successfully added to cart
View Cart

Notifications

Mark all as read

Modulare Bohrer

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2760)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2758)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (2758)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (2758)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2758)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2562)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2555)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (2526)
  • M Stainless Steel (2127)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2127)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2127)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1862)
  • K Cast Iron (2645)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (2645)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (2645)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (2645)
  • N Non-Ferrous Materials (1595)
    • N1
      Wrought Aluminum
      (1594)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1594)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1594)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1574)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1351)
    • N6
      Carbon, Graphite Composites, CFRP
      (1342)
    • N7
      MMC's
      (1147)
  • S High-Temp Alloys (1415)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1261)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1261)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1261)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1415)
  • H Hardened Materials (220)
    • H1
      Hardened Materials 44-48 HRC
      (220)
    • H2
      Hardened Materials 48-55 HRC
      (110)
    • H3
      Hardened Materials 56-60 HRC
      (110)
    • H4
      Hardened Materials >60 HRC
      (110)
  • C CFRP Materials (162)
    • C1
      CFRP, CFRP / CFRP
      (63)
    • C2
      CFRP / Aluminium CFRP / Non-Ferrous
      (157)
    • C3
      CFRP / Titanium CFRP / High Temp
      (157)
    • C4
      CFRP / Stainless Steel
      (157)
Select First Choice
  • BR (142)
  • CN (630)
  • DE (679)
  • GB (434)
  • IN (244)
  • SG (315)
  • US (715)
Applications
Applications
  • Chain Drilling Chain Drilling (6)
  • Convex Drilling Convex Drilling (6)
  • Corner Drilling 45° Corner Drilling 45° (6)
  • Countersinking Countersinking (42)
  • Cross Hole Drilling Cross Hole Drilling (6)
  • Drilling Drilling (1412)
  • Flat Bottom Drilling Flat Bottom Drilling (6)
  • Half Cylindrical Drilling Half Cylindrical Drilling (6)
  • Inclined Entry Drilling Inclined Entry Drilling (820)
  • Inclined Exit Drilling Inclined Exit Drilling (820)
  • Stacked Plates Drilling Stacked Plates Drilling (1210)
  • X-Offset Drilling X-Offset Drilling (6)
Cutting Diameter
Cutting Diameter
  • 0.375 in (36)
  • 0.394 in (34)
  • 0.414 in (61)
  • 0.437 in (34)
  • 0.492 in (61)
  • 0.496 in (51)
  • 0.5 in (63)
  • 0.504 in (55)
  • 0.512 in (71)
  • 0.516 in (59)
  • 0.52 in (58)
  • 0.531 in (93)
  • 0.535 in (45)
  • 0.539 in (43)
  • 0.543 in (48)
  • 0.547 in (48)
  • 0.551 in (64)
  • 0.555 in (54)
  • 0.559 in (50)
  • 0.564 in (58)
  • 0.568 in (42)
  • 0.572 in (54)
  • 0.576 in (45)
  • 0.578 in (47)
  • 0.583 in (46)
  • 0.591 in (69)
  • 0.594 in (55)
  • 0.602 in (51)
  • 0.609 in (48)
  • 0.61 in (62)
  • 0.614 in (44)
  • 0.618 in (43)
  • 0.622 in (45)
  • 0.625 in (46)
  • 0.63 in (64)
  • 0.634 in (63)
  • 0.636 in (39)
  • 0.638 in (58)
  • 0.641 in (59)
  • 0.65 in (63)
  • 0.654 in (50)
  • 0.656 in (52)
  • 0.669 in (66)
  • 0.672 in (54)
  • 0.687 in (40)
  • 0.69 in (64)
  • 0.694 in (48)
  • 0.698 in (49)
  • 0.702 in (48)
  • 0.704 in (48)
  • 0.705 in (44)
  • 0.709 in (52)
  • 0.719 in (42)
  • 0.72 in (35)
  • 0.724 in (34)
  • 0.728 in (53)
  • 0.732 in (40)
  • 0.734 in (43)
  • 0.74 in (36)
  • 0.744 in (34)
  • 0.748 in (74)
  • 0.75 in (67)
  • 0.756 in (58)
  • 0.757 in (58)
  • 0.758 in (58)
  • 0.759 in (60)
  • 0.762 in (56)
  • 0.766 in (62)
  • 0.768 in (74)
  • 0.776 in (46)
  • 0.781 in (49)
  • 0.787 in (46)
  • 0.797 in (39)
  • 0.807 in (55)
  • 0.814 in (46)
  • 0.816 in (38)
  • 0.828 in (74)
  • 0.832 in (35)
  • 0.846 in (48)
  • 0.866 in (43)
  • 0.87 in (41)
  • 0.875 in (48)
  • 0.884 in (43)
  • 0.886 in (53)
  • 0.906 in (43)
  • 0.925 in (48)
  • 0.946 in (41)
  • 0.965 in (37)
  • 0.984 in (66)
  • 0.987 in (45)
  • 0.994 in (39)
  • 0.996 in (39)
  • 1.0 in (53)
  • 1.004 in (53)
  • 1.006 in (38)
  • 1.008 in (38)
  • 1.01 in (36)
  • 1.012 in (45)
  • 1.016 in (43)
  • 1.024 in (43)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 9.525 mm (36)
  • 10.0 mm (34)
  • 10.5 mm (61)
  • 11.101 mm (34)
  • 12.5 mm (61)
  • 12.601 mm (51)
  • 12.701 mm (63)
  • 12.8 mm (55)
  • 13.0 mm (71)
  • 13.101 mm (59)
  • 13.201 mm (58)
  • 13.5 mm (93)
  • 13.601 mm (45)
  • 13.701 mm (43)
  • 13.8 mm (48)
  • 13.9 mm (48)
  • 14.0 mm (64)
  • 14.101 mm (54)
  • 14.201 mm (50)
  • 14.3 mm (58)
  • 14.4 mm (42)
  • 14.5 mm (54)
  • 14.601 mm (45)
  • 14.675 mm (47)
  • 14.8 mm (46)
  • 15.0 mm (69)
  • 15.076 mm (55)
  • 15.3 mm (51)
  • 15.476 mm (48)
  • 15.5 mm (62)
  • 15.601 mm (44)
  • 15.701 mm (43)
  • 15.8 mm (45)
  • 15.875 mm (46)
  • 16.0 mm (64)
  • 16.1 mm (63)
  • 16.151 mm (39)
  • 16.2 mm (58)
  • 16.276 mm (59)
  • 16.5 mm (63)
  • 16.6 mm (50)
  • 16.675 mm (52)
  • 17.0 mm (66)
  • 17.075 mm (54)
  • 17.45 mm (40)
  • 17.5 mm (64)
  • 17.6 mm (48)
  • 17.7 mm (49)
  • 17.8 mm (48)
  • 17.85 mm (48)
  • 17.901 mm (44)
  • 18.0 mm (52)
  • 18.25 mm (42)
  • 18.3 mm (35)
  • 18.401 mm (34)
  • 18.5 mm (53)
  • 18.6 mm (40)
  • 18.651 mm (43)
  • 18.8 mm (36)
  • 18.901 mm (34)
  • 19.0 mm (74)
  • 19.05 mm (67)
  • 19.201 mm (58)
  • 19.225 mm (58)
  • 19.25 mm (58)
  • 19.276 mm (60)
  • 19.35 mm (56)
  • 19.451 mm (62)
  • 19.5 mm (74)
  • 19.701 mm (46)
  • 19.85 mm (49)
  • 20.0 mm (46)
  • 20.25 mm (39)
  • 20.5 mm (55)
  • 20.651 mm (46)
  • 20.701 mm (38)
  • 21.0 mm (74)
  • 21.1 mm (35)
  • 21.5 mm (48)
  • 22.0 mm (43)
  • 22.1 mm (41)
  • 22.225 mm (48)
  • 22.451 mm (43)
  • 22.5 mm (53)
  • 23.0 mm (43)
  • 23.5 mm (48)
  • 24.0 mm (41)
  • 24.5 mm (37)
  • 25.0 mm (66)
  • 25.076 mm (45)
  • 25.25 mm (39)
  • 25.3 mm (39)
  • 25.401 mm (53)
  • 25.5 mm (53)
  • 25.55 mm (38)
  • 25.6 mm (38)
  • 25.651 mm (36)
  • 25.675 mm (44)
  • 25.8 mm (43)
  • 26.0 mm (43)
Cutting Diameter Min to Cutting Diameter Max
Cutting Condition
Cutting Condition
  • Interrupted (72)
  • Stable (79)
  • Unstable (74)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 16.0 mm (3)
  • 18.0 mm (4)
  • 19.0 mm (3)
  • 20.0 mm (22)
  • 21.0 mm (4)
  • 22.0 mm (10)
  • 23.0 mm (3)
  • 24.0 mm (6)
  • 25.0 mm (37)
  • 25.5 mm (3)
  • 26.0 mm (7)
  • 27.0 mm (8)
  • 28.5 mm (3)
  • 29.0 mm (5)
  • 30.0 mm (41)
  • 31.5 mm (5)
  • 32.0 mm (9)
  • 33.0 mm (11)
  • 34.5 mm (4)
  • 35.0 mm (24)
  • 36.0 mm (21)
  • 37.5 mm (3)
  • 38.0 mm (7)
  • 39.0 mm (8)
  • 40.0 mm (23)
  • 40.5 mm (3)
  • 41.0 mm (4)
  • 42.0 mm (11)
  • 43.0 mm (4)
  • 44.0 mm (4)
  • 45.0 mm (24)
  • 48.0 mm (18)
  • 50.0 mm (20)
  • 51.0 mm (7)
  • 53.0 mm (6)
  • 54.0 mm (12)
  • 55.0 mm (7)
  • 57.0 mm (7)
  • 58.0 mm (4)
  • 59.95 mm (6)
  • 60.0 mm (22)
  • 63.0 mm (9)
  • 65.0 mm (7)
  • 66.0 mm (10)
  • 68.0 mm (10)
  • 69.0 mm (4)
  • 70.0 mm (12)
  • 72.0 mm (17)
  • 73.0 mm (4)
  • 75.0 mm (11)
  • 76.0 mm (7)
  • 78.0 mm (10)
  • 80.0 mm (22)
  • 84.0 mm (14)
  • 85.0 mm (7)
  • 88.0 mm (7)
  • 89.926 mm (6)
  • 90.0 mm (20)
  • 92.0 mm (7)
  • 95.0 mm (9)
  • 96.0 mm (17)
  • 98.0 mm (4)
  • 99.0 mm (5)
  • 100.0 mm (25)
  • 102.0 mm (5)
  • 104.0 mm (7)
  • 105.0 mm (9)
  • 108.0 mm (13)
  • 110.0 mm (11)
  • 111.0 mm (5)
  • 112.0 mm (14)
  • 114.0 mm (4)
  • 115.0 mm (4)
  • 116.0 mm (8)
  • 117.0 mm (4)
  • 120.0 mm (25)
  • 125.0 mm (4)
  • 126.0 mm (7)
  • 128.0 mm (8)
  • 130.0 mm (18)
  • 135.0 mm (4)
  • 136.0 mm (8)
  • 140.0 mm (18)
  • 144.0 mm (8)
  • 150.0 mm (13)
  • 152.0 mm (5)
  • 154.0 mm (6)
  • 160.0 mm (19)
  • 165.0 mm (4)
  • 168.0 mm (14)
  • 176.0 mm (4)
  • 180.0 mm (5)
  • 182.0 mm (8)
  • 185.0 mm (5)
  • 190.5 mm (5)
  • 196.0 mm (7)
  • 200.0 mm (5)
  • 210.0 mm (7)
  • 224.0 mm (8)
  • 254.0 mm (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.63 in (3)
  • 0.709 in (4)
  • 0.748 in (3)
  • 0.787 in (22)
  • 0.828 in (4)
  • 0.866 in (10)
  • 0.906 in (3)
  • 0.946 in (6)
  • 0.984 in (37)
  • 1.004 in (3)
  • 1.024 in (7)
  • 1.063 in (8)
  • 1.122 in (3)
  • 1.143 in (5)
  • 1.181 in (41)
  • 1.24 in (5)
  • 1.26 in (9)
  • 1.299 in (11)
  • 1.358 in (4)
  • 1.379 in (24)
  • 1.417 in (21)
  • 1.496 in (7)
  • 1.536 in (8)
  • 1.575 in (23)
  • 1.594 in (5)
  • 1.614 in (4)
  • 1.655 in (11)
  • 1.693 in (4)
  • 1.732 in (4)
  • 1.772 in (24)
  • 1.891 in (18)
  • 1.969 in (20)
  • 2.008 in (7)
  • 2.087 in (6)
  • 2.126 in (12)
  • 2.165 in (7)
  • 2.244 in (7)
  • 2.283 in (4)
  • 2.36 in (6)
  • 2.362 in (22)
  • 2.48 in (9)
  • 2.559 in (7)
  • 2.598 in (10)
  • 2.657 in (5)
  • 2.677 in (10)
  • 2.717 in (4)
  • 2.757 in (12)
  • 2.835 in (17)
  • 2.874 in (4)
  • 2.953 in (11)
  • 2.992 in (7)
  • 3.071 in (12)
  • 3.15 in (22)
  • 3.307 in (14)
  • 3.346 in (7)
  • 3.465 in (7)
  • 3.54 in (6)
  • 3.543 in (20)
  • 3.622 in (7)
  • 3.74 in (9)
  • 3.781 in (17)
  • 3.858 in (4)
  • 3.898 in (5)
  • 3.938 in (27)
  • 4.016 in (5)
  • 4.094 in (7)
  • 4.134 in (9)
  • 4.252 in (13)
  • 4.331 in (11)
  • 4.37 in (5)
  • 4.409 in (14)
  • 4.488 in (4)
  • 4.529 in (4)
  • 4.567 in (8)
  • 4.606 in (4)
  • 4.724 in (25)
  • 4.921 in (4)
  • 4.961 in (7)
  • 5.039 in (8)
  • 5.118 in (18)
  • 5.315 in (4)
  • 5.354 in (8)
  • 5.513 in (18)
  • 5.67 in (8)
  • 5.906 in (13)
  • 5.984 in (5)
  • 6.063 in (6)
  • 6.299 in (19)
  • 6.496 in (4)
  • 6.614 in (14)
  • 6.929 in (4)
  • 7.087 in (5)
  • 7.165 in (8)
  • 7.283 in (5)
  • 7.5 in (5)
  • 7.718 in (7)
  • 7.875 in (6)
  • 8.268 in (7)
  • 8.819 in (8)
  • 10.0 in (4)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.787 in (17)
  • 0.866 in (7)
  • 0.917 in (9)
  • 0.935 in (8)
  • 0.944 in (7)
  • 0.984 in (15)
  • 1.101 in (6)
  • 1.114 in (7)
  • 1.147 in (3)
  • 1.181 in (18)
  • 1.22 in (3)
  • 1.272 in (9)
  • 1.298 in (8)
  • 1.379 in (3)
  • 1.417 in (12)
  • 1.465 in (3)
  • 1.469 in (11)
  • 1.491 in (9)
  • 1.518 in (9)
  • 1.614 in (3)
  • 1.622 in (3)
  • 1.666 in (13)
  • 1.693 in (3)
  • 1.697 in (3)
  • 1.703 in (7)
  • 1.863 in (3)
  • 1.885 in (9)
  • 1.911 in (5)
  • 1.929 in (4)
  • 2.075 in (3)
  • 2.126 in (4)
  • 2.185 in (3)
  • 2.205 in (4)
  • 2.217 in (3)
  • 2.236 in (4)
  • 2.283 in (6)
  • 2.323 in (6)
  • 2.331 in (3)
  • 2.41 in (5)
  • 2.441 in (3)
  • 2.524 in (4)
  • 2.592 in (3)
  • 2.598 in (4)
  • 2.677 in (7)
  • 2.701 in (3)
  • 2.717 in (4)
  • 2.781 in (3)
  • 2.953 in (8)
  • 2.967 in (3)
  • 3.011 in (3)
  • 3.035 in (4)
  • 3.092 in (3)
  • 3.13 in (4)
  • 3.269 in (7)
  • 3.426 in (7)
  • 3.511 in (8)
  • 3.583 in (4)
  • 3.622 in (6)
  • 3.785 in (5)
  • 3.938 in (11)
  • 3.96 in (5)
  • 4.291 in (6)
  • 4.34 in (4)
  • 4.37 in (4)
  • 4.529 in (5)
  • 4.606 in (5)
  • 4.843 in (4)
  • 4.921 in (6)
  • 5.09 in (5)
  • 5.093 in (5)
  • 5.197 in (4)
  • 5.218 in (4)
  • 5.315 in (4)
  • 5.343 in (6)
  • 5.787 in (5)
  • 5.827 in (10)
  • 5.843 in (6)
  • 5.851 in (4)
  • 6.024 in (5)
  • 6.142 in (4)
  • 6.339 in (5)
  • 6.343 in (4)
  • 6.417 in (5)
  • 6.718 in (4)
  • 6.811 in (4)
  • 6.843 in (4)
  • 7.087 in (4)
  • 7.283 in (4)
  • 7.718 in (9)
  • 7.835 in (4)
  • 7.843 in (4)
  • 8.169 in (5)
  • 8.387 in (7)
  • 8.467 in (4)
  • 9.016 in (4)
  • 9.169 in (5)
  • 9.59 in (5)
  • 9.646 in (4)
  • 10.342 in (4)
  • 10.355 in (4)
Reach Min to Reach Max