MENU

  • {{searchText}} in ({{typeAhead.level3}} / {{typeAhead.level4}})
    • English
    • Deutsch
    • 简体中文
    • Français
    • Italiano
    • Português
    • 日本語
    • India
    • 한국어
    • Español
    • Türkçe
    • Polski
    • Český
    • Pусский язык
     

Proven Performance

Use Case

  • Machine: Wirtgen W210i (2180h)
  • Engine Power: 283 + 231 kW
  • Line Spacing: 25mm (Eco Cutter Drum)
  • Width of drum: 2000mm
  • Holders: HT22 (almost new, good condition)
  • Holders on drum: 100
  • Belt condition: Good
  • Track pad condition: Medium

Total Cutting Performance

  • Total m²: 19.283 m² 
  • Total m³: 1.353 m³
  • Total tons: 3.247 tons (density: 2400kg/m³)
  • Total fuel (PCD): 830l + 467l = 1297l
  • Total fuel (Carbide): 834l + 500l = 1334l
Road King Extreme Performance

Road King Xtreme vs. a convential tool body after 20,000m2 of asphalt

Yellow Line
RKE Case Study 3.4

Majority of tools after 77,000m² of asphalt

Use Case

  • Machine: Wirtgen W210XP
  • Holder System: HT22 (new)
  • Cutting Width: 2,200mm
  • Line Spacing: 10mm
  • Material: Asphalt (medium hard)
  • Cutting Depth: 2 – 6cm
  • Velocity: Varying up to 30m/min

Milling Performance

  • Total square meter: 77,000
  • Cutting depth average: 4cm
  • Total cubic meters: 3,080
Yellow Line

Use Case

  • Machine: Wirtgen W150 CFI
  • Holder System: HT22 (new)
  • Cutting Width: 1,500mm
  • Line Spacing: 18mm
  • Material: Asphalt (very hard)
  • Cutting Depth: Varying up to 16cm
  • Velocity: Varying up to 25m/min

Tool Performance

  • Time in use: 65h
  • Total tons: 5,802
  • Total square meters: 28,372
  • Total cubic meters: 2,321
  • Depending on application this equals approx. 11 sets of conventional carbide tools
RKE Case Study 2.1

Balanced wear on all units after milling more than 65 hours

Yellow Line
RKE Case Study 4.2

Use Case

  • Machine: Wirtgen W250
  • Cutting Width: 3,800mm
  • Material: Asphalt (high proportion of quartz)
  • Cutting Depth: 5cm
  • Velocity: 20m/min
  • Fuel Consumption: 235 liters / 4h

Tool Performance

  • In this case, conventional tools are changed three times per shift. Each change takes roughly 20 minutes. 
  • Time needed with conventional tools: 4.0 Hours
  • Time needed with Road King Xtreme: 2.5 Hours
Yellow Line

Have Questions?

Let our skilled staff show you how Road King Xtreme can help save time, money and increase productivity.

 

page-break-dark