successfully added to cart
View Cart
Read More

In Verbindung mit unseren Anschraubköpfen bieten die vibrationsfreien Bohrstangen Stabilität und Steifigkeit beim Bohren an verlängerten Überhängen bis zu 10 x D.

Vibrationsfreie Bohrstangen sind eine Plug-and-Play-Lösung, die für den sofortigen Einsatz entwickelt wurde, ohne dass eine manuelle Einstellung erforderlich oder möglich ist. Das interne Dämpfungssystem gewährleistet Prozessstabilität durch die erhöhte Steifigkeit der Bohrstange und die Dämpfung von Rattern.   Bei diesen vibrationsfreien Bohrstangen kommt ein neues Sortiment von anschraubbaren Schneidköpfen zum Einsatz, die durch eine Verzahnung charakterisiert ist.

Anschraubköpfe in kurzer Ausführung

Anschraubköpfe in kurzer Ausführung

Kurze anschraubbare Schneidköpfe sorgen für geringes Gewicht, hohe Stabilität
und konstante Wiederholgenauigkeit.

Innerer Dämpfungseinsatz

Innerer Dämpfungseinsatz

Das Dämpfungssystem sorgt für eine vibrations- und ratterfreie Bearbeitung und ermöglicht ein hohes Zerspanungsvolumen und große Schnitttiefen, wodurch hohe Oberflächengüte und erhöhte Produktivität erreicht werden.

Schnittstelle mit Verzahnung

Schnittstelle mit Verzahnung

Sorgt für eine sichere Verbindung
und präzisere Wendeplattenpositionierung.

Köpfe für Top Notch Wendeschneidplatten und LT-Gewindewendeschneidplatten

NEU!

NEU!

Schneidköpfe für Screw-On Wendeschneidplatten

Schneidköpfe für Wendeschneidplatten Typ D

Schneidköpfe für Wendeschneidplatten Typ P

Vibrationsfreie Bohrstangen-Produkte ansehen

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • ID Grooving ID Grooving (11)
  • ID Thread Turning ID Thread Turning (11)
  • TRN Boring TRN Boring (11)
Workpiece Material
  • P Steel (104)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (104)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (104)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (104)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (104)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (104)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (104)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (104)
  • M Stainless Steel (104)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (104)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (104)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (104)
  • K Cast Iron (104)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (104)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (104)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (104)
  • N Non-Ferrous Materials (99)
    • N1
      Wrought Aluminum
      (99)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (99)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (73)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (99)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (99)
    • N6
      Carbon, Graphite Composites, CFRP
      (93)
    • N7
      MMC's
      (99)
  • S High-Temp Alloys (104)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (104)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (104)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (104)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (104)
  • H Hardened Materials (93)
    • H1
      Hardened Materials 44-48 HRC
      (93)
    • H2
      Hardened Materials 48-55 HRC
      (86)
    • H3
      Hardened Materials 56-60 HRC
      (86)
    • H4
      Hardened Materials >60 HRC
      (76)
Type of Thread
  • 55 (6)
  • 60 (16)
  • ACME (17)
  • API (13)
  • API BUTTRESS (2)
  • API RD (13)
  • BSPT (4)
  • BSW (14)
  • BUTTRESS (10)
  • M (14)
  • NPT (12)
  • NPTF (4)
  • RD DIN 405 (6)
  • STUB ACME (14)
  • TR DIN 103 (6)
  • UN (14)
  • UNJ (12)
Cutting Condition
  • Heavily Interrupted Cut (97)
  • Interrupted (46)
  • Lightly Interrupted Cut (97)
  • Smooth Cut (97)
  • Varying Depth of Cut (97)
Cutting Condition Material
  • H-All (83)
  • K-All (97)
  • K1 (16)
  • M-All (97)
  • N-All (87)
  • P-All (97)
  • S-All (95)
  • S2 (46)
  • S4 (22)
Tool Cutting Edge Angle
  • 45.0 (2)
  • 62.5 (2)
  • 90.0 (34)
  • 93.0 (34)
  • 95.0 (32)
to
Connection Style
  • Bolt-On Head (104)
Cutting Edges Per Insert
  • 1.0 (68)
  • 2.0 (73)
  • 3.0 (27)
  • 4.0 (46)
  • 6.0 (14)
  • 8.0 (24)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.03 (14)
  • 0.038 (32)
  • 0.051 (7)
  • 0.057 (5)
  • 0.066 (8)
  • 0.07 (4)
  • 0.076 (14)
  • 0.08 (12)
  • 0.081 (4)
  • 0.094 (8)
  • 0.097 (9)
  • 0.1 (62)
  • 0.102 (34)
  • 0.116 (3)
  • 0.117 (5)
  • 0.127 (8)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.15 (8)
  • 0.152 (4)
  • 0.155 (8)
  • 0.157 (8)
  • 0.16 (6)
  • 0.165 (10)
  • 0.173 (8)
  • 0.178 (8)
  • 0.19 (10)
  • 0.191 (10)
  • 0.198 (8)
  • 0.2 (74)
  • 0.202 (8)
  • 0.203 (46)
  • 0.21 (4)
  • 0.224 (8)
  • 0.235 (8)
  • 0.244 (3)
  • 0.25 (8)
  • 0.251 (8)
  • 0.254 (10)
  • 0.269 (8)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (8)
  • 0.305 (2)
  • 0.315 (9)
  • 0.318 (10)
  • 0.33 (8)
  • 0.34 (16)
  • 0.343 (2)
  • 0.356 (8)
  • 0.394 (4)
  • 0.397 (70)
  • 0.4 (84)
  • 0.404 (8)
  • 0.406 (29)
  • 0.43 (8)
  • 0.432 (2)
  • 0.445 (10)
  • 0.472 (3)
  • 0.49 (8)
  • 0.508 (8)
  • 0.52 (1)
  • 0.565 (1)
  • 0.57 (5)
  • 0.572 (10)
  • 0.575 (5)
  • 0.65 (1)
  • 0.7 (4)
  • 0.787 (8)
  • 0.791 (4)
  • 0.792 (20)
  • 0.794 (70)
  • 0.8 (84)
  • 0.826 (1)
  • 0.902 (10)
  • 0.93 (2)
  • 0.99 (1)
  • 1.0 (8)
  • 1.188 (10)
  • 1.19 (12)
  • 1.191 (56)
  • 1.194 (8)
  • 1.195 (5)
  • 1.2 (76)
  • 1.25 (8)
  • 1.5 (8)
  • 1.585 (8)
  • 1.587 (12)
  • 1.588 (34)
  • 1.59 (1)
  • 1.6 (46)
  • 1.75 (8)
  • 1.98 (5)
  • 1.981 (8)
  • 2.0 (10)
  • 2.25 (10)
  • 2.38 (6)
  • 2.381 (2)
  • 2.388 (10)
  • 2.39 (1)
  • 2.4 (20)
  • 2.5 (2)
  • 3.175 (2)
  • 3.18 (3)
  • 3.2 (8)
to
Corner Radius
  • 0.001 (8)
  • 0.0011 (2)
  • 0.0012 (4)
  • 0.0015 (32)
  • 0.002 (7)
  • 0.0023 (5)
  • 0.0026 (8)
  • 0.0028 (4)
  • 0.003 (14)
  • 0.0031 (8)
  • 0.0032 (4)
  • 0.0037 (8)
  • 0.0038 (9)
  • 0.004 (74)
  • 0.0046 (8)
  • 0.005 (8)
  • 0.0052 (8)
  • 0.0053 (8)
  • 0.0059 (8)
  • 0.006 (12)
  • 0.0062 (8)
  • 0.0063 (4)
  • 0.0065 (10)
  • 0.0068 (8)
  • 0.007 (8)
  • 0.0075 (10)
  • 0.0078 (8)
  • 0.0079 (3)
  • 0.008 (74)
  • 0.0083 (16)
  • 0.0088 (8)
  • 0.0093 (8)
  • 0.0096 (3)
  • 0.0099 (8)
  • 0.01 (10)
  • 0.0106 (8)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (8)
  • 0.012 (2)
  • 0.0124 (8)
  • 0.0125 (10)
  • 0.013 (16)
  • 0.0135 (10)
  • 0.014 (8)
  • 0.0155 (4)
  • 0.0156 (84)
  • 0.0159 (8)
  • 0.016 (55)
  • 0.017 (10)
  • 0.0175 (10)
  • 0.0186 (3)
  • 0.0193 (8)
  • 0.02 (9)
  • 0.0225 (10)
  • 0.026 (1)
  • 0.0276 (4)
  • 0.031 (52)
  • 0.0311 (4)
  • 0.0312 (70)
  • 0.0313 (84)
  • 0.0315 (6)
  • 0.0325 (1)
  • 0.0355 (10)
  • 0.0368 (2)
  • 0.039 (1)
  • 0.0394 (8)
  • 0.0468 (10)
  • 0.0469 (76)
  • 0.047 (52)
  • 0.0492 (8)
  • 0.0591 (8)
  • 0.0625 (56)
  • 0.063 (40)
  • 0.0689 (8)
  • 0.078 (8)
  • 0.0787 (10)
  • 0.0886 (10)
  • 0.0938 (22)
  • 0.094 (16)
  • 0.0984 (2)
  • 0.106 (5)
  • 0.125 (4)
  • 0.126 (6)
  • 0.1563 (12)
  • 0.312 (8)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (46)
  • 241 (12)
  • CL4 (32)
  • CM2 (44)
  • CM3 (34)
  • CM4 (28)
  • CPX (42)
  • CW2 (30)
  • GH1 (8)
  • GX (16)
  • HT2 (54)
  • HTX (50)
  • K060 (24)
  • K090 (46)
  • K1 (16)
  • K1010P (8)
  • K10M (74)
  • K10P (60)
  • K10U (66)
  • K15U (66)
  • K20K (66)
  • K21 (26)
  • K25M (60)
  • K25P (52)
  • K2885 (8)
  • K313 (92)
  • K35P (28)
  • K420 (49)
  • K45 (30)
  • K4H (8)
  • K68 (91)
  • KB1340 (16)
  • KB1345 (48)
  • KB1610 (50)
  • KB1625 (44)
  • KB1630 (44)
  • KB5610 (44)
  • KB5625 (62)
  • KB5630 (38)
  • KB9610 (62)
  • KB9640 (16)
  • KBH10 (60)
  • KBH10B (36)
  • KBH20 (62)
  • KBH20B (36)
  • KBK35 (12)
  • KC210 (26)
  • KC250 (32)
  • KC5010 (101)
  • KC5020P (18)
  • KC5025 (102)
  • KC5410 (86)
  • KC5510 (52)
  • KC5525 (30)
  • KC710 (28)
  • KC720 (82)
  • KC722 (26)
  • KC730 (95)
  • KC7310 (54)
  • KC732 (74)
  • KC8050 (84)
  • KC810 (91)
  • KC850 (95)
  • KC9010 (72)
  • KC9025 (86)
  • KC910 (84)
  • KC9105 (83)
  • KC9110 (96)
  • KC9120 (78)
  • KC9125 (86)
  • KC9140 (54)
  • KC9145 (32)
  • KC9210 (8)
  • KC9215 (54)
  • KC9225 (86)
  • KC9240 (84)
  • KC9240NEW (84)
  • KC9245 (54)
  • KC9315 (86)
  • KC9320 (92)
  • KC9325 (72)
  • KC935 (96)
  • KC950 (82)
  • KC990 (76)
  • KCD25 (28)
  • KCK05 (86)
  • KCK05B (74)
  • KCK15 (76)
  • KCK15B (82)
  • KCK20 (94)
  • KCK20B (92)
  • KCM15 (84)
  • KCM15B (78)
  • KCM25 (86)
  • KCM25B (82)
  • KCM35 (76)
  • KCM35B (58)
  • KCP05 (80)
  • KCP05B (50)
  • KCP10 (86)
  • KCP10B (94)
  • KCP15 (4)
  • KCP25 (86)
  • KCP25B (94)
  • KCP30 (84)
  • KCP30B (50)
  • KCP40 (42)
  • KCP40B (50)
  • KCPK05 (40)
  • KCS10 (44)
  • KCS10B (68)
  • KCU10 (97)
  • KCU25 (93)
  • KD050 (47)
  • KD081 (52)
  • KD100 (31)
  • KD120 (40)
  • KD1400 (56)
  • KD1405 (22)
  • KD1425 (64)
  • KM1 (24)
  • KMF (12)
  • KT1120 (16)
  • KT125 (46)
  • KT150 (28)
  • KT175 (68)
  • KT315 (88)
  • KT325 (64)
  • KT5020 (14)
  • KTP10 (30)
  • KU10 (24)
  • KU10T (84)
  • KU25T (14)
  • KU30T (92)
  • KY1310 (30)
  • KY1320 (46)
  • KY1540 (18)
  • KY1615 (46)
  • KY2000 (32)
  • KY2100 (14)
  • KY3000 (56)
  • KY3400 (34)
  • KY3500 (46)
  • KY4000 (22)
  • KY4300 (22)
  • KY4400 (46)
  • KYHK15B (46)
  • KYK10 (24)
  • KYK25 (34)
  • KYK35 (46)
  • KYS25 (16)
  • KYS30 (16)
  • NL200 (20)
  • NL250 (50)
  • NL300 (42)
  • NL400 (20)
  • NL920 (38)
  • P25 (14)
  • PS5 (24)
  • SP0819 (40)
  • SP3019 (32)
  • SP4019 (28)
  • SP4036 (4)
  • SP4093 (4)
  • SPADAP (2)
  • TN7035 (10)
  • X00511 (12)
  • YY3A00 (2)
Hand Of Tool
  • L (47)
  • R (57)
Minimum Axial Groove Diameter
  • 1.2598 (19)
  • 1.2993 (2)
  • 1.5748 (24)
  • 1.9685 (29)
  • 2.4803 (30)
to
Minimum Axial Groove Diameter
  • 32.0 (19)
  • 33.0 (2)
  • 40.0 (24)
  • 50.0 (29)
  • 63.0 (30)
to
Maximum Axial Groove Diameter
  • 9999.0 (10)
to
Maximum Axial Groove Diameter
  • 393.661 (10)
to
Cutting Direction
  • B (32)
  • E (52)
  • P (2)
  • S (18)
Rake Angle Style
  • DOUBLE NEGATIVE (61)
  • NEGATIVE-ZERO (30)
  • NEUTRAL (ZERO) (13)
Maximum Bore Depth
  • 100.0 (21)
  • 128.0 (24)
  • 160.0 (29)
  • 200.0 (30)
to
Maximum Bore Depth
  • 3.92 (21)
  • 5.04 (24)
  • 6.28 (29)
  • 7.88 (30)
to
Boring Bar Material
  • S (104)
Wiper Insert
  • N (104)
  • Y (44)
frontEnd
Adapter Front-End
  • BORING BAR ADAPTER (25)
Clamp Style
  • D (28)
  • N (11)
  • P (26)
  • S (39)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (26)
  • D-DIAMOND/RHOMBIC 55 (28)
  • LT-TRIANGLE LAY DOWN THREAD 60 (7)
  • T-TRIANGLE 60 (18)
  • TN-TOP NOTCH (11)
  • V-DIAMOND/RHOMBIC 35 (10)
  • W-TRIGON 80 (4)
Front End Type
  • ZYL - Cylindrical Adapter (25)
Cutting Width
  • 1.0 (8)
  • 1.19 (5)
  • 1.194 (8)
  • 1.2 (8)
  • 1.5 (8)
  • 1.57 (8)
  • 1.575 (8)
  • 1.75 (8)
  • 1.829 (8)
  • 1.981 (8)
  • 2.0 (8)
  • 2.2 (8)
  • 2.235 (8)
  • 2.24 (3)
  • 2.25 (5)
  • 2.388 (8)
  • 2.39 (5)
  • 2.464 (8)
  • 2.5 (8)
  • 2.667 (8)
  • 2.743 (8)
  • 2.75 (8)
  • 2.794 (8)
  • 2.997 (8)
  • 3.0 (10)
  • 3.099 (8)
  • 3.17 (8)
  • 3.175 (10)
  • 3.18 (1)
  • 3.2 (10)
  • 3.25 (8)
  • 3.251 (8)
  • 3.32 (3)
  • 3.329 (3)
  • 3.5 (10)
  • 3.607 (8)
  • 3.96 (8)
  • 3.962 (8)
  • 3.974 (3)
  • 3.988 (8)
  • 4.0 (10)
  • 4.24 (5)
  • 4.242 (10)
  • 4.25 (3)
  • 4.3 (8)
  • 4.5 (10)
  • 4.521 (8)
  • 4.699 (9)
  • 4.775 (10)
  • 4.78 (1)
  • 4.785 (1)
  • 4.788 (1)
  • 4.8 (8)
  • 4.801 (10)
  • 4.81 (8)
  • 4.88 (3)
  • 4.95 (8)
  • 5.0 (2)
  • 5.004 (2)
  • 5.131 (2)
  • 5.41 (2)
  • 5.5 (2)
  • 5.537 (1)
  • 5.563 (2)
  • 6.0 (2)
  • 6.35 (3)
  • 6.36 (1)
  • 6.48 (2)
  • 7.137 (1)
  • 7.925 (1)
  • 9.525 (1)
  • 9.73 (1)
to
Cutting Width
  • 0.0394 (8)
  • 0.047 (8)
  • 0.0472 (8)
  • 0.0591 (8)
  • 0.062 (8)
  • 0.0689 (8)
  • 0.072 (8)
  • 0.078 (8)
  • 0.0787 (8)
  • 0.079 (3)
  • 0.0866 (8)
  • 0.088 (8)
  • 0.0886 (5)
  • 0.094 (8)
  • 0.097 (8)
  • 0.0984 (8)
  • 0.105 (8)
  • 0.108 (8)
  • 0.1083 (8)
  • 0.11 (8)
  • 0.118 (8)
  • 0.1181 (10)
  • 0.122 (8)
  • 0.125 (10)
  • 0.126 (10)
  • 0.128 (8)
  • 0.131 (3)
  • 0.1378 (10)
  • 0.142 (8)
  • 0.156 (8)
  • 0.157 (8)
  • 0.1574 (10)
  • 0.1575 (10)
  • 0.167 (10)
  • 0.1673 (3)
  • 0.169 (8)
  • 0.1771 (10)
  • 0.1772 (10)
  • 0.178 (8)
  • 0.185 (9)
  • 0.188 (10)
  • 0.189 (10)
  • 0.192 (3)
  • 0.195 (8)
  • 0.1969 (2)
  • 0.197 (2)
  • 0.202 (2)
  • 0.213 (2)
  • 0.2165 (2)
  • 0.2166 (1)
  • 0.218 (1)
  • 0.219 (2)
  • 0.2362 (2)
  • 0.25 (3)
  • 0.255 (2)
  • 0.281 (1)
  • 0.312 (1)