Drilling
Drilling: Inclined Entry
Drilling: Inclined Exit
Drilling: X-Offset
Drilling: Convex
Shank - Cylindrical with Flat and Flange
Through Coolant: Radial: Indexable Drilling
Drilling: Blind
Chain Drilling
Drilling: Cross-Hole Drilling
Drilling: Half-Cylindrical Drilling
Drilling: Corner Drilling 45°Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 3022350 |
| ISO katalogové ID | DFR0844R4SSF100 |
| ANSI katalogové ID | DFR0844R4SSF100 |
| [D] Adapter / Shank / Bore Diameter | 25.4 mm |
| [D] Adapter / Shank / Bore Diameter | 1 in |
| [D1] Drill Diameter M | 21.438 mm |
| [D1] Drill Diameter M | 0.844 in |
| [D1MAX] Drill Diameter Maximum | 22.438 mm |
| [D1MAX] Drill Diameter Maximum | 0.8834 in |
| [L1] Insert Gage Length | 114.085 mm |
| [L1] Insert Gage Length | 4.4915 in |
| [L4] Maximum Drilling Depth | 85.75 mm |
| [L4] Maximum Drilling Depth | 3.376 in |
| [L5] Drill Point Length | 0.755 mm |
| [L5] Drill Point Length | 0.0297 in |
| [LS] Shank Length | 76.2 mm |
| [LS] Shank Length | 3 in |
| Gage Insert | DFR0403. |
DrillingDrilling: Inclined EntryDrilling: Inclined ExitDrilling: X-OffsetDrilling: ConvexShank - Cylindrical with Flat and FlangeThrough Coolant: Radial: Indexable DrillingDrilling: BlindChain DrillingDrilling: Cross-Hole DrillingDrilling: Half-Cylindrical DrillingDrilling: Corner Drilling 45°Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Palcové | ||||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Řezná rychlost | Doporučený posuv (fz) podle průměru | ||||||
| Rozsah řezných rychlostí | ||||||||||||
| Min | Počáteční hodnota | Max | 3,0 | 3,0 | 3,0 | |||||||
| P | 1 | 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 |
| – | 105 | 105 | ||||||||||
| 2 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 1 | 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | |
| – | 105 | 105 | ||||||||||
| 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 2 | 2 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | |
| – | 105 | 105 | ||||||||||
| 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 1 | 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | |
| – | 105 | 105 | ||||||||||
| 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 2 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 1 | 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | |
| – | 105 | 105 | ||||||||||
| 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 1 | 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | |
| – | 105 | 105 | ||||||||||
| 2 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | ||
| – | 105 | 105 | ||||||||||
| Palcové | ||||||||||||
| Řezná rychlost | ||||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (fz) podle průměru | |||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Min | Počáteční hodnota | Max | Ø | DFR02... .500"–.625" | DFR03... .688"–.750" | DFR04... .813"–1.00" | |
| P | 1 | S | O | MD | KCU25 | 1017 | 1066 | 1181 | SFM | .004–.006 | .004–.007 | .006–.010 |
| 1 | S | I | MD | KC7140 | 1017 | 1066 | 1181 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 1 | U | O | MD | KCU40 | 656 | 705 | 754 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 1 | U | I | MD | KC7140 | 656 | 705 | 754 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 1 | I | O | MD | KC7140 | 426 | 443 | 492 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 1 | I | I | MD | KC7140 | 426 | 443 | 492 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 2 | S | O | GD | KCPK10 | 1017 | 1066 | 1181 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 2 | S | I | LD | KC7140 | 1017 | 1066 | 1181 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 2 | U | O | GD | KCU40 | 656 | 705 | 754 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 2 | U | I | LD | KC7140 | 656 | 705 | 754 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 2 | I | O | MD | KC7140 | 426 | 443 | 492 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 2 | I | I | LD | KC7140 | 426 | 443 | 492 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 3 | S | O | GD | KCPK10 | 853 | 935 | 1050 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 3 | S | I | LD | KC7140 | 853 | 935 | 1050 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 3 | U | O | GD | KCU40 | 590 | 640 | 722 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 3 | U | I | LD | KC7140 | 590 | 640 | 722 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 3 | I | O | GD | KC7140 | 361 | 394 | 459 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 3 | I | I | LD | KC7140 | 361 | 394 | 459 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 4 | S | O | GD | KCU25 | 722 | 820 | 984 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 4 | S | I | LD | KC7140 | 722 | 820 | 984 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 4 | U | O | GD | KCU40 | 492 | 590 | 722 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 4 | U | I | LD | KC7140 | 492 | 590 | 722 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 4 | I | O | GD | KC7140 | 295 | 361 | 459 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 4 | I | I | LD | KC7140 | 295 | 361 | 459 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 5 | S | O | GD | KCU25 | 590 | 656 | 722 | SFM | .003–.005 | .004–.006 | .004–.007 | |
| 5 | S | I | LD | KC7140 | 590 | 656 | 722 | SFM | .003–.005 | .004–.006 | .004–.007 | |
| 5 | U | O | GD | KCU40 | 394 | 443 | 492 | SFM | .003–.005 | .004–.006 | .004–.007 | |
| 5 | U | I | LD | KC7140 | 394 | 443 | 492 | SFM | .003–.005 | .004–.006 | .004–.007 | |
| 5 | I | O | GD | KC7140 | 230 | 279 | 328 | SFM | .003–.005 | .004–.006 | .004–.007 | |
| 5 | I | I | LD | KC7140 | 230 | 279 | 328 | SFM | .003–.005 | .004–.006 | .004–.007 | |
| 6 | S | O | GD | KCU25 | 590 | 656 | 722 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 6 | S | I | LD | KC7140 | 590 | 656 | 722 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 6 | U | O | GD | KCU40 | 394 | 443 | 492 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 6 | U | I | LD | KC7140 | 394 | 443 | 492 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 6 | I | O | GD | KC7140 | 230 | 279 | 328 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| 6 | I | I | LD | KC7140 | 230 | 279 | 328 | SFM | .004–.006 | .004–.007 | .006–.010 | |
| Palcové | ||||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Řezná rychlost | Doporučený posuv (fz) podle průměru | ||||||
| Rozsah řezných rychlostí | ||||||||||||
| Min | Počáteční hodnota | Max | skupina | |||||||||
| Min | Max | 3,0 | 3,0 | 3,0 | P | 1 | ||||||
| 105 | 55 | – | ||||||||||
| 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 2 | |||
| 105 | 55 | – | ||||||||||
| 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | |||
| 105 | 55 | – | ||||||||||
| – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | ||
| 105 | 55 | – | ||||||||||
| 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | |||
| 105 | 55 | – | ||||||||||
| 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | |||
| 105 | 55 | – | ||||||||||
| – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 2 | ||
| 105 | 55 | – | ||||||||||
| 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | |||
| 105 | 55 | – | ||||||||||
| 105 | 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | |||
| 105 | 55 | – | ||||||||||
| Palcové | ||||||||||||
| Řezná rychlost | ||||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (fz) podle průměru | |||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Min | Počáteční hodnota | Max | Ø | DFR02... .500"–.625" | DFR03... .688"–.750" | DFR04... .813"–1.00" | |
| M | 1 | S | O | MD | KC7140 | 492 | 623 | 754 | SFM | .003–.005 | .003–.006 | .004–.007 |
| 1 | S | I | MD | KC7140 | 492 | 623 | 754 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 1 | U | O | MD | KC7140 | 328 | 426 | 525 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 1 | U | I | MD | KC7140 | 328 | 426 | 525 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 1 | I | O | MD | KC7140 | 197 | 262 | 328 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 1 | I | I | MD | KC7140 | 197 | 262 | 328 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 2 | S | O | MD | KC7140 | 492 | 590 | 689 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 2 | S | I | MD | KC7140 | 492 | 590 | 689 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 2 | U | O | MD | KC7140 | 328 | 426 | 525 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 2 | U | I | MD | KC7140 | 328 | 426 | 525 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 2 | I | O | MD | KC7140 | 197 | 262 | 328 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 2 | I | I | MD | KC7140 | 197 | 262 | 328 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 3 | S | O | MD | KC7140 | 328 | 426 | 525 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 3 | S | I | MD | KC7140 | 328 | 426 | 525 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 3 | U | O | MD | KC7140 | 262 | 361 | 459 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 3 | U | I | MD | KC7140 | 262 | 361 | 459 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 3 | I | O | MD | KC7140 | 164 | 230 | 295 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| 3 | I | I | MD | KC7140 | 164 | 230 | 295 | SFM | .003–.005 | .003–.006 | .004–.007 | |
| Palcové | ||||||||||||
| Materiálová skupina | Lůžko | Lůžko | Geometrie | Sorta | Řezná rychlost | Doporučený posuv (fz) podle průměru | ||||||
| Rozsah řezných rychlostí | ||||||||||||
| Min | Počáteční hodnota | Max | 1 | 1 | – | 105 | ||||||
| 105 | 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | 1 | – | 105 | |
| 105 | mm/r | 0,05 | ||||||||||
| – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 2 | 2 | – | 105 | |||
| 105 | mm/r | 0,05 | ||||||||||
| – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | 1 | – | 105 | |||
| 105 | mm/r | 0,05 | ||||||||||
| 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | 1 | – | 105 | ||
| 105 | mm/r | 0,05 | ||||||||||
| – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | 1 | – | 105 | |||
| 105 | mm/r | 0,05 | ||||||||||
| – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | 1 | – | 105 | |||
| 105 | mm/r | 0,05 | ||||||||||
| 55 | – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 2 | 2 | – | 105 | ||
| 105 | mm/r | 0,05 | ||||||||||
| – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | 1 | – | 105 | |||
| 105 | mm/r | 0,05 | ||||||||||
| – | 105 | mm/r | 0,05 | 0,05 | 0,05 | 1 | 1 | – | 105 | |||
| 105 | mm/r | 0,05 | ||||||||||
| Palcové | ||||||||||||
| Řezná rychlost | ||||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (fz) podle průměru | |||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Min | Počáteční hodnota | Max | Ø | DFR02... .500"–.625" | DFR03... .688"–.750" | DFR04... .813"–1.00" | |
| K | 1 | S | O | GD | KCPK10 | 656 | 787 | 984 | SFM | .004–.007 | .005–.008 | .006–.009 |
| 1 | S | I | LD | KCU40 | 656 | 787 | 984 | SFM | .004–.007 | .005–.008 | .006–.009 | |
| 1 | U | O | GD | KCU25 | 394 | 508 | 656 | SFM | .004–.007 | .005–.008 | .006–.009 | |
| 1 | U | I | LD | KC7140 | 394 | 508 | 656 | SFM | .004–.007 | .005–.008 | .006–.009 | |
| 1 | I | O | GD | KCU40 | 262 | 328 | 410 | SFM | .004–.007 | .005–.008 | .005–.009 | |
| 1 | I | I | LD | KC7140 | 262 | 328 | 410 | SFM | .004–.007 | .005–.008 | .005–.009 | |
| 2 | S | O | GD | KCPK10 | 590 | 722 | 853 | SFM | .004–.007 | .005–.008 | .006–.009 | |
| 2 | S | I | LD | KCU40 | 590 | 722 | 853 | SFM | .004–.007 | .005–.008 | .006–.009 | |
| 2 | U | O | GD | KCU25 | 361 | 459 | 558 | SFM | .004–.007 | .005–.008 | .005–.009 | |
| 2 | U | I | LD | KC7140 | 361 | 459 | 558 | SFM | .004–.007 | .005–.008 | .005–.009 | |
| 2 | I | O | GD | KCU40 | 262 | 328 | 394 | SFM | .004–.007 | .005–.008 | .006–.009 | |
| 2 | I | I | LD | KC7140 | 262 | 328 | 394 | SFM | .004–.007 | .005–.008 | .006–.009 | |
| 3 | S | O | GD | KCPK10 | 590 | 722 | 853 | SFM | .004–.007 | .005–.008 | .005–.009 | |
| 3 | S | I | LD | KCU40 | 590 | 722 | 853 | SFM | .004–.007 | .005–.008 | .005–.009 | |
| 3 | U | O | GD | KCU25 | 361 | 459 | 558 | SFM | .004–.007 | .005–.008 | .006–.009 | |
| 3 | U | I | LD | KC7140 | 361 | 459 | 558 | SFM | .004–.007 | .005–.008 | .006–.009 | |
| 3 | I | O | GD | KCU40 | 262 | 328 | 394 | SFM | .004–.007 | .005–.008 | .005–.009 | |
| 3 | I | I | LD | KC7140 | 262 | 328 | 394 | SFM | .004–.007 | .005–.008 | .005–.009 | |
| Palcové | ||||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Řezná rychlost | Doporučený posuv (fz) podle průměru | ||||||
| Rozsah řezných rychlostí | ||||||||||||
| Min | Počáteční hodnota | Max | – | 105 | mm/r | 0,05 | ||||||
| 0,05 | 0,05 | 2 | 2 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | |
| 1 | 1 | – | ||||||||||
| 1 | 1 | – | 105 | 105 | 55 | – | 105 | mm/r | 0,05 | |||
| 1 | 1 | – | ||||||||||
| Palcové | ||||||||||||
| Řezná rychlost | ||||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (fz) podle průměru | |||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Min | Počáteční hodnota | Max | Ø | DFR02... .500"–.625" | DFR03... .688"–.750" | DFR04... .813"–1.00" | |
| N | 1 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | SFM | .003–.004 | .004–.006 | .005–.006 |
| 1 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 1 | U | O | LD | KCU40 | 984 | 1312 | 1640 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 1 | U | I | LD | KCU40 | 984 | 1312 | 1640 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 1 | I | O | LD | KCU40 | 656 | 984 | 1312 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 1 | I | I | LD | KCU40 | 656 | 984 | 1312 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 2 | S | O | ST | KD1425 | 1230 | 1804 | 2542 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 2 | S | I | ST | KD1425 | 1230 | 1804 | 2542 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 2 | U | O | LD | KCU40 | 820 | 1148 | 1476 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 2 | U | I | LD | KCU40 | 820 | 1148 | 1476 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 2 | I | O | LD | KCU40 | 574 | 820 | 1066 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 2 | I | I | LD | KCU40 | 574 | 820 | 1066 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 3 | S | O | ST | KD1425 | 1148 | 1640 | 2132 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 3 | S | I | ST | KD1425 | 1148 | 1640 | 2132 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 3 | U | O | LD | KCU40 | 820 | 1148 | 1476 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 3 | U | I | LD | KCU40 | 820 | 1148 | 1476 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 3 | I | O | LD | KCU40 | 492 | 820 | 1148 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 3 | I | I | LD | KCU40 | 492 | 820 | 1148 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 4 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 4 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 4 | U | O | LD | KCU40 | 820 | 1148 | 1486 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 4 | U | I | LD | KCU40 | 820 | 1148 | 1486 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 4 | I | O | LD | KCU40 | 656 | 984 | 1312 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 4 | I | I | LD | KCU40 | 656 | 984 | 1312 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 5 | S | O | HP | KD1425 | 1312 | 1968 | 2624 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 5 | S | I | HP | KD1425 | 1312 | 1968 | 2624 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 5 | U | O | HP | KCU40 | 820 | 1148 | 1476 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 5 | U | I | HP | KCU40 | 820 | 1148 | 1476 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 5 | I | O | HP | KCU40 | 656 | 984 | 1312 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 5 | I | I | HP | KCU40 | 656 | 984 | 1312 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 6 | S | O | ST | KD1425 | 1312 | 1968 | 2624 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 6 | S | I | ST | KD1425 | 1312 | 1968 | 2624 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 6 | U | O | LD | KCU40 | 820 | 1148 | 1476 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 6 | U | I | LD | KCU40 | 820 | 1148 | 1476 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 6 | I | O | LD | KMF | 656 | 984 | 1312 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| 6 | I | I | LD | KMF | 656 | 984 | 1312 | SFM | .003–.004 | .004–.006 | .005–.006 | |
| Palcové | ||||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Řezná rychlost | Doporučený posuv (fz) podle průměru | ||||||
| Rozsah řezných rychlostí | ||||||||||||
| Min | Počáteční hodnota | Max | ||||||||||
| Palcové | ||||||||||||
| Řezná rychlost | ||||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (fz) podle průměru | |||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Min | Počáteční hodnota | Max | Ø | DFR02... .500"-.625" | DFR03... .688"-.750" | DFR04... .813"-1.00" | |
| S | 1 | S | O | GD | KCU40 | 197 | 230 | 246 | SFM | .002–.002 | .002–.003 | .002–.004 |
| 1 | S | I | LD | KCU40 | 197 | 230 | 246 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 1 | U | O | GD | KCU40 | 131 | 164 | 197 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 1 | U | I | LD | KC7140 | 131 | 164 | 197 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 1 | I | O | MD | KC7140 | 82 | 98 | 131 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 1 | I | I | MD | KC7140 | 82 | 98 | 131 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 2 | S | O | GD | KCU40 | 164 | 197 | 230 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 2 | S | I | LD | KCU40 | 164 | 197 | 230 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 2 | U | O | GD | KCU40 | 98 | 131 | 164 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 2 | U | I | LD | KC7140 | 98 | 131 | 164 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 2 | I | O | MD | KC7140 | 82 | 98 | 131 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 2 | I | I | MD | KC7140 | 82 | 98 | 131 | SFM | .002–.002 | .002–.003 | .002–.004 | |
| 3 | S | O | GD | KCU40 | 230 | 262 | 295 | SFM | .002–.004 | .002–.003 | .002–.004 | |
| 3 | S | I | LD | KCU40 | 230 | 262 | 295 | SFM | .002–.004 | .002–.003 | .002–.004 | |
| 3 | U | O | GD | KCU40 | 164 | 197 | 230 | SFM | .002–.003 | .002–.004 | .002–.004 | |
| 3 | U | I | LD | KC7140 | 164 | 197 | 230 | SFM | .002–.003 | .002–.004 | .002–.004 | |
| 3 | I | O | MD | KC7140 | 98 | 131 | 164 | SFM | .002–.003 | .002–.004 | .002–.004 | |
| 3 | I | I | MD | KC7140 | 98 | 131 | 164 | SFM | .002–.003 | .002–.004 | .002–.004 | |
| 4 | S | O | GD | KCU40 | 230 | 262 | 295 | SFM | .002–.003 | .002–.004 | .002–.004 | |
| 4 | S | I | LD | KCU40 | 230 | 262 | 295 | SFM | .002–.003 | .002–.004 | .002–.004 | |
| 4 | U | O | GD | KCU40 | 164 | 197 | 230 | SFM | .002–.003 | .002–.004 | .002–.004 | |
| 4 | U | I | LD | KC7140 | 164 | 197 | 230 | SFM | .002–.003 | .002–.004 | .002–.004 | |
| 4 | I | O | MD | KC7140 | 98 | 131 | 164 | SFM | .002–.003 | .002–.004 | .002–.004 | |
| 4 | I | I | MD | KC7140 | 98 | 131 | 164 | SFM | .002–.003 | .002–.004 | .002–.004 | |
| Metrické | ||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Řezná rychlost | Doporučený posuv (fz) podle průměru | ||||
| Rozsah | ||||||||||
| Min | Počáteční hodnota | Max | Ø | DFR04 20,50–24,00 mm | ||||||
| N | 1 | S | O | ST | KD1425 | 396 | 720 | 841 | mm/ot. | 0,06–0,08 |
| I | ST | KD1425 | ||||||||
| 2 | S | O | ST | KD1425 | 369 | 670 | 782 | mm/ot. | 0,12–0,18 | |
| I | ST | KD1425 | ||||||||
| 3 | S | O | ST | KD1425 | 341 | 619 | 723 | mm/ot. | 0,12–0,18 | |
| I | ST | KD1425 | ||||||||
| 4 | S | O | ST | KD1425 | 475 | 720 | 841 | mm/ot. | 0,12–0,18 | |
| I | ST | KD1425 | ||||||||
| 5 | S | O | ST | KD1425 | 480 | 720 | 864 | mm/ot. | 0,06–0,08 | |
| I | ST | KD1425 | ||||||||
| Palcové | ||||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Řezná rychlost | Doporučený posuv (fz) podle průměru | ||||
| Rozsah řezných rychlostí | ||||||||||
| Min | Počáteční hodnota | Max | Ø | DFR04 .813"–1.00" | ||||||
| N | 1 | S | O | ST | KD1425 | 1300 | 2362 | 2760 | palce/ot. | .002–.003 |
| I | ST | KD1425 | ||||||||
| 2 | S | O | ST | KD1425 | 1209 | 2197 | 2567 | palce/ot. | .005–.007 | |
| I | ST | KD1425 | ||||||||
| 3 | S | O | ST | KD1425 | 1118 | 2032 | 2374 | palce/ot. | .005–.007 | |
| I | ST | KD1425 | ||||||||
| 4 | S | O | ST | KD1425 | 1560 | 2362 | 2760 | palce/ot. | .005–.007 | |
| I | ST | KD1425 | ||||||||
| 5 | S | O | ST | KD1425 | 1575 | 2362 | 2834 | palce/ot. | .002–.003 | |
| I | ST | KD1425 | ||||||||
| Metrické | ||||||||||
| Řezná rychlost | ||||||||||
| Rozsah | Doporučený posuv (fz) podle průměru | |||||||||
| Materiálová skupina | Podmínky | Lůžko | Geometrie | Sorta | Min | Počáteční hodnota | Max | Ø | DFR04 20,50–24,00 mm | |
| N | 1 | S | O | ST | KD1425 | 396 | 720 | 841 | mm/r | 0,06–0,08 |
| 1 | S | I | ST | KD1425 | 396 | 720 | 841 | mm/r | 0,06–0,08 | |
| 2 | S | O | ST | KD1425 | 369 | 670 | 782 | mm/r | 0,12–0,18 | |
| 2 | S | I | ST | KD1425 | 369 | 670 | 782 | mm/r | 0,12–0,18 | |
| 3 | S | O | ST | KD1425 | 341 | 619 | 723 | mm/r | 0,12–0,18 | |
| 3 | S | I | ST | KD1425 | 341 | 619 | 723 | mm/r | 0,12–0,18 | |
| 4 | S | O | ST | KD1425 | 475 | 720 | 841 | mm/r | 0,12–0,18 | |
| 4 | S | I | ST | KD1425 | 475 | 720 | 841 | mm/r | 0,12–0,18 | |
| 5 | S | O | ST | KD1425 | 480 | 720 | 864 | mm/r | 0,06–0,08 | |
| 5 | S | I | ST | KD1425 | 480 | 720 | 864 | mm/r | 0,06–0,08 | |
| UPOZORNĚNÍ Při vrtání průchozích otvorů se při výstupu vrtáku z obrobku tvoří kruhový disk. Pokud je nástroj stacionární a obrobek rotuje vzniká vlivem odstředivých sil riziko poranění obsluhy. Zajistěte dostatečné zakrytování stroje z důvodu ochrany všech osob. |
| D | LS |
| 20 | 50 |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?