successfully added to cart
View Cart

PSC 63

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Back Boring Back Boring (2)
  • Facing Facing (122)
  • Grooving Grooving (14)
  • ID Facing ID Facing (102)
  • ID Grooving ID Grooving (14)
  • ID Thread Turning ID Thread Turning (26)
  • Multiple Direction Cutting Multiple Direction Cutting (151)
  • OD Thread Turning OD Thread Turning (3)
  • Plunge Turning Plunge Turning (18)
  • Profiling Profiling (29)
  • TRN Boring TRN Boring (102)
  • Turning Turning (134)
Workpiece Material
  • P Steel (181)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (181)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (181)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (181)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (181)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (181)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (181)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (181)
  • M Stainless Steel (181)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (181)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (181)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (181)
  • K Cast Iron (181)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (181)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (181)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (181)
  • N Non-Ferrous Materials (179)
    • N1
      Wrought Aluminum
      (177)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (177)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (110)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (178)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (177)
    • N6
      Carbon, Graphite Composites, CFRP
      (170)
    • N7
      MMC's
      (164)
  • S High-Temp Alloys (181)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (181)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (181)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (181)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (181)
  • H Hardened Materials (161)
    • H1
      Hardened Materials 44-48 HRC
      (161)
    • H2
      Hardened Materials 48-55 HRC
      (140)
    • H3
      Hardened Materials 56-60 HRC
      (122)
    • H4
      Hardened Materials >60 HRC
      (114)
Type of Thread
  • 55 (22)
  • 60 (48)
  • ACME (42)
  • API (27)
  • API BUTTRESS (7)
  • API RD (27)
  • BSPT (15)
  • BSW (34)
  • BUTTRESS (26)
  • M (37)
  • NPT (27)
  • NPTF (15)
  • RD DIN 405 (22)
  • STUB ACME (34)
  • TR DIN 103 (22)
  • UN (41)
  • UNJ (27)
Cutting Condition
  • Heavily Interrupted Cut (147)
  • Interrupted (82)
  • Lightly Interrupted Cut (147)
  • Smooth Cut (147)
  • Varying Depth of Cut (147)
Cutting Condition Material
  • H-All (128)
  • K-All (147)
  • K1 (21)
  • M-All (145)
  • N-All (141)
  • P-All (147)
  • S-All (145)
  • S2 (73)
  • S4 (34)
Tool Cutting Edge Angle
  • 45.0 (10)
  • 62.5 (2)
  • 72.5 (2)
  • 75.0 (14)
  • 90.0 (61)
  • 93.0 (41)
  • 95.0 (40)
  • 107.5 (14)
to
Connection Style
  • PSC (122)
Cutting Edges Per Insert
  • 1.0 (104)
  • 2.0 (129)
  • 3.0 (26)
  • 4.0 (90)
  • 6.0 (4)
  • 8.0 (55)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.03 (13)
  • 0.038 (22)
  • 0.051 (21)
  • 0.056 (6)
  • 0.057 (6)
  • 0.066 (12)
  • 0.07 (11)
  • 0.071 (2)
  • 0.076 (35)
  • 0.08 (25)
  • 0.081 (5)
  • 0.082 (2)
  • 0.085 (2)
  • 0.086 (2)
  • 0.089 (6)
  • 0.09 (6)
  • 0.091 (2)
  • 0.094 (12)
  • 0.097 (11)
  • 0.1 (75)
  • 0.102 (63)
  • 0.108 (5)
  • 0.116 (6)
  • 0.117 (6)
  • 0.127 (12)
  • 0.13 (2)
  • 0.131 (12)
  • 0.132 (12)
  • 0.133 (12)
  • 0.135 (2)
  • 0.15 (12)
  • 0.152 (11)
  • 0.155 (12)
  • 0.157 (12)
  • 0.159 (2)
  • 0.16 (13)
  • 0.165 (20)
  • 0.173 (12)
  • 0.178 (14)
  • 0.185 (3)
  • 0.19 (26)
  • 0.191 (26)
  • 0.198 (12)
  • 0.2 (85)
  • 0.202 (15)
  • 0.203 (41)
  • 0.21 (11)
  • 0.223 (2)
  • 0.224 (12)
  • 0.235 (12)
  • 0.24 (2)
  • 0.244 (6)
  • 0.25 (15)
  • 0.251 (12)
  • 0.254 (23)
  • 0.269 (14)
  • 0.279 (4)
  • 0.282 (12)
  • 0.284 (12)
  • 0.3 (12)
  • 0.305 (4)
  • 0.31 (2)
  • 0.315 (16)
  • 0.318 (22)
  • 0.33 (12)
  • 0.34 (30)
  • 0.343 (8)
  • 0.356 (12)
  • 0.381 (2)
  • 0.396 (1)
  • 0.397 (81)
  • 0.4 (102)
  • 0.404 (12)
  • 0.406 (38)
  • 0.43 (12)
  • 0.432 (7)
  • 0.445 (20)
  • 0.472 (6)
  • 0.49 (12)
  • 0.5 (8)
  • 0.508 (12)
  • 0.533 (3)
  • 0.565 (4)
  • 0.57 (6)
  • 0.572 (20)
  • 0.575 (14)
  • 0.6 (4)
  • 0.7 (5)
  • 0.75 (6)
  • 0.76 (2)
  • 0.787 (18)
  • 0.79 (4)
  • 0.792 (32)
  • 0.794 (87)
  • 0.795 (1)
  • 0.8 (123)
  • 0.902 (20)
  • 0.93 (2)
  • 0.936 (5)
  • 1.0 (20)
  • 1.01 (2)
  • 1.188 (23)
  • 1.19 (14)
  • 1.191 (94)
  • 1.194 (18)
  • 1.195 (6)
  • 1.2 (115)
  • 1.25 (18)
  • 1.404 (2)
  • 1.5 (18)
  • 1.515 (2)
  • 1.585 (12)
  • 1.587 (14)
  • 1.588 (88)
  • 1.59 (4)
  • 1.6 (92)
  • 1.75 (18)
  • 1.98 (6)
  • 1.981 (12)
  • 2.0 (20)
  • 2.25 (20)
  • 2.38 (14)
  • 2.381 (8)
  • 2.388 (20)
  • 2.39 (4)
  • 2.4 (38)
  • 2.5 (8)
  • 3.175 (8)
  • 3.18 (4)
  • 3.2 (26)
  • 4.0 (12)
  • 5.0 (2)
  • 6.0 (2)
  • 6.35 (2)
  • 7.94 (2)
  • 8.0 (2)
  • 10.0 (2)
to
Corner Radius
  • 0.001 (2)
  • 0.0011 (6)
  • 0.0012 (5)
  • 0.0015 (22)
  • 0.002 (21)
  • 0.0023 (6)
  • 0.0026 (12)
  • 0.0028 (13)
  • 0.003 (35)
  • 0.0031 (20)
  • 0.0032 (7)
  • 0.0033 (2)
  • 0.0034 (2)
  • 0.0035 (6)
  • 0.0037 (12)
  • 0.0038 (11)
  • 0.0039 (2)
  • 0.004 (96)
  • 0.0043 (5)
  • 0.0046 (12)
  • 0.005 (14)
  • 0.0052 (12)
  • 0.0053 (14)
  • 0.0059 (12)
  • 0.006 (23)
  • 0.0062 (12)
  • 0.0063 (7)
  • 0.0065 (20)
  • 0.0068 (12)
  • 0.007 (14)
  • 0.0075 (26)
  • 0.0078 (14)
  • 0.0079 (8)
  • 0.008 (92)
  • 0.0083 (25)
  • 0.0088 (14)
  • 0.0093 (12)
  • 0.0094 (2)
  • 0.0096 (6)
  • 0.0099 (12)
  • 0.01 (23)
  • 0.0106 (14)
  • 0.011 (4)
  • 0.0111 (12)
  • 0.0112 (12)
  • 0.0118 (12)
  • 0.012 (4)
  • 0.0122 (2)
  • 0.0124 (12)
  • 0.0125 (22)
  • 0.013 (30)
  • 0.0135 (20)
  • 0.014 (12)
  • 0.015 (2)
  • 0.0156 (103)
  • 0.0158 (6)
  • 0.0159 (12)
  • 0.016 (72)
  • 0.017 (19)
  • 0.0175 (20)
  • 0.0186 (6)
  • 0.0193 (12)
  • 0.0197 (8)
  • 0.02 (12)
  • 0.021 (3)
  • 0.022 (6)
  • 0.0225 (20)
  • 0.0276 (5)
  • 0.0295 (6)
  • 0.0298 (2)
  • 0.031 (80)
  • 0.0312 (87)
  • 0.0313 (123)
  • 0.0315 (31)
  • 0.0355 (20)
  • 0.0368 (2)
  • 0.0369 (5)
  • 0.0394 (20)
  • 0.0398 (2)
  • 0.0468 (23)
  • 0.0469 (115)
  • 0.047 (106)
  • 0.0472 (16)
  • 0.0492 (18)
  • 0.0516 (4)
  • 0.0553 (2)
  • 0.0591 (18)
  • 0.0597 (2)
  • 0.0625 (118)
  • 0.063 (74)
  • 0.0689 (18)
  • 0.078 (12)
  • 0.0787 (20)
  • 0.0886 (20)
  • 0.0938 (46)
  • 0.094 (48)
  • 0.0984 (8)
  • 0.106 (6)
  • 0.125 (8)
  • 0.126 (26)
  • 0.1563 (14)
  • 0.1575 (12)
  • 0.1969 (2)
  • 0.197 (2)
  • 0.2362 (2)
  • 0.25 (2)
  • 0.312 (18)
  • 0.3125 (2)
  • 0.315 (2)
  • 0.3935 (2)
  • 0.3937 (2)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (71)
  • 241 (14)
  • AC5 (4)
  • CG4 (2)
  • CL4 (56)
  • CM2 (73)
  • CM3 (60)
  • CM4 (32)
  • CM5 (6)
  • CPX (80)
  • CW2 (32)
  • CW2015 (67)
  • CW5025 (73)
  • GH1 (2)
  • GX (38)
  • HCK10 (8)
  • HCK20 (5)
  • HK1500 (57)
  • HK35 (8)
  • HT2 (58)
  • HTX (37)
  • HWK15 (8)
  • K060 (26)
  • K090 (83)
  • K1 (32)
  • K1010P (2)
  • K10M (106)
  • K10P (83)
  • K10U (68)
  • K15 (13)
  • K15U (68)
  • K20K (101)
  • K21 (36)
  • K25M (83)
  • K25P (86)
  • K2885 (18)
  • K313 (155)
  • K35P (60)
  • K420 (95)
  • K45 (29)
  • K4H (15)
  • K6 (1)
  • K68 (155)
  • KB1340 (21)
  • KB1345 (50)
  • KB1610 (44)
  • KB1625 (40)
  • KB1630 (51)
  • KB5610 (40)
  • KB5625 (52)
  • KB5630 (36)
  • KB9610 (62)
  • KB9640 (27)
  • KBH10 (68)
  • KBH10B (43)
  • KBH20 (74)
  • KBH20B (43)
  • KBK35 (14)
  • KC210 (62)
  • KC250 (86)
  • KC5010 (170)
  • KC5020P (17)
  • KC5025 (177)
  • KC5410 (146)
  • KC5510 (88)
  • KC5525 (47)
  • KC710 (53)
  • KC720 (137)
  • KC722 (47)
  • KC730 (156)
  • KC7310 (98)
  • KC732 (98)
  • KC8050 (133)
  • KC810 (153)
  • KC850 (157)
  • KC9010 (90)
  • KC9025 (125)
  • KC910 (141)
  • KC9105 (109)
  • KC9110 (157)
  • KC9120 (114)
  • KC9125 (131)
  • KC9125RR (4)
  • KC9140 (90)
  • KC9145 (84)
  • KC9210 (18)
  • KC9215 (88)
  • KC9225 (123)
  • KC9240 (117)
  • KC9240NEW (117)
  • KC9245 (88)
  • KC9315 (133)
  • KC9320 (143)
  • KC9325 (98)
  • KC935 (151)
  • KC950 (136)
  • KC990 (92)
  • KCD25 (43)
  • KCK05 (123)
  • KCK05B (103)
  • KCK15 (111)
  • KCK15B (125)
  • KCK20 (142)
  • KCK20B (145)
  • KCM15 (111)
  • KCM15B (103)
  • KCM25 (127)
  • KCM25B (113)
  • KCM35 (102)
  • KCM35B (76)
  • KCP05 (101)
  • KCP05B (63)
  • KCP10 (129)
  • KCP10B (157)
  • KCP15 (9)
  • KCP25 (131)
  • KCP25B (157)
  • KCP30 (119)
  • KCP30B (92)
  • KCP40 (82)
  • KCP40B (93)
  • KCPK05 (94)
  • KCS10 (45)
  • KCS10B (127)
  • KCU10 (159)
  • KCU25 (157)
  • KD050 (54)
  • KD081 (60)
  • KD100 (62)
  • KD120 (60)
  • KD1400 (46)
  • KD1405 (34)
  • KD1425 (68)
  • KM1 (32)
  • KMF (14)
  • KT1120 (15)
  • KT125 (59)
  • KT150 (39)
  • KT175 (82)
  • KT315 (115)
  • KT325 (58)
  • KT5020 (3)
  • KTP10 (25)
  • KU10 (17)
  • KU10T (103)
  • KU25T (33)
  • KU30T (139)
  • KY1310 (46)
  • KY1320 (73)
  • KY1540 (32)
  • KY1615 (75)
  • KY2000 (46)
  • KY2100 (26)
  • KY3000 (101)
  • KY3400 (64)
  • KY3500 (85)
  • KY4000 (35)
  • KY4300 (42)
  • KY4400 (73)
  • KYHK15B (73)
  • KYK10 (30)
  • KYK25 (52)
  • KYK35 (85)
  • KYS25 (32)
  • KYS30 (36)
  • MC2 (4)
  • NL200 (32)
  • NL250 (88)
  • NL300 (78)
  • NL400 (38)
  • NL920 (61)
  • P25 (31)
  • PB100 (16)
  • PB170 (20)
  • PB250 (22)
  • PB300 (14)
  • PD100 (8)
  • PD50 (8)
  • PN120 (2)
  • PS5 (35)
  • SP0819 (70)
  • SP0A00 (4)
  • SP0PW3 (6)
  • SP3019 (54)
  • SP4019 (56)
  • SP4036 (3)
  • SP4066 (6)
  • SP4093 (3)
  • SP61EJ (4)
  • SPADAP (18)
  • SPN4W2 (12)
  • SPSREJ (2)
  • THM (75)
  • THM-X (44)
  • THMF-X (18)
  • TN10P (116)
  • TN10U (74)
  • TN15M (106)
  • TN15U (68)
  • TN2000 (75)
  • TN20K (110)
  • TN20P (113)
  • TN30M (109)
  • TN30P (82)
  • TN4000 (67)
  • TN5015 (89)
  • TN5020 (96)
  • TN5105 (59)
  • TN5120 (106)
  • TN6010 (77)
  • TN6025 (90)
  • TN7005 (58)
  • TN7010 (106)
  • TN7015 (106)
  • TN7025 (106)
  • TN7035 (95)
  • TN7105 (60)
  • TN7110 (112)
  • TN7115 (106)
  • TN7125 (100)
  • TN7135 (97)
  • TN8025 (91)
  • TTI15 (48)
  • TTM09 (20)
  • TTR (28)
  • TTR-X (12)
  • TTS (56)
  • TTX (43)
  • W00342 (20)
  • WBH10C (62)
  • WBH10P (36)
  • WBH10U (44)
  • WBH20P (59)
  • WBH25P (40)
  • WBH25U (55)
  • WBH30P (36)
  • WBK40U (21)
  • WBK45U (48)
  • WDN00U (22)
  • WDN25U (46)
  • WK05CT (98)
  • WK15CT (59)
  • WK20CT (113)
  • WM15CT (111)
  • WM25CT (111)
  • WM35CT (88)
  • WP05CT (18)
  • WP15CT (119)
  • WP20TT (5)
  • WP25CT (119)
  • WP35CT (113)
  • WS10PT (94)
  • WS25PT (90)
  • WU10HT (101)
  • WU10PT (11)
  • WU25PT (6)
  • X00511 (14)
Hand Of Tool
  • L (57)
  • N (9)
  • R (56)
Minimum Axial Groove Diameter
  • 0.0 (12)
  • 0.748 (2)
  • 0.7874 (2)
  • 0.9449 (1)
  • 0.9646 (1)
  • 0.9843 (2)
  • 1.2598 (10)
  • 1.3386 (2)
  • 1.5157 (2)
  • 1.5748 (18)
  • 1.626 (2)
  • 1.874 (2)
  • 1.8898 (3)
  • 1.9094 (3)
  • 1.9685 (15)
  • 1.969 (2)
  • 2.0866 (2)
  • 2.252 (2)
  • 2.48 (2)
  • 2.4803 (3)
  • 2.9525 (1)
  • 2.9528 (3)
  • 3.189 (3)
  • 3.5 (2)
  • 3.5433 (9)
  • 4.3307 (26)
  • 4.331 (8)
  • 4.921 (2)
  • 4.9213 (16)
  • 5.5 (2)
  • 6.874 (2)
  • 7.087 (2)
  • 8.252 (2)
  • 8.2677 (2)
  • 8.465 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 19.0 (2)
  • 20.0 (2)
  • 24.0 (1)
  • 24.5 (1)
  • 25.0 (2)
  • 32.0 (10)
  • 34.0 (2)
  • 38.5 (2)
  • 40.0 (18)
  • 41.3 (2)
  • 47.6 (2)
  • 48.0 (3)
  • 48.5 (3)
  • 50.0 (17)
  • 53.0 (2)
  • 57.2 (2)
  • 63.0 (5)
  • 75.0 (4)
  • 81.0 (3)
  • 88.9 (2)
  • 90.0 (9)
  • 110.0 (34)
  • 125.0 (18)
  • 139.7 (2)
  • 174.6 (2)
  • 180.0 (2)
  • 209.6 (2)
  • 215.0 (2)
  • 222.3 (2)
  • 510.0 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (26)
to
Maximum Axial Groove Diameter
  • 393.661 (26)
to
Cutting Direction
  • B (19)
  • E (40)
  • P (2)
  • S (61)
Rake Angle Style
  • DOUBLE NEGATIVE (56)
  • NEGATIVE-ZERO (17)
  • NEUTRAL (ZERO) (24)
Maximum Bore Depth
  • 34.8 (2)
  • 42.0 (2)
  • 48.0 (2)
  • 48.84 (1)
  • 48.87 (1)
  • 52.0 (2)
  • 54.0 (2)
  • 56.0 (2)
  • 62.0 (2)
  • 63.8 (2)
  • 64.0 (4)
  • 64.12 (2)
  • 64.4 (2)
  • 65.0 (54)
  • 72.0 (2)
  • 74.0 (4)
  • 80.0 (5)
  • 80.3 (1)
  • 83.29 (2)
  • 84.0 (6)
  • 94.0 (2)
  • 98.18 (2)
  • 99.32 (2)
  • 105.6 (2)
  • 110.2 (2)
  • 111.0 (1)
  • 111.02 (1)
  • 113.0 (2)
  • 114.0 (4)
  • 114.12 (2)
  • 115.0 (4)
  • 115.1 (2)
  • 120.0 (1)
  • 152.0 (5)
to
Maximum Bore Depth
  • 1.3701 (2)
  • 1.6535 (2)
  • 1.8898 (2)
  • 1.9228 (1)
  • 1.924 (1)
  • 2.0472 (2)
  • 2.126 (2)
  • 2.2047 (2)
  • 2.4409 (2)
  • 2.5118 (2)
  • 2.5197 (4)
  • 2.524 (2)
  • 2.5354 (2)
  • 2.559 (14)
  • 2.5591 (40)
  • 2.8346 (2)
  • 2.9134 (4)
  • 3.1496 (5)
  • 3.1614 (1)
  • 3.279 (2)
  • 3.3071 (6)
  • 3.7008 (2)
  • 3.865 (2)
  • 3.91 (2)
  • 4.1575 (2)
  • 4.3386 (2)
  • 4.3701 (1)
  • 4.3709 (1)
  • 4.4488 (2)
  • 4.4882 (4)
  • 4.493 (2)
  • 4.5276 (4)