–0,28 | 0,25–0,35 | 0,29–0,40 | 0,32–0,43 | 0,36–0,50 | 0,40–0,55 |
| 2 | 80 | 120 | 160 | mm/r | 0,08–0,11 | 0,13–0,17 | 0,19–0,26 | 0,23–0,30 | 0,25–0,36 | 0,30–0,40 | 0,34–0,46 | 0,37–0,50 | |
| 3 | 60 | 80 | 120 | mm/r | 0,07–0,10 | 0,10–0,14 | 0,15–0,21 | 0,19–0,26 | 0,22–0,30 | 0,24–0,33 | 0,28–0,38 | 0,30–0,41 | |
| Tolerance • Metrické | ||
| Rozsah nominálních průměrů | Tolerance D1 m7 | Tolerance D h6 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 | |
| Tolerance • Palcové | ||
| Rozsah nominálních průměrů | Tolerance D1 m7 | Tolerance D h6 |
| .0002/.0006 | .0000/-.0003 | |
| .0002/.0008 | .0000/-.0004 | |
| .0003/.0010 | .0000/-.0004 | |
| .0003/.0011 | .0000/-.0005 | |
| mm | KRÁTKÉ* | dlouhé* | EXTRA DLOUHÉ** | |||||||||
| Ø | DIN 6535 | ~3 x D | ~5 x D | ~8 x D | ||||||||
| D1 min | D1 max | D | LS min | L | L3 | L4 | L | L3 | L4 | L | L3 | L4 |
| 1,000 | 1,400 | 4 | 28 | 58 | 7 | 5 | 58 | 9 | 6 | 58 | 12 | 10 |
| 1,401 | 1,900 | 4 | 28 | 58 | 9 | 6 | 58 | 12 | 9 | 58 | 18 | 15 |
| 1,901 | 2,300 | 4 | 28 | 58 | 13 | 9 | 58 | 18 | 14 | 66 | 26 | 22 |
| 2,301 | 2,990 | 4 | 28 | 58 | 17 | 12 | 58 | 22 | 17 | 66 | 30 | 25 |
| 3,000 | 3,750 | 6 | 36 | 62 | 20 | 14 | 66 | 28 | 23 | 78 | 40 | 33 |
| 3,751 | 4,750 | 6 | 36 | 66 | 24 | 17 | 74 | 36 | 29 | 87 | 49 | 41 |
| 4,751 | 6,000 | 6 | 36 | 66 | 28 | 20 | 82 | 44 | 35 | 94 | 56 | 48 |
| 6,001 | 7,000 | 8 | 36 | 79 | 34 | 24 | 91 | 53 | 43 | 105 | 67 | 57 |
| 7,001 | 8,000 | 8 | 36 | 79 | 41 | 29 | 91 | 53 | 43 | 110 | 72 | 61 |
| 8,001 | 10,000 | 10 | 40 | 89 | 47 | 35 | 103 | 61 | 49 | 122 | 80 | 68 |
| 10,001 | 12,000 | 12 | 45 | 102 | 55 | 40 | 118 | 71 | 56 | 141 | 94 | 79 |
| 12,001 | 14,000 | 14 | 45 | 107 | 60 | 43 | 124 | 77 | 60 | 155 | 108 | 91 |
| 14,001 | 16,000 | 16 | 48 | 115 | 65 | 45 | 133 | 83 | 63 | 171 | 121 | 101 |
| 16,001 | 18,000 | 18 | 48 | 123 | 73 | 51 | 143 | 93 | 71 | 185 | 135 | 113 |
| 18,001 | 20,000 | 20 | 50 | 131 | 79 | 55 | 153 | 101 | 77 | 200 | 148 | 124 |
| 20,001 | 22,000 | 20 | 50 | 141 | 86 | 60 | 167 | 112 | 85 | 217 | 162 | 136 |
| 22,001 | 25,000 | 25 | 56 | 153 | 95 | 65 | 184 | 126 | 98 | 238 | 180 | 150 |
| * D1 20mm podle DIN 6537K | ||||||||||||
| * D1 | ||||||||||||
| ** podle firemních norem | ||||||||||||
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?