Drilling: Stacked Plates
Drilling
Tool Dimensions: 2flute/2margin/coolant
DIN number 6535
DIN number 6537
Drilling - Through Coolant
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
Shank - Cylindrical Plain ≤h6
Helix Angle: 30°
DIN Numbers: ER ColletDownloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 5434789 |
| ISO katalogové ID | B285A08400HPS |
| ANSI katalogové ID | B285A08400HPS |
| Grade | KN15 |
| [D1] Drill Diameter M | 8.4 mm |
| [D1] Drill Diameter M | 0.3307 in |
| [L] Overall Length | 103 mm |
| [L] Overall Length | 4.0551 in |
| [L3] Flute Length | 61 mm |
| [L3] Flute Length | 2.4016 in |
| [L4] Maximum Drilling Depth | 49 mm |
| [L4] Maximum Drilling Depth | 1.9291 in |
| [L5] Drill Point Length | 1.55 mm |
| [L5] Drill Point Length | 0.061 in |
| [LS] Shank Length | 40 mm |
| [LS] Shank Length | 1.5748 in |
| [D] Adapter / Shank / Bore Diameter | 10 mm |
| [D] Adapter / Shank / Bore Diameter | 0.3937 in |
Drilling: Stacked PlatesDrillingTool Dimensions: 2flute/2margin/coolantDIN number 6535DIN number 6537Drilling - Through CoolantThrough Coolant: MQL (Minimum Quantity Lubricant): DrillingShank - Cylindrical Plain ≤h6Helix Angle: 30°DIN Numbers: ER ColletKarbidy
KN15
Composition: Uncoated, highly wear-resistant fine-grain carbide.
Application: Highly polished chip flute surfaces ensure superior chip evacuation and reduce tendency for built-up edges. First choice for non-ferrous materials.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Materiálová skupina |  |  |  | ||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
| N | 1 | 120 | 230 | 450 | mm/ot | 0,13–0,25 | 0,14–0,29 | 0,17–0,35 | 0,21–0,42 | 0,27–0,50 | 0,33–0,57 | 0,37–0,69 | 0,43–0,82 |
| 2 | 120 | 220 | 350 | mm/ot | 0,14–0,23 | 0,15–0,28 | 0,17–0,34 | 0,22–0,39 | 0,29–0,46 | 0,34–0,54 | 0,39–0,67 | 0,45–0,80 | |
| 3 | 100 | 180 | 400 | mm/ot | 0,13–0,20 | 0,14–0,21 | 0,16–0,27 | 0,20–0,33 | 0,28–0,40 | 0,33–0,45 | 0,38–0,60 | 0,44–0,68 | |
| 4 | 100 | 130 | 300 | mm/ot | 0,10–0,18 | 0,12–0,20 | 0,14–0,26 | 0,16–0,30 | 0,18–0,34 | 0,20–0,38 | 0,24–0,42 | 0,28–0,46 | |
| Materiálová skupina | | | | ||||||||||
| Materiálová skupina | Řezná rychlost | Palcové | |||||||||||
| Rozsah řezných rychlostí | Doporučený posuv (f) podle průměru | ||||||||||||
| Min | Počáteční hodnota | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
| N | 1 | 390 | 750 | 1480 | IPR | .005–.010 | .006–.011 | .007–.014 | .008–.017 | .011–.020 | .013–.022 | .015–.027 | .017–.032 |
| 2 | 390 | 720 | 1150 | IPR | .006–.009 | .006–.011 | .007–.013 | .009–.015 | .011–.018 | .013–.021 | .015–.026 | .018–.032 | |
| 3 | 330 | 590 | 1310 | IPR | .005–.008 | .006–.008 | .006–.011 | .008–.013 | .011–.016 | .013–.018 | .015–.024 | .017–.027 | |
| 4 | 330 | 430 | 980 | IPR | .004–.007 | .005–.008 | .006–.010 | .006–.012 | .007–.013 | .008–.015 | .009–.017 | .011–.018 | |
| | | |||||||||||
| Řezná rychlost | Metrické | ||||||||||||
| Rozsah | Doporučený posuv (f) podle průměru | ||||||||||||
| Materiálová skupina | Min | Počáteční hodnota | Max | 3.0 | 4.0 | 6.0 | 8.0 | 10.0 | 12.0 | 16.0 | 20.0 | ||
| N | 1 | 120 | 230 | 450 | mm/giro | 0.13 | 0.14 | 0.17 | 0.21 | 0.27 | 0.33 | 0.37 | 0.43 |
| 2 | 120 | 220 | 350 | mm/giro | 0.14 | 0.15 | 0.17 | 0.22 | 0.29 | 0.34 | 0.39 | 0.45 | |
| 3 | 100 | 180 | 400 | mm/giro | 0.13 | 0.14 | 0.16 | 0.20 | 0.28 | 0.33 | 0.38 | 0.44 | |
| 4 | 100 | 130 | 300 | mm/giro | 0.10 | 0.12 | 0.14 | 0.16 | 0.18 | 0.20 | 0.24 | 0.28 | |
| Tolerance • Metrické | ||
| Rozsah nominálních průměrů | Tolerance D1 m7 | Tolerance D h6 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 | |
| Tolerance • Palcové | ||
| Rozsah nominálních průměrů | Tolerance D1 m7 | Tolerance D h6 |
| .0002/.0006 | .0000/-.0003 | |
| .0002/.0008 | .0000/-.0004 | |
| .0003/.0010 | .0000/-.0004 | |
| .0003/.0011 | .0000/-.0005 | |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?