successfully added to cart
View Cart
ebore™ • Brücke S/L • Wendeschneidplattenhalter • CC12
ebore™ • Brücke S/L • Wendeschneidplattenhalter • CC12
ebore™ • Brücke S/L • Wendeschneidplattenhalter • CC12
ebore™ • Brücke S/L • Wendeschneidplattenhalter • CC12

ebore™ • Brücke • Wendeschneidplattenhalter • CC12

ebore™ • Brücke S/L • Wendeschneidplattenhalter • CC12

Uses and application

  • Through Coolant: Axial: DrillingThrough Coolant: Axial: Drilling
  • Reiben: DurchgangsbohrungReiben: Durchgangsbohrung
  • Reiben: SacklochbohrungReiben: Sacklochbohrung
  • Reiben: Durchgangsbohrung mit QuerbohrungReiben: Durchgangsbohrung mit Querbohrung
  • Reiben: Sacklochbohrung mit QuerbohrungenReiben: Sacklochbohrung mit Querbohrungen

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (1)
  • Blind Hole Finishing Blind Hole Finishing (1)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (1)
  • Through Hole Finishing Through Hole Finishing (1)
Workpiece Material
  • P Steel (1)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1)
  • M Stainless Steel (1)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1)
  • K Cast Iron (1)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum
      (1)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1)
    • N6
      Carbon, Graphite Composites, CFRP
      (1)
    • N7
      MMC's
      (1)
  • S High-Temp Alloys (1)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1)
  • H Hardened Materials (1)
    • H1
      Hardened Materials 44-48 HRC
      (1)
    • H2
      Hardened Materials 48-55 HRC
      (1)
    • H3
      Hardened Materials 56-60 HRC
      (1)
    • H4
      Hardened Materials >60 HRC
      (1)
Cutting Condition
  • Heavily Interrupted Cut (1)
  • Lightly Interrupted Cut (1)
  • Smooth Cut (1)
  • Varying Depth of Cut (1)
Cutting Condition Material
  • H-All (1)
  • K-All (1)
  • M-All (1)
  • N-All (1)
  • P-All (1)
  • S-All (1)
cornerConfiguration
Corner Radius
  • 0.1 (1)
  • 0.2 (1)
  • 0.4 (1)
  • 0.794 (1)
  • 0.8 (1)
  • 1.2 (1)
to
Corner Radius
  • 0.004 (1)
  • 0.008 (1)
  • 0.0156 (1)
  • 0.0158 (1)
  • 0.016 (1)
  • 0.0312 (1)
  • 0.0313 (1)
  • 0.0315 (1)
  • 0.0469 (1)
  • 0.047 (1)
to
application
Grade Of Cutting Tool
  • HCK10 (1)
  • HK35 (1)
  • HT2 (1)
  • HTX (1)
  • HWK15 (1)
  • K10M (1)
  • K10P (1)
  • K20K (1)
  • K313 (1)
  • K68 (1)
  • KB1345 (1)
  • KB1630 (1)
  • KBH20 (1)
  • KC5010 (1)
  • KC5025 (1)
  • KC5410 (1)
  • KC720 (1)
  • KC730 (1)
  • KC732 (1)
  • KC8050 (1)
  • KC810 (1)
  • KC850 (1)
  • KC9025 (1)
  • KC910 (1)
  • KC9105 (1)
  • KC9110 (1)
  • KC9125 (1)
  • KC9225 (1)
  • KC9240 (1)
  • KC9240NEW (1)
  • KC9315 (1)
  • KC9320 (1)
  • KC9325 (1)
  • KC935 (1)
  • KCD25 (1)
  • KCK05 (1)
  • KCK15 (1)
  • KCK15B (1)
  • KCK20 (1)
  • KCK20B (1)
  • KCM15 (1)
  • KCM15B (1)
  • KCM25 (1)
  • KCM25B (1)
  • KCM35 (1)
  • KCP05 (1)
  • KCP10 (1)
  • KCP10B (1)
  • KCP25 (1)
  • KCP25B (1)
  • KCP30 (1)
  • KCP30B (1)
  • KCS10 (1)
  • KCS10B (1)
  • KCU10 (1)
  • KCU25 (1)
  • KT315 (1)
  • KT325 (1)
  • KU10T (1)
  • KU30T (1)
  • NL300 (1)
  • NL920 (1)
  • PB170 (1)
  • PB250 (1)
  • PD100 (1)
  • PD50 (1)
  • SP0PW3 (1)
  • SP4019 (1)
  • THM (1)
  • THM-X (1)
  • TN10P (1)
  • TN10U (1)
  • TN15M (1)
  • TN2000 (1)
  • TN20K (1)
  • TN20P (1)
  • TN30M (1)
  • TN5015 (1)
  • TN5020 (1)
  • TN5105 (1)
  • TN5120 (1)
  • TN6010 (1)
  • TN7010 (1)
  • TN7015 (1)
  • TN7025 (1)
  • TN7035 (1)
  • TN7105 (1)
  • TN7110 (1)
  • TN7115 (1)
  • TN7125 (1)
  • TN7135 (1)
  • TN8025 (1)
  • TTR (1)
  • W00342 (1)
  • WBH20P (1)
  • WBK45U (1)
  • WK05CT (1)
  • WK15CT (1)
  • WK20CT (1)
  • WM15CT (1)
  • WM25CT (1)
  • WP15CT (1)
  • WP25CT (1)
  • WP35CT (1)
  • WS10PT (1)
  • WU10HT (1)
insertGeometry
Cutting Tool Material
  • B H (1)
  • B L (1)
  • D P (1)
  • H T (1)
  • H W (1)
other
Insert Hand
  • N (1)
  • R (1)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 1 of 1 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [DMAX] Maximum Bore Diameter [DMAX] Maximum Bore Diameter [L1] Tool Length [L1] Tool Length
6655283 IHBDGCC12 IHBDGCC12 200.0000 7.874 1020.0000 40.157 30.0610 1.183
    List price:
    $624.00 /each.
    Your price::
    Qty
    List price:
    Discount: %
    Your price::
    Replacement This item is not available
    Replacement Product This item may be available through a distributor
    Qty

    Sold in pkg. of

    product-image
    Please adjust the following properties from

    ISO Katalog

    ANSI Katalog

    to find similar products.
    If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
    You are about to create a duplicate . Do you want to proceed?
    You are about to delete Do you want to proceed?
    What would you like to rename your to?
    Please enter a valid name
    Please enter a name for the duplicate
    Please enter a valid name
    You are about to add to your My Solutions page. Do you want to proceed?
    Please enter a valid name
    Send a copy of

    Please enter a valid Email
    Please enter a valid name

    We have found the following CAD Drawings

    Select the files you are looking for and download them all at once

    You should be logged to see your dashboard information
    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
    item(s) successfully added to the cart
    View Cart