Produkt podobný k:
Mill 1-7™ • Carbide Insert • EDPT-GE • Light Machining
Shoulder milling insert with two cutting edges per insert
Objednací číslo5169175
ISO katalogové IDEDPT070308PDSRGEANSI katalogové IDEP0708SGE
- P Steel
- M Stainless Steel
- K Cast Iron
- S High-Temp Alloys
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
Objednací číslo | 5169175 |
ISO katalogové ID | EDPT070308PDSRGE |
ANSI katalogové ID | EP0708SGE |
Grade | KCPK30 |
[LI] Insert Length | 8.19 mm |
[LI] Insert Length | 0.322 in |
[S] Insert Thickness | 2.8 mm |
[S] Insert Thickness | 0.1102 in |
[W] Insert Width | 4.69 mm |
[W] Insert Width | 0.185 in |
[BS] Corner Facet Length | 1.7 mm |
[BS] Corner Facet Length | 0.067 in |
[Rε] Corner Radius | 0.8 mm |
[Rε] Corner Radius | 0.031 in |
Average Chip Thickness [HM] | 0.085 mm |
Average Chip Thickness [HM] | 0.0033 in |
Cutting Edges per Insert | 2 |
Materiály obrobků
- Steel
- Stainless Steel
- Cast Iron
- High-Temp Alloys
Karbidy
KCPK30
Coated carbide grade with CVD multilayer (TiN/TiCN/Al2O3) and advanced Beyond™ post-coat treatment. Substrate is very tough. KCPK30 has a wide application area in general and roughing milling of steels and cast irons. Performs best dry, but can also be used wet.
Vlastnosti a výhody
- Pressed-to-size, for lowest cost per cutting edge..
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
Výběr břitové destičky
Výběr břitové destičky
Materiálová skupina | Lehké obrábění | Všeobecné použití | Těžké obrábění | |||
– | (Lehká geometrie) | – | (Silná geometrie) | |||
– | Odolnost proti opotřebení | Houževnatost | ||||
– | Geometrie | Sorta | Geometrie | Sorta | Geometrie | Sorta |
P1–P2 | .S..GE | KC725M | .S..GE | KCPK30 | .S..GE | KCPM40 |
P3–P4 | .S..GE | KC725M | .S..GE | KCPK30 | .S..GE | KCPM40 |
P5–P6 | .S..GE | KC725M | .S..GE | KCPK30 | .S..GE | KCPM40 |
M1–M2 | .S..GE | KC522M | .S..GE | KC725M | .S..GE | KCPM40 |
M3 | .S..GE | KC725M | .S..GE | KCPK30 | .S..GE | KCPM40 |
K1–K2 | .S..GE | KCPK30 | .S..GE | KCPK30 | .S..GE | KCPK30 |
K3 | .S..GE | KCPK30 | .S..GE | KCPK30 | .S..GE | KCPK30 |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | .S..GE | KC522M | .S..GE | KC725M | .S..GE | KC725M |
S3 | .S..GE | KC725M | .S..GE | KC725M | .S..GE | KCPM40 |
S4 | .S..GE | KC522M | .S..GE | KC725M | .S..GE | KC725M |
H1 | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data