Search results for
Filters
Filters
View filters in
Metric
Inch
Workpiece Material
Workpiece Material
-
P Steel (97)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (97)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (97)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (97)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (97)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (97)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (91)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (91)
-
-
M Stainless Steel (95)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (95)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (95)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (95)
-
-
K Cast Iron (91)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (91)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (91)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (91)
-
-
N Non-Ferrous Materials (88)
-
N1Wrought Aluminum (88)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (88)
-
N3High-Silicon Aluminum Alloys Si >12.2% (88)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100 (82)
-
N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (88)
-
N6Carbon, Graphite Composites, CFRP (82)
-
N7MMC's (68)
-
-
S High-Temp Alloys (88)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (88)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (88)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (88)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (88)
-
-
H Hardened Materials (6)
-
H1Hardened Materials 44-48 HRC (6)
-
H2Hardened Materials 48-55 HRC (6)
-
H3Hardened Materials 56-60 HRC (6)
-
H4Hardened Materials >60 HRC (6)
-
Select First Choice
-
BR (17)
-
CN (28)
-
DE (28)
-
GB (27)
-
IN (30)
-
SG (24)
-
US (31)
Cutting Condition
Cutting Condition
-
Interrupted (77)
-
Stable (96)
-
Unstable (89)
Cutting Edges Per Insert
Cutting Edges Per Insert
-
1.0 (5)
-
3.0 (106)
to
Corner Radius
Corner Radius
-
0.016 in (35)
-
0.024 in (2)
-
0.031 in (65)
-
0.034 in (9)
to
Corner Radius
Corner Radius
-
0.4 mm (35)
-
0.601 mm (2)
-
0.8 mm (65)
-
0.851 mm (9)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
-
KC7140 (22)
-
KC720 (8)
-
KC7215 (2)
-
KCMS35 (8)
-
KCPK10 (12)
-
KCU25 (21)
-
KCU40 (27)
-
KD1425 (5)
-
KMF (6)
Insert Geometry
Insert IC Size
Insert IC Size
-
5.0 mm (7)
-
6.0 mm (28)
-
8.0 mm (17)
-
10.0 mm (18)
-
12.0 mm (17)
-
15.0 mm (15)
-
17.6 mm (9)
to
Insert IC Size
Insert IC Size
-
0.197 in (7)
-
0.237 in (28)
-
0.315 in (17)
-
0.394 in (18)
-
0.473 in (17)
-
0.591 in (15)
-
0.694 in (9)
to
Cutting Edge Length
Cutting Edge Length
-
3.301 mm (7)
-
3.975 mm (28)
-
5.2 mm (1)
-
5.301 mm (16)
-
6.525 mm (1)
-
6.625 mm (17)
-
7.851 mm (1)
-
7.95 mm (16)
-
9.826 mm (1)
-
9.925 mm (14)
-
11.525 mm (1)
-
11.625 mm (4)
-
11.65 mm (4)
to
Cutting Edge Length
Cutting Edge Length
-
0.13 in (7)
-
0.156 in (28)
-
0.206 in (1)
-
0.209 in (16)
-
0.257 in (1)
-
0.261 in (17)
-
0.309 in (1)
-
0.313 in (16)
-
0.387 in (1)
-
0.391 in (14)
-
0.454 in (1)
-
0.458 in (4)
-
0.459 in (4)
to
Chip Breaker CBMD
Chip Breaker CBMD
-
DS (6)
-
GD (23)
-
HD (4)
-
HP (40)
-
LD (6)
-
MD (27)
Cutting Tool Material
Cutting Tool Material
-
D P (5)
-
H W (106)
No filters matching ""
KenTIP™ FS Modular Drill System
The KenTIP™ FS modular drill system delivers substantial cost savings and process simplifications on your shop floor. Choose from several inserts and bodies.
KCP25C
Kennametal KCP25C steel turning grade with KENGold CVD coating technology has a uniform structure to protect against wear while the gold flank aids in wear identification.
Stellram 5230 VS12 Shell Mills & Inserts
Stellram® 5230 VS12 shell mills and inserts from Kennametal are the perfect choices for shoulder mill operations. They improve stability and reduce tool wear.
KSSM 90° • IC 10mm
Kennametal offers a KSSM™ 90° IC 10mm indexable shoulder mill line for your machining operations. Choose either shell mills or Weldon shanks for your inserts.
5230 VS09 Helical End Mills • Stellram
KSSM 90° • IC 12mm
Mill 4
90° Shoulder Milling to the extreme. The Mill 4 Series is specially engineered to achieve excellent surface quality and higher metal removal rates in shoulder milling applications.
fam
fam
fam
fam