Drilling: Stacked Plates
Drilling
Drilling: Inclined Exit
Tool Dimensions: 2flute/4margin/coolant
DIN number 6535
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
Drilling: Cross-Hole DrillingDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 3891736 |
| ISO katalogové ID | B271Z15000HPS |
| ANSI katalogové ID | B271Z15000HPS |
| Grade | KN25 |
| [D1] Drill Diameter M | 15 mm |
| [D1] Drill Diameter M | 0.5906 in |
| [L] Overall Length | 314 mm |
| [L] Overall Length | 12.3622 in |
| [L3] Flute Length | 257 mm |
| [L3] Flute Length | 10.1181 in |
| [L4] Maximum Drilling Depth | 225 mm |
| [L4] Maximum Drilling Depth | 8.8583 in |
| [L5] Drill Point Length | 2.77 mm |
| [L5] Drill Point Length | 0.1091 in |
| [LS] Shank Length | 54 mm |
| [LS] Shank Length | 2.126 in |
| [D] Adapter / Shank / Bore Diameter | 15 mm |
| [D] Adapter / Shank / Bore Diameter | 0.5906 in |
Drilling: Stacked PlatesDrillingDrilling: Inclined ExitTool Dimensions: 2flute/4margin/coolantDIN number 6535Drilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Plain ≤h6Helix Angle: 30°Drilling: Cross-Hole DrillingKarbidy
KN25
Composition: Uncoated, highly wear-resistant ultra-fine-grain carbide.
Application: Highly polished chip flute surfaces ensure superior chip evacuation and reduce tendency for built-up edges. First choice for deep-hole drilling of non-ferrous materials.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Materiálová skupina |  |  | |||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | |||
| N | 1 | 120 | 200 | 300 | mm/ot | 0,12–0,17 | 0,13–0,18 | 0,15–0,24 | 0,19–0,29 | 0,26–0,35 | 0,31–0,40 | 0,35–0,45 | 0,41–0,51 |
| 2 | 120 | 170 | 300 | mm/ot | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 3 | 100 | 150 | 300 | mm/ot | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 4 | 80 | 200 | 300 | mm/ot | 0,03–0,05 | 0,03–0,06 | 0,03–0,06 | 0,04–0,06 | 0,05–0,07 | 0,05–0,08 | 0,05–0,08 | 0,06–0,09 | |
| Materiálová skupina | | | |||||||||||
| Materiálová skupina | Řezná rychlost | Palcové | |||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 0.551 | 5/8 .625 | |||
| N | 1 | 390 | 660 | 980 | IPR | .005–.007 | .005–.007 | .006–.009 | .008–.011 | .010–.014 | .012–.016 | .014–.018 | .016–.020 |
| 2 | 390 | 560 | 980 | IPR | .005–.007 | .006–.008 | .006–.010 | .008–.012 | .011–.015 | .013–.017 | .015–.019 | .017–.021 | |
| 3 | 330 | 490 | 980 | IPR | .005–.007 | .006–.008 | .006–.010 | .008–.012 | .011–.015 | .013–.017 | .015–.019 | .017–.021 | |
| 4 | 260 | 660 | 980 | IPR | .001–.002 | .001–.002 | .001–.002 | .002–.002 | .002–.003 | .002–.003 | .002–.003 | .002–.004 | |
| | ||||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Materiálová skupina | Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | ||
| N | 1 | 120 | 200 | 300 | mm/ot | 0,12–0,17 | 0,13–0,18 | 0,15–0,24 | 0,19–0,29 | 0,26–0,35 | 0,31–0,40 | 0,35–0,45 | 0,41–0,51 |
| 2 | 120 | 170 | 300 | mm/ot | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 3 | 100 | 150 | 300 | mm/ot | 0,13–0,18 | 0,14–0,19 | 0,16–0,25 | 0,20–0,30 | 0,28–0,37 | 0,33–0,42 | 0,38–0,48 | 0,44–0,54 | |
| 4 | 80 | 200 | 300 | mm/ot | 0,03–0,05 | 0,03–0,06 | 0,03–0,06 | 0,04–0,06 | 0,05–0,07 | 0,05–0,08 | 0,05–0,08 | 0,06–0,09 | |
| Tolerance • Palcové | ||||
| Rozsah nominálních průměrů | Tolerance D1 m7 | |||
| .0394–.1181 | .0000/-.0004 | .0000/-.0006 | ||
| .0002/.0006 | .0000/-.0003 | |||
| .0002/.0008 | .0000/-.0004 | |||
| .0003/.0010 | .0000/-.0004 | |||
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?