Willkommen
Bestätigen Sie bitte Ihre Präferenzen
Einstellungen aktualisieren
Produktvorschläge
Product Family suggestions
Kennametal steht Ihnen zur Diensten
Hallo, User Name
Das von Ihnen ausgewählte Konto:
Es gibt ein Problem mit Ihrem Konto. Bitte kontaktieren Sie den Kundendienst.
Kundenkonto
Konto ändern
Lieferadresse
Konto ändern
- Übersicht
- Bestellungen verwalten
- Kanäle verwalten
- Adressbuch
-
Notifications
Mark all as read - Passwort ändern
- Mein Profil
- Abmelden
Artikel
erfolgreich zum Warenkorb hinzugefügt
Warenkorb anzeigen
Warenkorb anzeigen
Beginnen Sie das Jahr 2024 mit phänomenalen Einsparungen bei Bohrwerkzeugen.
Jetzt bestellen.
Kennametal steht Ihnen zur Diensten
Artikel
erfolgreich zum Warenkorb hinzugefügt
Warenkorb anzeigen
Warenkorb anzeigen
Lösung bearbeiten
Lösung hinzufügen
Lösungsname: {{SolutionName}}- Produkte
- /
- Metallbearbeitungswerkzeuge
- /
- Bohren
- /
- Vollhartmetallbohrer
- /
- KMH-Bohrer • Harte Werkstoffe
- /
- B951A (~3 x D) • KCH15 • A-Shank • KMH Drills
Sending to SolidCAM in progress...
Downloaded file will be available after import in the SolidCAM tool library.
B951A (~3 x D) • KCH15 • A-Shank • KMH Drills
KMH Bohrer • Gehärtete Werkstoffe • Innere Kühlmittelzuführung
Features and benefits
- The all new KMH solid carbide drills are engineered for hard material applications up to 65 HRC. The B95_ drill series with through coolant and 140° point is designed for deeper applications.
- KMH Point Design with curved cutting edge with corner chamfer for maximum corner stability in hard materials. It avoids chipping on cutting edge thus pre-mature wear.
- Special flute design with strong web to increase the strength of the drill in tough applications with short chips. B95_ series with 30° helix angle to improve chip evacuation in higher length-to-diameter ratios.
- KCH15 on B95_ with its higher toughness supports edge strength at increased rake angles, which are applied to improve chip evacuation in higher L/D ratios. It carries a high temperature and shock resistance AlTiN coating for machining hardened material to increase tool life.
Uses and application
- Drilling
- Drilling: Stacked Plates
- Corner Style: Corner Chamfer
- Werkzeugabmessungen: 2 Schneidreihen / 2 Führungsfasen / Innere Kühlmittelzuführung
- DIN 6535
- DIN 6537
- Drilling - Through Coolant
- Innere Kühlmittelzuführung: MQL (Minimalmengenschmierung): Bohren
- Zylinderschaft – ohne Spannfläche ≤h6
- Spiralwinkel: 30°
Tolerance • Metric | ||
nominal size range | D1 tolerance m7 | D tolerance h6 |
|
0,004/0,016 | 0,000/-0,008 |
|
0,006/0,021 | 0,000/-0,009 |
|
0,007/0,025 | 0,000/-0,011 |
|
0,008/0,029 | 0,000/-0,013 |
Tolerance • Inch | ||
nominal size range | D1 tolerance m7 | D tolerance h6 |
|
.0002/.0006 | .0000/-.0003 |
|
.0002/.0008 | .0000/-.0004 |
|
.0003/.0010 | .0000/-.0004 |
|
.0003/.0011 | .0000/-.0005 |
Material
|
<="" td=""> | <="" td="" /> | |||||||||||
Cutting Speed
|
Metric | ||||||||||||
Range
|
Recommended Feed Rate per Rev | ||||||||||||
Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | |||
P | 4 | 50 | 70 | 100 | mm/r | 0,06–0,15 | 0,08–0,17 | 0,12–0,23 | 0,14–0,28 | 0,17–0,33 | 0,19–0,38 | 0,23–0,47 | 0,29–0,59 |
5 | 50 | 60 | 80 | mm/r | 0,08–0,14 | 0,10–0,16 | 0,12–0,20 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 | |
6 | 40 | 50 | 70 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,08–0,14 | 0,10–0,18 | 0,13–0,22 | 0,14–0,24 | 0,18–0,32 | 0,23–0,41 | |
K | 1 | 80 | 130 | 170 | mm/r | 0,11–0,22 | 0,12–0,24 | 0,16–0,31 | 0,20–0,38 | 0,23–0,44 | 0,25–0,49 | 0,31–0,06 | 0,38–0,47 |
2 | 90 | 110 | 120 | mm/r | 0,10–0,17 | 0,12–0,19 | 0,16–0,25 | 0,20–0,31 | 0,23–0,36 | 0,25–0,40 | 0,31–0,48 | 0,38–0,60 | |
3 | 80 | 110 | 130 | mm/r | 0,07–0,15 | 0,09–0,19 | 0,12–0,25 | 0,14–0,30 | 0,17–0,35 | 0,19–0,40 | 0,25–0,48 | 0,30–0,60 | |
H | 1 | 20 | 35 | 45 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,09–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 |
2 | 15 | 30 | 45 | mm/r | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 | |
3 | 15 | 25 | 40 | mm/r | 0,02–0,04 | 0,02–0,05 | 0,04–0,07 | 0,06–0,09 | 0,07–0,10 | 0,08–0,11 | 0,09–0,13 | 0,10–0,15 | |
4 | 15 | 20 | 35 | mm/r | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 |
Material
|
<="" td=""> | <="" td="" /> | |||||||||||
Material
|
Cutting Speed
|
Inch | |||||||||||
Range
|
Recommended Feed Rate per Rev | ||||||||||||
Min | Starting Value | Max | 1/8 .125 | 3/16 .188 | 1/4 .250 | 5/16 .313 | 3/8 .375 | 1/2 .500 | 5/8 .625 | 3/4 .750 | |||
P | 4 | 160 | 230 | 330 | IPR | .0024-.0059 | .0031-.0067 | .0047-.0091 | .0055-.0110 | .0067-.0130 | .0075-.0150 | .0091-.0185 | .0114-.0232 |
5 | 160 | 200 | 260 | IPR | .0031–.0055 | .0039–.0079 | .0047–.0079 | .0063–.0094 | .0079–.0110 | .0094–.0126 | .0110–.0157 | .0126–.0189 | |
6 | 130 | 160 | 230 | IPR | .0020-.0031 | .0024-.0039 | .0031-.0055 | .0039-.0071 | .0051-.0087 | .0055-.0094 | .0071-.0126 | .0091-.0161 | |
K | 1 | 260 | 430 | 560 | IPR | .0043-.0087 | .0047-.0094 | .0063-.0122 | .0079-.0150 | .0091-.0173 | .0098-.0193 | .0122-.0024 | .0150-.0185 |
2 | 300 | 360 | 390 | IPR | .0039–.0067 | .0047–.0075 | .0063–.0098 | .0079–.0122 | .0091–.0142 | .0098–.0157 | .0122–.0189 | .0150–.0236 | |
3 | 260 | 360 | 430 | IPR | .0028-.0059 | .0035-.0075 | .0047-.0098 | .0055-.0118 | .0067-.0138 | .0075-.0157 | .0098-.0189 | .0118-.0236 | |
H | 1 | 70 | 110 | 150 | IPR | .0012-.0024 | .0016-.0031 | .0024-.0039 | .0031-.0047 | .0035-.0051 | .0039-.0055 | .0047-.0063 | .0055-.0071 |
2 | 50 | 100 | 150 | IPR | .0008–.0016 | .0012–.0024 | .0020–.0031 | .0028–.0039 | .0031–.0043 | .0035–.0047 | .0039–.0055 | .0043–.0063 | |
3 | 50 | 80 | 130 | IPR | .0008-.0016 | .0008-.0020 | .0016-.0028 | .0024-.0035 | .0028-.0039 | .0031-.0043 | .0035-.0051 | .0039-.0059 | |
4 | 50 | 70 | 110 | IPR | .0008–.0016 | .0012–.0024 | .0020–.0031 | .0028–.0039 | .0031–.0043 | .0035–.0047 | .0039–.0055 | .0043–.0063 |
<="" td=""> | <="" td="" /> | ||||||||||||
Cutting Speed
|
Metric | ||||||||||||
Range
|
Recommended Feed Rate per Rev | ||||||||||||
Material
|
Min | Starting Value | Max | 3,0 | 4,0 | 6,0 | 8,0 | 10,0 | 12,0 | 16,0 | 20,0 | ||
P | 4 | 50 | 70 | 100 | mm/r | 0,06–0,15 | 0,08–0,17 | 0,12–0,23 | 0,14–0,28 | 0,17–0,33 | 0,19–0,38 | 0,23–0,47 | 0,29–0,59 |
5 | 50 | 60 | 80 | mm/r | 0,08–0,14 | 0,10–0,16 | 0,12–0,20 | 0,16–0,24 | 0,20–0,28 | 0,24–0,32 | 0,28–0,40 | 0,32–0,48 | |
6 | 40 | 50 | 70 | mm/r | 0,05–0,08 | 0,06–0,10 | 0,08–0,14 | 0,10–0,18 | 0,13–0,22 | 0,14–0,24 | 0,18–0,32 | 0,23–0,41 | |
K | 1 | 80 | 130 | 170 | mm/r | 0,11–0,22 | 0,12–0,24 | 0,16–0,31 | 0,20–0,38 | 0,23–0,44 | 0,25–0,49 | 0,31–0,06 | 0,38–0,47 |
2 | 90 | 110 | 120 | mm/r | 0,10–0,17 | 0,12–0,19 | 0,16–0,25 | 0,20–0,31 | 0,23–0,36 | 0,25–0,40 | 0,31–0,48 | 0,38–0,60 | |
3 | 80 | 110 | 130 | mm/r | 0,07–0,15 | 0,09–0,19 | 0,12–0,25 | 0,14–0,30 | 0,17–0,35 | 0,19–0,40 | 0,25–0,48 | 0,30–0,60 | |
H | 1 | 20 | 35 | 45 | mm/r | 0,03–0,06 | 0,04–0,08 | 0,06–0,10 | 0,08–0,12 | 0,09–0,13 | 0,10–0,14 | 0,12–0,16 | 0,14–0,18 |
2 | 15 | 30 | 45 | mm/r | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 | |
3 | 15 | 25 | 40 | mm/r | 0,02–0,04 | 0,02–0,05 | 0,04–0,07 | 0,06–0,09 | 0,07–0,10 | 0,08–0,11 | 0,09–0,13 | 0,10–0,15 | |
4 | 15 | 20 | 35 | mm/r | 0,02–0,04 | 0,03–0,06 | 0,05–0,08 | 0,07–0,10 | 0,08–0,11 | 0,09–0,12 | 0,10–0,14 | 0,11–0,16 |