SVU • Bridge Tools
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (24)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(24)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(24)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(24)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(24)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(24)
- M Stainless Steel (24)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(24)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(24)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(24)
- K Cast Iron (24)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(24)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(24)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(24)
- N Non-Ferrous Materials (24)
- N1Wrought Aluminum (24)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(24)
- N3High-Silicon Aluminum Alloys Si >12.2%(24)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (24)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (24)
- N6Carbon, Graphite Composites, CFRP (24)
- N7MMC's (24)
- S High-Temp Alloys (24)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(24)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(24)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(24)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(24)
- H Hardened Materials (24)
- H1Hardened Materials 44-48 HRC(24)
- H2Hardened Materials 48-55 HRC(24)
- H3Hardened Materials 56-60 HRC(24)
- H4Hardened Materials >60 HRC(24)
Applications
Applications
Blind Hole Finishing (8)
Multiple Direction Cutting (2)
Through Hole Finishing (8)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (9)
- Lightly Interrupted Cut (9)
- Smooth Cut (9)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (9)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (2)
- 2.0 (2)
- 4.0 (2)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 19.7 mm(7)
- 45.7 mm(1)
- 70.7 mm(1)
to
Corner Radius
Corner Radius
- 0.1 mm(24)
- 0.2 mm(24)
- 0.3 mm(23)
- 0.4 mm(24)
- 0.8 mm(24)
to
Corner Radius
Corner Radius
- 0.004 in(24)
- 0.008 in(24)
- 0.012 in(23)
- 0.016 in(24)
- 0.031 in(24)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(7)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (24)
- K68 (24)
- KB1345 (24)
- KB1610 (16)
- KB1630 (24)
- KB5610 (23)
- KB5630 (24)
- KBH10B (24)
- KBH20 (24)
- KBH20B (24)
- KC5010 (24)
- KC5025 (24)
- KC5410 (24)
- KC730 (24)
- KC850 (24)
- KCK05 (23)
- KCK15 (23)
- KCK15B (24)
- KCK20 (24)
- KCK20B (23)
- KCM15 (24)
- KCM15B (23)
- KCM25 (24)
- KCM25B (24)
- KCP05 (16)
- KCP10 (24)
- KCP10B (24)
- KCP10C (24)
- KCP25 (24)
- KCP25B (24)
- KCP25C (24)
- KCP30 (23)
- KCPK05 (23)
- KCS10 (24)
- KCS10B (24)
- KCU10 (24)
- KCU10B (24)
- KCU25 (24)
- KCU25B (24)
- KD1400 (24)
- KD1405 (23)
- KD1425 (24)
- KM1 (23)
- KT315 (24)
- KT325 (23)
- KTP10 (23)
Wiper Insert
Wiper Insert
- N (2)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 14.0 mm(1)
- 22.0 mm(1)
- 25.0 mm(1)
- 29.5 mm(1)
- 34.0 mm(2)
- 40.5 mm(1)
- 47.0 mm(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 21.0 mm(1)
- 29.0 mm(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 45.7 mm(1)
- 70.7 mm(1)
to
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (8)
- T-TRIANGLE 60 (1)
Cartridge Size
Cartridge Size
- 1E. (1)
- 1F. (1)
- 2E. (1)
- 2F. (1)
- 3E. (1)
- 3F. (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 10.5 mm(1)
- 14.5 mm(1)
to
Gage Length
Gage Length
- 25.0000 mm(1)
- 28.0000 mm(5)
- 110.0000 mm(2)
- 152.0000 mm(2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (9)
- B L (9)
- D P (9)
- H T (9)
- H W (9)
Back-End
System Size
System Size
- KR50 (2)
- KR80 (2)
Back-End Diameter
Back-End Diameter
- 16.0 mm(2)
to
No filters matching ""
