successfully added to cart
View Cart

Notifications

Mark all as read

Hochleistungs-Vollhartmetall-Schaftfräser

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (2511)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1825)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1825)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1854)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (2051)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (2391)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (2319)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1857)
  • M Stainless Steel (2179)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (2179)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (2179)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (2170)
  • K Cast Iron (1886)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1886)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1886)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1848)
  • N Non-Ferrous Materials (630)
    • N1
      Wrought Aluminum
      (599)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (599)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (502)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (502)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (213)
    • N6
      Carbon, Graphite Composites, CFRP
      (62)
    • N7
      MMC's
      (44)
  • S High-Temp Alloys (1868)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1814)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1776)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1831)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1762)
  • H Hardened Materials (2472)
    • H1
      Hardened Materials 44-48 HRC
      (2460)
    • H2
      Hardened Materials 48-55 HRC
      (1090)
    • H3
      Hardened Materials 56-60 HRC
      (238)
    • H4
      Hardened Materials >60 HRC
      (183)
  • C CFRP Materials (31)
    • C1
      CFRP, CFRP / CFRP
      (31)
Select First Choice
  • BR (31)
  • CN (365)
  • DE (340)
  • GB (141)
  • IN (48)
  • SG (102)
  • US (746)
Applications
Applications
  • Drilling Drilling (247)
  • Face Milling Face Milling (818)
  • Pocket Pocket (2569)
  • Pocket Helical Pocket Helical (2714)
  • Pocket Milling Pocket Milling (2734)
  • Pocket Plunge Milling Pocket Plunge Milling (1038)
  • Profile Milling Profile Milling (319)
  • Ramping Ramping (2524)
  • Shoulder Ball Nose Shoulder Ball Nose (555)
  • Shoulder Milling Shoulder Milling (2923)
  • Shoulder Roughing Shoulder Roughing (1066)
  • Shoulder Square End Shoulder Square End (2716)
  • Slot Ball Nose Slot Ball Nose (141)
  • Slot Milling Slot Milling (2184)
  • Slot Square End Slot Square End (2134)
  • Trochoidal Milling Trochoidal Milling (897)
Cutting Diameter
Cutting Diameter
  • 0.0118 in (2)
  • 0.0157 in (2)
  • 0.0197 in (5)
  • 0.0236 in (5)
  • 0.0315 in (5)
  • 0.0394 in (9)
  • 0.0472 in (4)
  • 0.0551 in (2)
  • 0.0591 in (8)
  • 0.0625 in (2)
  • 0.063 in (3)
  • 0.0709 in (4)
  • 0.0781 in (4)
  • 0.0787 in (28)
  • 0.079 in (3)
  • 0.0938 in (4)
  • 0.094 in (1)
  • 0.0984 in (16)
  • 0.1094 in (1)
  • 0.1102 in (3)
  • 0.118 in (3)
  • 0.1181 in (28)
  • 0.125 in (31)
  • 0.1378 in (10)
  • 0.1496 in (3)
  • 0.156 in (1)
  • 0.1563 in (6)
  • 0.157 in (5)
  • 0.1575 in (58)
  • 0.1875 in (48)
  • 0.188 in (2)
  • 0.189 in (3)
  • 0.1969 in (44)
  • 0.197 in (4)
  • 0.2187 in (1)
  • 0.2188 in (3)
  • 0.2264 in (3)
  • 0.236 in (7)
  • 0.2362 in (108)
  • 0.25 in (141)
  • 0.2756 in (6)
  • 0.2813 in (4)
  • 0.3031 in (1)
  • 0.3051 in (3)
  • 0.312 in (1)
  • 0.3125 in (61)
  • 0.313 in (2)
  • 0.315 in (126)
  • 0.3438 in (1)
  • 0.3543 in (5)
  • 0.375 in (201)
  • 0.3819 in (5)
  • 0.3937 in (176)
  • 0.394 in (7)
  • 0.437 in (2)
  • 0.4375 in (20)
  • 0.438 in (2)
  • 0.4606 in (3)
  • 0.47 in (1)
  • 0.472 in (8)
  • 0.4724 in (183)
  • 0.5 in (339)
  • 0.5394 in (4)
  • 0.551 in (5)
  • 0.5512 in (34)
  • 0.5625 in (3)
  • 0.6181 in (3)
  • 0.625 in (179)
  • 0.6299 in (141)
  • 0.63 in (42)
  • 0.6969 in (3)
  • 0.7087 in (21)
  • 0.75 in (302)
  • 0.7756 in (3)
  • 0.787 in (2)
  • 0.7874 in (167)
  • 0.9843 in (129)
  • 1.0 in (271)
  • 1.25 in (80)
  • 1.2598 in (2)
  • 1.5 in (7)
  • 1.5748 in (2)
  • 1.9685 in (1)
  • 2.0 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.3 mm (2)
  • 0.4 mm (2)
  • 0.5 mm (5)
  • 0.6 mm (5)
  • 0.8 mm (5)
  • 1.0 mm (9)
  • 1.2 mm (4)
  • 1.4 mm (2)
  • 1.5 mm (8)
  • 1.588 mm (2)
  • 1.6 mm (3)
  • 1.8 mm (4)
  • 1.984 mm (4)
  • 2.0 mm (31)
  • 2.381 mm (3)
  • 2.383 mm (1)
  • 2.39 mm (1)
  • 2.5 mm (16)
  • 2.778 mm (1)
  • 2.8 mm (3)
  • 3.0 mm (31)
  • 3.175 mm (29)
  • 3.18 mm (2)
  • 3.5 mm (10)
  • 3.8 mm (3)
  • 3.96 mm (2)
  • 3.9688 mm (1)
  • 3.969 mm (3)
  • 3.97 mm (1)
  • 4.0 mm (63)
  • 4.762 mm (1)
  • 4.7625 mm (4)
  • 4.763 mm (43)
  • 4.78 mm (2)
  • 4.8 mm (3)
  • 5.0 mm (48)
  • 5.556 mm (3)
  • 5.5563 mm (1)
  • 5.75 mm (3)
  • 6.0 mm (115)
  • 6.35 mm (141)
  • 7.0 mm (6)
  • 7.1438 mm (1)
  • 7.144 mm (3)
  • 7.7 mm (1)
  • 7.75 mm (3)
  • 7.92 mm (1)
  • 7.9375 mm (8)
  • 7.938 mm (55)
  • 8.0 mm (126)
  • 8.731 mm (1)
  • 9.0 mm (5)
  • 9.52 mm (4)
  • 9.525 mm (195)
  • 9.53 mm (2)
  • 9.7 mm (5)
  • 10.0 mm (183)
  • 11.1 mm (2)
  • 11.112 mm (1)
  • 11.1125 mm (2)
  • 11.113 mm (19)
  • 11.7 mm (3)
  • 12.0 mm (192)
  • 12.7 mm (339)
  • 13.7 mm (4)
  • 14.0 mm (39)
  • 14.288 mm (3)
  • 15.7 mm (3)
  • 15.875 mm (179)
  • 16.0 mm (183)
  • 17.7 mm (3)
  • 18.0 mm (21)
  • 19.05 mm (302)
  • 19.7 mm (3)
  • 20.0 mm (169)
  • 25.0 mm (129)
  • 25.4 mm (271)
  • 31.75 mm (80)
  • 32.0 mm (2)
  • 38.1 mm (7)
  • 40.0 mm (2)
  • 50.0 mm (1)
  • 50.8 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 7.455 mm (1)
  • 7.636 mm (1)
  • 7.9375 mm (1)
  • 8.626 mm (1)
  • 9.026 mm (1)
  • 9.255 mm (1)
  • 9.615 mm (1)
  • 11.096 mm (1)
  • 11.454 mm (1)
  • 11.614 mm (1)
  • 12.098 mm (1)
  • 13.454 mm (1)
  • 14.625 mm (1)
  • 14.795 mm (1)
  • 14.829 mm (1)
  • 14.937 mm (1)
  • 14.942 mm (1)
  • 15.09 mm (1)
  • 15.17 mm (1)
  • 15.255 mm (1)
  • 15.265 mm (1)
  • 15.361 mm (1)
  • 15.454 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.2935 in (1)
  • 0.3006 in (1)
  • 0.3125 in (1)
  • 0.3396 in (1)
  • 0.3554 in (1)
  • 0.3644 in (1)
  • 0.3785 in (1)
  • 0.4369 in (1)
  • 0.451 in (1)
  • 0.4573 in (1)
  • 0.4763 in (1)
  • 0.5297 in (1)
  • 0.5758 in (1)
  • 0.5825 in (1)
  • 0.5838 in (1)
  • 0.5881 in (1)
  • 0.5883 in (1)
  • 0.5941 in (1)
  • 0.5973 in (1)
  • 0.6006 in (1)
  • 0.601 in (1)
  • 0.6048 in (1)
  • 0.6084 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.4 mm (3)
  • 0.6 mm (2)
  • 0.7 mm (2)
  • 0.9 mm (2)
  • 1.0 mm (3)
  • 1.2 mm (3)
  • 1.5 mm (9)
  • 1.6 mm (4)
  • 1.8 mm (3)
  • 2.0 mm (12)
  • 2.1 mm (2)
  • 2.4 mm (3)
  • 2.5 mm (3)
  • 3.0 mm (13)
  • 3.175 mm (3)
  • 3.2 mm (3)
  • 3.969 mm (3)
  • 3.97 mm (3)
  • 4.0 mm (26)
  • 4.763 mm (6)
  • 5.0 mm (28)
  • 5.159 mm (3)
  • 6.0 mm (44)
  • 6.35 mm (15)
  • 7.0 mm (16)
  • 7.541 mm (4)
  • 7.938 mm (9)
  • 8.0 mm (43)
  • 9.0 mm (32)
  • 9.525 mm (44)
  • 10.0 mm (34)
  • 10.716 mm (3)
  • 11.0 mm (30)
  • 11.113 mm (6)
  • 12.0 mm (58)
  • 12.7 mm (81)
  • 13.0 mm (64)
  • 14.0 mm (12)
  • 14.288 mm (8)
  • 15.0 mm (59)
  • 15.875 mm (108)
  • 15.88 mm (7)
  • 16.0 mm (46)
  • 18.0 mm (64)
  • 19.0 mm (35)
  • 19.05 mm (122)
  • 20.0 mm (18)
  • 20.6375 mm (3)
  • 20.638 mm (3)
  • 22.0 mm (67)
  • 22.225 mm (68)
  • 22.23 mm (5)
  • 23.813 mm (5)
  • 24.0 mm (67)
  • 25.0 mm (10)
  • 25.4 mm (156)
  • 26.0 mm (99)
  • 28.575 mm (33)
  • 30.0 mm (69)
  • 30.163 mm (3)
  • 31.7 mm (4)
  • 31.75 mm (188)
  • 32.0 mm (102)
  • 36.0 mm (26)
  • 37.5 mm (29)
  • 38.0 mm (81)
  • 38.1 mm (209)
  • 39.0 mm (3)
  • 39.688 mm (3)
  • 40.0 mm (14)
  • 41.27 mm (5)
  • 41.275 mm (42)
  • 41.28 mm (12)
  • 42.0 mm (3)
  • 44.45 mm (36)
  • 45.0 mm (66)
  • 47.625 mm (27)
  • 48.0 mm (20)
  • 50.0 mm (10)
  • 50.8 mm (75)
  • 53.975 mm (3)
  • 57.15 mm (94)
  • 60.0 mm (26)
  • 63.5 mm (35)
  • 66.675 mm (6)
  • 75.0 mm (18)
  • 76.2 mm (82)
  • 79.375 mm (9)
  • 80.0 mm (10)
  • 82.55 mm (15)
  • 88.9 mm (14)
  • 95.25 mm (9)
  • 100.0 mm (10)
  • 101.6 mm (44)
  • 114.3 mm (10)
  • 125.0 mm (9)
  • 127.0 mm (24)
  • 139.7 mm (6)
  • 152.4 mm (11)
  • 165.1 mm (9)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.0157 in (3)
  • 0.0394 in (3)
  • 0.0472 in (3)
  • 0.0591 in (9)
  • 0.063 in (4)
  • 0.0787 in (12)
  • 0.1181 in (13)
  • 0.1563 in (7)
  • 0.157 in (4)
  • 0.1575 in (22)
  • 0.1875 in (6)
  • 0.1969 in (24)
  • 0.197 in (4)
  • 0.2362 in (43)
  • 0.25 in (15)
  • 0.2656 in (4)
  • 0.2756 in (10)
  • 0.276 in (6)
  • 0.2969 in (4)
  • 0.3125 in (9)
  • 0.315 in (43)
  • 0.3281 in (4)
  • 0.3543 in (31)
  • 0.375 in (43)
  • 0.3937 in (34)
  • 0.4219 in (4)
  • 0.433 in (10)
  • 0.4331 in (20)
  • 0.4375 in (8)
  • 0.4724 in (58)
  • 0.4844 in (5)
  • 0.5 in (81)
  • 0.5118 in (57)
  • 0.512 in (6)
  • 0.5512 in (11)
  • 0.5625 in (9)
  • 0.5906 in (53)
  • 0.591 in (5)
  • 0.625 in (116)
  • 0.6299 in (46)
  • 0.7087 in (54)
  • 0.709 in (11)
  • 0.748 in (33)
  • 0.75 in (124)
  • 0.7874 in (18)
  • 0.8125 in (6)
  • 0.8661 in (67)
  • 0.875 in (73)
  • 0.9375 in (5)
  • 0.9449 in (64)
  • 0.9843 in (10)
  • 1.0 in (156)
  • 1.0236 in (93)
  • 1.024 in (6)
  • 1.125 in (33)
  • 1.181 in (6)
  • 1.1811 in (63)
  • 1.25 in (192)
  • 1.2598 in (102)
  • 1.417 in (11)
  • 1.4173 in (16)
  • 1.4764 in (29)
  • 1.4961 in (81)
  • 1.5 in (209)
  • 1.5748 in (11)
  • 1.625 in (59)
  • 1.75 in (36)
  • 1.7717 in (66)
  • 1.875 in (27)
  • 1.8898 in (15)
  • 1.89 in (5)
  • 1.9685 in (6)
  • 1.969 in (4)
  • 2.0 in (75)
  • 2.125 in (4)
  • 2.25 in (94)
  • 2.36 in (5)
  • 2.362 in (4)
  • 2.3622 in (17)
  • 2.5 in (35)
  • 2.625 in (7)
  • 2.95 in (5)
  • 2.9528 in (13)
  • 3.0 in (82)
  • 3.125 in (10)
  • 3.1496 in (5)
  • 3.15 in (5)
  • 3.25 in (15)
  • 3.5 in (14)
  • 3.75 in (9)
  • 3.937 in (5)
  • 3.94 in (5)
  • 4.0 in (44)
  • 4.5 in (10)
  • 4.92 in (4)
  • 4.9213 in (5)
  • 5.0 in (24)
  • 5.5 in (6)
  • 6.0 in (11)
  • 6.5 in (9)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.0866 in (3)
  • 0.1575 in (4)
  • 0.1772 in (5)
  • 0.1969 in (6)
  • 0.2362 in (8)
  • 0.25 in (9)
  • 0.3125 in (7)
  • 0.315 in (11)
  • 0.3346 in (4)
  • 0.354 in (5)
  • 0.3543 in (6)
  • 0.375 in (20)
  • 0.3937 in (9)
  • 0.433 in (6)
  • 0.4331 in (4)
  • 0.4375 in (6)
  • 0.4724 in (23)
  • 0.4844 in (4)
  • 0.5 in (55)
  • 0.5118 in (22)
  • 0.512 in (6)
  • 0.5512 in (4)
  • 0.5625 in (7)
  • 0.5906 in (4)
  • 0.591 in (8)
  • 0.6102 in (8)
  • 0.625 in (65)
  • 0.6299 in (39)
  • 0.6496 in (4)
  • 0.689 in (8)
  • 0.7087 in (44)
  • 0.709 in (10)
  • 0.748 in (17)
  • 0.75 in (94)
  • 0.7874 in (8)
  • 0.8125 in (5)
  • 0.8268 in (5)
  • 0.8661 in (29)
  • 0.875 in (63)
  • 0.9375 in (5)
  • 0.9449 in (38)
  • 0.945 in (5)
  • 0.9843 in (11)
  • 1.0 in (79)
  • 1.0039 in (5)
  • 1.0236 in (35)
  • 1.0433 in (6)
  • 1.0778 in (4)
  • 1.125 in (21)
  • 1.181 in (8)
  • 1.1811 in (69)
  • 1.25 in (144)
  • 1.2598 in (45)
  • 1.3386 in (6)
  • 1.375 in (6)
  • 1.417 in (13)
  • 1.4173 in (78)
  • 1.4961 in (30)
  • 1.5 in (149)
  • 1.5748 in (6)
  • 1.625 in (49)
  • 1.6535 in (13)
  • 1.654 in (6)
  • 1.6929 in (4)
  • 1.7077 in (6)
  • 1.7323 in (5)
  • 1.75 in (18)
  • 1.7717 in (20)
  • 1.875 in (13)
  • 1.8898 in (81)
  • 1.89 in (7)
  • 1.969 in (4)
  • 2.0 in (46)
  • 2.0866 in (18)
  • 2.1014 in (7)
  • 2.125 in (12)
  • 2.126 in (4)
  • 2.1654 in (6)
  • 2.25 in (126)
  • 2.2835 in (13)
  • 2.3323 in (7)
  • 2.36 in (5)
  • 2.362 in (5)
  • 2.3622 in (81)
  • 2.5 in (28)
  • 2.5291 in (6)
  • 2.625 in (5)
  • 2.874 in (44)
  • 2.95 in (5)
  • 2.9528 in (79)
  • 3.0 in (44)
  • 3.125 in (6)
  • 3.15 in (5)
  • 3.25 in (38)
  • 3.375 in (23)
  • 3.75 in (6)
  • 3.94 in (5)
  • 4.0 in (16)
  • 4.92 in (4)
  • 5.0 in (5)
Reach Min to Reach Max
Reach
Reach
  • 2.2 mm (3)
  • 2.5 mm (3)
  • 3.0 mm (3)
  • 3.5 mm (3)
  • 4.0 mm (4)
  • 4.5 mm (5)
  • 5.0 mm (6)
  • 5.5 mm (3)
  • 6.0 mm (11)
  • 6.35 mm (9)
  • 6.5 mm (3)
  • 7.0 mm (5)
  • 7.938 mm (7)
  • 8.0 mm (11)
  • 8.334 mm (3)
  • 8.5 mm (4)
  • 9.0 mm (11)
  • 9.525 mm (20)
  • 10.0 mm (12)
  • 10.716 mm (3)
  • 11.0 mm (10)
  • 11.113 mm (4)
  • 12.0 mm (25)
  • 12.303 mm (4)
  • 12.7 mm (55)