successfully added to cart
View Cart

Notifications

Mark all as read

Außen- und Innenbearbeitung

Select Filters
Filters
    • Applied Filters:
    • Clear all filters
  • X First Choice:
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (752)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (752)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (752)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (752)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (752)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (752)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (752)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (752)
  • M Stainless Steel (575)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (575)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (575)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (575)
  • K Cast Iron (491)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (491)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (491)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (491)
  • N Non-Ferrous Materials (228)
    • N1
      Wrought Aluminum
      (181)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (228)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (126)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (228)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (228)
    • N6
      Carbon, Graphite Composites, CFRP
      (201)
    • N7
      MMC's
      (181)
  • S High-Temp Alloys (560)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (560)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (560)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (560)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (464)
  • H Hardened Materials (164)
    • H1
      Hardened Materials 44-48 HRC
      (164)
    • H2
      Hardened Materials 48-55 HRC
      (164)
    • H3
      Hardened Materials 56-60 HRC
      (164)
    • H4
      Hardened Materials >60 HRC
      (157)
Select First Choice
  • BR (155)
  • CN (896)
  • DE (940)
  • GB (595)
  • IN (437)
  • SG (401)
  • US (1003)
Applications
Applications
  • Back Boring Back Boring (17)
  • Facing Facing (47)
  • ID Thread Turning ID Thread Turning (26)
  • Multiple Direction Cutting Multiple Direction Cutting (178)
  • Profiling Profiling (173)
  • TRN Boring TRN Boring (70)
  • Turning Turning (107)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (397)
  • Interrupted (85)
  • Lightly Interrupted Cut (549)
  • Smooth Cut (898)
  • Varying Depth of Cut (606)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (12)
  • 63.0 (2)
  • 72.5 (6)
  • 75.0 (4)
  • 90.0 (1)
  • 93.0 (79)
  • 95.0 (78)
  • 107.5 (2)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (74)
  • Toolholder (109)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 0.0 (756)
  • 1.0 (128)
  • 2.0 (139)
  • 3.0 (23)
  • 4.0 (98)
  • 6.0 (25)
  • 8.0 (50)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (14)
  • 0.008 in (47)
  • 0.016 in (174)
  • 0.03 in (27)
  • 0.031 in (288)
  • 0.038 in (73)
  • 0.047 in (179)
  • 0.063 in (49)
  • 0.094 in (3)
  • 0.1 in (141)
  • 0.102 in (38)
  • 0.125 in (2)
  • 0.2 in (142)
  • 0.203 in (83)
  • 0.34 in (14)
  • 0.397 in (157)
  • 0.4 in (177)
  • 0.406 in (1)
  • 0.6 in (16)
  • 0.79 in (5)
  • 0.791 in (12)
  • 0.792 in (38)
  • 0.794 in (134)
  • 0.8 in (182)
  • 1.188 in (18)
  • 1.19 in (24)
  • 1.191 in (92)
  • 1.2 in (142)
  • 1.587 in (24)
  • 1.588 in (53)
  • 1.6 in (81)
  • 2.38 in (5)
  • 2.4 in (15)
  • 3.2 in (6)
  • 4.0 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.03 mm (27)
  • 0.038 mm (73)
  • 0.1 mm (155)
  • 0.102 mm (38)
  • 0.2 mm (189)
  • 0.203 mm (83)
  • 0.34 mm (14)
  • 0.397 mm (157)
  • 0.4 mm (351)
  • 0.406 mm (1)
  • 0.6 mm (16)
  • 0.79 mm (5)
  • 0.791 mm (12)
  • 0.792 mm (38)
  • 0.794 mm (134)
  • 0.8 mm (470)
  • 1.188 mm (18)
  • 1.19 mm (24)
  • 1.191 mm (92)
  • 1.2 mm (142)
  • 1.201 mm (179)
  • 1.587 mm (24)
  • 1.588 mm (53)
  • 1.6 mm (130)
  • 2.375 mm (2)
  • 2.38 mm (5)
  • 2.4 mm (15)
  • 2.401 mm (1)
  • 3.176 mm (2)
  • 3.2 mm (6)
  • 4.0 mm (1)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (756)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (756)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
Drilling Condition
  • Heavily Interrupted Cut (213)
  • Interrupted (8)
  • Lightly Interrupted Cut (365)
  • Smooth Cut (714)
  • Varying Depth of Cut (422)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (63)
  • 241 (24)
  • CL4 (47)
  • CM2 (62)
  • CM3 (47)
  • CM4 (35)
  • CPX (52)
  • CW2 (39)
  • GH1 (13)
  • GH2 (5)
  • GX (32)
  • HT2 (124)
  • HTX (105)
  • K060 (30)
  • K090 (65)
  • K1 (27)
  • K1010P (13)
  • K10M (157)
  • K10P (117)
  • K10U (152)
  • K110M (7)
  • K15U (145)
  • K20K (130)
  • K21 (33)
  • K25M (132)
  • K25P (120)
  • K313 (181)
  • K35P (42)
  • K420 (51)
  • K45 (42)
  • K68 (148)
  • KB1340 (36)
  • KB1345 (51)
  • KB1610 (117)
  • KB1625 (68)
  • KB1630 (57)
  • KB5610 (111)
  • KB5625 (101)
  • KB5630 (94)
  • KB9610 (131)
  • KB9640 (52)
  • KBH10 (145)
  • KBH10B (51)
  • KBH20 (157)
  • KBH20B (51)
  • KBK35 (24)
  • KC210 (46)
  • KC250 (37)
  • KC5010 (184)
  • KC5020P (53)
  • KC5025 (184)
  • KC5410 (201)
  • KC5510 (96)
  • KC5525 (69)
  • KC710 (24)
  • KC720 (147)
  • KC722 (24)
  • KC725M (37)
  • KC730 (169)
  • KC7310 (96)
  • KC732 (142)
  • KC8050 (179)
  • KC810 (169)
  • KC850 (176)
  • KC9010 (149)
  • KC9025 (182)
  • KC910 (169)
  • KC9105 (176)
  • KC9110 (179)
  • KC9120 (128)
  • KC9125 (179)
  • KC9125RR (5)
  • KC9140 (96)
  • KC9145 (80)
  • KC915M (12)
  • KC9210 (14)
  • KC9215 (96)
  • KC9225 (179)
  • KC9240 (179)
  • KC9240NEW (179)
  • KC9245 (96)
  • KC9315 (179)
  • KC9320 (179)
  • KC9325 (137)
  • KC935 (184)
  • KC950 (149)
  • KC990 (147)
  • KCD25 (61)
  • KCK05 (205)
  • KCK05B (154)
  • KCK15 (177)
  • KCK15B (163)
  • KCK20 (211)
  • KCK20B (179)
  • KCM15 (177)
  • KCM15B (194)
  • KCM25 (179)
  • KCM25B (239)
  • KCM35 (156)
  • KCM35B (108)
  • KCP05 (175)
  • KCP05B (112)
  • KCP10 (179)
  • KCP10B (277)
  • KCP15 (13)
  • KCP25 (182)
  • KCP25B (303)
  • KCP30 (177)
  • KCP30B (95)
  • KCP40 (69)
  • KCP40B (105)
  • KCPK05 (87)
  • KCS10 (146)
  • KCS10B (168)
  • KCU10 (322)
  • KCU25 (275)
  • KD050 (88)
  • KD081 (88)
  • KD100 (49)
  • KD120 (42)
  • KD1400 (126)
  • KD1405 (49)
  • KD1425 (126)
  • KM1 (31)
  • KMF (24)
  • KS15 (24)
  • KT1120 (36)
  • KT125 (69)
  • KT150 (42)
  • KT175 (135)
  • KT315 (175)
  • KT325 (127)
  • KT5020 (13)
  • KTP10 (78)
  • KU10 (73)
  • KU10T (170)
  • KU30T (179)
  • KY1310 (52)
  • KY1320 (80)
  • KY1540 (31)
  • KY1615 (63)
  • KY2000 (37)
  • KY2100 (29)
  • KY3000 (65)
  • KY3400 (55)
  • KY3500 (81)
  • KY4000 (46)
  • KY4300 (31)
  • KY4400 (79)
  • KYHK15B (79)
  • KYK10 (46)
  • KYK25 (54)
  • KYK35 (81)
  • KYS25 (31)
  • KYS30 (47)
  • NL200 (38)
  • NL250 (88)
  • NL300 (59)
  • NL400 (48)
  • NL920 (84)
  • P25 (29)
  • PS5 (45)
  • SP0819 (64)
  • SP3019 (68)
  • SP4019 (64)
  • SP4036 (12)
  • SP4093 (12)
  • SP61EJ (5)
  • SP7779 (5)
  • SPADAP (3)
  • SPSREJ (1)
  • TN7035 (1)
  • X00511 (24)
  • YY3A00 (1)
Hand Of Tool
Hand Of Tool
  • L (67)
  • N (12)
  • R (104)
Wiper Insert
Wiper Insert
  • N (936)
  • Y (114)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 13.0 mm (5)
  • 16.0 mm (5)
  • 20.0 mm (9)
  • 25.0 mm (9)
  • 27.0 mm (2)
  • 32.0 mm (15)
  • 40.0 mm (16)
  • 50.0 mm (14)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.512 in (5)
  • 0.63 in (5)
  • 0.787 in (9)
  • 0.984 in (9)
  • 1.063 in (2)
  • 1.26 in (15)
  • 1.575 in (16)
  • 1.969 in (14)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (77)
  • E (28)
  • S (78)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (88)
  • NEGATIVE-ZERO (31)
  • NEUTRAL (ZERO) (60)
  • POSITIVE-NEGATIVE (4)
Maximum Bore Depth
Maximum Bore Depth
  • 1.575 in (5)
  • 1.891 in (5)
  • 2.52 in (11)
  • 3.15 in (9)
  • 3.938 in (15)
  • 5.039 in (17)
  • 6.299 in (13)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 40.0 mm (5)
  • 48.0 mm (5)
  • 64.0 mm (11)
  • 80.0 mm (9)
  • 100.0 mm (15)
  • 128.0 mm (17)
  • 160.0 mm (13)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (74)
frontEnd
Clamp Style
Clamp Style
  • D (72)
  • P (24)
  • S (88)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (292)
  • D-DIAMOND/RHOMBIC 55 (220)
  • S-SQUARE 90 (97)
  • T-TRIANGLE 60 (123)
  • V-DIAMOND/RHOMBIC 35 (119)
  • W-TRIGON 80 (89)
insertGeometry
Shape
Shape
  • C-DIAMOND/RHOMBIC 80 (241)
  • D-DIAMOND/RHOMBIC 55 (171)
  • S-SQUARE 90 (83)
  • T-TRIANGLE 60 (121)
  • V-DIAMOND/RHOMBIC 35 (80)
  • W-TRIGON 80 (60)
Insert IC Size
Insert IC Size
  • 5.551 mm (3)
  • 6.351 mm (65)
  • 9.525 mm (253)
  • 12.701 mm (339)
  • 15.875 mm (53)
  • 19.05 mm (43)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.219 in (3)
  • 0.25 in (65)
  • 0.375 in (253)
  • 0.5 in (339)
  • 0.625 in (53)
  • 0.75 in (43)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.45 mm (21)
  • 6.476 mm (3)
  • 6.525 mm (13)
  • 7.75 mm (15)
  • 8.675 mm (47)
  • 9.525 mm (13)
  • 9.625 mm (3)
  • 9.675 mm (47)
  • 10.951 mm (3)
  • 11.0 mm (14)
  • 11.076 mm (9)
  • 11.601 mm (3)
  • 11.625 mm (51)
  • 12.701 mm (43)
  • 12.9 mm (107)
  • 15.5 mm (102)
  • 15.875 mm (14)
  • 16.125 mm (35)
  • 16.5 mm (62)
  • 16.6 mm (64)
  • 19.05 mm (13)
  • 19.35 mm (28)
  • 22.0 mm (36)
  • 22.151 mm (4)
  • 27.5 mm (4)
  • 33.0 mm (2)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.01 in (37)
  • 0.012 in (15)
  • 0.014 in (47)
  • 0.015 in (63)
  • 0.017 in (26)
  • 0.019 in (54)
  • 0.02 in (150)
  • 0.024 in (102)
  • 0.025 in (49)
  • 0.027 in (126)
  • 0.03 in (41)
  • 0.034 in (40)
  • 0.042 in (4)
  • 0.052 in (2)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • FN (59)
  • FP (93)
  • FS (1)
  • HP (60)
  • LF (41)
  • MF (39)
  • MN (82)
  • MP (95)
  • MS (79)
  • RP (158)
Cutting Tool Material
Cutting Tool Material
  • B H (125)
  • B L (157)
  • C A (81)
  • C N (81)
  • D P (140)
  • H T (175)
  • H W (929)
Tolerance Class
Tolerance Class
  • G (107)
  • M (649)
backEnd
Connection Type
Connection Type
  • BORING BAR (74)
  • SQUARE SHANK (109)
Back-End Diameter
Back-End Diameter
  • 10.0 mm (5)
  • 12.0 mm (5)
  • 16.0 mm (11)
  • 20.0 mm (9)
  • 25.0 mm (15)
  • 32.0 mm (17)
  • 40.0 mm (13)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.394 in (5)
  • 0.473 in (5)
  • 0.63 in (11)
  • 0.787 in (9)
  • 0.984 in (15)
  • 1.26 in (17)
  • 1.575 in (13)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
    • Applied Filters:
    • Clear all filters
  • X First Choice:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Kenclamp™ Bohrstangen

Negative Kenloc™ Wendeschneidplatten
(7 Products)
  • I.D. TurningI.D. Turning
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • Back BoringBack Boring
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
2441940 A25RDDUNL11KC04 A25RDDUNL11KC04 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT -5.000 DN..110408   15 IP  
    List price:
    $319.21 /each.
    Your price::
    Qty
    2441939 A25RDDUNR11KC04 A25RDDUNR11KC04   25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT -5.000 DN..110408   15 IP
      List price:
      $319.21 /each.
      Your price::
      Qty
      2441946 A32SDDUNL15KC06 A32SDDUNL15KC06 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT -6.000 DN..150608 15 IP 15 IP  
        List price:
        $360.49 /each.
        Your price::
        Qty
        2441941 A32SDDUNR11KC04 A32SDDUNR11KC04 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT -5.000 DN..110408 15 IP 15 IP  
          List price:
          $360.49 /each.
          Your price::
          Qty
          2441945 A32SDDUNR15KC06 A32SDDUNR15KC06 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT -6.000 DN..150608 15 IP 15 IP  
            List price:
            $360.49 /each.
            Your price::
            Qty
            2441947 A40TDDUNR15KC06 A40TDDUNR15KC06 40.0 1.575 50.0000 1.969 27.0000 1.063 300.0000 11.811 1/4-18 NPT -5.000 DN..150608 15 IP 15 IP  
              List price:
              $408.31 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              Kenclamp™ Bohrstangen

              Kenloc™ Wendeschneidplatten
              (4 Products)
              • I.D. TurningI.D. Turning
              • Back BoringBack Boring
              • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
              2441917 A32SDVUNL16KC04 A32SDVUNL16KC04 32.0 1.26 40.0000 1.574 22.0000 .8661 250.0000 9.842 1/4-18 NPT -3.000 VN..160408 15 IP 15 IP  
                List price:
                $349.01 /each.
                Your price::
                Qty
                2441916 A32SDVUNR16KC04 A32SDVUNR16KC04   32.0 1.26 40.0000 1.574 22.0000 .8661 250.0000 9.842 1/4-18 NPT -3.000 VN..160408 15 IP 15 IP
                  List price:
                  $349.01 /each.
                  Your price::
                  Qty
                  2441919 A40TDVUNL16KC04 A40TDVUNL16KC04 40.0 1.574 50.0000 1.968 27.0000 1.063 300.0000 11.811 1/4-18 NPT -3.000 VN..160408 15 IP 15 IP  
                    List price:
                    $395.64 /each.
                    Your price::
                    Qty
                    2441918 A40TDVUNR16KC04 A40TDVUNR16KC04 40.0 1.57 50.0000 1.968 27.0000 1.063 300.0000 11.811 1/4-18 NPT -3.000 VN..160408 15 IP 15 IP  
                      List price:
                      $395.64 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty

                      Sold in pkg. of

                      ORIGINAL PRODUCT

                      Kenclamp™ Bohrstangen

                      Negative Kenloc™ Wendeschneidplatten
                      (6 Products)
                      • I.D. TurningI.D. Turning
                      • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
                      2441924 A25RDWLNL08KC04 A25RDWLNL08KC04 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT WN..080408   15 IP  
                        List price:
                        $290.26 /each.
                        Your price::
                        Qty
                        2441921 A25RDWLNR06KC04 A25RDWLNR06KC04   25.0 .984 32.0000 1.260 17.0000 .6690 200.0100 7.874 1/4-18 NPT WN..060408   15 IP
                          List price:
                          $290.26 /each.
                          Your price::
                          Qty
                          2441923 A25RDWLNR08KC04 A25RDWLNR08KC04 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 1/4-18 NPT WN..080408   15 IP  
                            List price:
                            $290.26 /each.
                            Your price::
                            Qty
                            2441926 A32SDWLNL08KC04 A32SDWLNL08KC04 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT WN..080408 15 IP 15 IP  
                              List price:
                              $320.18 /each.
                              Your price::
                              Qty
                              2441925 A32SDWLNR08KC04 A32SDWLNR08KC04 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 1/4-18 NPT WN..080408 15 IP 15 IP  
                                List price:
                                $320.18 /each.
                                Your price::
                                Qty
                                2441927 A40TDWLNR08KC04 A40TDWLNR08KC04 40.0 1.575 50.0000 1.969 27.0000 1.063 300.0000 11.811 1/4-18 NPT WN..080408 15 IP 15 IP  
                                  List price:
                                  $365.20 /each.
                                  Your price::
                                  Qty
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty

                                  Sold in pkg. of

                                  ORIGINAL PRODUCT

                                  Kenclamp™ Bohrstangen

                                  Negative Kenloc™ Wendeschneidplatten
                                  (6 Products)
                                  • I.D. TurningI.D. Turning
                                  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size Gage Insert Shim Screw ID Drive Size Clamp Screw ID Drive Size
                                  2441930 A25RDCLNL12KC04 A25RDCLNL12KC04 25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 6.4000 .2520 1/4-18 NPT CN.120408 15 IP 15 IP  
                                    List price:
                                    $299.73 /each.
                                    Your price::
                                    Qty
                                    2441867 A25RDCLNR12KC04 A25RDCLNR12KC04   25.0 .984 32.0000 1.260 17.0000 .6690 200.0000 7.874 6.4000 .2520 1/4-18 NPT CN.120408 15 IP 15 IP
                                      List price:
                                      $299.73 /each.
                                      Your price::
                                      Qty
                                      2441932 A32SDCLNL12KC04 A32SDCLNL12KC04 32.0 1.26 40.0000 1.575 22.0000 .8660 250.0000 9.843 6.4000 .2520 1/4-18 NPT CN.120408 15 IP 15 IP