Beyond Evolution
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (1037)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1037)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1037)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1037)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1037)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1037)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1037)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1037)
- M Stainless Steel (891)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(891)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(891)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(891)
- K Cast Iron (1052)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1052)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1052)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1052)
- N Non-Ferrous Materials (876)
- N1Wrought Aluminum (876)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(847)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (876)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (847)
- N6Carbon, Graphite Composites, CFRP (847)
- S High-Temp Alloys (876)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(876)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(876)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(876)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(876)
- H Hardened Materials (649)
- H1Hardened Materials 44-48 HRC(649)
- H2Hardened Materials 48-55 HRC(649)
Select First Choice
- BR (16)
- CN (187)
- DE (197)
- GB (106)
- IN (21)
- SG (78)
- US (257)
Applications
Applications
Back Boring (510)
Boring (510)
CRT Profiling (2)
Cut-Off (564)
Deep Grooving (38)
Face Grooving (513)
Facing (518)
Grooving (847)
ID Facing (510)
ID Grooving (581)
Multiple Direction Cutting (95)
Plunge Turning (520)
Turning (558)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (748)
- Lightly Interrupted Cut (950)
- Smooth Cut (1081)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (8)
- 90.0 (455)
to
Connection Style
Connection Style
- Boring Bar Shank (52)
- Cutoff Support Blade A1-A3 (49)
- Toolholder (320)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (1039)
to
Over All Length [L]
Over All Length [L]
- 20.198 mm(1)
- 25.198 mm(2)
- 47.75 mm(10)
- 49.62 mm(4)
- 51.75 mm(8)
- 57.75 mm(4)
- 59.62 mm(4)
- 61.746 mm(2)
- 61.75 mm(4)
- 65.62 mm(2)
- 67.75 mm(4)
- 90.25 mm(3)
- 110.25 mm(20)
- 110.251 mm(1)
- 114.3 mm(86)
- 125.0 mm(96)
- 125.25 mm(4)
- 135.299 mm(2)
- 135.855 mm(2)
- 136.449 mm(4)
- 137.004 mm(4)
- 138.75 mm(2)
- 139.9 mm(6)
- 150.0 mm(60)
- 150.15 mm(1)
- 150.245 mm(2)
- 150.248 mm(1)
- 150.25 mm(12)
- 150.251 mm(2)
- 151.4 mm(6)
- 152.4 mm(76)
- 155.299 mm(2)
- 155.855 mm(2)
- 158.75 mm(2)
- 161.852 mm(2)
- 162.404 mm(2)
- 170.0 mm(26)
- 170.25 mm(2)
- 177.8 mm(10)
- 180.0 mm(12)
- 200.0 mm(18)
- 250.0 mm(8)
- 260.0 mm(2)
to
Availability
gsaApproval
gsaApproval
Corner Radius
Corner Radius
- 0.0 mm(122)
- 0.15 mm(26)
- 0.2 mm(440)
- 0.3 mm(89)
- 0.4 mm(423)
- 0.8 mm(315)
- 1.0 mm(108)
- 1.05 mm(115)
- 1.175 mm(26)
- 1.2 mm(198)
- 1.5 mm(101)
- 1.55 mm(96)
- 1.575 mm(109)
- 1.6 mm(106)
- 1.65 mm(107)
- 2.0 mm(82)
- 2.075 mm(90)
- 2.375 mm(87)
- 2.45 mm(89)
- 2.5 mm(52)
- 2.55 mm(48)
- 2.575 mm(59)
- 3.0 mm(47)
- 3.05 mm(43)
- 3.075 mm(54)
- 3.175 mm(54)
- 3.25 mm(50)
- 3.95 mm(33)
- 4.0 mm(27)
- 4.025 mm(31)
- 4.075 mm(35)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(660)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (466)
- KCK20B (472)
- KCM35B (350)
- KCP10B (495)
- KCP25B (505)
- KCP25C (437)
- KCS10B (324)
- KCU10 (543)
- KCU10B (543)
- KCU25 (571)
- KCU25B (571)
Hand Of Tool
Hand Of Tool
- L (194)
- N (30)
- N - Neutral (3)
- R (194)
Wiper Insert
Wiper Insert
- N (1039)
F Dimension
F Dimension
- 1.275 mm(3)
- 1.45 mm(2)
- 1.825 mm(10)
- 2.7 mm(3)
- 3.7 mm(2)
- 5.475 mm(6)
- 5.975 mm(6)
- 8.52 mm(4)
- 9.0 mm(4)
- 9.53 mm(6)
- 10.0 mm(6)
- 11.0 mm(5)
- 11.06 mm(7)
- 11.99 mm(2)
- 12.0 mm(16)
- 12.02 mm(2)
- 12.09 mm(2)
- 12.14 mm(2)
- 12.7 mm(18)
- 12.72 mm(2)
- 12.8 mm(2)
- 12.85 mm(2)
- 13.0 mm(6)
- 13.94 mm(2)
- 13.97 mm(4)
- 15.88 mm(8)
- 15.97 mm(2)
- 16.0 mm(8)
- 16.02 mm(4)
- 16.09 mm(2)
- 16.14 mm(4)
- 17.0 mm(4)
- 17.3 mm(6)
- 17.5 mm(2)
- 19.05 mm(8)
- 19.08 mm(10)
- 19.13 mm(20)
- 19.23 mm(4)
- 20.0 mm(8)
- 20.06 mm(10)
- 20.11 mm(20)
- 20.21 mm(4)
- 21.13 mm(4)
- 22.0 mm(4)
- 25.06 mm(12)
- 25.11 mm(24)
- 25.21 mm(4)
- 25.34 mm(2)
- 25.43 mm(12)
- 25.48 mm(24)
- 25.58 mm(4)
- 25.71 mm(2)
- 26.0 mm(2)
- 31.0 mm(2)
- 31.497 mm(2)
- 31.75 mm(2)
- 31.83 mm(12)
- 31.93 mm(4)
- 32.06 mm(4)
- 32.08 mm(12)
- 32.18 mm(4)
- 32.31 mm(4)
- 32.41 mm(2)
- 32.66 mm(2)
- 38.28 mm(2)
- 38.41 mm(2)
- 38.76 mm(2)
- 40.18 mm(2)
- 40.31 mm(2)
- 40.66 mm(2)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 15.88 mm(4)
- 16.0 mm(4)
- 20.0 mm(12)
- 25.0 mm(10)
- 25.4 mm(2)
- 31.75 mm(6)
- 32.0 mm(6)
- 38.1 mm(4)
- 40.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 15.88 mm(4)
- 16.0 mm(4)
- 20.0 mm(12)
- 25.0 mm(10)
- 25.4 mm(2)
- 31.75 mm(6)
- 32.0 mm(6)
- 38.1 mm(4)
- 40.0 mm(4)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(28)
- 26.0 mm(8)
- 32.0 mm(40)
- 42.0 mm(24)
- 52.0 mm(24)
- 62.0 mm(29)
- 64.0 mm(11)
- 66.0 mm(8)
- 80.0 mm(4)
- 82.0 mm(4)
to
Cutting Direction
Cutting Direction
- B (8)
- E (382)
- S (31)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (34)
- NEUTRAL (ZERO) (18)
- POSITIVE-ZERO (40)
Maximum Bore Depth
Maximum Bore Depth
- 24.0 mm(4)
- 25.4 mm(4)
- 31.75 mm(6)
- 32.0 mm(4)
- 38.1 mm(6)
- 40.0 mm(4)
- 40.28 mm(2)
- 40.3 mm(2)
- 50.0 mm(2)
- 50.3 mm(4)
- 50.8 mm(7)
- 63.4 mm(2)
- 63.5 mm(1)
- 64.0 mm(3)
- 64.01 mm(1)
to
Boring Bar Material
Boring Bar Material
- S (52)
Front-End
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (76)
- SQUARE SHANK ADAPTER (20)
Clamp Style
Clamp Style
- C (54)
- S (38)
- Y (347)
Cutting Width
Cutting Width
- 1.4 mm(26)
- 1.6 mm(53)
- 2.0 mm(113)
- 2.12 mm(115)
- 2.125 mm(117)
- 2.387 mm(104)
- 2.388 mm(123)
- 2.51 mm(110)
- 2.511 mm(110)
- 3.0 mm(111)
- 3.125 mm(134)
- 3.175 mm(129)
- 3.177 mm(97)
- 3.3 mm(101)
- 3.301 mm(108)
- 3.302 mm(116)
- 4.0 mm(92)
- 4.094 mm(96)
- 4.125 mm(116)
- 4.75 mm(95)
- 4.76 mm(82)
- 4.762 mm(81)
- 4.763 mm(82)
- 4.873 mm(78)
- 4.877 mm(106)
- 4.878 mm(84)
- 5.0 mm(62)
- 5.125 mm(86)
- 6.0 mm(57)
- 6.125 mm(79)
- 6.346 mm(43)
- 6.35 mm(76)
- 6.477 mm(57)
- 6.478 mm(53)
- 7.0 mm(47)
- 7.125 mm(48)
- 7.317 mm(42)
- 7.92 mm(29)
- 7.925 mm(35)
- 8.0 mm(37)
- 8.051 mm(27)
- 8.052 mm(37)
- 8.125 mm(59)
- 9.525 mm(16)
- 9.651 mm(8)
- 10.0 mm(13)
- 10.125 mm(20)
to
Front End Type
Front End Type
- MCS - Modular Cartridge System (76)
- VKT - Square Shank (20)
Insert Shape
Insert Shape
- PRISMATIC (1081)
Cartridge Size
Cartridge Size
- 50 (104)
- 65 (74)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (76)
- VKT01 Std Design (20)
Insert Size
Insert Size
- 10 (8)
- 1F (12)
- 2 (64)
- 3 (56)
- 4 (56)
- 5 (36)
- 6 (32)
- 8 (16)
Maximum Cutting Depth
Maximum Cutting Depth
- 5.0 mm(8)
- 7.0 mm(24)
- 9.519 mm(1)
- 9.52 mm(1)
- 10.0 mm(40)
- 11.0 mm(1)
- 12.0 mm(18)
- 12.63 mm(2)
- 13.0 mm(8)
- 14.0 mm(2)
- 15.0 mm(1)
- 16.0 mm(150)
- 17.0 mm(1)
- 20.0 mm(1)
- 22.0 mm(28)
- 26.0 mm(82)
- 30.0 mm(1)
- 32.0 mm(38)
- 33.0 mm(10)
- 40.0 mm(26)
- 50.0 mm(5)
- 60.0 mm(5)
- 120.0 mm(1)
to
Gage Length
Gage Length
- 22.0000 mm(12)
- 28.0000 mm(2)
- 33.0000 mm(2)
- 38.0000 mm(2)
- 43.0000 mm(2)
- 47.0000 mm(6)
- 48.0000 mm(6)
- 49.0000 mm(4)
- 53.5000 mm(4)
- 55.5000 mm(2)
- 57.0000 mm(6)
- 58.0000 mm(6)
- 58.5000 mm(6)
- 60.5000 mm(2)
- 63.5000 mm(12)
- 65.5000 mm(2)
- 66.5000 mm(4)
- 68.5000 mm(4)
- 73.5000 mm(4)
- 138.1500 mm(2)
- 138.7500 mm(2)
- 139.2500 mm(2)
- 139.9000 mm(6)
- 140.4000 mm(6)
- 140.5500 mm(4)
- 150.0000 mm(2)
- 152.4000 mm(4)
- 158.1500 mm(2)
- 158.7500 mm(2)
- 159.2500 mm(2)
- 165.9500 mm(2)
- 170.0000 mm(2)
- 177.8000 mm(2)
Insert Geometry
Shape
Shape
- PRISMATIC (618)
Insert Seat Size
Insert Seat Size
- 10 (25)
- 1F (12)
- 2 (64)
- 3 (124)
- 4 (123)
- 5 (54)
- 6 (124)
- 8 (92)
Cutting Tool Material
Cutting Tool Material
- B L (414)
- H W (1081)
Back-End
Connection Type
Connection Type
- BORING BAR (52)
- CUTOFF BLADE (46)
- Cutoff Blade (3)
- SQUARE SHANK (320)
System Size
System Size
- KM40TS (4)
- KM4X63 (4)
- KM50TS (8)
- KM63TS (8)
- KM63XMZ (8)
- KM80ATC (8)
- KM80TS (8)
- PSC40 (4)
- PSC50 (8)
- PSC63 (8)
- PSC80 (8)
- VDI30 (10)
- VDI40 (10)
Back-End Diameter
Back-End Diameter
- 12.0 mm(4)
- 12.7 mm(4)
- 15.87 mm(4)
- 15.875 mm(2)
- 16.0 mm(6)
- 19.05 mm(6)
- 20.0 mm(6)
- 25.0 mm(6)
- 25.4 mm(6)
- 30.0 mm(10)
- 31.7 mm(1)
- 31.75 mm(3)
- 32.0 mm(4)
- 40.0 mm(18)
- 50.0 mm(16)
- 63.0 mm(28)
- 80.0 mm(24)
to
Shank Height
Shank Height
- 9.53 mm(6)
- 10.0 mm(6)
- 12.0 mm(24)
- 12.71 mm(24)
- 15.88 mm(14)
- 16.0 mm(14)
- 19.0 mm(6)
- 19.05 mm(42)
- 20.0 mm(44)
- 25.0 mm(56)
- 25.4 mm(58)
- 26.0 mm(20)
- 31.75 mm(34)
- 32.0 mm(55)
- 38.1 mm(18)
- 40.0 mm(6)
- 52.5 mm(2)
to
Shank Width
Shank Width
- 1.65 mm(6)
- 1.8 mm(5)
- 2.4 mm(8)
- 3.4 mm(5)
- 4.4 mm(3)
- 5.4 mm(4)
- 7.0 mm(2)
- 7.95 mm(16)
- 9.525 mm(3)
- 9.53 mm(3)
- 10.0 mm(6)
- 12.0 mm(24)
- 12.71 mm(24)
- 15.875 mm(3)
- 15.88 mm(11)
- 16.0 mm(14)
- 19.05 mm(42)
- 20.0 mm(44)
- 25.0 mm(56)
- 25.4 mm(58)
- 31.75 mm(34)
- 32.0 mm(34)
- 38.1 mm(18)
- 40.0 mm(6)
to
No filters matching ""
