Filters and Columns
Filters
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (2)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
-
-
M Stainless Steel (2)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
-
-
K Cast Iron (2)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
-
-
S High-Temp Alloys (2)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
-
application
Grade Of Cutting Tool
Grade Of Cutting Tool
-
KC610M (2)
-
KC620M (1)
frontEnd
Cutting Width
Cutting Width
-
0.59 in (2)
-
0.941 in (1)
to
Cutting Width
Cutting Width
-
14.976 mm (2)
-
23.875 mm (1)
to
Thread Pitch
Thread Pitch
-
1.5 mm (2)
-
2.0 mm (1)
to
Thread Pitch
Thread Pitch
-
0.06 in (2)
-
0.079 in (1)
to
insertGeometry
Insert IC Size
Insert IC Size
-
9.525 mm (2)
-
15.875 mm (1)
to
Insert IC Size
Insert IC Size
-
0.015 in (2)
-
0.025 in (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying
1- 3
of 3 results
Metric
Inch
Show
Metric
Inch
SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | Thread Pitch | INS_IRR_CTLG_THREAD_PITCH_I | [D] Insert IC Size | [D] Insert IC Size | [LI] Insert Length | [LI] Insert Length | [W] Cutting Width | [W] Cutting Width | Number of Teeth | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1138033 | STN16150ISOE | STN16150ISOE | KC610M | 1,5 | 9.5250 | .3750 | 16.0020 | .6300 | 14.9860 | .5900 | 10 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$60.00
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1138041 | STN16150ISOE | STN16150ISOE | KC620M | 1,5 | 9.5250 | .3750 | 16.0020 | .6300 | 14.9860 | .5900 | 10 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$60.00
/each.
Your price::
Qty
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1138136 | STN27200ISOE | STN27200ISOE | KC610M | 2,0 | 15.8750 | .6250 | 26.9240 | 1.060 | 23.8760 | .9400 | 12 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
List price:
$109.90
/each.
Your price::
Qty
|
List price:
Discount: %
Replacement
This item is not available
Replacement Product This item may be available through a distributor
Replacement Product This item may be available through a distributor
Qty
Sold in pkg. of
Grades
-
KC610M
Beschichtetes feinkörniges Hartmetall mit harter PVD-Beschichtung (TiCN-TiN), besonders geeignet für sehr verschleißfeste Anwendungen. Nur mit Kühlschmiermittel oder mit Minimalmengenschmierung (MQL) verwenden.
P SteelS High-Temp AlloysK Cast IronM Stainless Steel -
KC620M
Coated carbide grade with a PVD coat (TiN). Coated carbide grade with a PVD coat (TiN). KC620M is suitable for machining cast iron, non-ferrous material, Aluminum alloys. This grade is suitable for both wet and dry machining. suitable for machining cast iron, non-ferrous material, aluminum alloys. This grade is suitable for both wet and dry machining.
TM25 Schnittdatenempfehlung
Materials | Brinell | surface speeds | indexable inserts | |
steel | HB | KC610M | KC635M | feed fz (IPT) |
P1 | 125 | 100–210 | 90–180 | 0,05–0,20 |
P2 | 180 | 100–170 | 90–160 | 0,05–0,20 |
P3 | 225 | 60–130 | 70–115 | 0,05–0,20 |
P4 | 250 | 80–150 | 80–160 | 0,05–0,20 |
P5 | 275 | 75–130 | 80–160 | 0,05–0,15 |
P6 | 325 | 70–110 | 60–100 | 0,05–0,10 |
stainless steel | ||||
M1 | 180 | 100–170 | 120–180 | 0,05–0,10 |
M2 | 250 | 70–140 | 100–140 | 0,05–0,10 |
M3 | 330 | 70–120 | 100–120 | 0,05–0,10 |
cast iron | ||||
K1 | 180 | 60–130 | 100–120 | 0,02–0,08 |
K2 | 220 | 60–125 | 80–100 | 0,05–0,15 |
K3 | 260 | 50–90 | 60–90 | 0,05–0,10 |
non-ferrous | ||||
N1 | 60–100 | 100–250 | – | 0,05–0,25 |
high-temp alloys | ||||
S1 | 200 | 20–45 | 20–40 | 0,05–0,10 |
S2 | 250 | 20–30 | 20–30 | 0,02–0,05 |
S3 | 280 | 15–20 | 15–20 | 0,02–0,05 |
S4 | 350 | 10–15 | 10–15 | 0,02–0,05 |
hardened steel | ||||
H1 | 55 HRC | 20–45 | 20–45 | 0,01–0,03 |
STN Series
Materials | Brinell | surface speeds | indexable inserts | |
steel | HB | KC610M | KC635M | feed fz (IPT) |
P1 | 125 | 325–675 | 290–590 | .002–.008 |
P2 | 180 | 290–550 | 290–520 | .002–.008 |
P3 | 225 | 200–425 | 225–375 | .002–.008 |
P4 | 250 | 250–490 | 250–500 | .002–.008 |
P5 | 275 | 250–425 | 250–500 | .002–.006 |
P6 | 325 | 225–350 | 200–325 | .002–.004 |
stainless steel | ||||
M1 | 180 | 325–550 | 375–590 | .002–.004 |
M2 | 250 | 225–450 | 325–450 | .002–.004 |
M3 | 330 | 225–375 | 325–375 | .002–.004 |
cast iron | ||||
K1 | 180 | 200–425 | 325–450 | .001–.003 |
K2 | 220 | 200–390 | 250–325 | .002–.006 |
K3 | 260 | 160–290 | 200–275 | .002–.004 |
non-ferrous | ||||
N1 | 60–100 | 325–820 | – | .002–.010 |
high-temp alloys | ||||
S1 | 200 | 65–140 | 65–130 | .002–.004 |
S2 | 250 | 65–90 | 65–90 | .001–.002 |
S3 | 280 | 50–65 | 50–65 | .001–.002 |
S4 | 350 | 30–50 | 30–50 | .001–.002 |
hardened steel | ||||
H1 | 55HRc | 65–140 | 65–140 | .0004–.001 |