LT-ER/L-60

Grades

• 
  KC5010

  Composition: An advanced PVD AlTiN coating over a very deformation-resistant unalloyed carbide substrate. The new and improved coating enables speeds to be increased by 50–100%.
  Application: The KC5010 grade is ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials, and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

  P Steel

  M Stainless Steel

  K Cast Iron

  S High-Temp Alloys
• 
  KC5025

  Composition: An advanced PVD-AlTiN-coated grade with a tough, ultra-fine-grain unalloyed substrate.
  Application: For general-purpose machining of most steels, stainless steels, high-temp alloys, titanium, irons, and non-ferrous materials. Speeds may vary from low to medium and will handle interruptions and high feed rates.

  P Steel

  M Stainless Steel

  K Cast Iron

  S High-Temp Alloys
• 
  KC720

  • TiN-PVD-coated carbide.
  • Particularly high-impact strength grade.
  • For all steels, stainless steels, super-alloys, and titanium.
  • First choice for difficult conditions such as interrupted cutting, unstable clamping, etc.

  P Steel

  M Stainless Steel

  K Cast Iron

  N Non-Ferrous

  S High-Temp Alloys

  H Hardened Materials
• KC730

  KC730

  P Steel

  M Stainless Steel

  K Cast Iron

  N Non-Ferrous

  S High-Temp Alloys

  H Hardened Materials