successfully added to cart
View Cart

HP HSS-E-PM-Gewindebohrer

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Select First Choice
  • DE (88)
  • GB (30)
  • IN (3)
  • US (90)
Applications
  • Tapping Blind Hole Tapping Blind Hole (743)
  • Tapping Through Hole Tapping Through Hole (558)
  • Threading Threading (1236)
Workpiece Material
  • P Steel (507)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (453)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (453)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (453)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (301)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (54)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (301)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (54)
  • M Stainless Steel (385)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (385)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (259)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (259)
  • K Cast Iron (84)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (84)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (84)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (84)
  • N Non-Ferrous Materials (208)
    • N1
      Wrought Aluminum
      (124)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (110)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (84)
  • S High-Temp Alloys (652)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (255)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (238)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (238)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (159)
Cutting Length
  • 0.16 (2)
  • 0.236 (4)
  • 0.276 (4)
  • 0.31 (44)
  • 0.315 (6)
  • 0.32 (18)
  • 0.35 (3)
  • 0.354 (6)
  • 0.36 (32)
  • 0.39 (59)
  • 0.394 (33)
  • 0.4 (5)
  • 0.41 (2)
  • 0.42 (2)
  • 0.43 (8)
  • 0.433 (3)
  • 0.44 (81)
  • 0.46 (13)
  • 0.47 (74)
  • 0.48 (20)
  • 0.49 (61)
  • 0.5 (7)
  • 0.51 (38)
  • 0.512 (27)
  • 0.52 (4)
  • 0.53 (17)
  • 0.55 (15)
  • 0.551 (6)
  • 0.56 (26)
  • 0.58 (1)
  • 0.59 (111)
  • 0.591 (34)
  • 0.6 (36)
  • 0.63 (58)
  • 0.669 (5)
  • 0.709 (8)
  • 0.71 (74)
  • 0.75 (8)
  • 0.77 (52)
  • 0.787 (16)
  • 0.79 (54)
  • 0.83 (12)
  • 0.866 (19)
  • 0.91 (36)
  • 0.945 (3)
  • 0.98 (23)
  • 0.984 (3)
  • 1.0 (16)
  • 1.024 (2)
  • 1.063 (3)
  • 1.18 (11)
  • 1.181 (2)
  • 1.25 (4)
  • 1.26 (2)
  • 1.31 (1)
  • 1.38 (20)
  • 1.57 (10)
  • 1.59 (1)
  • 1.77 (10)
to
Cutting Length
  • 6.0 (4)
  • 7.0 (4)
  • 7.9 (36)
  • 8.0 (19)
  • 8.1 (13)
  • 9.0 (11)
  • 9.1 (30)
  • 10.0 (97)
  • 10.5 (2)
  • 10.8 (2)
  • 10.9 (2)
  • 11.0 (9)
  • 11.1 (66)
  • 11.2 (15)
  • 11.6 (13)
  • 11.8 (13)
  • 11.9 (5)
  • 12.0 (58)
  • 12.1 (17)
  • 12.2 (3)
  • 12.4 (61)
  • 12.7 (7)
  • 13.0 (65)
  • 13.1 (4)
  • 13.4 (17)
  • 14.0 (21)
  • 14.2 (26)
  • 14.9 (1)
  • 15.0 (125)
  • 15.1 (45)
  • 15.2 (11)
  • 16.0 (58)
  • 17.0 (5)
  • 18.0 (82)
  • 19.0 (8)
  • 19.6 (52)
  • 20.0 (70)
  • 21.0 (5)
  • 21.1 (7)
  • 22.0 (19)
  • 23.0 (10)
  • 23.1 (26)
  • 24.0 (3)
  • 25.0 (26)
  • 25.4 (16)
  • 26.0 (2)
  • 27.0 (3)
  • 30.0 (13)
  • 31.8 (4)
  • 32.0 (2)
  • 33.3 (1)
  • 35.0 (20)
  • 40.0 (10)
  • 40.4 (1)
  • 45.0 (10)
to
Type of Thread
  • M-Metric/ISO (522)
  • UNC (358)
  • UNF (258)
Thread Tolerance Class ISO
  • 6H-I (79)
  • 6HX-I (360)
Thread Tolerance Class ANSI
  • 2B (28)
  • 2BX (63)
  • 3B (27)
  • 3BX (175)
Tap PD Class
  • D10 (4)
  • D11 (9)
  • D12 (8)
  • D3 (16)
  • D4 (18)
  • D5 (32)
  • D6 (18)
  • D7 (1)
  • D8 (4)
  • D9 (16)
  • H10 (8)
  • H2 (50)
  • H3 (156)
  • H4 (37)
  • H5 (91)
  • H6 (19)
  • H7 (36)
Connection Style
  • Cylindrical with Drive Square (1249)
Number of Flutes
  • 2 (125)
  • 3 (680)
  • 4 (204)
  • 5 (60)
  • 6 (8)
Internal Coolant Capability
application
Coating
  • TiN (190)
Grade Of Cutting Tool
  • KM6515 (143)
  • KP6505 (36)
  • KP6525 (349)
  • KSH26 (18)
  • KSMN34 (81)
  • KSN28 (26)
  • KSN38 (17)
  • KSP21 (62)
  • KSP27 (217)
  • KSS20 (79)
  • KSS29 (147)
  • KSSM24 (80)
Hand Of Tool
  • R (1255)
Tap Type
  • 1 (3)
  • 11 (26)
  • 13 (81)
  • 3 (178)
  • 8 (967)
Tap Standard
  • ANSI (594)
  • DIN 2174 (52)
  • DIN 371 (158)
  • DIN 374 (94)
  • DIN 376 (125)
  • DIN-ANSI (207)
frontEnd
Thread TPI
  • 8.0 (4)
  • 10.0 (16)
  • 11.0 (21)
  • 13.0 (38)
  • 14.0 (25)
  • 16.0 (55)
  • 18.0 (64)
  • 20.0 (106)
  • 24.0 (113)
  • 28.0 (57)
  • 32.0 (120)
  • 36.0 (8)
  • 40.0 (42)
  • 48.0 (3)
  • 56.0 (18)
to
Thread TPI
  • 8.0 (4)
  • 10.0 (16)
  • 11.0 (21)
  • 13.0 (38)
  • 14.0 (25)
  • 16.0 (55)
  • 18.0 (64)
  • 20.0 (106)
  • 24.0 (113)
  • 28.0 (57)
  • 32.0 (120)
  • 36.0 (8)
  • 40.0 (42)
  • 48.0 (3)
  • 56.0 (18)
to
Thread Pitch
  • 0.45 (7)
  • 0.5 (32)
  • 0.6 (3)
  • 0.7 (31)
  • 0.8 (37)
  • 1.0 (87)
  • 1.25 (80)
  • 1.5 (116)
  • 1.75 (43)
  • 2.0 (54)
  • 2.5 (19)
  • 3.0 (11)
  • 3.5 (20)
  • 4.0 (10)
  • 4.5 (10)
to
Thread Pitch
  • 0.45 (7)
  • 0.5 (32)
  • 0.6 (3)
  • 0.7 (31)
  • 0.8 (37)
  • 1.0 (87)
  • 1.25 (80)
  • 1.5 (116)
  • 1.75 (43)
  • 2.0 (54)
  • 2.5 (19)
  • 3.0 (11)
  • 3.5 (20)
  • 4.0 (10)
  • 4.5 (10)
to
Chamfer Form
  • FB (131)
  • PC (493)
  • SB (631)
backEnd
Connection Type
  • CYLINDRICAL (1255)
Back-End Diameter
  • 0.1378 (10)
  • 0.138 (2)
  • 0.141 (119)
  • 0.1417 (2)
  • 0.157 (1)
  • 0.1575 (5)
  • 0.168 (61)
  • 0.177 (2)
  • 0.1772 (16)
  • 0.194 (82)
  • 0.22 (2)
  • 0.236 (4)
  • 0.2362 (65)
  • 0.255 (108)
  • 0.2756 (33)
  • 0.315 (52)
  • 0.318 (114)
  • 0.323 (44)
  • 0.354 (6)
  • 0.3543 (56)
  • 0.367 (85)
  • 0.381 (98)
  • 0.3937 (36)
  • 0.394 (6)
  • 0.429 (13)
  • 0.433 (2)
  • 0.4331 (38)
  • 0.472 (4)
  • 0.4724 (36)
  • 0.48 (43)
  • 0.551 (1)
  • 0.5512 (19)
  • 0.59 (26)
  • 0.6299 (8)
  • 0.7087 (12)
  • 0.8 (4)
  • 0.8661 (10)
  • 0.9843 (10)
  • 1.1024 (10)
  • 1.2598 (10)
to
Back-End Diameter
  • 3.5 (12)
  • 3.581 (121)
  • 4.0 (6)
  • 4.267 (61)
  • 4.5 (18)
  • 4.928 (82)
  • 5.588 (2)
  • 6.0 (69)
  • 6.077 (1)
  • 6.477 (108)
  • 7.0 (33)
  • 8.0 (52)
  • 8.077 (113)
  • 8.204 (44)
  • 9.0 (62)
  • 9.322 (85)
  • 9.677 (98)
  • 10.0 (42)
  • 10.897 (13)
  • 11.0 (40)
  • 12.0 (40)
  • 12.192 (43)
  • 14.0 (20)
  • 14.986 (26)
  • 16.0 (8)
  • 18.0 (12)
  • 20.32 (4)
  • 22.0 (10)
  • 25.0 (10)
  • 28.0 (10)
  • 32.0 (10)
to
other
Grade
  • KM6515 (143)
  • KP6505 (36)
  • KP6525 (349)
  • KSH26 (18)
  • KSMN34 (81)
  • KSN28 (26)
  • KSN38 (17)
  • KSP21 (62)
  • KSP27 (217)
  • KSS20 (79)
  • KSS29 (147)
  • KSSM24 (80)
Platform
  • Beyond HSS-E-PM Taps (1194)
Tool Unit
  • I (752)
  • M (503)
kmtConfigurable
  • false (1255)
Over All Length [L]
  • 44.45 (2)
  • 44.5 (13)
  • 44.6 (2)
  • 45.0 (3)
  • 46.1 (9)
  • 47.6 (11)
  • 47.7 (15)
  • 47.8 (2)
  • 49.2 (4)
  • 49.3 (13)
  • 49.4 (2)
  • 50.5 (4)
  • 50.6 (10)
  • 50.7 (7)
  • 50.8 (8)
  • 51.5 (3)
  • 53.8 (23)
  • 53.9 (13)
  • 54.0 (6)
  • 54.1 (6)
  • 54.9 (5)
  • 56.0 (33)
  • 56.5 (2)
  • 60.0 (1)
  • 60.1 (9)
  • 60.2 (18)
  • 60.3 (17)
  • 60.4 (13)
  • 60.5 (4)
  • 61.4 (5)
  • 63.0 (30)
  • 63.3 (4)
  • 63.4 (25)
  • 63.5 (35)
  • 63.7 (2)
  • 63.8 (11)
  • 68.7 (11)
  • 68.8 (1)
  • 68.9 (2)
  • 69.0 (42)
  • 69.1 (4)
  • 69.2 (8)
  • 69.3 (11)
  • 70.0 (42)
  • 70.3 (1)
  • 70.4 (1)
  • 70.7 (2)
  • 74.3 (16)
  • 74.5 (27)
  • 74.6 (13)
  • 74.7 (2)
  • 74.9 (11)
  • 80.0 (65)
  • 80.3 (38)
  • 80.4 (1)
  • 80.9 (2)
  • 85.9 (52)
  • 90.0 (93)
  • 90.5 (2)
  • 90.9 (1)
  • 91.0 (1)
  • 91.2 (7)
  • 96.8 (27)
  • 100.0 (153)
  • 100.1 (8)
  • 101.1 (2)
  • 108.0 (17)
  • 110.0 (137)
  • 125.0 (21)
  • 130.0 (1)
  • 130.3 (3)
  • 140.0 (9)
  • 160.0 (6)
  • 180.0 (10)
  • 200.0 (15)
  • 250.0 (15)
  • 300.0 (5)
to
Over All Length [L]
  • 1.75 (17)
  • 1.77 (3)
  • 1.81 (9)
  • 1.88 (28)
  • 1.94 (17)
  • 1.95 (2)
  • 1.99 (21)
  • 2.0 (8)
  • 2.03 (3)
  • 2.12 (36)
  • 2.13 (12)
  • 2.16 (5)
  • 2.2 (13)
  • 2.205 (13)
  • 2.21 (7)
  • 2.22 (2)
  • 2.36 (5)
  • 2.37 (40)
  • 2.38 (17)
  • 2.42 (5)
  • 2.48 (30)
  • 2.49 (4)
  • 2.5 (60)
  • 2.51 (13)
  • 2.7 (6)
  • 2.71 (8)
  • 2.72 (52)
  • 2.73 (13)
  • 2.756 (15)
  • 2.76 (27)
  • 2.77 (2)
  • 2.78 (2)
  • 2.92 (12)
  • 2.93 (19)
  • 2.94 (27)
  • 2.95 (11)
  • 3.149 (1)
  • 3.15 (64)
  • 3.16 (39)
  • 3.18 (2)
  • 3.38 (52)
  • 3.54 (50)
  • 3.543 (35)
  • 3.55 (8)
  • 3.56 (2)
  • 3.58 (2)
  • 3.59 (7)
  • 3.81 (27)
  • 3.91 (2)
  • 3.937 (65)
  • 3.94 (94)
  • 3.98 (2)
  • 4.25 (17)
  • 4.33 (104)
  • 4.331 (33)
  • 4.92 (18)
  • 4.921 (3)
  • 5.12 (1)
  • 5.13 (3)
  • 5.51 (5)
  • 5.512 (4)
  • 6.3 (6)
  • 7.09 (10)
  • 7.87 (15)
  • 9.84 (15)
  • 11.81 (5)
to
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • Gewindedrehen: SacklochbohrungGewindedrehen: Sacklochbohrung
  • HSS-E-PMHSS-E-PM
  • Toleranzklasse: 6HXToleranzklasse: 6HX
  • DIN 371DIN 371
  • DIN 376DIN 376
  • Anschnitt Form C (2–3)Anschnitt Form C (2–3)
  • Spiralwinkel Gewindebohrer: 0°Spiralwinkel Gewindebohrer: 0°
  • Innere Kühlmittelzuführung: Axial: GewindebohrenInnere Kühlmittelzuführung: Axial: Gewindebohren
  • Herstellerspezifikationen: MHerstellerspezifikationen: M
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
4035525 T641M050X080R6HX-D1 T641M050X080R6HX-D1   KP6525 M5 X 0,8 70.0000 2.760 10.0000 .3900 25.0000 .9800 6.0 .2362 3 DIN 371 6HX-I
    List price:
    $69.50 /each.
    Your price::
    Qty
    4035526 T641M060X100R6HX-D1 T641M060X100R6HX-D1   KP6525 M6 X 1 80.0000 3.150 10.0000 .3900 30.0000 1.180 6.0 .2362 4 DIN 371 6HX-I
      List price:
      $70.65 /each.
      Your price::
      Qty
      4035527 T641M080X125R6HX-D1 T641M080X125R6HX-D1   KP6525 M8 X 1,25 90.0000 3.540 13.0000 .5100 35.0000 1.380 8.0 .315 4 DIN 371 6HX-I
        List price:
        $80.56 /each.
        Your price::
        Qty
        4035528 T641M100X150R6HX-D1 T641M100X150R6HX-D1   KP6525 M10 X 1,5 100.0000 3.940 15.0000 .5900 39.0000 1.540 10.0 .3937 4 DIN 371 6HX-I
          List price:
          $92.54 /each.
          Your price::
          Qty
          4035529 T641M120X175R6HX-D6 T641M120X175R6HX-D6   KP6525 M12 X 1,75 110.0000 4.330 18.0000 .7100 44.0000 1.730 9.0 .3543 4 DIN 376 6HX-I
            List price:
            $112.37 /each.
            Your price::
            Qty
            4035530 T641M140X200R6HX-D6 T641M140X200R6HX-D6   KP6525 M14 X 2 110.0000 4.330 20.0000 .7900 52.0000 2.050 11.0 .4331 4 DIN 376 6HX-I
              List price:
              $149.59 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Hochleistungs-Gewindebohrer

              Beyond™ HSS-E-PM Gewindebohrer mit gerader Spannut • Sackloch- und Durchgangsbohrungen
              (11 Products)
              • Gewindebohren: DurchgangsbohrungGewindebohren: Durchgangsbohrung
              • Gewindedrehen: SacklochbohrungGewindedrehen: Sacklochbohrung
              • HSS-E-PMHSS-E-PM
              • Toleranzklasse: 6HXToleranzklasse: 6HX
              • DIN 371DIN 371
              • DIN 376DIN 376
              • Spiralwinkel Gewindebohrer: 0°Spiralwinkel Gewindebohrer: 0°
              • Anschnitt Form C (2–3)Anschnitt Form C (2–3)
              • Herstellerspezifikationen: MHerstellerspezifikationen: M
              • Außenkühlung: GewindebohrenAußenkühlung: Gewindebohren
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
              4035459 T640M040X070R6HX-D1 T640M040X070R6HX-D1   KP6525 M4 X 0,7 63.0000 2.480 10.0000 .3900 21.0000 .8300 4.5 .1772 3 DIN 371 6HX-I
                List price:
                $46.71 /each.
                Your price::
                Qty
                4035460 T640M050X080R6HX-D1 T640M050X080R6HX-D1   KP6525 M5 X 0,8 70.0000 2.760 10.0000 .3900 25.0000 .9900 6.0 .2362 3 DIN 371 6HX-I
                  List price:
                  $48.26 /each.
                  Your price::
                  Qty
                  4035461 T640M060X100R6HX-D1 T640M060X100R6HX-D1   KP6525 M6 X 1 80.0000 3.150 10.0000 .4000 30.0000 1.180 6.0 .2362 4 DIN 371 6HX-I
                    List price:
                    $49.08 /each.
                    Your price::
                    Qty
                    4035462 T640M080X125R6HX-D1 T640M080X125R6HX-D1   KP6525 M8 X 1,25 90.0000 3.550 13.0000 .5100 35.1000 1.380 8.0 .315 4 DIN 371 6HX-I
                      List price:
                      $57.97 /each.
                      Your price::
                      Qty
                      4035463 T640M100X150R6HX-D1 T640M100X150R6HX-D1   KP6525 M10 X 1,5 100.1000 3.940 15.1000 .5900 39.1000 1.540 10.0 .3937 4 DIN 371 6HX-I
                        List price:
                        $70.40 /each.
                        Your price::
                        Qty
                        4035464 T640M120X175R6HX-D6 T640M120X175R6HX-D6   KP6525 M12 X 1,75 110.0000 4.330 18.0000 .7100 44.0000 1.730 9.0 .3543 4 DIN 376 6HX-I
                          List price:
                          $82.86 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          Hochleistungs-Gewindebohrer

                          Beyond™ HSS-E-PM Gewindebohrer • Sacklochbohrungen
                          (42 Products)
                          • Gewindedrehen: SacklochbohrungGewindedrehen: Sacklochbohrung
                          • HSS-E-PMHSS-E-PM
                          • Toleranzklasse: 6HXToleranzklasse: 6HX
                          • DIN 371DIN 371
                          • DIN 374DIN 374
                          • DIN 376DIN 376
                          • Anschnitt Form C (2–3)Anschnitt Form C (2–3)
                          • Herstellerspezifikationen: MHerstellerspezifikationen: M
                          • Herstellerspezifikationen: MFHerstellerspezifikationen: MF
                          • Spiralwinkel Gewindebohrer: 45°Spiralwinkel Gewindebohrer: 45°
                          • Außenkühlung: GewindebohrenAußenkühlung: Gewindebohren
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
                          3868572 T630M040X070R6HX-D1 T630M040X070R6HX-D1   KP6525 M4 X 0,7 63.0000 2.480 10.0000 .3900 21.0000 .8300 4.5 .1772 3 DIN 371 6HX-I
                            List price:
                            $44.46 /each.
                            Your price::
                            Qty
                            3868826 T630M040X070R6HX-D1 T630M040X070R6HX-D1   KM6515 M4 X 0,7 63.0000 2.480 10.0000 .3900 21.0000 .8300 4.5 .1772 3 DIN 371 6HX-I