successfully added to cart
View Cart

Top Notch™ Einstechdrehen

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Face Grooving Face Grooving (591)
  • Grooving Grooving (504)
  • ID Facing ID Facing (9)
  • ID Grooving ID Grooving (317)
  • ID Thread Turning ID Thread Turning (96)
  • OD Thread Turning OD Thread Turning (156)
  • Plunge Turning Plunge Turning (230)
  • Profiling Profiling (112)
  • Threading Threading (160)
Workpiece Material
  • P Steel (551)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (551)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (551)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (551)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (551)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (551)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (551)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (551)
  • M Stainless Steel (496)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (496)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (496)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (496)
  • K Cast Iron (543)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (543)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (543)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (543)
  • N Non-Ferrous Materials (554)
    • N1
      Wrought Aluminum
      (554)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (501)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (250)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (554)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (501)
    • N6
      Carbon, Graphite Composites, CFRP
      (501)
    • N7
      MMC's
      (250)
  • S High-Temp Alloys (541)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (541)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (541)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (541)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (541)
  • H Hardened Materials (375)
    • H1
      Hardened Materials 44-48 HRC
      (375)
    • H2
      Hardened Materials 48-55 HRC
      (279)
    • H3
      Hardened Materials 56-60 HRC
      (155)
    • H4
      Hardened Materials >60 HRC
      (155)
Type of Thread
  • 60 (233)
  • ACME (170)
  • API (155)
  • API RD (120)
  • BSW (104)
  • BUTTRESS (228)
  • M (143)
  • NPT (106)
  • STUB ACME (104)
  • UN (228)
  • UNJ (104)
Cutting Condition
  • Heavily Interrupted Cut (454)
  • Lightly Interrupted Cut (461)
  • Smooth Cut (529)
  • Varying Depth of Cut (502)
Cutting Condition Material
  • H-All (410)
  • K-All (481)
  • M-All (451)
  • N-All (492)
  • P-All (461)
  • S-All (492)
Tool Cutting Edge Angle
  • 45.0 (14)
  • 90.0 (242)
to
Connection Style
  • Bolt-On Head (24)
  • Boring Bar Shank (72)
  • Toolholder (109)
Cutting Edges Per Insert
  • 1.0 (272)
  • 2.0 (753)
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
  • 0.051 (54)
  • 0.057 (50)
  • 0.066 (104)
  • 0.076 (233)
  • 0.08 (177)
  • 0.089 (73)
  • 0.09 (73)
  • 0.094 (104)
  • 0.097 (50)
  • 0.1 (177)
  • 0.102 (179)
  • 0.116 (54)
  • 0.117 (50)
  • 0.127 (106)
  • 0.131 (104)
  • 0.132 (104)
  • 0.133 (104)
  • 0.15 (104)
  • 0.155 (104)
  • 0.157 (104)
  • 0.16 (51)
  • 0.165 (155)
  • 0.173 (104)
  • 0.178 (104)
  • 0.185 (39)
  • 0.19 (228)
  • 0.191 (233)
  • 0.198 (104)
  • 0.2 (104)
  • 0.202 (143)
  • 0.224 (104)
  • 0.235 (104)
  • 0.244 (54)
  • 0.25 (143)
  • 0.251 (104)
  • 0.254 (194)
  • 0.269 (104)
  • 0.282 (104)
  • 0.284 (104)
  • 0.3 (104)
  • 0.315 (127)
  • 0.318 (160)
  • 0.33 (104)
  • 0.34 (104)
  • 0.343 (51)
  • 0.356 (104)
  • 0.404 (104)
  • 0.406 (120)
  • 0.43 (104)
  • 0.445 (155)
  • 0.472 (54)
  • 0.49 (104)
  • 0.5 (85)
  • 0.508 (104)
  • 0.565 (23)
  • 0.57 (50)
  • 0.572 (160)
  • 0.575 (105)
  • 0.75 (82)
  • 0.787 (257)
  • 0.826 (20)
  • 0.902 (155)
  • 1.0 (194)
  • 1.194 (237)
  • 1.195 (60)
  • 1.25 (191)
  • 1.5 (193)
  • 1.585 (120)
  • 1.588 (331)
  • 1.59 (30)
  • 1.75 (191)
  • 1.98 (57)
  • 1.981 (130)
  • 2.0 (170)
  • 2.25 (166)
  • 2.388 (223)
  • 2.39 (33)
  • 2.5 (56)
  • 3.175 (98)
  • 3.18 (29)
to
Corner Radius
  • 0.002 (54)
  • 0.0023 (50)
  • 0.0026 (104)
  • 0.003 (233)
  • 0.0031 (177)
  • 0.0035 (73)
  • 0.0037 (104)
  • 0.0038 (50)
  • 0.004 (179)
  • 0.0046 (104)
  • 0.005 (106)
  • 0.0052 (104)
  • 0.0053 (104)
  • 0.0059 (104)
  • 0.006 (104)
  • 0.0062 (104)
  • 0.0065 (155)
  • 0.0068 (104)
  • 0.007 (104)
  • 0.0075 (233)
  • 0.0078 (104)
  • 0.0079 (54)
  • 0.008 (143)
  • 0.0088 (104)
  • 0.0093 (104)
  • 0.0096 (54)
  • 0.0099 (104)
  • 0.01 (194)
  • 0.0106 (104)
  • 0.0111 (104)
  • 0.0112 (104)
  • 0.0118 (104)
  • 0.0124 (104)
  • 0.0125 (160)
  • 0.013 (104)
  • 0.0135 (155)
  • 0.014 (104)
  • 0.0159 (104)
  • 0.016 (120)
  • 0.017 (104)
  • 0.0175 (155)
  • 0.0186 (54)
  • 0.0193 (104)
  • 0.0197 (85)
  • 0.02 (104)
  • 0.0225 (160)
  • 0.0295 (82)
  • 0.031 (257)
  • 0.0325 (20)
  • 0.0355 (155)
  • 0.0394 (194)
  • 0.047 (247)
  • 0.0492 (191)
  • 0.0591 (193)
  • 0.0625 (354)
  • 0.0689 (191)
  • 0.078 (137)
  • 0.0787 (170)
  • 0.0886 (166)
  • 0.094 (228)
  • 0.0984 (56)
  • 0.106 (50)
  • 0.125 (104)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Drilling Condition
  • Heavily Interrupted Cut (201)
  • Lightly Interrupted Cut (208)
  • Smooth Cut (276)
  • Varying Depth of Cut (249)
Drilling Condition Material
  • H-All (157)
  • K-All (228)
  • M-All (198)
  • N-All (239)
  • P-All (208)
  • S-All (239)
Grade Of Cutting Tool
  • K1 (5)
  • K2885 (177)
  • K313 (242)
  • K420 (264)
  • K4H (138)
  • K68 (292)
  • KB1345 (155)
  • KB1630 (155)
  • KB5625 (104)
  • KC250 (182)
  • KC5010 (324)
  • KC5025 (320)
  • KC5410 (241)
  • KC710 (228)
  • KC720 (241)
  • KC722 (228)
  • KC730 (308)
  • KC732 (108)
  • KC810 (269)
  • KC850 (296)
  • KC910 (138)
  • KC9110 (253)
  • KC9120 (104)
  • KC9320 (255)
  • KC935 (235)
  • KC950 (238)
  • KCK20 (192)
  • KCK20B (228)
  • KCP10B (228)
  • KCP25B (228)
  • KCU10 (301)
  • KCU25 (292)
  • KD050 (54)
  • KD081 (104)
  • KD100 (127)
  • KD120 (155)
  • KD1425 (104)
  • KT175 (177)
  • KT315 (236)
  • KU10T (240)
  • KU25T (228)
  • KU30T (240)
  • KY3000 (155)
Hand Of Tool
  • L (93)
  • R (113)
Minimum Axial Groove Diameter
  • 0.0 (104)
  • 0.44 (2)
  • 0.453 (2)
  • 0.728 (2)
  • 0.73 (4)
  • 0.8 (1)
  • 0.866 (2)
  • 0.8661 (2)
  • 1.0 (4)
  • 1.0236 (1)
  • 1.024 (2)
  • 1.125 (4)
  • 1.339 (4)
  • 1.375 (6)
  • 1.5 (4)
  • 1.626 (47)
  • 1.7323 (2)
  • 1.75 (6)
  • 1.874 (47)
  • 1.9685 (2)
  • 2.0 (5)
  • 2.126 (4)
  • 2.2 (4)
  • 2.229 (30)
  • 2.25 (11)
  • 2.252 (20)
  • 2.375 (4)
  • 2.5 (27)
  • 2.75 (8)
  • 2.7559 (2)
  • 2.875 (2)
  • 3.0 (12)
  • 3.25 (6)
  • 3.5 (127)
  • 3.937 (1)
  • 4.75 (1)
  • 5.0 (2)
  • 5.5 (242)
  • 5.75 (5)
  • 6.874 (47)
  • 8.252 (107)
  • 8.752 (20)
  • 13.11 (4)
to
Minimum Axial Groove Diameter
  • 0.0 (104)
  • 11.176 (1)
  • 11.18 (1)
  • 11.5 (2)
  • 18.5 (2)
  • 18.542 (4)
  • 20.32 (1)
  • 22.0 (4)
  • 25.4 (4)
  • 26.0 (3)
  • 28.575 (3)
  • 28.58 (1)
  • 34.0 (4)
  • 34.92 (2)
  • 34.925 (4)
  • 38.1 (4)
  • 41.3 (47)
  • 44.0 (2)
  • 44.45 (6)
  • 47.6 (47)
  • 50.0 (2)
  • 50.8 (5)
  • 54.0 (4)
  • 55.88 (4)
  • 56.625 (30)
  • 57.15 (11)
  • 57.2 (20)
  • 60.325 (4)
  • 63.5 (27)
  • 69.85 (8)
  • 70.0 (2)
  • 73.025 (2)
  • 76.2 (12)
  • 82.55 (6)
  • 88.9 (127)
  • 100.0 (1)
  • 120.65 (1)
  • 127.0 (2)
  • 139.7 (242)
  • 146.05 (5)
  • 174.6 (47)
  • 209.6 (107)
  • 222.3 (20)
  • 333.0 (4)
to
Maximum Axial Groove Diameter
  • 9999.0 (571)
to
Maximum Axial Groove Diameter
  • 393.661 (571)
to
Cutting Direction
  • E (109)
  • S (97)
Rake Angle Style
  • NEUTRAL (ZERO) (205)
Maximum Bore Depth
  • 25.4 (12)
  • 31.26 (1)
  • 31.3 (1)
  • 32.8 (1)
  • 38.1 (1)
  • 48.0 (2)
  • 50.8 (33)
  • 63.48 (1)
  • 63.5 (2)
  • 64.0 (2)
  • 76.2 (4)
  • 80.0 (2)
  • 95.25 (2)
  • 96.0 (2)
  • 100.0 (4)
  • 101.6 (6)
  • 114.3 (2)
  • 120.0 (1)
  • 127.0 (6)
  • 128.0 (2)
  • 152.4 (9)
  • 160.0 (4)
  • 177.8 (10)
  • 200.0 (2)
  • 203.2 (14)
  • 228.6 (2)
  • 254.0 (12)
to
Maximum Bore Depth
  • 1.0 (12)
  • 1.231 (1)
  • 1.235 (1)
  • 1.29 (1)
  • 1.5 (1)
  • 1.88 (2)
  • 2.0 (33)
  • 2.5 (3)
  • 2.52 (2)
  • 3.0 (4)
  • 3.16 (2)
  • 3.75 (2)
  • 3.7758 (2)
  • 3.92 (2)
  • 3.936 (2)
  • 4.0 (6)
  • 4.5 (2)
  • 4.7244 (1)
  • 5.0 (6)
  • 5.0392 (2)
  • 6.0 (9)
  • 6.2992 (4)
  • 7.0 (10)
  • 7.874 (2)
  • 8.0 (14)
  • 9.0 (2)
  • 10.0 (12)
to
Boring Bar Material
  • C (11)
  • S (86)
Wiper Insert
  • N (800)
frontEnd
Clamp Style
  • N (254)
  • S (1)
Insert Shape
  • TN-TOP NOTCH (804)
Cutting Width
  • 0.5 (73)
  • 0.787 (78)
  • 0.8 (73)
  • 0.889 (73)
  • 0.991 (73)
  • 1.0 (189)
  • 1.041 (73)
  • 1.19 (123)
  • 1.194 (182)
  • 1.199 (39)
  • 1.2 (177)
  • 1.39 (73)
  • 1.397 (73)
  • 1.4 (73)
  • 1.473 (73)
  • 1.5 (186)
  • 1.56 (39)
  • 1.57 (144)
  • 1.575 (256)
  • 1.69 (73)
  • 1.7 (73)
  • 1.702 (73)
  • 1.75 (177)
  • 1.829 (104)
  • 1.94 (73)
  • 1.95 (73)
  • 1.956 (73)
  • 1.981 (104)
  • 2.0 (194)
  • 2.007 (73)
  • 2.2 (177)
  • 2.235 (177)
  • 2.24 (127)
  • 2.25 (123)
  • 2.388 (242)
  • 2.39 (60)
  • 2.464 (104)
  • 2.5 (191)
  • 2.667 (104)
  • 2.74 (73)
  • 2.743 (177)
  • 2.75 (177)
  • 2.794 (104)
  • 2.997 (177)
  • 3.0 (244)
  • 3.099 (104)
  • 3.17 (120)
  • 3.175 (331)
  • 3.18 (64)
  • 3.2 (228)
  • 3.245 (73)
  • 3.25 (104)
  • 3.251 (177)
  • 3.27 (73)
  • 3.32 (54)
  • 3.329 (54)
  • 3.5 (242)
  • 3.607 (104)
  • 3.73 (39)
  • 3.81 (73)
  • 3.84 (73)
  • 3.96 (111)
  • 3.962 (122)
  • 3.974 (62)
  • 3.988 (104)
  • 4.0 (170)
  • 4.24 (50)
  • 4.242 (155)
  • 4.25 (54)
  • 4.3 (104)
  • 4.5 (166)
  • 4.521 (104)
  • 4.699 (132)
  • 4.775 (210)
  • 4.78 (33)
  • 4.785 (34)
  • 4.788 (30)
  • 4.8 (104)
  • 4.801 (155)
  • 4.81 (104)
  • 4.88 (54)
  • 4.95 (104)
  • 5.0 (56)
  • 5.004 (56)
  • 5.131 (51)
  • 5.41 (51)
  • 5.5 (51)
  • 5.537 (15)
  • 5.563 (51)
  • 6.0 (56)
  • 6.35 (118)
  • 6.36 (29)
  • 6.48 (51)
  • 7.01 (5)
  • 7.137 (20)
  • 7.925 (20)
  • 8.001 (3)
  • 8.738 (5)
  • 8.992 (5)
  • 9.525 (20)
  • 9.65 (5)
  • 9.73 (15)
to
Cutting Width
  • 0.0197 (73)
  • 0.031 (78)
  • 0.0315 (73)
  • 0.035 (73)
  • 0.039 (73)
  • 0.0394 (189)
  • 0.041 (73)
  • 0.047 (182)
  • 0.0472 (177)
  • 0.055 (73)
  • 0.0551 (73)
  • 0.058 (73)
  • 0.0591 (186)
  • 0.062 (262)
  • 0.0669 (73)
  • 0.067 (73)
  • 0.0689 (177)
  • 0.072 (104)
  • 0.076 (73)
  • 0.0768 (73)
  • 0.077 (73)
  • 0.078 (104)
  • 0.0787 (194)
  • 0.079 (127)
  • 0.0866 (177)
  • 0.088 (177)
  • 0.0886 (123)
  • 0.094 (252)
  • 0.097 (104)
  • 0.0984 (191)
  • 0.105 (104)
  • 0.108 (177)
  • 0.1083 (177)
  • 0.11 (104)
  • 0.118 (177)
  • 0.1181 (244)
  • 0.122 (104)
  • 0.125 (354)
  • 0.126 (228)
  • 0.1278 (73)
  • 0.128 (177)
  • 0.129 (73)
  • 0.131 (54)
  • 0.1378 (242)
  • 0.142 (104)
  • 0.147 (39)
  • 0.15 (73)
  • 0.151 (73)
  • 0.156 (137)
  • 0.157 (104)
  • 0.1574 (170)
  • 0.1575 (155)
  • 0.167 (155)
  • 0.1673 (54)
  • 0.169 (104)
  • 0.1771 (166)
  • 0.1772 (155)
  • 0.178 (104)
  • 0.185 (132)
  • 0.188 (228)
  • 0.189 (155)
  • 0.192 (54)
  • 0.195 (104)
  • 0.1969 (56)
  • 0.197 (56)
  • 0.202 (51)
  • 0.213 (51)
  • 0.2165 (51)
  • 0.2166 (23)
  • 0.218 (15)
  • 0.219 (51)
  • 0.2362 (56)
  • 0.25 (124)
  • 0.255 (51)
  • 0.276 (5)
  • 0.281 (20)
  • 0.312 (20)
  • 0.315 (3)
  • 0.344 (5)
  • 0.354 (5)
  • 0.375 (20)
  • 0.38 (5)
  • 0.383 (15)
to
Insert Size
  • 1 (5)
  • 2 (43)
  • 3 (50)
  • 4 (20)
  • 5 (1)
  • 6 (2)
Maximum Cutting Depth
  • 1.016 (1)
  • 1.6 (2)
  • 1.69 (1)
  • 1.78 (2)
  • 1.9 (1)
  • 3.3 (1)
  • 3.505 (24)
  • 3.51 (19)
  • 5.33 (18)
  • 5.334 (30)
  • 5.715 (1)
  • 6.35 (3)
  • 7.46 (9)
  • 7.468 (15)
  • 7.47 (7)
  • 7.62 (2)
  • 8.484 (6)
  • 10.54 (3)
  • 10.541 (2)
to
Maximum Cutting Depth
  • 0.04 (1)
  • 0.063 (2)
  • 0.067 (1)
  • 0.07 (2)
  • 0.075 (1)
  • 0.13 (1)
  • 0.138 (42)
  • 0.1382 (1)
  • 0.21 (48)
  • 0.225 (1)
  • 0.25 (3)
  • 0.294 (31)
  • 0.3 (2)
  • 0.334 (6)
  • 0.415 (5)