Kenloc™ • M-Style Clamping • For Negative Style Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (679)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(679)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(679)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(679)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(679)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(679)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(679)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(679)
- M Stainless Steel (678)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(678)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(678)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(678)
- K Cast Iron (672)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(672)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(672)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(672)
- N Non-Ferrous Materials (590)
- N1Wrought Aluminum (570)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(570)
- N3High-Silicon Aluminum Alloys Si >12.2%(255)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (590)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (560)
- N6Carbon, Graphite Composites, CFRP (544)
- N7MMC's (560)
- S High-Temp Alloys (665)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(665)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(665)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(665)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(663)
- H Hardened Materials (532)
- H1Hardened Materials 44-48 HRC(532)
- H2Hardened Materials 48-55 HRC(532)
- H3Hardened Materials 56-60 HRC(532)
- H4Hardened Materials >60 HRC(382)
Applications
Applications
Chamfer Turning (45)
Facing (438)
ID Facing (2)
Multiple Direction Cutting (436)
Plunge Turning (55)
Profiling (481)
TRN Boring (142)
Turning (669)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (677)
- Lightly Interrupted Cut (679)
- Smooth Cut (679)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (60)
- 48.0 (6)
- 49.783 (2)
- 50.0 (15)
- 60.0 (12)
- 62.5 (13)
- 63.0 (4)
- 72.5 (12)
- 75.0 (144)
- 90.0 (91)
- 93.0 (164)
- 95.0 (121)
- 107.5 (36)
- 117.5 (2)
to
Connection Style
Connection Style
- KM (119)
- Toolholder (437)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (291)
- 2.0 (400)
- 3.0 (115)
- 4.0 (500)
- 6.0 (142)
- 8.0 (309)
to
Over All Length [L]
Over All Length [L]
- 35.0 mm(17)
- 40.0 mm(49)
- 45.0 mm(2)
- 50.0 mm(67)
- 60.0 mm(62)
- 70.0 mm(41)
- 100.0 mm(4)
- 101.6 mm(10)
- 114.295 mm(1)
- 114.3 mm(61)
- 115.0 mm(7)
- 125.0 mm(18)
- 127.0 mm(35)
- 141.5 mm(2)
- 150.0 mm(45)
- 152.4 mm(181)
- 170.0 mm(40)
- 171.25 mm(5)
- 172.5 mm(2)
- 177.8 mm(24)
- 200.0 mm(3)
- 203.2 mm(5)
- 457.2 mm(1)
to
Corner Radius
Corner Radius
- 0.004 in(255)
- 0.008 in(268)
- 0.014 in(47)
- 0.016 in(503)
- 0.024 in(20)
- 0.031 in(633)
- 0.047 in(618)
- 0.063 in(510)
- 0.094 in(193)
- 0.125 in(43)
- 0.126 in(53)
- 0.157 in(38)
- 0.188 in(1)
- 0.25 in(20)
- 0.375 in(6)
- 0.5 in(2)
to
Corner Radius
Corner Radius
- 0.1 mm(255)
- 0.2 mm(268)
- 0.35 mm(47)
- 0.4 mm(503)
- 0.6 mm(20)
- 0.8 mm(633)
- 1.2 mm(618)
- 1.6 mm(510)
- 2.375 mm(59)
- 2.4 mm(193)
- 3.175 mm(43)
- 3.2 mm(53)
- 4.0 mm(38)
- 4.775 mm(1)
- 6.35 mm(20)
- 9.525 mm(6)
- 12.7 mm(2)
to
Application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (178)
- CW3020 (2)
- CW5025 (94)
- K060 (79)
- K090 (100)
- K1 (38)
- K313 (560)
- K68 (572)
- KB1340 (147)
- KB1345 (178)
- KB1610 (308)
- KB1630 (235)
- KB5610 (188)
- KB5630 (188)
- KB9640 (2)
- KBH10 (355)
- KBH10B (355)
- KBH20 (355)
- KBH20B (355)
- KBK45 (2)
- KC5010 (653)
- KC5025 (567)
- KC5410 (476)
- KC730 (480)
- KC850 (641)
- KC9125 (24)
- KCK05 (436)
- KCK05B (199)
- KCK15 (550)
- KCK15B (564)
- KCK20 (588)
- KCK20B (514)
- KCM15 (531)
- KCM15B (548)
- KCM25 (575)
- KCM25B (596)
- KCM35 (565)
- KCM35B (302)
- KCP05 (368)
- KCP05B (421)
- KCP10 (631)
- KCP10B (647)
- KCP10C (647)
- KCP25 (631)
- KCP25B (649)
- KCP25C (675)
- KCP30 (632)
- KCP30B (482)
- KCP40 (540)
- KCP40B (592)
- KCPK05 (525)
- KCS10 (79)
- KCS10B (555)
- KCU10 (659)
- KCU10B (651)
- KCU25 (603)
- KCU25B (603)
- KD1400 (235)
- KD1405 (188)
- KD1425 (255)
- KS15 (79)
- KT315 (387)
- KT325 (79)
- KTP10 (382)
- KTP25S (302)
- KY1540 (81)
- KY1615 (4)
- KY3500 (514)
- KY4300 (226)
- KY4400 (447)
- KYHK15B (528)
- KYK10 (231)
- KYK25 (338)
- KYS25 (134)
- KYS30 (206)
- PB100 (20)
- SP0819 (522)
- SP4019 (358)
- THM (94)
- THM-X (79)
- THMF-X (55)
- TN10P (191)
- TN10U (138)
- TN15M (118)
- TN15U (115)
- TN2000 (140)
- TN20K (207)
- TN20P (210)
- TN30M (132)
- TN30P (154)
- TN4000 (140)
- TN6010 (56)
- TTR-X (16)
- TTS (73)
- WBH10P (80)
- WBH10U (20)
- WBH20P (161)
- WBH30P (80)
- WBK40U (23)
- WBK45U (31)
- WDN00U (51)
- WDN25U (102)
- WK05CT (232)
- WK15CT (111)
- WK20CT (232)
- WM15CT (216)
- WM25CT (232)
- WM35CT (195)
- WP05CT (30)
- WP15CT (242)
- WP25CT (242)
- WP35CT (242)
- WS10PT (216)
- WS25PT (226)
- WU10HT (210)
- WU10PT (161)
- WU25PT (161)
- X00580 (79)
- X00581 (79)
- X00582 (79)
- X00583 (79)
- X00584 (79)
- X00585 (79)
- X00586 (79)
- X00591 (79)
- X00592 (79)
- X00593 (79)
- X00594 (79)
- X00596 (79)
- X00597 (79)
- X00599 (79)
Hand Of Tool
Hand Of Tool
- L (226)
- N (79)
- R (251)
Wiper Insert
Wiper Insert
- N (681)
- Y (198)
F Dimension
F Dimension
- 0.0 mm(19)
- 6.35 mm(2)
- 7.938 mm(1)
- 7.94 mm(1)
- 8.0 mm(1)
- 9.52 mm(1)
- 9.525 mm(5)
- 10.0 mm(4)
- 12.0 mm(5)
- 12.23 mm(1)
- 12.25 mm(1)
- 12.5 mm(7)
- 12.7 mm(16)
- 13.76 mm(1)
- 13.764 mm(1)
- 15.799 mm(1)
- 15.87 mm(1)
- 15.875 mm(9)
- 15.88 mm(2)
- 16.0 mm(1)
- 16.82 mm(1)
- 17.0 mm(2)
- 19.05 mm(10)
- 19.075 mm(2)
- 19.685 mm(1)
- 19.688 mm(1)
- 20.0 mm(4)
- 20.5 mm(1)
- 21.031 mm(2)
- 22.0 mm(20)
- 22.22 mm(2)
- 22.225 mm(4)
- 22.352 mm(2)
- 23.165 mm(5)
- 24.0 mm(5)
- 25.0 mm(11)
- 25.197 mm(2)
- 25.4 mm(46)
- 25.5 mm(1)
- 26.416 mm(1)
- 27.0 mm(20)
- 27.381 mm(2)
- 28.016 mm(2)
- 28.7 mm(2)
- 30.0 mm(10)
- 31.75 mm(81)
- 31.775 mm(6)
- 32.0 mm(51)
- 33.55 mm(2)
- 34.366 mm(2)
- 35.0 mm(10)
- 35.006 mm(1)
- 38.0 mm(8)
- 38.1 mm(49)
- 38.125 mm(3)
- 38.379 mm(2)
- 40.0 mm(10)
- 40.5 mm(8)
- 43.0 mm(12)
- 44.958 mm(1)
- 46.25 mm(3)
- 48.0 mm(8)
- 50.0 mm(2)
- 50.8 mm(37)
- 50.826 mm(1)
- 53.0 mm(16)
- 57.15 mm(1)
- 57.658 mm(1)
- 63.5 mm(2)
to
Minimum Bore Diameter
Minimum Bore Diameter
- 106.0 mm(10)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 44.0 mm(2)
- 54.0 mm(22)
- 70.0 mm(27)
- 80.0 mm(2)
- 86.0 mm(34)
- 90.0 mm(4)
- 100.0 mm(23)
- 106.0 mm(25)
- 120.0 mm(2)
- 150.0 mm(1)
to
Cutting Direction
Cutting Direction
- B (106)
- E (73)
- S (377)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (470)
- NEGATIVE-ZERO (86)
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(4)
- 40.0 mm(26)
- 50.0 mm(41)
- 60.0 mm(38)
- 70.0 mm(26)
- 115.0 mm(7)
to
Boring Bar Material
Boring Bar Material
- S (10)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (188)
- D-DIAMOND/RHOMBIC 55 (121)
- R-ROUND (29)
- S-SQUARE 90 (130)
- T-TRIANGLE 60 (112)
- V-DIAMOND/RHOMBIC 35 (72)
- W-TRIGON 80 (30)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (323)
- B L (355)
- C A (538)
- C N (514)
- D P (302)
- H T (387)
- H W (681)
Back-End
Connection Type
Connection Type
- SQUARE SHANK (437)
- TAPER SHANK (119)
System Size
System Size
- KM32 (12)
- KM32TS (6)
- KM40TS (25)
- KM50TS (23)
- KM63TS (26)
- KM80TS (27)
Back-End Diameter
Back-End Diameter
- 32.0 mm(22)
- 40.0 mm(49)
- 50.0 mm(64)
- 63.0 mm(69)
- 80.0 mm(41)
to
Shank Height
Shank Height
- 12.7 mm(9)
- 15.875 mm(7)
- 15.88 mm(3)
- 16.0 mm(4)
- 19.05 mm(54)
- 20.0 mm(18)
- 25.0 mm(47)
- 25.4 mm(112)
- 31.75 mm(82)
- 32.0 mm(47)
- 38.1 mm(48)
- 40.0 mm(3)
- 50.8 mm(3)
to
Shank Width
Shank Width
- 12.7 mm(10)
- 15.875 mm(7)
- 15.88 mm(3)
- 16.0 mm(4)
- 19.05 mm(55)
- 20.0 mm(18)
- 25.0 mm(69)
- 25.4 mm(118)
- 31.75 mm(74)
- 32.0 mm(25)
- 38.1 mm(48)
- 40.0 mm(3)
- 50.8 mm(3)
to
No filters matching ""
