Downloaded file will be available after import in the {{cadTool}} tool library.
| Objednací číslo | 5172840 |
| ISO katalogové ID | RPPT43EGE |
| ANSI katalogové ID | RPPT43EGE |
| Grade | KCPK30 |
| [D] Insert IC Size | 12.7 mm |
| [D] Insert IC Size | 0.5 in |
| [S] Insert Thickness | 4.76 mm |
| [S] Insert Thickness | 0.188 in |
| Average Chip Thickness [HM] | 0.064 mm |
| Average Chip Thickness [HM] | 0.0025 in |
| Insert Number of Indexes | 6 |
Karbidy
KCPK30
Coated carbide grade with CVD multilayer (TiN/TiCN/Al2O3) and advanced Beyond™ post-coat treatment. Substrate is very tough. KCPK30 has a wide application area in general and roughing milling of steels and cast irons. Performs best dry, but can also be used wet.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .003 | .005 | .007 | .003 | .004 | .005 | .002 | .003 | .005 | .002 | .003 | .004 | .002 | .003 | .004 | .E..LEJ |
| .E..GE | .006 | .010 | .015 | .004 | .008 | .011 | .004 | .007 | .010 | .004 | .006 | .009 | .004 | .006 | .009 | .E..GE |
| .S..GEJ | .007 | .017 | .023 | .005 | .013 | .017 | .004 | .011 | .015 | .004 | .010 | .014 | .004 | .010 | .014 | .S..GEJ |
| .S..GE | .007 | .017 | .023 | .005 | .013 | .017 | .004 | .011 | .015 | .004 | .010 | .014 | .004 | .010 | .014 | .S..GE |
| Lehké obrábění | Všeobecné použití | Těžké obrábění |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .004 | .006 | .008 | .003 | .004 | .006 | .003 | .004 | .005 | .002 | .003 | .005 | .002 | .003 | .005 | .E..LEJ |
| .E..GE | .007 | .012 | .017 | .005 | .009 | .013 | .004 | .008 | .011 | .004 | .007 | .010 | .004 | .007 | .010 | .E..GE |
| .S..GEJ | .008 | .020 | .027 | .006 | .015 | .020 | .005 | .013 | .017 | .005 | .012 | .016 | .005 | .012 | .016 | .S..GEJ |
| .S..GE | .008 | .020 | .027 | .006 | .015 | .020 | .005 | .013 | .017 | .005 | .012 | .016 | .005 | .012 | .016 | .S..GE |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .007 | .010 | .015 | .005 | .007 | .011 | .005 | .006 | .009 | .004 | .006 | .009 | .004 | .006 | .009 | .E..LEJ |
| .E..GE | .012 | .021 | .031 | .009 | .016 | .023 | .008 | .014 | .020 | .007 | .013 | .018 | .007 | .012 | .018 | .E..GE |
| .S..GEJ | .014 | .036 | .049 | .010 | .026 | .035 | .009 | .023 | .031 | .008 | .021 | .028 | .008 | .021 | .028 | .S..GEJ |
| .S..GE | .014 | .036 | .049 | .010 | .026 | .035 | .009 | .023 | .031 | .008 | .021 | .028 | .008 | .021 | .028 | .S..GE |
| Geometrie břitových destiček | Doporučené počáteční posuvy na zub (Fz) podle % poměru radiální hloubky řezu (ae) | Geometrie břitových destiček | ||||||||||||||
| 10% | 20% | 30% | 40% | 50–100% | ||||||||||||
| .E..LEJ | .005 | .007 | .011 | .004 | .005 | .008 | .003 | .005 | .007 | .003 | .004 | .006 | .003 | .004 | .006 | .E..LEJ |
| .E..GE | .009 | .015 | .023 | .007 | .011 | .017 | .006 | .010 | .014 | .005 | .009 | .014 | .005 | .009 | .013 | .E..GE |
| .S..GEJ | .010 | .026 | .035 | .008 | .019 | .026 | .007 | .017 | .022 | .006 | .015 | .021 | .006 | .015 | .020 | .S..GEJ |
| .S..GE | .010 | .026 | .035 | .008 | .019 | .026 | .007 | .017 | .022 | .006 | .015 | .021 | .006 | .015 | .020 | .S..GE |
| Materiálová skupina | KC422M | KC522M | KC725M | KCPK30 | |||||||||
| P | 1 | – | – | – | 1300 | 1130 | 1060 | 1030 | 900 | 840 | 1780 | 1560 | 1450 |
| 2 | – | – | – | 1080 | 950 | 790 | 860 | 760 | 640 | 1100 | 1000 | 900 | |
| 3 | – | – | – | 1000 | 840 | 700 | 790 | 670 | 550 | 1000 | 900 | 820 | |
| 4 | – | – | – | 890 | 730 | 590 | 710 | 590 | 470 | 740 | 690 | 620 | |
| 5 | – | – | – | 730 | 660 | 590 | 590 | 530 | 470 | 1020 | 910 | 830 | |
| 6 | – | – | – | 650 | 490 | 400 | 520 | 400 | 310 | 620 | 540 | – | |
| M | 1 | – | – | – | 800 | 710 | 650 | 670 | 590 | 540 | 820 | 720 | 620 |
| 2 | – | – | – | 730 | 620 | 520 | 610 | 520 | 430 | 730 | 640 | 550 | |
| 3 | – | – | – | 550 | 480 | 370 | 460 | 400 | 310 | 570 | 520 | 460 | |
| K | 1 | – | – | – | 900 | 820 | 720 | – | – | – | 1160 | 1050 | 940 |
| 2 | – | – | – | 710 | 640 | 590 | – | – | – | 920 | 830 | 760 | |
| 3 | – | – | – | 590 | 530 | 480 | – | – | – | 770 | 690 | 640 | |
| N | 1–2 | 4220 | 3720 | 3440 | – | – | – | – | – | – | – | – | – |
| 3 | 3720 | 3440 | 3000 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – |
| 2 | – | – | – | 160 | 140 | 110 | 140 | 120 | 100 | – | – | – | |
| 3 | – | – | – | 200 | 160 | 110 | 180 | 140 | 100 | – | – | – | |
| 4 | – | – | – | 280 | 200 | 140 | 240 | 180 | 120 | – | – | – | |
| H | 1 | – | – | – | 470 | 360 | 280 | – | – | – | – | – | – |
| Katalogové číslo | Minimální průměr otvoru (DH min) | Maximální průměr otvoru při plochém dně (DH1 max) | |||||||
| BMD125R1203M16L150 | 5,7° | 0,061 | 1,719 | 2,028 | 2,5 | 0,061 | 1,719 | 2,028 | 2,5 |
| BMD150R1204M16L150 | 9,2° | 0,130 | 2,112 | 2,528 | 3,0 | 0,130 | 2,112 | 2,528 | 3,0 |
| BMD125R1203W125L200 | 5,7° | 0,061 | 1,719 | 2,028 | 2,5 | 0,061 | 1,719 | 2,028 | 2,5 |
| BMD150R1204W150L200 | 9,2° | 0,130 | 2,112 | 2,528 | 3,0 | 0,130 | 2,112 | 2,528 | 3,0 |
| BMD125R1203C125L700 | 5,7° | 0,061 | 1,719 | 2,028 | 2,5 | 0,061 | 1,719 | 2,028 | 2,5 |
| BMD150R1203C125L800 | 9,8° | 0,138 | 2,104 | 2,528 | 3,0 | 0,138 | 2,104 | 2,528 | 3,0 |
| BMD150R1204S050L158 | 9,2° | 0,130 | 2,112 | 2,528 | 3,0 | 0,130 | 2,112 | 2,528 | 3,0 |
| BMD200R1203S075L200 | 10,5° | 0,236 | 3,058 | 3,528 | 4,0 | 0,236 | 3,058 | 3,528 | 4,0 |
| BMD200R1205S075L200 | 7,7° | 0,173 | 3,074 | 3,528 | 4,0 | 0,173 | 3,074 | 3,528 | 4,0 |
| BMD250R1207S100L200 | 4,1° | 0,130 | 4,114 | 4,528 | 5,0 | 0,130 | 4,114 | 4,528 | 5,0 |
| BMD300R1206S100L200 | 5,7° | 0,228 | 5,048 | 5,528 | 6,0 | 0,228 | 5,048 | 5,528 | 6,0 |
| BMD300R1208S100L200 | 3,5° | 0,138 | 5,078 | 5,528 | 6,0 | 0,138 | 5,078 | 5,528 | 6,0 |
| BMD400R1207S125L200 | 3,3° | 0,189 | 7,068 | 7,528 | 8,0 | 0,189 | 7,068 | 7,528 | 8,0 |
| BMD400R1209S125L200 | 3.0° | 0,173 | 7,525 | 7,528 | 8,0 | 0,173 | 7,525 | 7,528 | 8,0 |
| BMD300R1206S100L200 | 5,7° | 0,228 | 5,048 | 5,528 | 6,0 | 0,228 | 5,048 | 5,528 | 6,0 |
| BMD300R1208S100L200 | 3,5° | 0,138 | 5,078 | 5,528 | 6,0 | 0,138 | 5,078 | 5,528 | 6,0 |
| BMD400R1207S125L200 | 3,3° | 0,189 | 7,068 | 7,528 | 8,0 | 0,189 | 7,068 | 7,528 | 8,0 |
| BMD400R1209S125L200 | 3.0° | 0,173 | 7,525 | 7,528 | 8,0 | 0,173 | 7,525 | 7,528 | 8,0 |
| Materiálová skupina | Lehké obrábění | Všeobecné použití | Těžké obrábění | |||
| – | (Lehká geometrie) | – | (Silná geometrie) | |||
| – | Odolnost proti opotřebení |  | Houževnatost | |||
| – | Geometrie | Sorta | Geometrie | Sorta | Geometrie | Sorta |
| P1–P2 | .E..LEJ | KC725M | .E..GE | KC725M | .S..GE | KCPK30 |
| P3–P4 | .E..LEJ | KC725M | .S..GE | KCPK30 | – | – |
| P5–P6 | .E..GE | KCPK30 | .S..GE | KCPK30 | – | – |
| M1–M2 | .E..LEJ | KC725M | .E..LEJ | KC725M | .S..GE | KC725M |
| M3 | .S..GEJ | KC725M | .E..GE | KC725M | .S..GE | KCPK30 |
| K1–K2 | – | – | .S..GE | KCPK30 | – | – |
| K3 | – | – | .S..GE | KCPK30 | – | – |
| N1–N2 | .E..LEJ | KC422M | .E..LEJ | KC422M | .E..LEJ | KC422M |
| N3 | .E..LEJ | KC422M | .E..LEJ | KC422M | .E..LEJ | KC422M |
| S1–S2 | .E..LEJ | KC725M | .S..GEJ | KC725M | .S..GE | KC725M |
| S3 | .E..LEJ | KC725M | .S..GEJ | KC725M | .S..GE | KC725M |
| S4 | .E..LEJ | KC725M | .E..GE | KC725M | .S..GE | KC725M |
| H1 | – | – | .S..GE | KC522M | – | – |
I have read and accepted the Terms & Conditions of use
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Please select a file to download
Models
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?