Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Wendeschneidplattenbohren

Select Filters
Filters
Filters
    • Applied Filters:
    • Clear all filters
  • X First Choice:
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (275)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (275)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (275)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (275)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (275)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (275)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (263)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (263)
  • M Stainless Steel (267)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (267)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (267)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (261)
  • K Cast Iron (261)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (261)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (261)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (261)
  • N Non-Ferrous Materials (264)
    • N1
      Wrought Aluminum
      (264)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (264)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (264)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (252)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (258)
    • N6
      Carbon, Graphite Composites, CFRP
      (246)
    • N7
      MMC's
      (232)
  • S High-Temp Alloys (267)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (261)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (261)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (267)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (267)
  • H Hardened Materials (97)
    • H1
      Hardened Materials 44-48 HRC
      (97)
    • H2
      Hardened Materials 48-55 HRC
      (97)
    • H3
      Hardened Materials 56-60 HRC
      (97)
    • H4
      Hardened Materials >60 HRC
      (97)
Select First Choice
  • BR (71)
  • CN (275)
  • DE (275)
  • GB (162)
  • IN (72)
  • SG (102)
  • US (366)
Applications
Applications
  • Convex Drilling Convex Drilling (55)
  • Drilling Drilling (157)
  • ID Thread Turning ID Thread Turning (7)
  • Inclined Entry Drilling Inclined Entry Drilling (55)
  • Inclined Exit Drilling Inclined Exit Drilling (55)
  • X-Offset Drilling X-Offset Drilling (56)
Cutting Diameter
Cutting Diameter
  • 0.492 in (2)
  • 0.5 in (2)
  • 0.512 in (2)
  • 0.531 in (2)
  • 0.551 in (4)
  • 0.572 in (4)
  • 0.591 in (4)
  • 0.61 in (4)
  • 0.63 in (4)
  • 0.65 in (4)
  • 0.669 in (4)
  • 0.69 in (5)
  • 0.709 in (5)
  • 0.728 in (5)
  • 0.748 in (5)
  • 0.768 in (5)
  • 0.787 in (5)
  • 0.807 in (3)
  • 0.828 in (5)
  • 0.866 in (5)
  • 0.906 in (5)
  • 0.946 in (5)
  • 0.984 in (2)
  • 1.024 in (2)
  • 1.043 in (2)
  • 1.063 in (2)
  • 1.102 in (2)
  • 1.143 in (2)
  • 1.181 in (2)
  • 1.22 in (2)
  • 1.26 in (2)
  • 1.299 in (2)
  • 1.339 in (2)
  • 1.379 in (2)
  • 1.417 in (2)
  • 1.457 in (2)
  • 1.476 in (2)
  • 1.496 in (2)
  • 1.536 in (2)
  • 1.575 in (2)
  • 1.614 in (2)
  • 1.655 in (2)
  • 1.693 in (2)
  • 1.732 in (2)
  • 1.772 in (2)
  • 1.811 in (2)
  • 1.85 in (2)
  • 1.891 in (2)
  • 1.929 in (2)
  • 1.969 in (2)
  • 1.988 in (2)
  • 2.008 in (2)
  • 2.047 in (2)
  • 2.087 in (2)
  • 2.126 in (2)
  • 2.165 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.5 mm (2)
  • 12.701 mm (2)
  • 13.0 mm (2)
  • 13.5 mm (2)
  • 14.0 mm (4)
  • 14.5 mm (4)
  • 15.0 mm (4)
  • 15.5 mm (4)
  • 16.0 mm (4)
  • 16.5 mm (4)
  • 17.0 mm (4)
  • 17.5 mm (5)
  • 18.0 mm (5)
  • 18.5 mm (5)
  • 19.0 mm (5)
  • 19.5 mm (5)
  • 20.0 mm (5)
  • 20.5 mm (3)
  • 21.0 mm (5)
  • 22.0 mm (5)
  • 23.0 mm (5)
  • 24.0 mm (5)
  • 25.0 mm (2)
  • 26.0 mm (2)
  • 26.5 mm (2)
  • 27.0 mm (2)
  • 28.0 mm (2)
  • 29.0 mm (2)
  • 30.0 mm (2)
  • 31.0 mm (2)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 34.0 mm (2)
  • 35.0 mm (2)
  • 36.0 mm (2)
  • 37.0 mm (2)
  • 37.5 mm (2)
  • 38.0 mm (2)
  • 39.0 mm (2)
  • 40.0 mm (2)
  • 41.0 mm (2)
  • 42.0 mm (2)
  • 43.0 mm (2)
  • 44.0 mm (2)
  • 45.0 mm (2)
  • 46.0 mm (2)
  • 47.0 mm (2)
  • 48.0 mm (2)
  • 49.0 mm (2)
  • 50.0 mm (2)
  • 50.5 mm (2)
  • 51.0 mm (2)
  • 52.0 mm (2)
  • 53.0 mm (2)
  • 54.0 mm (2)
  • 55.0 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (67)
  • Stable (73)
  • Unstable (89)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 26.0 mm (1)
  • 27.0 mm (1)
  • 28.0 mm (2)
  • 29.0 mm (2)
  • 30.0 mm (2)
  • 31.0 mm (2)
  • 32.0 mm (2)
  • 33.0 mm (2)
  • 34.0 mm (2)
  • 35.0 mm (2)
  • 36.0 mm (2)
  • 37.0 mm (2)
  • 37.5 mm (1)
  • 38.0 mm (2)
  • 38.1 mm (1)
  • 39.0 mm (3)
  • 40.0 mm (2)
  • 40.5 mm (1)
  • 41.0 mm (1)
  • 42.0 mm (4)
  • 43.5 mm (2)
  • 44.0 mm (2)
  • 45.0 mm (2)
  • 46.0 mm (2)
  • 46.5 mm (2)
  • 48.0 mm (4)
  • 49.5 mm (2)
  • 50.0 mm (1)
  • 51.0 mm (2)
  • 52.0 mm (1)
  • 52.5 mm (3)
  • 53.0 mm (1)
  • 54.0 mm (4)
  • 55.5 mm (3)
  • 56.0 mm (1)
  • 57.0 mm (3)
  • 58.0 mm (1)
  • 58.5 mm (3)
  • 60.0 mm (4)
  • 61.5 mm (2)
  • 62.0 mm (1)
  • 63.0 mm (3)
  • 64.0 mm (1)
  • 66.0 mm (4)
  • 68.0 mm (1)
  • 69.0 mm (3)
  • 70.0 mm (1)
  • 72.0 mm (4)
  • 74.0 mm (1)
  • 75.0 mm (2)
  • 76.0 mm (1)
  • 78.0 mm (2)
  • 79.5 mm (1)
  • 80.0 mm (1)
  • 81.0 mm (1)
  • 82.0 mm (1)
  • 84.0 mm (2)
  • 86.0 mm (1)
  • 87.0 mm (1)
  • 88.0 mm (1)
  • 90.0 mm (2)
  • 92.0 mm (1)
  • 93.0 mm (1)
  • 94.0 mm (1)
  • 96.0 mm (2)
  • 98.0 mm (1)
  • 99.0 mm (1)
  • 100.0 mm (2)
  • 102.0 mm (2)
  • 104.0 mm (1)
  • 105.0 mm (1)
  • 106.0 mm (1)
  • 108.0 mm (2)
  • 110.0 mm (1)
  • 111.0 mm (1)
  • 112.5 mm (1)
  • 114.0 mm (1)
  • 117.0 mm (1)
  • 120.0 mm (1)
  • 123.0 mm (1)
  • 126.0 mm (1)
  • 129.0 mm (1)
  • 132.0 mm (1)
  • 135.0 mm (1)
  • 138.0 mm (1)
  • 141.0 mm (1)
  • 144.0 mm (1)
  • 147.0 mm (1)
  • 150.0 mm (1)
  • 151.5 mm (1)
  • 153.0 mm (1)
  • 156.0 mm (1)
  • 159.0 mm (1)
  • 162.0 mm (1)
  • 165.0 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.038 in (1)
  • 0.039 in (1)
  • 0.04 in (1)
  • 0.042 in (1)
  • 0.044 in (2)
  • 0.045 in (2)
  • 0.046 in (2)
  • 0.048 in (2)
  • 0.049 in (2)
  • 0.052 in (2)
  • 0.053 in (2)
  • 0.054 in (2)
  • 0.056 in (2)
  • 0.057 in (2)
  • 0.058 in (1)
  • 0.06 in (6)
  • 0.062 in (2)
  • 0.063 in (1)
  • 0.064 in (1)
  • 0.065 in (4)
  • 0.068 in (4)
  • 0.07 in (2)
  • 0.072 in (2)
  • 0.073 in (2)
  • 0.075 in (4)
  • 0.077 in (2)
  • 0.078 in (1)
  • 0.079 in (2)
  • 0.081 in (1)
  • 0.082 in (4)
  • 0.084 in (4)
  • 0.087 in (3)
  • 0.088 in (1)
  • 0.089 in (3)
  • 0.09 in (1)
  • 0.091 in (3)
  • 0.093 in (4)
  • 0.095 in (2)
  • 0.096 in (1)
  • 0.097 in (3)
  • 0.099 in (1)
  • 0.103 in (4)
  • 0.105 in (1)
  • 0.107 in (3)
  • 0.108 in (1)
  • 0.111 in (4)
  • 0.115 in (1)
  • 0.116 in (2)
  • 0.119 in (1)
  • 0.121 in (2)
  • 0.123 in (1)
  • 0.124 in (1)
  • 0.126 in (1)
  • 0.127 in (1)
  • 0.13 in (2)
  • 0.133 in (1)
  • 0.135 in (1)
  • 0.137 in (1)
  • 0.14 in (2)
  • 0.144 in (1)
  • 0.145 in (1)
  • 0.146 in (1)
  • 0.149 in (2)
  • 0.152 in (1)
  • 0.154 in (1)
  • 0.155 in (2)
  • 0.158 in (2)
  • 0.161 in (1)
  • 0.162 in (1)
  • 0.164 in (1)
  • 0.167 in (2)
  • 0.17 in (1)
  • 0.173 in (1)
  • 0.175 in (1)
  • 0.177 in (1)
  • 0.181 in (1)
  • 0.186 in (1)
  • 0.191 in (1)
  • 0.195 in (1)
  • 0.2 in (1)
  • 0.206 in (1)
  • 0.21 in (1)
  • 0.214 in (1)
  • 0.219 in (1)
  • 0.223 in (1)
  • 0.227 in (1)
  • 0.232 in (1)
  • 0.236 in (1)
  • 0.238 in (1)
  • 0.242 in (1)
  • 0.246 in (1)
  • 0.251 in (1)
  • 0.256 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 1.102 in (1)
  • 1.143 in (2)
  • 1.181 in (1)
  • 1.22 in (1)
  • 1.26 in (1)
  • 1.379 in (2)
  • 1.417 in (2)
  • 1.457 in (2)
  • 1.496 in (2)
  • 1.614 in (2)
  • 1.655 in (1)
  • 1.732 in (3)
  • 1.772 in (3)
  • 1.811 in (3)
  • 1.85 in (2)
  • 1.891 in (2)
  • 1.929 in (2)
  • 1.969 in (4)
  • 2.008 in (2)
  • 2.087 in (2)
  • 2.126 in (4)
  • 2.205 in (2)
  • 2.244 in (1)
  • 2.283 in (1)
  • 2.323 in (1)
  • 2.362 in (1)
  • 2.402 in (3)
  • 2.441 in (3)
  • 2.48 in (1)
  • 2.52 in (3)
  • 2.559 in (4)
  • 2.638 in (3)
  • 2.677 in (4)
  • 2.717 in (1)
  • 2.757 in (3)
  • 2.795 in (1)
  • 2.874 in (1)
  • 2.914 in (3)
  • 2.992 in (3)
  • 3.031 in (1)
  • 3.071 in (2)
  • 3.11 in (1)
  • 3.189 in (2)
  • 3.228 in (1)
  • 3.269 in (1)
  • 3.307 in (2)
  • 3.346 in (1)
  • 3.386 in (1)
  • 3.426 in (3)
  • 3.465 in (1)
  • 3.543 in (2)
  • 3.661 in (1)
  • 3.701 in (1)
  • 3.781 in (2)
  • 3.858 in (1)
  • 3.898 in (1)
  • 3.938 in (1)
  • 3.976 in (2)
  • 4.094 in (1)
  • 4.134 in (1)
  • 4.213 in (1)
  • 4.291 in (1)
  • 4.331 in (1)
  • 4.449 in (2)
  • 4.529 in (1)
  • 4.606 in (2)
  • 4.686 in (1)
  • 4.724 in (1)
  • 4.803 in (1)
  • 4.882 in (2)
  • 4.961 in (1)
  • 5.039 in (2)
  • 5.118 in (2)
  • 5.197 in (2)
  • 5.276 in (1)
  • 5.354 in (2)
  • 5.433 in (2)
  • 5.472 in (1)
  • 5.513 in (1)
  • 5.63 in (1)
  • 5.787 in (1)
  • 5.945 in (1)
  • 6.102 in (1)
  • 6.22 in (1)
  • 6.339 in (1)
  • 6.457 in (1)
  • 6.614 in (1)
  • 6.732 in (1)
  • 6.851 in (1)
  • 6.969 in (1)
  • 7.087 in (1)
  • 7.165 in (1)
  • 7.205 in (1)
  • 7.323 in (1)
  • 7.441 in (1)
  • 7.559 in (1)
  • 7.678 in (1)
Reach Min to Reach Max
Reach
Reach
  • 28.0 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (1)
  • 31.0 mm (1)
  • 32.0 mm (1)
  • 35.0 mm (2)
  • 36.0 mm (2)
  • 37.0 mm (2)
  • 38.0 mm (2)
  • 41.0 mm (2)
  • 42.0 mm (1)
  • 44.0 mm (3)
  • 45.0 mm (3)
  • 46.0 mm (3)
  • 47.0 mm (2)
  • 48.0 mm (2)
  • 49.0 mm (2)
  • 50.0 mm (4)
  • 51.0 mm (2)
  • 53.0 mm (2)
  • 54.0 mm (4)
  • 56.0 mm (2)
  • 57.0 mm (1)
  • 58.0 mm (1)
  • 59.0 mm (1)
  • 60.0 mm (1)
  • 61.0 mm (3)
  • 62.0 mm (3)
  • 63.0 mm (1)
  • 64.0 mm (3)
  • 65.0 mm (4)
  • 67.0 mm (3)
  • 68.0 mm (4)
  • 69.0 mm (1)
  • 70.0 mm (3)
  • 71.0 mm (1)
  • 73.0 mm (1)
  • 74.0 mm (3)
  • 76.0 mm (3)
  • 77.0 mm (1)
  • 78.0 mm (2)
  • 79.0 mm (1)
  • 81.0 mm (2)
  • 82.0 mm (1)
  • 83.0 mm (1)
  • 84.0 mm (2)
  • 85.0 mm (1)
  • 86.0 mm (1)
  • 87.0 mm (3)
  • 88.0 mm (1)
  • 90.0 mm (2)
  • 93.0 mm (1)
  • 94.0 mm (1)
  • 96.0 mm (2)
  • 98.0 mm (1)
  • 99.0 mm (1)
  • 100.0 mm (1)
  • 101.0 mm (2)
  • 104.0 mm (1)
  • 105.0 mm (1)
  • 107.0 mm (1)
  • 109.0 mm (1)
  • 110.0 mm (1)
  • 113.0 mm (2)
  • 115.0 mm (1)
  • 117.0 mm (2)
  • 119.0 mm (1)
  • 120.0 mm (1)
  • 122.0 mm (1)
  • 124.0 mm (2)
  • 126.0 mm (1)
  • 128.0 mm (2)
  • 130.0 mm (2)
  • 132.0 mm (2)
  • 134.0 mm (1)
  • 136.0 mm (2)
  • 138.0 mm (2)
  • 139.0 mm (1)
  • 140.0 mm (1)
  • 143.0 mm (1)
  • 147.0 mm (1)
  • 151.0 mm (1)
  • 155.0 mm (1)
  • 158.0 mm (1)
  • 161.0 mm (1)
  • 164.0 mm (1)
  • 168.0 mm (1)
  • 171.0 mm (1)
  • 174.0 mm (1)
  • 177.0 mm (1)
  • 180.0 mm (1)
  • 182.0 mm (1)
  • 183.0 mm (1)
  • 186.0 mm (1)
  • 189.0 mm (1)
  • 192.0 mm (1)
  • 195.0 mm (1)
Reach Min to Reach Max
Connection Style
Connection Style
  • Whistle Drive 2 (117)
  • Whistle Notch 2 (10)
  • Whistle Notch 2 CylindricalEnd (30)
Number of Flutes
Number of Flutes
  • 2 (157)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (118)
  • 1.0 (89)
  • 2.0 (87)
  • 3.0 (102)
  • 4.0 (102)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (50)
  • 0.031 in (48)
  • 0.033 in (2)
  • 0.039 in (6)
  • 0.047 in (12)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (50)
  • 0.8 mm (48)
  • 0.851 mm (2)
  • 1.0 mm (6)
  • 1.201 mm (12)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (118)
Corner Chamfer Min to Corner Chamfer Max