successfully added to cart
View Cart

HP-Tiefloch-Vollhartmetallbohrer

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Convex Drilling Convex Drilling (134)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (1)
  • Cross Hole Drilling Cross Hole Drilling (870)
  • Drilling Drilling (870)
  • Inclined Exit Drilling Inclined Exit Drilling (870)
  • Stacked Plates Drilling Stacked Plates Drilling (870)
Workpiece Material
  • P Steel (516)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (349)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (349)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (349)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (349)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (349)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (516)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (516)
  • M Stainless Steel (516)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (516)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (516)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (516)
  • K Cast Iron (349)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (349)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (349)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (349)
  • N Non-Ferrous Materials (176)
    • N1
      Wrought Aluminum
      (176)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (176)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (176)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (176)
  • S High-Temp Alloys (167)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (167)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (167)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (167)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (167)
Cutting Diameter
  • 2.383 (8)
  • 2.4 (5)
  • 2.41 (1)
  • 2.439 (3)
  • 2.489 (3)
  • 2.5 (15)
  • 2.578 (1)
  • 2.6 (5)
  • 2.642 (2)
  • 2.705 (1)
  • 2.779 (5)
  • 2.8 (6)
  • 2.82 (3)
  • 2.87 (3)
  • 2.9 (3)
  • 2.947 (4)
  • 3.0 (18)
  • 3.175 (19)
  • 3.2 (2)
  • 3.264 (1)
  • 3.3 (3)
  • 3.4 (1)
  • 3.5 (18)
  • 3.571 (3)
  • 3.6 (2)
  • 3.7 (2)
  • 3.8 (1)
  • 3.85 (1)
  • 3.97 (14)
  • 4.0 (17)
  • 4.1 (1)
  • 4.2 (4)
  • 4.3 (3)
  • 4.5 (20)
  • 4.55 (1)
  • 4.6 (1)
  • 4.62 (2)
  • 4.623 (2)
  • 4.7 (1)
  • 4.763 (12)
  • 4.8 (4)
  • 5.0 (17)
  • 5.06 (1)
  • 5.1 (3)
  • 5.2 (2)
  • 5.25 (2)
  • 5.26 (2)
  • 5.3 (1)
  • 5.41 (5)
  • 5.5 (18)
  • 5.558 (11)
  • 5.6 (1)
  • 5.7 (2)
  • 5.8 (7)
  • 5.9 (1)
  • 6.0 (17)
  • 6.1 (1)
  • 6.2 (7)
  • 6.35 (16)
  • 6.4 (2)
  • 6.5 (17)
  • 6.528 (5)
  • 6.6 (1)
  • 6.746 (14)
  • 6.8 (7)
  • 6.909 (5)
  • 7.0 (17)
  • 7.145 (13)
  • 7.2 (1)
  • 7.5 (12)
  • 7.54 (2)
  • 7.541 (3)
  • 7.7 (2)
  • 7.8 (1)
  • 7.9375 (5)
  • 7.938 (8)
  • 8.0 (17)
  • 8.1 (1)
  • 8.2 (2)
  • 8.333 (2)
  • 8.334 (5)
  • 8.43 (2)
  • 8.433 (3)
  • 8.5 (18)
  • 8.6 (1)
  • 8.7 (2)
  • 8.73 (2)
  • 8.733 (15)
  • 8.8 (2)
  • 9.0 (16)
  • 9.1 (7)
  • 9.129 (2)
  • 9.2 (1)
  • 9.5 (4)
  • 9.525 (16)
  • 9.75 (5)
  • 9.8 (1)
  • 9.921 (1)
  • 10.0 (17)
  • 10.2 (16)
  • 10.3 (1)
  • 10.32 (6)
  • 10.4 (1)
  • 10.5 (16)
  • 10.7156 (1)
  • 10.716 (4)
  • 10.72 (7)
  • 10.8 (2)
  • 11.0 (20)
  • 11.113 (3)
  • 11.2 (1)
  • 11.5 (16)
  • 11.8 (3)
  • 12.0 (17)
  • 12.1 (1)
  • 12.2 (1)
  • 12.304 (1)
  • 12.5 (13)
  • 12.7 (16)
  • 13.0 (15)
  • 13.1 (7)
  • 13.5 (14)
  • 13.8 (1)
  • 14.0 (14)
  • 14.1 (1)
  • 14.288 (4)
  • 14.29 (6)
  • 14.5 (12)
  • 14.6 (1)
  • 14.684 (1)
  • 15.0 (16)
  • 15.2 (1)
  • 15.3 (1)
  • 15.5 (7)
  • 15.87 (4)
  • 15.875 (3)
  • 16.0 (12)
  • 16.5 (1)
  • 17.0 (1)
  • 17.1 (1)
  • 17.463 (1)
  • 17.5 (1)
  • 17.6 (1)
  • 18.0 (1)
  • 18.5 (1)
  • 18.6 (1)
  • 19.0 (1)
  • 19.05 (1)
  • 19.5 (1)
  • 20.0 (1)
to
Cutting Diameter
  • 0.0938 (8)
  • 0.0945 (5)
  • 0.0949 (1)
  • 0.096 (3)
  • 0.098 (3)
  • 0.0984 (15)
  • 0.1015 (1)
  • 0.1024 (5)
  • 0.104 (2)
  • 0.1065 (1)
  • 0.1094 (5)
  • 0.1102 (6)
  • 0.111 (3)
  • 0.113 (3)
  • 0.1142 (3)
  • 0.116 (4)
  • 0.1181 (18)
  • 0.125 (19)
  • 0.126 (2)
  • 0.1285 (1)
  • 0.1299 (3)
  • 0.1339 (1)
  • 0.1378 (18)
  • 0.1406 (3)
  • 0.1417 (2)
  • 0.1457 (2)
  • 0.1496 (1)
  • 0.1516 (1)
  • 0.1563 (14)
  • 0.1575 (17)
  • 0.1614 (1)
  • 0.1654 (4)
  • 0.1693 (3)
  • 0.1772 (20)
  • 0.1791 (1)
  • 0.1811 (1)
  • 0.1819 (2)
  • 0.182 (2)
  • 0.185 (1)
  • 0.1875 (12)
  • 0.189 (4)
  • 0.1969 (17)
  • 0.1992 (1)
  • 0.2008 (3)
  • 0.2047 (2)
  • 0.2067 (2)
  • 0.2071 (2)
  • 0.2087 (1)
  • 0.213 (5)
  • 0.2165 (18)
  • 0.2188 (11)
  • 0.2205 (1)
  • 0.2244 (2)
  • 0.2283 (7)
  • 0.2323 (1)
  • 0.2362 (17)
  • 0.2402 (1)
  • 0.2441 (7)
  • 0.25 (16)
  • 0.252 (2)
  • 0.2559 (17)
  • 0.257 (5)
  • 0.2598 (1)
  • 0.2656 (14)
  • 0.2677 (7)
  • 0.272 (5)
  • 0.2756 (17)
  • 0.2813 (13)
  • 0.2835 (1)
  • 0.2953 (12)
  • 0.2969 (5)
  • 0.3031 (2)
  • 0.3071 (1)
  • 0.3125 (13)
  • 0.315 (17)
  • 0.3189 (1)
  • 0.3228 (2)
  • 0.3281 (7)
  • 0.3319 (2)
  • 0.332 (3)
  • 0.3346 (18)
  • 0.3386 (1)
  • 0.3425 (2)
  • 0.3437 (2)
  • 0.3438 (15)
  • 0.3465 (2)
  • 0.3543 (16)
  • 0.3583 (7)
  • 0.3594 (2)
  • 0.3622 (1)
  • 0.374 (4)
  • 0.375 (16)
  • 0.3839 (5)
  • 0.3858 (1)
  • 0.3906 (1)
  • 0.3937 (17)
  • 0.4016 (16)
  • 0.4055 (1)
  • 0.4063 (6)
  • 0.4094 (1)
  • 0.4134 (16)
  • 0.4219 (5)
  • 0.422 (7)
  • 0.4252 (2)
  • 0.4331 (20)
  • 0.4375 (3)
  • 0.4409 (1)
  • 0.4528 (16)
  • 0.4646 (3)
  • 0.4724 (17)
  • 0.4764 (1)
  • 0.4803 (1)
  • 0.4844 (1)
  • 0.4921 (13)
  • 0.5 (16)
  • 0.5118 (15)
  • 0.5157 (7)
  • 0.5315 (14)
  • 0.5433 (1)
  • 0.5512 (14)
  • 0.5551 (1)
  • 0.5625 (4)
  • 0.5626 (6)
  • 0.5709 (12)
  • 0.5748 (1)
  • 0.5781 (1)
  • 0.5906 (16)
  • 0.5984 (1)
  • 0.6024 (1)
  • 0.6102 (7)
  • 0.6248 (4)
  • 0.625 (3)
  • 0.6299 (12)
  • 0.6496 (1)
  • 0.6693 (1)
  • 0.6732 (1)
  • 0.6875 (1)
  • 0.689 (1)
  • 0.6929 (1)
  • 0.7087 (1)
  • 0.7283 (1)
  • 0.7323 (1)
  • 0.748 (1)
  • 0.75 (1)
  • 0.7677 (1)
  • 0.7874 (1)
to
Maximum Hole Depth [L4]
  • 1.378 (3)
  • 1.4173 (2)
  • 1.73 (1)
  • 1.7323 (16)
  • 1.77 (1)
  • 1.7717 (14)
  • 2.1654 (2)
  • 2.2047 (15)
  • 2.2441 (3)
  • 2.2835 (6)
  • 2.32 (1)
  • 2.3228 (5)
  • 2.36 (4)
  • 2.3622 (8)
  • 2.6378 (1)
  • 2.64 (1)
  • 2.7165 (3)
  • 2.72 (1)
  • 2.7559 (4)
  • 2.7953 (5)
  • 2.8346 (3)
  • 2.87 (3)
  • 2.91 (4)
  • 2.9134 (5)
  • 2.95 (6)
  • 2.9528 (11)
  • 3.03 (1)
  • 3.0315 (3)
  • 3.11 (2)
  • 3.1102 (5)
  • 3.1496 (4)
  • 3.15 (2)
  • 3.189 (2)
  • 3.19 (1)
  • 3.2283 (2)
  • 3.2677 (8)
  • 3.3071 (4)
  • 3.4252 (3)
  • 3.46 (1)
  • 3.4646 (2)
  • 3.5 (4)
  • 3.5039 (9)
  • 3.54 (7)
  • 3.5433 (3)
  • 3.7 (1)
  • 3.7008 (4)
  • 3.7402 (3)
  • 3.7795 (3)
  • 3.8189 (3)
  • 3.82 (1)
  • 3.8583 (2)
  • 3.8976 (3)
  • 3.9 (1)
  • 3.937 (4)
  • 3.94 (3)
  • 4.0551 (2)
  • 4.06 (1)
  • 4.09 (2)
  • 4.0945 (11)
  • 4.13 (1)
  • 4.1339 (4)
  • 4.17 (2)
  • 4.1732 (5)
  • 4.4094 (2)
  • 4.41 (1)
  • 4.4882 (1)
  • 4.5276 (2)
  • 4.5669 (4)
  • 4.6063 (10)
  • 4.61 (2)
  • 4.6457 (11)
  • 4.65 (1)
  • 4.685 (11)
  • 4.69 (3)
  • 4.72 (4)
  • 4.7244 (13)
  • 4.92 (2)
  • 4.9213 (2)
  • 5.2362 (1)
  • 5.2756 (14)
  • 5.28 (2)
  • 5.31 (1)
  • 5.315 (2)
  • 5.35 (1)
  • 5.3543 (3)
  • 5.3937 (8)
  • 5.43 (1)
  • 5.4331 (6)
  • 5.4724 (3)
  • 5.51 (1)
  • 5.5118 (3)
  • 5.5512 (5)
  • 5.59 (2)
  • 5.5906 (6)
  • 5.6299 (2)
  • 5.6693 (4)
  • 5.67 (1)
  • 5.748 (1)
  • 5.75 (1)
  • 5.7874 (4)
  • 5.8268 (3)
  • 5.8661 (10)
  • 5.87 (1)
  • 5.9055 (7)
  • 5.91 (3)
  • 6.063 (5)
  • 6.18 (1)
  • 6.1811 (4)
  • 6.2598 (6)
  • 6.2992 (5)
  • 6.3 (1)
  • 6.4173 (3)
  • 6.4567 (5)
  • 6.46 (3)
  • 6.4961 (8)
  • 6.5 (2)
  • 6.5354 (3)
  • 6.57 (1)
  • 6.5748 (2)
  • 6.6142 (2)
  • 6.6535 (4)
  • 6.73 (2)
  • 6.7323 (1)
  • 6.77 (1)
  • 6.7717 (2)
  • 6.81 (1)
  • 6.8898 (4)
  • 6.89 (3)
  • 6.9291 (2)
  • 6.9685 (3)
  • 7.0079 (6)
  • 7.01 (2)
  • 7.0472 (2)
  • 7.05 (2)
  • 7.0866 (8)
  • 7.09 (2)
  • 7.3622 (3)
  • 7.4016 (2)
  • 7.4409 (2)
  • 7.4803 (3)
  • 7.5197 (1)
  • 7.5591 (2)
  • 7.6378 (9)
  • 7.6772 (5)
  • 7.68 (2)
  • 7.7559 (4)
  • 7.7953 (3)
  • 7.83 (1)
  • 7.8346 (2)
  • 7.87 (2)
  • 7.874 (8)
  • 7.95 (1)
  • 7.9528 (2)
  • 8.07 (1)
  • 8.0709 (1)
  • 8.1102 (2)
  • 8.189 (1)
  • 8.2283 (3)
  • 8.2677 (4)
  • 8.27 (2)
  • 8.3858 (1)
  • 8.4252 (5)
  • 8.46 (1)
  • 8.4646 (3)
  • 8.5039 (1)
  • 8.54 (1)
  • 8.5433 (3)
  • 8.62 (2)
  • 8.622 (6)
  • 8.6614 (4)
  • 8.7 (1)
  • 8.7008 (2)
  • 8.8189 (6)
  • 8.82 (1)
  • 8.8583 (5)
  • 8.86 (3)
  • 8.937 (3)
  • 8.9764 (3)
  • 9.13 (1)
  • 9.21 (1)
  • 9.252 (1)
  • 9.33 (1)
  • 9.3307 (5)
  • 9.3701 (2)
  • 9.4094 (8)
  • 9.41 (1)
  • 9.4488 (15)
  • 9.45 (3)
  • 9.6457 (1)
  • 9.65 (1)
  • 9.84 (1)
  • 9.8425 (2)
  • 10.1181 (3)
  • 10.12 (1)
  • 10.1575 (3)
  • 10.16 (1)
  • 10.1969 (2)
  • 10.2362 (3)
  • 10.24 (1)
  • 10.31 (1)
  • 10.315 (2)
  • 10.3543 (3)
  • 10.3937 (1)
  • 10.43 (1)
  • 10.4331 (4)
  • 10.5118 (3)
  • 10.59 (1)
  • 10.5906 (2)
  • 10.6299 (2)
  • 10.63 (1)
  • 10.7087 (1)
  • 10.748 (3)
  • 10.7874 (3)
  • 10.8268 (2)
  • 10.83 (2)
  • 10.9055 (3)
  • 11.0236 (6)
  • 11.22 (1)
  • 11.2205 (1)
  • 11.4961 (2)
  • 11.5 (1)
  • 11.5748 (3)
  • 11.6142 (3)
  • 11.69 (1)
  • 11.6929 (6)
  • 11.81 (2)
  • 11.811 (10)
  • 12.0866 (3)
  • 12.4409 (3)
  • 12.48 (1)
  • 12.4803 (3)
  • 12.5197 (3)
  • 12.5591 (3)
  • 12.5984 (8)
  • 12.6 (1)
  • 12.6772 (5)
  • 12.68 (2)
  • 12.7953 (2)
  • 12.8 (2)
  • 12.8346 (3)
  • 12.9134 (1)
  • 12.99 (1)
  • 12.9921 (3)
  • 13.3465 (1)
  • 13.35 (1)
  • 13.54 (2)
  • 13.5433 (2)
  • 13.6614 (3)
  • 13.7795 (2)
  • 13.78 (2)
  • 13.8583 (6)
  • 13.86 (1)
  • 14.0157 (1)
  • 14.17 (1)
  • 14.1732 (6)
  • 14.4094 (2)
  • 14.41 (1)
  • 14.5276 (2)
  • 14.53 (1)
  • 14.76 (2)
  • 14.7638 (2)
  • 15.0394 (2)
  • 15.1575 (3)
  • 15.16 (1)
  • 15.2362 (3)
  • 15.35 (1)
  • 15.3543 (2)
  • 15.748 (5)
  • 15.75 (1)
  • 16.22 (1)
  • 16.2205 (2)
  • 16.4567 (3)
  • 16.5354 (2)
  • 16.54 (1)
  • 16.6142 (3)
  • 17.3228 (3)
  • 17.7165 (2)
  • 17.72 (1)
to
Maximum Hole Depth [L4]
  • 35.0 (3)
  • 36.0 (2)
  • 44.0 (17)
  • 45.0 (15)
  • 55.0 (2)
  • 56.0 (15)
  • 57.0 (3)
  • 58.0 (6)
  • 59.0 (6)
  • 60.0 (12)
  • 67.0 (2)
  • 69.0 (4)
  • 70.0 (4)
  • 71.0 (5)
  • 72.0 (3)
  • 73.0 (3)
  • 74.0 (9)
  • 75.0 (17)
  • 77.0 (4)
  • 79.0 (7)
  • 80.0 (6)
  • 81.0 (3)
  • 82.0 (2)
  • 83.0 (8)
  • 84.0 (4)
  • 87.0 (3)
  • 88.0 (3)
  • 89.0 (13)
  • 90.0 (10)
  • 94.0 (5)
  • 95.0 (3)
  • 96.0 (3)
  • 97.0 (4)
  • 98.0 (2)
  • 99.0 (4)
  • 100.0 (7)
  • 103.0 (3)
  • 104.0 (13)
  • 105.0 (5)