Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

KM™

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Back Boring Back Boring (469)
  • Blind & Cross Hole Finishing Blind & Cross Hole Finishing (166)
  • Blind Hole Finishing Blind Hole Finishing (166)
  • CRT Boring CRT Boring (3)
  • CRT Profiling CRT Profiling (3)
  • Chamfer Turning Chamfer Turning (608)
  • Convex Drilling Convex Drilling (9)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (9)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (9)
  • Counterboring Counterboring (9)
  • Countersinking Countersinking (9)
  • Cut-Off Cut-Off (215)
  • Deep Grooving Deep Grooving (233)
  • Drilling Drilling (12)
  • Face Grooving Face Grooving (199)
  • Facing Facing (1155)
  • Flat Bottom Drilling Flat Bottom Drilling (9)
  • Grooving Grooving (246)
  • ID Facing ID Facing (66)
  • ID Grooving ID Grooving (237)
  • ID Thread Turning ID Thread Turning (225)
  • Inclined Entry Drilling Inclined Entry Drilling (9)
  • Inclined Exit Drilling Inclined Exit Drilling (9)
  • Multiple Direction Cutting Multiple Direction Cutting (1607)
  • OD Thread Turning OD Thread Turning (227)
  • Plunge Turning Plunge Turning (621)
  • Pre-Condition Pre-Condition (23)
  • Profiling Profiling (1110)
  • Stacked Plates Drilling Stacked Plates Drilling (9)
  • TRN Boring TRN Boring (936)
  • Threading Threading (204)
  • Through & Cross Hole Finishing Through & Cross Hole Finishing (166)
  • Through Hole Finishing Through Hole Finishing (166)
  • Turning Turning (1226)
  • X-Offset Drilling X-Offset Drilling (9)
Cutting Diameter
  • 15.875 (1)
  • 17.462 (1)
  • 19.05 (1)
  • 20.638 (1)
  • 22.225 (1)
  • 23.812 (1)
  • 25.4 (1)
  • 26.988 (1)
  • 27.0 (1)
  • 28.575 (1)
  • 29.0 (1)
  • 30.162 (1)
  • 31.0 (1)
  • 31.75 (1)
  • 33.35 (1)
  • 34.925 (1)
  • 38.1 (1)
  • 39.7 (1)
  • 41.275 (1)
  • 44.45 (1)
  • 47.625 (1)
  • 49.212 (1)
  • 50.8 (1)
to
Cutting Diameter
  • 0.625 (1)
  • 0.6875 (1)
  • 0.75 (1)
  • 0.8125 (1)
  • 0.875 (1)
  • 0.9375 (1)
  • 1.0 (1)
  • 1.0625 (1)
  • 1.063 (1)
  • 1.125 (1)
  • 1.1417 (1)
  • 1.1875 (1)
  • 1.2205 (1)
  • 1.25 (1)
  • 1.313 (1)
  • 1.375 (1)
  • 1.5 (1)
  • 1.563 (1)
  • 1.625 (1)
  • 1.75 (1)
  • 1.875 (1)
  • 1.9375 (1)
  • 2.0 (1)
to
Reach
  • 64.0 (1)
  • 72.0 (1)
  • 76.0 (1)
  • 81.0 (1)
  • 86.0 (1)
  • 90.0 (1)
  • 95.0 (1)
  • 96.0 (1)
  • 100.0 (1)
  • 103.0 (1)
  • 107.0 (1)
  • 110.0 (1)
  • 115.0 (1)
  • 117.0 (1)
  • 123.0 (1)
  • 129.0 (1)
  • 139.0 (1)
  • 145.0 (1)
  • 158.0 (1)
  • 167.0 (1)
  • 182.0 (1)
  • 187.0 (1)
  • 191.0 (1)
to
Reach
  • 2.5197 (1)
  • 2.8346 (1)
  • 2.9921 (1)
  • 3.189 (1)
  • 3.3858 (1)
  • 3.5433 (1)
  • 3.7402 (1)
  • 3.7795 (1)
  • 3.937 (1)
  • 4.0551 (1)
  • 4.2126 (1)
  • 4.3307 (1)
  • 4.5276 (1)
  • 4.6063 (1)
  • 4.8425 (1)
  • 5.0787 (1)
  • 5.4724 (1)
  • 5.7087 (1)
  • 6.2205 (1)
  • 6.5748 (1)
  • 7.1654 (1)
  • 7.3622 (1)
  • 7.5197 (1)
to
Tool Cutting Edge Angle
  • 45.0 (66)
  • 48.0 (15)
  • 49.783 (3)
  • 50.0 (4)
  • 61.0 (2)
  • 62.5 (25)
  • 63.0 (8)
  • 67.5 (4)
  • 72.5 (3)
  • 75.0 (157)
  • 85.0 (4)
  • 90.0 (479)
  • 92.0 (8)
  • 93.0 (388)
  • 95.0 (400)
  • 97.0 (4)
  • 107.5 (88)
to
Internal Coolant Capability
application
Hand Of Tool
  • R (23)
Drill Type
  • 86-01 (23)
Minimum Axial Groove Diameter
  • 0.188 (4)
  • 0.227 (3)
  • 0.236 (1)
  • 0.273 (2)
  • 0.278 (4)
  • 0.279 (4)
  • 0.308 (2)
  • 0.342 (4)
  • 0.36 (10)
  • 0.384 (4)
  • 0.4 (4)
  • 0.422 (6)
  • 0.437 (8)
  • 0.439 (7)
  • 0.5118 (14)
  • 0.512 (1)
  • 0.561 (4)
  • 0.6299 (17)
  • 0.63 (4)
  • 0.7283 (5)
  • 0.787 (2)
  • 0.7874 (28)
  • 0.984 (1)
  • 0.9843 (37)
  • 1.2598 (110)
  • 1.26 (13)
  • 1.3386 (8)
  • 1.5748 (109)
  • 1.575 (12)
  • 1.6535 (2)
  • 1.732 (17)
  • 1.7323 (1)
  • 1.7717 (2)
  • 1.9685 (47)
  • 1.969 (49)
  • 2.126 (52)
  • 2.362 (2)
  • 2.48 (24)
  • 2.4803 (10)
  • 2.5197 (2)
  • 2.7559 (1)
  • 2.756 (55)
  • 2.913 (4)
  • 3.15 (61)
  • 3.386 (94)
  • 3.543 (6)
  • 3.5433 (1)
  • 3.701 (2)
  • 3.937 (49)
  • 4.094 (2)
  • 4.173 (73)
  • 4.1732 (10)
  • 4.6457 (1)
  • 4.646 (1)
  • 4.724 (2)
  • 4.7244 (1)
  • 5.118 (2)
  • 5.9055 (1)
  • 5.906 (1)
  • 27.0 (2)
  • 28.0 (4)
to
Minimum Axial Groove Diameter
  • 4.77 (4)
  • 5.78 (3)
  • 6.0 (1)
  • 6.93 (2)
  • 7.06 (4)
  • 7.09 (4)
  • 7.82 (2)
  • 8.68 (4)
  • 9.14 (10)
  • 9.75 (4)
  • 10.16 (4)
  • 10.72 (6)
  • 11.1 (8)
  • 11.15 (7)
  • 13.0 (15)
  • 14.25 (4)
  • 16.0 (21)
  • 18.5 (5)
  • 20.0 (30)
  • 25.0 (38)
  • 32.0 (123)
  • 34.0 (8)
  • 40.0 (121)
  • 42.0 (2)
  • 44.0 (18)
  • 45.0 (2)
  • 50.0 (97)
  • 54.0 (52)
  • 60.0 (2)
  • 63.0 (33)
  • 64.0 (2)
  • 70.0 (56)
  • 74.0 (4)
  • 80.0 (61)
  • 86.0 (94)
  • 90.0 (7)
  • 94.0 (2)
  • 100.0 (49)
  • 104.0 (2)
  • 106.0 (83)
  • 118.0 (2)
  • 120.0 (3)
  • 130.0 (2)
  • 150.0 (2)
to
Maximum Axial Groove Diameter
  • 22.0 (6)
  • 26.0 (2)
  • 27.0 (2)
  • 32.0 (10)
to
Maximum Axial Groove Diameter
  • 0.8661 (6)
  • 1.0236 (2)
  • 1.063 (2)
  • 1.2598 (10)
to
Maximum Bore Depth
  • 16.8 (4)
  • 20.8 (4)
  • 22.2 (1)
  • 22.21 (1)
  • 25.3 (2)
  • 25.4 (2)
  • 25.7 (2)
  • 25.8 (4)
  • 26.4 (10)
  • 33.0 (14)
  • 35.0 (30)
  • 35.16 (5)
  • 35.19 (2)
  • 36.33 (1)
  • 38.3 (4)
  • 38.4 (4)
  • 40.0 (85)
  • 41.0 (15)
  • 42.0 (4)
  • 42.01 (2)
  • 42.03 (2)
  • 42.21 (7)
  • 42.27 (2)
  • 43.21 (2)
  • 45.0 (19)
  • 45.17 (2)
  • 48.3 (1)
  • 49.22 (2)
  • 50.0 (115)
  • 50.45 (2)
  • 51.8 (4)
  • 55.0 (2)
  • 55.09 (15)
  • 56.0 (3)
  • 56.11 (12)
  • 56.16 (2)
  • 57.25 (2)
  • 58.0 (4)
  • 60.0 (153)
  • 60.47 (4)
  • 62.07 (4)
  • 70.0 (82)
  • 70.02 (12)
  • 70.11 (2)
  • 70.32 (4)
  • 70.36 (1)
  • 70.47 (6)
  • 75.0 (4)
  • 75.04 (20)
  • 76.02 (8)
  • 77.14 (4)
  • 77.33 (8)
  • 79.55 (1)
  • 80.0 (14)
  • 80.04 (2)
  • 81.26 (4)
  • 87.23 (8)
  • 87.5 (4)
  • 88.11 (2)
  • 88.23 (8)
  • 88.29 (2)
  • 88.3 (2)
  • 88.52 (2)
  • 91.26 (4)
  • 91.28 (2)
  • 96.02 (12)
  • 96.26 (9)
  • 99.25 (2)
  • 100.0 (8)
  • 104.4 (4)
  • 112.07 (12)
  • 112.22 (2)
  • 113.37 (1)
  • 115.0 (18)
  • 117.14 (13)
  • 117.38 (1)
  • 120.0 (2)
  • 120.02 (4)
  • 120.34 (14)
  • 140.0 (4)
  • 149.4 (9)
to
Maximum Bore Depth
  • 0.66 (3)
  • 0.661 (1)
  • 0.819 (1)
  • 0.82 (3)
  • 0.874 (2)
  • 1.0 (4)
  • 1.012 (2)
  • 1.016 (2)
  • 1.02 (2)
  • 1.039 (6)
  • 1.04 (4)
  • 1.299 (6)
  • 1.3 (8)
  • 1.378 (30)
  • 1.3842 (2)
  • 1.3843 (3)
  • 1.3854 (2)
  • 1.43 (1)
  • 1.5079 (2)
  • 1.508 (2)
  • 1.51 (2)
  • 1.512 (2)
  • 1.575 (85)
  • 1.614 (8)
  • 1.6142 (7)
  • 1.6535 (2)
  • 1.6539 (2)
  • 1.654 (2)
  • 1.6547 (2)
  • 1.6618 (7)
  • 1.664 (2)
  • 1.701 (2)
  • 1.772 (19)
  • 1.778 (2)
  • 1.902 (1)
  • 1.9378 (2)
  • 1.968 (2)
  • 1.9685 (2)
  • 1.969 (111)
  • 1.986 (2)
  • 2.0394 (4)
  • 2.165 (2)
  • 2.1689 (15)
  • 2.2047 (3)
  • 2.209 (4)
  • 2.2091 (8)
  • 2.211 (2)
  • 2.254 (2)
  • 2.2835 (4)
  • 2.362 (145)
  • 2.3622 (8)
  • 2.3807 (2)
  • 2.381 (2)
  • 2.444 (4)
  • 2.756 (82)
  • 2.7567 (10)
  • 2.757 (2)
  • 2.7602 (2)
  • 2.7685 (4)
  • 2.77 (1)
  • 2.774 (2)
  • 2.7744 (4)
  • 2.9528 (3)
  • 2.953 (1)
  • 2.954 (1)
  • 2.9543 (19)
  • 2.9929 (8)
  • 3.037 (4)
  • 3.0445 (8)
  • 3.132 (1)
  • 3.1496 (7)
  • 3.15 (7)
  • 3.151 (2)
  • 3.1992 (2)
  • 3.2 (2)
  • 3.434 (4)
  • 3.4343 (4)
  • 3.445 (4)
  • 3.4689 (2)
  • 3.474 (8)
  • 3.476 (4)
  • 3.485 (2)
  • 3.5929 (1)
  • 3.593 (3)
  • 3.594 (2)
  • 3.7803 (12)
  • 3.7898 (4)
  • 3.79 (5)
  • 3.908 (2)
  • 3.937 (8)
  • 4.11 (4)
  • 4.412 (10)
  • 4.4122 (2)
  • 4.418 (2)
  • 4.464 (1)
  • 4.528 (18)
  • 4.612 (13)
  • 4.621 (1)
  • 4.7244 (2)
  • 4.7252 (4)
  • 4.7378 (8)
  • 4.738 (6)
  • 5.5118 (4)
  • 5.866 (1)
  • 5.882 (8)
to
frontEnd
Clamp Style
  • C (32)
  • D (127)
  • M (524)
  • N (200)
  • P (270)
  • S (414)
  • W (2)
  • Y (87)
Adapter Front-End
  • BORING BAR ADAPTER (100)
  • CARTRIDGE MOUNT (70)
  • COMBI SHELL ADAPTER (20)
  • CUTOFF SUPPORT BLADE (22)
  • DRILL CHUCK ADAPTER (4)
  • DRILL SHANK 2 FLATS (10)
  • END MILL ADAPTER (85)
  • ER COLLET CHUCK (43)
  • EXTENSION (18)
  • HYDRAULIC CHUCK (34)
  • HYDRAULIC CHUCK-SLIM LINE (16)
  • HYRAULIC CHUCK-HIGH TORQUE (4)
  • KM MODULAR ADAPTER (318)
  • KM MODULAR ADAPTER-4 UNITS (2)
  • MORSE TAPER ADAPTER (6)
  • RC TAP CHUCK ADAPTER-T & C (2)
  • REDUCER (43)
  • SCREW-ON ADAPTER (27)
  • SHELL MILL ADAPTER (66)
  • SHRINK FIT ADAPTER (69)
  • SQUARE SHANK ADAPTER (51)
  • SQUARE SHANK ADAPTER-2 SLOTS (2)
  • SQUARE SHANK ADAPTER-4 SLOTS (1)
  • TAP CHUCK ADAPTER (4)
  • TG COLLET CHUCK (14)
  • WHISTLE DRIVE ADAPTER (2)
  • WHISTLE NOTCH ADAPTER (47)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (367)
  • D-DIAMOND/RHOMBIC 55 (364)
  • G-RHOMBIC 45 (24)
  • LT-TRIANGLE LAY DOWN THREAD 60 (89)
  • N/K-PARALLELOGRAM 55 (4)
  • ON EDGE MISC (4)
  • PRISMATIC (85)
  • R-ROUND (37)
  • S-SQUARE 90 (162)
  • T-TRIANGLE 60 (158)
  • TN-TOP NOTCH (150)
  • V-DIAMOND/RHOMBIC 35 (119)
  • W-TRIGON 80 (89)
Front End Type
  • BKA - Boring Head Adapter (7)
  • FDA - Milling Cutter Arbor (79)
  • KMM - KM Micro System (54)
  • KMS - KM TBD System (28)
  • KMT - KM Adapter (288)
  • MCS - Modular Cartridge System (81)
  • MKG - Morse Taper (6)
  • PMK - Prismatic Adapter Kenna (22)
  • SPK-Holding Arbor-Spindle Head (7)
  • SWB - Tap Chuck Adapter (6)
  • SZK - Collet Taper (57)
  • VKT - Square Shank (54)
  • ZYL - Cylindrical Adapter (406)
Maximum Cutting Depth
  • 0.0 (17)
  • 3.0 (4)
  • 3.18 (2)
  • 3.505 (1)
  • 3.51 (21)
  • 4.5 (3)
  • 5.33 (29)
  • 5.36 (2)
  • 7.0 (1)
  • 7.47 (8)
  • 7.61 (2)
  • 8.0 (14)
  • 8.24 (2)
  • 9.0 (1)
  • 10.0 (2)
  • 10.24 (2)
  • 10.25 (6)
  • 10.54 (2)
  • 11.0 (1)
  • 11.5 (6)
  • 12.0 (1)
  • 13.5 (8)
  • 14.0 (16)
  • 16.0 (22)
  • 19.0 (1)
  • 20.0 (1)
  • 26.0 (4)
  • 33.0 (1)
  • 40.15 (2)
to
Maximum Cutting Depth
  • 0.0 (14)
  • 0.1181 (4)
  • 0.1252 (2)
  • 0.138 (16)
  • 0.1382 (6)
  • 0.1772 (3)
  • 0.2098 (6)
  • 0.21 (23)
  • 0.211 (2)
  • 0.2756 (1)
  • 0.294 (8)
  • 0.3 (2)
  • 0.315 (14)
  • 0.3244 (2)
  • 0.3543 (1)
  • 0.3937 (2)
  • 0.403 (2)
  • 0.4031 (2)
  • 0.4035 (4)
  • 0.415 (2)
  • 0.4331 (1)
  • 0.453 (6)
  • 0.4724 (1)
  • 0.5315 (5)
  • 0.532 (3)
  • 0.5512 (16)
  • 0.6299 (22)
  • 0.748 (1)
  • 0.7874 (1)
  • 1.0236 (4)
  • 1.2992 (1)
  • 1.5807 (2)
to
Insert Size
  • 1 (1)
  • 1.5 (9)
  • 2 (60)
  • 2B (8)
  • 3 (78)
  • 4 (50)
  • 5 (20)
  • 6 (4)
Front End Style
  • BKA01 Intchg Heads (H) Pilot (7)
  • FDA03 Longit &Transver Drive (3)
  • FDA12 Transv Drive&CutRetScr (10)
  • FDA13 Long&TranDrv&CutRetScr (10)
  • FDA22 Transv Drive & SHCS (45)
  • FDA23 Longit&Transv Drv&SHCS (7)
  • FDA42TranDrvw/CtrScrwORBoltCir (4)
  • KMM01 Std Km-Micro Size (27)
  • KMM02 Enlarged Flange (27)
  • KMS-01 Std KM-TBD NotOnCntr (10)
  • KMS-02 Englarged Flange OnCntr (18)
  • KMT00 All KM, except 02,05,09 (288)
  • MCS01 Modular Deep Grooving (81)
  • MKG20Expel Key w/o Coolant (6)
  • PMK02 Cutoff Sup Bld A1-A3 (14)
  • PMK03 CutOffBld A1-A3 Hlfw/Pin (8)
  • SPK02 Bolt Circ Dia 101.6 mm (7)
  • SWB-01 WFL#...WES#(Bilz) (6)
  • SZK02 Collets 8 Degree Taper (43)
  • SZK03 TG Collets (14)
  • VKT01 Std Design (54)
  • ZYL-54 15Deg Surf w/Pos Slot (1)
  • ZYL01 Straight Shank (128)
  • ZYL03 Attachment Thread (27)
  • ZYL10 Weldon Shank (74)
  • ZYL13 2Deg-Whistle Notch (46)
  • ZYL14 Weldon+Whistle Notch (11)
  • ZYL22 Boring Bar Shank (106)
  • ZYL56 2Plain Clamp Surf w/Pcs (10)
  • ZYL63 2Deg Surf w/Cyl.w/drive (3)
Gage Length
  • 4.8000 (6)
  • 7.5000 (1)
  • 10.0000 (1)
  • 12.0000 (4)
  • 12.5000 (1)
  • 14.0000 (13)
  • 15.0000 (2)
  • 16.0000 (16)
  • 17.0000 (2)
  • 18.0000 (3)
  • 18.5000 (1)
  • 20.0000 (10)
  • 21.5900 (1)
  • 22.0000 (2)
  • 23.0000 (7)
  • 23.4000 (2)
  • 25.0000 (40)
  • 25.4000 (5)
  • 26.0000 (11)
  • 28.0000 (10)
  • 28.0120 (2)
  • 28.2860 (2)
  • 30.0000 (33)
  • 31.4450 (1)
  • 31.7500 (2)
  • 32.0000 (23)
  • 35.0000 (7)
  • 35.1820 (2)
  • 35.2500 (4)
  • 36.0000 (2)
  • 37.0000 (3)
  • 37.6000 (4)
  • 38.0000 (5)
  • 38.1000 (4)
  • 38.8990 (2)
  • 40.0000 (32)
  • 41.2750 (1)
  • 42.0000 (2)
  • 43.0000 (5)
  • 44.4500 (2)
  • 44.9600 (1)
  • 45.0000 (25)
  • 45.0500 (1)
  • 46.9000 (4)
  • 47.0000 (11)
  • 48.0000 (8)
  • 48.2500 (2)
  • 49.2000 (2)
  • 50.0000 (33)
  • 50.0500 (1)
  • 50.3000 (2)
  • 51.0000 (1)
  • 52.0000 (2)
  • 53.5000 (9)
  • 55.0000 (27)
  • 55.3000 (4)
  • 56.0000 (1)
  • 57.0000 (6)
  • 57.1500 (2)
  • 58.0000 (7)
  • 58.4000 (1)
  • 58.5000 (10)
  • 59.0000 (5)
  • 60.0000 (59)
  • 62.2000 (1)
  • 63.0000 (5)
  • 63.5000 (18)
  • 64.7700 (1)
  • 65.0000 (34)
  • 66.5000 (8)
  • 69.5200 (1)
  • 70.0000 (51)
  • 70.0500 (1)