Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

High-Feed-Serie

Select Filters
Filters
Filters
    • Applied Filters:
    • Clear all filters
  • X First Choice:
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (103)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (96)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (96)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (96)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (96)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (96)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (100)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (100)
  • M Stainless Steel (100)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (100)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (100)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (100)
  • K Cast Iron (77)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (77)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (77)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (71)
  • N Non-Ferrous Materials (62)
    • N1
      Wrought Aluminum
      (62)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (62)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (62)
  • S High-Temp Alloys (94)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (91)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (91)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (91)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (94)
  • H Hardened Materials (67)
    • H1
      Hardened Materials 44-48 HRC
      (67)
    • H2
      Hardened Materials 48-55 HRC
      (63)
Select First Choice
  • BR (14)
  • DE (107)
  • GB (69)
  • IN (17)
  • SG (5)
  • US (80)
Applications
Applications
  • Chamfer Milling Chamfer Milling (7)
  • Face Milling Face Milling (60)
  • ID Thread Turning ID Thread Turning (17)
  • Pocket Pocket (59)
  • Pocket Helical Pocket Helical (59)
  • Pocket Milling Pocket Milling (59)
  • Pocket Plunge Milling Pocket Plunge Milling (52)
  • Profile Milling Profile Milling (59)
  • Ramping Ramping (59)
  • Slot Milling Slot Milling (25)
  • Slot Side Slot Side (25)
Cutting Diameter
Cutting Diameter
  • 0.299 in (2)
  • 0.417 in (2)
  • 0.427 in (1)
  • 0.457 in (1)
  • 0.463 in (1)
  • 0.472 in (3)
  • 0.546 in (2)
  • 0.629 in (1)
  • 0.654 in (2)
  • 0.663 in (1)
  • 0.738 in (1)
  • 0.747 in (4)
  • 0.859 in (1)
  • 0.864 in (2)
  • 0.939 in (1)
  • 1.053 in (3)
  • 1.141 in (1)
  • 1.243 in (1)
  • 1.254 in (1)
  • 1.323 in (3)
  • 1.324 in (1)
  • 1.447 in (1)
  • 1.455 in (2)
  • 1.534 in (3)
  • 1.756 in (2)
  • 1.764 in (1)
  • 1.883 in (2)
  • 1.967 in (3)
  • 2.085 in (2)
  • 2.426 in (2)
  • 2.433 in (1)
  • 3.213 in (2)
  • 3.217 in (1)
  • 4.197 in (2)
  • 5.575 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 7.601 mm (2)
  • 10.601 mm (2)
  • 10.851 mm (1)
  • 11.601 mm (1)
  • 11.75 mm (1)
  • 11.976 mm (3)
  • 13.875 mm (2)
  • 15.976 mm (1)
  • 16.6 mm (2)
  • 16.85 mm (1)
  • 18.75 mm (1)
  • 18.975 mm (4)
  • 21.826 mm (1)
  • 21.951 mm (2)
  • 23.826 mm (1)
  • 26.75 mm (3)
  • 28.951 mm (1)
  • 31.576 mm (1)
  • 31.826 mm (1)
  • 33.6 mm (3)
  • 33.625 mm (1)
  • 36.75 mm (1)
  • 36.95 mm (2)
  • 38.95 mm (2)
  • 38.975 mm (1)
  • 44.6 mm (2)
  • 44.801 mm (1)
  • 47.801 mm (2)
  • 49.95 mm (3)
  • 52.95 mm (2)
  • 61.6 mm (2)
  • 61.801 mm (1)
  • 81.601 mm (2)
  • 81.7 mm (1)
  • 106.601 mm (2)
  • 141.6 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 16.0 mm (2)
  • 20.0 mm (2)
  • 25.0 mm (6)
  • 25.026 mm (1)
  • 32.0 mm (9)
  • 35.0 mm (3)
  • 40.0 mm (4)
  • 42.0 mm (2)
  • 50.0 mm (5)
  • 51.801 mm (4)
  • 52.0 mm (2)
  • 52.026 mm (1)
  • 63.0 mm (6)
  • 66.0 mm (4)
  • 79.801 mm (1)
  • 80.0 mm (2)
  • 100.0 mm (3)
  • 125.0 mm (2)
  • 160.0 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.63 in (2)
  • 0.787 in (2)
  • 0.984 in (6)
  • 0.985 in (1)
  • 1.26 in (9)
  • 1.379 in (3)
  • 1.575 in (4)
  • 1.655 in (2)
  • 1.969 in (5)
  • 2.039 in (4)
  • 2.047 in (2)
  • 2.048 in (1)
  • 2.48 in (6)
  • 2.598 in (4)
  • 3.142 in (1)
  • 3.15 in (2)
  • 3.938 in (3)
  • 4.921 in (2)
  • 6.299 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.9 mm (7)
  • 1.5 mm (26)
  • 2.5 mm (27)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.035 in (7)
  • 0.06 in (26)
  • 0.098 in (27)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.984 in (2)
  • 1.26 in (4)
  • 1.379 in (5)
  • 1.567 in (1)
  • 1.575 in (20)
  • 1.693 in (9)
  • 1.772 in (2)
  • 1.969 in (10)
  • 2.48 in (3)
  • 2.757 in (4)
Reach Min to Reach Max
Reach
Reach
  • 25.0 mm (2)
  • 32.0 mm (4)
  • 35.0 mm (5)
  • 39.801 mm (1)
  • 40.0 mm (20)
  • 43.0 mm (9)
  • 45.0 mm (2)
  • 50.0 mm (10)
  • 63.0 mm (3)
  • 70.0 mm (4)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 11.0 (1)
  • 15.0 (59)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (33)
  • KL Screw (1)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (15)
  • Straight-Cylindrical (9)
  • Weldon (1)
Number of Flutes
Number of Flutes
  • 10 (1)
  • 11 (2)
  • 2 (6)
  • 3 (14)
  • 4 (11)
  • 5 (10)
  • 6 (7)
  • 7 (5)
  • 8 (2)
  • 9 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (47)
  • 4.0 (60)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.031 in (29)
  • 0.047 in (12)
  • 0.06 in (6)
  • 0.787 in (27)
  • 0.798 in (26)
  • 0.8 in (60)
  • 1.0 in (7)
  • 1.194 in (53)
  • 1.2 in (53)
  • 1.5 in (27)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.775 mm (3)
  • 0.787 mm (27)
  • 0.798 mm (26)
  • 0.8 mm (86)
  • 1.0 mm (7)
  • 1.194 mm (53)
  • 1.2 mm (53)
  • 1.201 mm (12)
  • 1.5 mm (33)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • GH2 (55)
  • KC510M (60)
  • KC522M (64)
  • KC725M (53)
  • KCK15 (53)
  • KCKP10 (34)
  • KCPK30 (63)
  • KCPM20 (27)
  • KCPM40 (64)
  • KCSM40 (67)
  • SC3025 (55)
  • SC6525 (66)
  • SP2019 (26)
  • SP4019 (26)
  • SP4659 (53)
  • SP6519 (67)
  • X400 (63)
  • X500 (69)
  • X700 (26)
Hand Of Tool
Hand Of Tool
  • R (60)
Wiper Insert
Wiper Insert
  • N (47)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.2 (1)
  • 0.24 (2)
  • 0.3 (1)
  • 0.32 (3)
  • 0.45 (5)
  • 0.5 (5)
  • 0.6 (2)
  • 0.7 (3)
  • 0.71 (3)
  • 0.8 (7)
  • 0.93 (2)
  • 1.0 (1)
  • 1.27 (1)
  • 1.33 (2)
  • 1.44 (1)
  • 1.5 (5)
  • 1.8 (5)
  • 2.23 (2)
  • 2.28 (1)
  • 2.8 (3)
  • 2.84 (1)
  • 3.42 (2)
  • 5.94 (2)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • S-SQUARE 90 (107)
  • X-PARALLELOGRAM 75 (27)
Neck Diameter
Neck Diameter
  • 0.022 in (1)
  • 0.027 in (1)
  • 0.034 in (2)
  • 0.035 in (1)
  • 0.044 in (1)
  • 0.045 in (2)
  • 0.046 in (2)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 13.8 mm (1)
  • 17.2 mm (1)
  • 22.276 mm (1)
  • 22.401 mm (1)
  • 23.0 mm (1)
  • 28.8 mm (1)
  • 29.0 mm (2)
  • 30.0 mm (2)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • S-SQUARE 90 (47)
Insert IC Size
Insert IC Size
  • 7.0 mm (5)
  • 9.525 mm (20)
  • 12.701 mm (22)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.276 in (5)
  • 0.375 in (20)
  • 0.5 in (22)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 7.0 mm (5)
  • 9.525 mm (20)
  • 12.701 mm (22)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.011 in (5)
  • 0.015 in (20)
  • 0.02 in (22)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • D (12)
  • D41 (20)
  • D411 (7)
  • D721 (2)
  • GP (6)
Cutting Tool Material
Cutting Tool Material
  • H W (47)
Tolerance Class
Tolerance Class
  • L (25)
  • P (22)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (10)
  • SCREW-ON (15)
  • SHELL MILL (35)
Back-End Diameter
Back-End Diameter
  • 13.0 mm (1)
  • 16.0 mm (4)
  • 18.0 mm (1)
  • 20.0 mm (1)
  • 21.0 mm (4)
  • 22.0 mm (19)
  • 25.0 mm (3)
  • 27.0 mm (7)
  • 29.0 mm (9)
  • 32.0 mm (8)
  • 40.0 mm (3)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.512 in (1)
  • 0.63 in (4)
  • 0.709 in (1)
  • 0.787 in (1)
  • 0.828 in (4)
  • 0.866 in (19)
  • 0.984 in (3)
  • 1.063 in (7)
  • 1.143 in (9)
  • 1.26 in (8)
  • 1.575 in (3)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
    • Applied Filters:
    • Clear all filters
  • X First Choice:
View Products in
Metric
Inch

ORIGINAL PRODUCT

7792VXD12

Fräswerkzeuge für hohe Vorschübe
(4 Products)
  • PlanfräsenPlanfräsen
  • Schräg-Eintauchfräsen Ins VolleSchräg-Eintauchfräsen Ins Volle
  • Spiralförmiges InterpolierenSpiralförmiges Interpolieren
  • AuskammernAuskammern
  • Tauchfräsen: Kugelkopf / VollradiusTauchfräsen: Kugelkopf / Vollradius
  • SenkenSenken
  • Slotting: ShoulderSlotting: Shoulder
  • Spiral CircularSpiral Circular
  • Inclined Square End MillInclined Square End Mill
  • Fräsen – Innere KühlmittelzuführungFräsen – Innere Kühlmittelzuführung
  • Schaft – AufschraubbarSchaft – Aufschraubbar
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [L2] Head Length [L2] Head Length [G3X] Connection Thread Size External [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [Z] Number of Flutes
5659132 7792VXD12SA032Z2R43 7792VXD12SA032Z2R43 S   32.0000 1.260 10.6000 .4170 43.0000 1.692 M16 17.0000 .6690 2.5000 .0980 2
    List price:
    $363.14 /each.
    Your price::
    6025280 7792VXD12SA032Z3R43 7792VXD12SA032Z3R43   32.0000 1.259 13.8640 .5458 43.0000 1.692 M16 17.0000 .6693 2.5000 .0984 3  
      List price:
      $554.59 /each.
      Your price::
      6025561 7792VXD12SA035Z3R43 7792VXD12SA035Z3R43   35.0000 1.377 16.8430 .6631 43.0000 1.692 M16 17.0000 .6693 2.5000 .0984 3  
        List price:
        $554.59 /each.
        Your price::
        6025562 7792VXD12SA042Z4R43 7792VXD12SA042Z4R43   42.0000 1.653 23.8300 .9380 43.0000 1.692 M16 17.0000 .6693 2.5000 .0984 4  
          List price:
          $414.19 /each.
          Your price::
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor

          ORIGINAL PRODUCT

          7792VXD12

          Fräswerkzeuge für hohe Vorschübe
          (2 Products)
          • PlanfräsenPlanfräsen
          • Schräg-Eintauchfräsen Ins VolleSchräg-Eintauchfräsen Ins Volle
          • Spiralförmiges InterpolierenSpiralförmiges Interpolieren
          • AuskammernAuskammern
          • Tauchfräsen: Kugelkopf / VollradiusTauchfräsen: Kugelkopf / Vollradius
          • SenkenSenken
          • Slotting: ShoulderSlotting: Shoulder
          • Spiral CircularSpiral Circular
          • Inclined Square End MillInclined Square End Mill
          • Fräsen – Innere KühlmittelzuführungFräsen – Innere Kühlmittelzuführung
          • Zylinderschaft – ohne SpannflächeZylinderschaft – ohne Spannfläche
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [Z] Number of Flutes
          5661017 7792VXD12CA032Z2R70 7792VXD12CA032Z2R70   32.0000 1.260 32.0 1.26 10.6000 .4170 250.0000 9.843 70.0000 2.755 2.5000 .0980 2
            List price:
            $541.80 /each.
            Your price::
            6025563 7792VXD12CA032Z3R70 7792VXD12CA032Z3R70 32.0000 1.259 32.0 1.259 13.8640 .5458 250.0000 9.842 70.0000 2.755 2.5000 .0984 3  
              List price:
              $554.59 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Hochvorschub-Fräsen •7792VXP06

              Schaftfräser • Screw-On
              (4 Products)
              • PlanfräsenPlanfräsen
              • Schräg-Eintauchfräsen Ins VolleSchräg-Eintauchfräsen Ins Volle
              • Spiralförmiges InterpolierenSpiralförmiges Interpolieren
              • AuskammernAuskammern
              • Tauchfräsen: Kugelkopf / VollradiusTauchfräsen: Kugelkopf / Vollradius
              • SenkenSenken
              • Slotting: ShoulderSlotting: Shoulder
              • Spiral CircularSpiral Circular
              • Inclined Square End MillInclined Square End Mill
              • Fräsen – Innere KühlmittelzuführungFräsen – Innere Kühlmittelzuführung
              • Schaft – AufschraubbarSchaft – Aufschraubbar
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [L2] Head Length [L2] Head Length [G3X] Connection Thread Size External [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [Z] Number of Flutes
              5681105 7792VXP06SA016Z2R25 7792VXP06SA016Z2R25 S 16.0000 .6300 7.6000 .2990 25.0000 .9843 M8 8.5000 .3346 0.9000 .0350 2  
                List price:
                $312.46 /each.
                Your price::
                5681122 7792VXP06SA020Z3R35 7792VXP06SA020Z3R35 S 20.0000 .7870 11.6000 .4570 35.0000 1.378 M10 10.5000 .4134 0.9000 .0350 3  
                  List price:
                  $314.96 /each.
                  Your price::
                  5665964 7792VXP06SA025Z3R35 7792VXP06SA025Z3R35 S 25.0000 .9840 16.6000 .6540 35.0000 1.378 M12 12.5000 .4921 0.9000 .0350 3  
                    List price:
                    $325.48 /each.
                    Your price::
                    5667023 7792VXP06SA025Z4R35 7792VXP06SA025Z4R35 S   25.0000 .9840 16.6000 .6540 35.0000 1.378 M12 12.5000 .4921 0.9000 .0350 4
                      List price:
                      $338.49 /each.
                      Your price::
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor

                      ORIGINAL PRODUCT

                      7792VXD09

                      Fräswerkzeuge für hohe Vorschübe
                      (4 Products)
                      • PlanfräsenPlanfräsen
                      • Schräg-Eintauchfräsen Ins VolleSchräg-Eintauchfräsen Ins Volle
                      • Spiralförmiges InterpolierenSpiralförmiges Interpolieren
                      • AuskammernAuskammern
                      • Tauchfräsen: Kugelkopf / VollradiusTauchfräsen: Kugelkopf / Vollradius
                      • SenkenSenken
                      • Slotting: ShoulderSlotting: Shoulder
                      • Spiral CircularSpiral Circular
                      • Inclined Square End MillInclined Square End Mill
                      • Fräsen – Innere KühlmittelzuführungFräsen – Innere Kühlmittelzuführung
                      • Zylinderschaft – ohne SpannflächeZylinderschaft – ohne Spannfläche
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [Z] Number of Flutes
                      5659947 7792VXD09CA025Z2R50 7792VXD09CA025Z2R50 25.0000 .9840 25.0 .984 11.7500 .4630 200.0000 7.874 50.0000 1.969 1.5000 .0590 2  
                        List price:
                        $517.43 /each.
                        Your price::
                        6024366 7792VXD09CA025Z3R50 7792VXD09CA025Z3R50 25.0000 .9843 25.0 .9843 11.9800 .4717 200.0000 7.874 50.0000 1.968 1.5000 .0591 3  
                          List price:
                          $542.48 /each.
                          Your price::
                          5661016 7792VXD09CA032Z3R70 7792VXD09CA032Z3R70   32.0000 1.259 32.0 1.259 18.9640 .7466 250.0000 9.842 70.0000 2.755 1.5000 .0591 3
                            List price:
                            $562.42 /each.
                            Your price::
                            6024367 7792VXD09CA032Z4R70 7792VXD09CA032Z4R70 32.0000 1.259 32.0 1.259 18.9640 .7466 250.0000 9.842 70.0000 2.755 1.5000 .0591 4  
                              List price:
                              $587.15 /each.
                              Your price::
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor

                              ORIGINAL PRODUCT

                              Hochvorschub-Fräsen •7792VXP06

                              Schaftfräser • Zylinderschaft
                              (3 Products)
                              • PlanfräsenPlanfräsen
                              • Schräg-Eintauchfräsen Ins VolleSchräg-Eintauchfräsen Ins Volle
                              • Spiralförmiges InterpolierenSpiralförmiges Interpolieren
                              • AuskammernAuskammern
                              • Tauchfräsen: Kugelkopf / VollradiusTauchfräsen: Kugelkopf / Vollradius
                              • SenkenSenken
                              • Slotting: ShoulderSlotting: Shoulder
                              • Spiral CircularSpiral Circular
                              • Inclined Square End MillInclined Square End Mill
                              • Fräsen – Innere KühlmittelzuführungFräsen – Innere Kühlmittelzuführung
                              • Zylinderschaft – ohne SpannflächeZylinderschaft – ohne Spannfläche
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [Z] Number of Flutes
                              5673240 7792VXP06CA016Z2R140 7792VXP06CA016Z2R140 16.0000 .6300 16.0 .63 7.6000 .2990 188.0000 7.402 25.0000 .9843 0.9000 .0350 2  
                                List price:
                                $325.21 /each.
                                Your price::
                                5673237 7792VXP06CA020Z3R154 7792VXP06CA020Z3R154 20.0000 .7870 20.0 .787 10.8500 .4270 200.0000 7.874 32.0000 1.260 0.9000 .0350 3  
                                  List price:
                                  $403.61 /each.
                                  Your price::
                                  5666409 7792VXP06CA025Z4R154 7792VXP06CA025Z4R154   25.0150 .9848 25.0 .9843 15.9790 .6291 210.0000 8.267 40.0000 1.574 0.9000 .0354 4
                                    List price:
                                    $366.24 /each.
                                    Your price::
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor

                                    ORIGINAL PRODUCT

                                    7792VXD09

                                    Fräswerkzeuge für hohe Vorschübe
                                    (7 Products)
                                    • PlanfräsenPlanfräsen
                                    • Schräg-Eintauchfräsen Ins VolleSchräg-Eintauchfräsen Ins Volle
                                    • Spiralförmiges InterpolierenSpiralförmiges Interpolieren
                                    • AuskammernAuskammern
                                    • Tauchfräsen: Kugelkopf / VollradiusTauchfräsen: Kugelkopf / Vollradius
                                    • SenkenSenken
                                    • Slotting: ShoulderSlotting: Shoulder
                                    • Spiral CircularSpiral Circular
                                    • Inclined Square End MillInclined Square End Mill
                                    • Fräsen – Innere KühlmittelzuführungFräsen – Innere Kühlmittelzuführung
                                    • Schaft – AufschraubbarSchaft – Aufschraubbar
                                    View Products
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [L2] Head Length [L2] Head Length [G3X] Connection Thread Size External [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [Z] Number of Flutes
                                    5667916 7792VXD09SA025Z2R35 7792VXD09SA025Z2R35 S 25.0000 .9843 11.9800 .4717 35.0000 1.378 M12 12.5000 .4921 1.5000 .0591 2  
                                      List price:
                                      $440.96 /each.
                                      Your price::
                                      6024361 7792VXD09SA025Z3R35 7792VXD09SA025Z3R35   25.0000 .9843 11.9800 .4717 35.0000 1.378 M12 12.5000 .4921 1.5000 .0591 3  
                                        List price:
                                        $542.48 /each.
                                        Your price::
                                        5660448 7792VXD09SA032Z3R43 7792VXD09SA032Z3R43 S   32.0000 1.259 18.9640 .7466 43.0000 1.692 M16 17.0000 .6693 1.5000 .0591 3
                                          List price:
                                          $709.75 /each.
                                          Your price::
                                          6024362 7792VXD09SA032Z4R43 7792VXD09SA032Z4R43   32.0000 1.259 18.9640 .7466 43.0000 1.692 M16 17.0000 .6693 1.5000 .0591 4  
                                            List price:
                                            $587.15 /each.
                                            Your price::
                                            6024363 7792VXD09SA035Z4R43 7792VXD09SA035Z4R43   35.0000 1.378 21.9600 .8646 43.0000 1.692 M16 17.0000 .6693 1.5000 .0591 4  
                                              List price:
                                              $587.15 /each.
                                              Your price::
                                              6024365 7792VXD09SA042Z5R43 7792VXD09SA042Z5R43   42.0000 1.653 28.9540 1.139 43.0000 1.692 M16 17.0000 .6693 1.5000 .0591 5  
                                                List price:
                                                $606.31 /each.
                                                Your price::
                                                List price:
                                                Discount: %
                                                Your price::