successfully added to cart
View Cart

PSC 50

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Facing Facing (150)
  • Grooving Grooving (10)
  • ID Facing ID Facing (125)
  • ID Grooving ID Grooving (23)
  • ID Thread Turning ID Thread Turning (18)
  • Multiple Direction Cutting Multiple Direction Cutting (150)
  • OD Thread Turning OD Thread Turning (4)
  • Plunge Turning Plunge Turning (57)
  • Profiling Profiling (8)
  • TRN Boring TRN Boring (125)
  • Turning Turning (150)
Workpiece Material
  • P Steel (199)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (199)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (199)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (199)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (199)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (199)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (199)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (199)
  • M Stainless Steel (199)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (199)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (199)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (199)
  • K Cast Iron (199)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (199)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (199)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (199)
  • N Non-Ferrous Materials (192)
    • N1
      Wrought Aluminum
      (190)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (190)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (126)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (191)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (190)
    • N6
      Carbon, Graphite Composites, CFRP
      (174)
    • N7
      MMC's
      (181)
  • S High-Temp Alloys (199)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (199)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (199)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (199)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (199)
  • H Hardened Materials (173)
    • H1
      Hardened Materials 44-48 HRC
      (173)
    • H2
      Hardened Materials 48-55 HRC
      (152)
    • H3
      Hardened Materials 56-60 HRC
      (138)
    • H4
      Hardened Materials >60 HRC
      (128)
Type of Thread
  • 55 (22)
  • 60 (49)
  • ACME (43)
  • API (31)
  • API BUTTRESS (10)
  • API RD (25)
  • BSPT (12)
  • BSW (35)
  • BUTTRESS (27)
  • M (38)
  • NPT (25)
  • NPTF (12)
  • RD DIN 405 (22)
  • STUB ACME (35)
  • TR DIN 103 (22)
  • UN (39)
  • UNJ (25)
Cutting Condition
  • Heavily Interrupted Cut (169)
  • Interrupted (82)
  • Lightly Interrupted Cut (169)
  • Smooth Cut (169)
  • Varying Depth of Cut (169)
Cutting Condition Material
  • H-All (144)
  • K-All (169)
  • K1 (41)
  • M-All (167)
  • N-All (156)
  • P-All (169)
  • S-All (163)
  • S2 (75)
  • S4 (40)
Tool Cutting Edge Angle
  • 45.0 (11)
  • 62.5 (2)
  • 72.5 (1)
  • 75.0 (17)
  • 90.0 (63)
  • 93.0 (41)
  • 95.0 (48)
  • 107.5 (16)
to
Connection Style
  • PSC (137)
Cutting Edges Per Insert
  • 1.0 (120)
  • 2.0 (136)
  • 3.0 (29)
  • 4.0 (105)
  • 6.0 (6)
  • 8.0 (55)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.03 (9)
  • 0.038 (31)
  • 0.051 (18)
  • 0.056 (5)
  • 0.057 (7)
  • 0.066 (13)
  • 0.07 (10)
  • 0.071 (1)
  • 0.076 (34)
  • 0.08 (25)
  • 0.081 (5)
  • 0.082 (1)
  • 0.085 (1)
  • 0.086 (1)
  • 0.089 (6)
  • 0.09 (6)
  • 0.091 (1)
  • 0.094 (13)
  • 0.097 (12)
  • 0.1 (100)
  • 0.102 (68)
  • 0.108 (5)
  • 0.116 (6)
  • 0.117 (7)
  • 0.127 (13)
  • 0.131 (13)
  • 0.132 (13)
  • 0.133 (13)
  • 0.135 (1)
  • 0.15 (13)
  • 0.152 (10)
  • 0.155 (13)
  • 0.157 (13)
  • 0.159 (1)
  • 0.16 (13)
  • 0.165 (21)
  • 0.173 (13)
  • 0.178 (14)
  • 0.185 (3)
  • 0.19 (27)
  • 0.191 (27)
  • 0.198 (13)
  • 0.2 (106)
  • 0.202 (16)
  • 0.203 (54)
  • 0.21 (10)
  • 0.223 (1)
  • 0.224 (13)
  • 0.235 (13)
  • 0.24 (1)
  • 0.244 (6)
  • 0.25 (16)
  • 0.251 (13)
  • 0.254 (24)
  • 0.269 (14)
  • 0.279 (2)
  • 0.282 (13)
  • 0.284 (13)
  • 0.3 (13)
  • 0.305 (8)
  • 0.31 (1)
  • 0.315 (17)
  • 0.318 (22)
  • 0.33 (13)
  • 0.34 (30)
  • 0.343 (8)
  • 0.356 (13)
  • 0.381 (1)
  • 0.394 (2)
  • 0.397 (106)
  • 0.4 (126)
  • 0.404 (13)
  • 0.406 (37)
  • 0.43 (13)
  • 0.432 (10)
  • 0.445 (21)
  • 0.472 (6)
  • 0.49 (13)
  • 0.5 (6)
  • 0.508 (13)
  • 0.533 (2)
  • 0.565 (4)
  • 0.57 (7)
  • 0.572 (21)
  • 0.575 (14)
  • 0.6 (4)
  • 0.7 (5)
  • 0.75 (6)
  • 0.76 (1)
  • 0.787 (19)
  • 0.79 (11)
  • 0.791 (8)
  • 0.792 (37)
  • 0.794 (115)
  • 0.8 (137)
  • 0.902 (21)
  • 0.93 (4)
  • 0.936 (5)
  • 1.0 (19)
  • 1.01 (1)
  • 1.188 (16)
  • 1.19 (20)
  • 1.191 (96)
  • 1.194 (19)
  • 1.195 (7)
  • 1.2 (135)
  • 1.25 (19)
  • 1.404 (4)
  • 1.5 (19)
  • 1.515 (1)
  • 1.585 (13)
  • 1.587 (20)
  • 1.588 (84)
  • 1.59 (4)
  • 1.6 (92)
  • 1.75 (19)
  • 1.98 (7)
  • 1.981 (13)
  • 2.0 (21)
  • 2.25 (21)
  • 2.38 (6)
  • 2.381 (7)
  • 2.388 (21)
  • 2.39 (4)
  • 2.4 (28)
  • 2.5 (8)
  • 3.175 (8)
  • 3.18 (4)
  • 3.2 (10)
  • 4.0 (5)
  • 5.0 (2)
  • 6.0 (3)
  • 6.35 (2)
  • 7.94 (3)
  • 8.0 (3)
  • 10.0 (2)
to
Corner Radius
  • 0.001 (4)
  • 0.0012 (5)
  • 0.0015 (31)
  • 0.002 (18)
  • 0.0023 (7)
  • 0.0026 (13)
  • 0.0028 (11)
  • 0.003 (34)
  • 0.0031 (20)
  • 0.0032 (6)
  • 0.0033 (1)
  • 0.0034 (1)
  • 0.0035 (6)
  • 0.0037 (13)
  • 0.0038 (12)
  • 0.0039 (1)
  • 0.004 (121)
  • 0.0043 (5)
  • 0.0046 (13)
  • 0.005 (13)
  • 0.0052 (13)
  • 0.0053 (14)
  • 0.0059 (13)
  • 0.006 (23)
  • 0.0062 (13)
  • 0.0063 (6)
  • 0.0065 (21)
  • 0.0068 (13)
  • 0.007 (14)
  • 0.0075 (27)
  • 0.0078 (17)
  • 0.0079 (10)
  • 0.008 (111)
  • 0.0083 (30)
  • 0.0088 (14)
  • 0.0093 (13)
  • 0.0094 (1)
  • 0.0096 (6)
  • 0.0099 (13)
  • 0.01 (24)
  • 0.0106 (14)
  • 0.011 (2)
  • 0.0111 (13)
  • 0.0112 (13)
  • 0.0118 (13)
  • 0.012 (8)
  • 0.0122 (1)
  • 0.0124 (13)
  • 0.0125 (22)
  • 0.013 (30)
  • 0.0135 (21)
  • 0.014 (13)
  • 0.015 (1)
  • 0.0155 (2)
  • 0.0156 (126)
  • 0.0158 (11)
  • 0.0159 (13)
  • 0.016 (96)
  • 0.017 (23)
  • 0.0175 (21)
  • 0.0186 (6)
  • 0.0193 (13)
  • 0.0197 (6)
  • 0.02 (13)
  • 0.021 (2)
  • 0.022 (5)
  • 0.0225 (21)
  • 0.0276 (5)
  • 0.0295 (6)
  • 0.0298 (1)
  • 0.031 (98)
  • 0.0311 (8)
  • 0.0312 (115)
  • 0.0313 (137)
  • 0.0315 (51)
  • 0.0355 (21)
  • 0.0368 (4)
  • 0.0369 (5)
  • 0.0394 (19)
  • 0.0398 (1)
  • 0.0468 (16)
  • 0.0469 (135)
  • 0.047 (103)
  • 0.0472 (24)
  • 0.0492 (19)
  • 0.0516 (11)
  • 0.0553 (4)
  • 0.0591 (19)
  • 0.0597 (1)
  • 0.0625 (119)
  • 0.063 (69)
  • 0.0689 (19)
  • 0.078 (13)
  • 0.0787 (21)
  • 0.0886 (21)
  • 0.0938 (35)
  • 0.094 (33)
  • 0.0984 (8)
  • 0.106 (7)
  • 0.125 (8)
  • 0.126 (10)
  • 0.1563 (20)
  • 0.1575 (5)
  • 0.1969 (2)
  • 0.197 (2)
  • 0.2362 (3)
  • 0.25 (2)
  • 0.312 (17)
  • 0.3125 (3)
  • 0.315 (3)
  • 0.3935 (2)
  • 0.3937 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (75)
  • 241 (20)
  • AC5 (6)
  • CG4 (2)
  • CL4 (59)
  • CM2 (68)
  • CM3 (66)
  • CM4 (37)
  • CM5 (8)
  • CPX (75)
  • CW2 (37)
  • CW2015 (69)
  • CW5025 (75)
  • GH1 (4)
  • GX (42)
  • HCK10 (22)
  • HCK20 (5)
  • HK1500 (81)
  • HK35 (13)
  • HT2 (81)
  • HTX (53)
  • HWK10 (2)
  • HWK15 (21)
  • K060 (38)
  • K090 (77)
  • K1 (29)
  • K1010P (4)
  • K10M (105)
  • K10P (90)
  • K10U (88)
  • K15 (14)
  • K15U (88)
  • K20K (98)
  • K21 (40)
  • K25M (95)
  • K25P (88)
  • K2885 (19)
  • K313 (168)
  • K35P (49)
  • K420 (91)
  • K45 (41)
  • K4H (16)
  • K68 (158)
  • KB1340 (41)
  • KB1345 (68)
  • KB1610 (69)
  • KB1625 (57)
  • KB1630 (67)
  • KB5610 (60)
  • KB5625 (80)
  • KB5630 (53)
  • KB9610 (88)
  • KB9640 (47)
  • KBH10 (86)
  • KBH10B (47)
  • KBH20 (94)
  • KBH20B (47)
  • KBK35 (20)
  • KC210 (64)
  • KC250 (80)
  • KC5010 (185)
  • KC5020P (15)
  • KC5025 (191)
  • KC5410 (152)
  • KC5510 (91)
  • KC5525 (60)
  • KC710 (60)
  • KC720 (141)
  • KC722 (53)
  • KC730 (174)
  • KC7310 (103)
  • KC732 (112)
  • KC8050 (150)
  • KC810 (163)
  • KC850 (172)
  • KC9010 (109)
  • KC9025 (139)
  • KC910 (145)
  • KC9105 (129)
  • KC9110 (175)
  • KC9120 (131)
  • KC9125 (148)
  • KC9125RR (11)
  • KC9140 (97)
  • KC9145 (78)
  • KC9210 (17)
  • KC9215 (95)
  • KC9225 (137)
  • KC9240 (137)
  • KC9240NEW (137)
  • KC9245 (95)
  • KC9315 (150)
  • KC9320 (159)
  • KC9325 (116)
  • KC935 (166)
  • KC950 (142)
  • KC990 (113)
  • KCD25 (51)
  • KCK05 (139)
  • KCK05B (112)
  • KCK15 (132)
  • KCK15B (149)
  • KCK20 (159)
  • KCK20B (162)
  • KCM15 (129)
  • KCM15B (131)
  • KCM25 (145)
  • KCM25B (128)
  • KCM35 (115)
  • KCM35B (86)
  • KCP05 (122)
  • KCP05B (92)
  • KCP10 (147)
  • KCP10B (174)
  • KCP15 (10)
  • KCP25 (150)
  • KCP25B (175)
  • KCP30 (139)
  • KCP30B (101)
  • KCP40 (76)
  • KCP40B (94)
  • KCPK05 (97)
  • KCS10 (65)
  • KCS10B (140)
  • KCU10 (177)
  • KCU25 (171)
  • KD050 (75)
  • KD081 (82)
  • KD100 (65)
  • KD120 (70)
  • KD1400 (60)
  • KD1405 (40)
  • KD1425 (81)
  • KM1 (37)
  • KMF (20)
  • KT1120 (17)
  • KT125 (70)
  • KT150 (49)
  • KT175 (100)
  • KT315 (147)
  • KT325 (81)
  • KT5020 (3)
  • KTP10 (33)
  • KU10 (24)
  • KU10T (135)
  • KU25T (33)
  • KU30T (154)
  • KY1310 (50)
  • KY1320 (75)
  • KY1540 (43)
  • KY1615 (79)
  • KY2000 (49)
  • KY2100 (38)
  • KY3000 (96)
  • KY3400 (59)
  • KY3500 (79)
  • KY4000 (40)
  • KY4300 (38)
  • KY4400 (75)
  • KYHK15B (75)
  • KYK10 (42)
  • KYK25 (55)
  • KYK35 (79)
  • KYS25 (43)
  • KYS30 (47)
  • MC2 (5)
  • NL200 (37)
  • NL250 (89)
  • NL300 (76)
  • NL400 (35)
  • NL920 (81)
  • P25 (45)
  • PB100 (27)
  • PB170 (31)
  • PB250 (35)
  • PB300 (21)
  • PD100 (21)
  • PD50 (13)
  • PN120 (1)
  • PS5 (47)
  • SP0819 (58)
  • SP0A00 (11)
  • SP0G00 (1)
  • SP0PW3 (8)
  • SP3019 (50)
  • SP4019 (63)
  • SP4036 (3)
  • SP4066 (5)
  • SP4093 (3)
  • SP61EJ (11)
  • SPADAP (9)
  • SPN3W1 (8)
  • SPN4W2 (4)
  • SPSREJ (2)
  • THM (99)
  • THM-X (68)
  • THMF-X (31)
  • TN10P (143)
  • TN10U (96)
  • TN15M (117)
  • TN15U (88)
  • TN2000 (93)
  • TN20K (117)
  • TN20P (131)
  • TN30M (127)
  • TN30P (76)
  • TN4000 (81)
  • TN5015 (108)
  • TN5020 (116)
  • TN5105 (92)
  • TN5120 (127)
  • TN6010 (96)
  • TN6025 (115)
  • TN7005 (86)
  • TN7010 (129)
  • TN7015 (130)
  • TN7025 (129)
  • TN7035 (107)
  • TN7105 (93)
  • TN7110 (143)
  • TN7115 (127)
  • TN7125 (122)
  • TN7135 (111)
  • TN8025 (109)
  • TTI15 (73)
  • TTM (8)
  • TTM09 (24)
  • TTR (56)
  • TTR-X (4)
  • TTS (66)
  • TTX (60)
  • W00342 (17)
  • WBH10C (84)
  • WBH10P (53)
  • WBH10U (69)
  • WBH20P (86)
  • WBH25P (65)
  • WBH25U (72)
  • WBH30P (53)
  • WBK40U (41)
  • WBK45U (67)
  • WDN00U (35)
  • WDN25U (60)
  • WK05CT (117)
  • WK15CT (89)
  • WK20CT (136)
  • WM15CT (125)
  • WM25CT (125)
  • WM35CT (91)
  • WP05CT (24)
  • WP15CT (136)
  • WP20TT (15)
  • WP25CT (136)
  • WP35CT (132)
  • WS10PT (111)
  • WS25PT (105)
  • WU10HT (130)
  • WU10PT (11)
  • WU25PT (7)
  • X00511 (20)
  • YY3A00 (1)
Hand Of Tool
  • L (57)
  • N (11)
  • R (69)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 0.7283 (2)
  • 0.7874 (8)
  • 0.9449 (2)
  • 0.9843 (11)
  • 1.2598 (19)
  • 1.2992 (4)
  • 1.3189 (2)
  • 1.5157 (4)
  • 1.5748 (13)
  • 1.626 (2)
  • 1.874 (2)
  • 1.8898 (1)
  • 1.9094 (3)
  • 1.9685 (15)
  • 2.0669 (1)
  • 2.252 (2)
  • 2.4409 (4)
  • 2.4803 (10)
  • 2.5197 (2)
  • 2.5591 (6)
  • 2.5787 (1)
  • 2.5984 (2)
  • 2.6772 (1)
  • 3.1496 (2)
  • 3.5 (2)
  • 4.3307 (38)
  • 4.9213 (7)
  • 5.5 (2)
  • 5.9449 (2)
  • 6.4961 (7)
  • 6.6929 (1)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
  • 8.7795 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 18.5 (2)
  • 20.0 (8)
  • 24.0 (2)
  • 25.0 (11)
  • 32.0 (19)
  • 33.0 (4)
  • 33.5 (2)
  • 38.5 (4)
  • 40.0 (13)
  • 41.3 (2)
  • 47.6 (2)
  • 48.0 (1)
  • 48.5 (3)
  • 50.0 (15)
  • 52.5 (1)
  • 57.2 (2)
  • 62.0 (4)
  • 63.0 (10)
  • 64.0 (2)
  • 65.0 (6)
  • 65.5 (1)
  • 66.0 (2)
  • 68.0 (1)
  • 80.0 (2)
  • 88.9 (2)
  • 110.0 (38)
  • 125.0 (7)
  • 139.7 (2)
  • 151.0 (2)
  • 165.0 (7)
  • 170.0 (1)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
  • 223.0 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (27)
to
Maximum Axial Groove Diameter
  • 393.661 (27)
to
Cutting Direction
  • B (33)
  • E (49)
  • S (55)
Rake Angle Style
  • DOUBLE NEGATIVE (66)
  • NEGATIVE-ZERO (29)
  • NEUTRAL (ZERO) (21)
Maximum Bore Depth
  • 36.0 (4)
  • 36.8 (2)
  • 42.0 (2)
  • 46.0 (4)
  • 47.0 (4)
  • 50.0 (1)
  • 51.0 (2)
  • 52.0 (16)
  • 56.0 (7)
  • 60.0 (44)
  • 62.0 (2)
  • 64.0 (4)
  • 65.0 (2)
  • 66.0 (6)
  • 67.0 (13)
  • 68.0 (4)
  • 80.0 (5)
  • 84.0 (2)
  • 88.0 (9)
  • 88.4 (2)
  • 89.0 (2)
  • 100.0 (4)
  • 113.0 (3)
  • 118.0 (2)
  • 119.0 (9)
  • 150.0 (5)
to
Maximum Bore Depth
  • 1.4173 (4)
  • 1.4488 (2)
  • 1.6535 (2)
  • 1.811 (4)
  • 1.8504 (4)
  • 1.9685 (1)
  • 2.0079 (2)
  • 2.0472 (16)
  • 2.2047 (7)
  • 2.3622 (44)
  • 2.4409 (2)
  • 2.5197 (4)
  • 2.5591 (2)
  • 2.5984 (6)
  • 2.6378 (13)
  • 2.6772 (4)
  • 3.1496 (5)
  • 3.3071 (2)
  • 3.4646 (9)
  • 3.4803 (2)
  • 3.5039 (2)
  • 3.937 (4)
  • 4.4488 (3)
  • 4.6457 (2)
  • 4.685 (9)
  • 5.9055 (5)